Upload
truongkhanh
View
223
Download
3
Embed Size (px)
Citation preview
Introduction to theLTE Physical Layer
Sandor Szilvasi06/29/2016
LTE-SAE Architecture
Source: Anritsu - LTE Resource Guide
LTE Protocol Stack
Source: Anritsu - LTE Resource Guide
Example Waveform (LTE Band 13)
UplinkDownlink
System Information
1. Cell ID = 3 * n_id_1 + n_id_22. MIB3. SIB (not covered here)
Downlink Channel Mapping
1
MIB SIB
3 24
Source: Erik Dahlman, Stefan Parkvall, and Johan Skold. 2013. 4G: LTE/LTE-Advanced for Mobile Broadband (2nd ed.). Academic Press.
50 RBs
1 subframe(1 ms)
1 frame(10 ms)
Demo
PSS
4k ...4k+1 4k+2 4k+3...
frame
subframe
SSS PBCH
Same MIB x4
Open-Source Projects
● OpenAirInterface (https://gitlab.eurecom.fr/oai/openairinterface5g/)● OpenLTE (http://openlte.sourceforge.net/)● srsLTE (https://github.com/srsLTE/srsLTE)● LTE-Cell-Scanner (https://github.com/Evrytania/LTE-Cell-Scanner)● gr-lte (https://github.com/kit-cel/gr-lte)● LTEye (http://www.mit.edu/~swarun/lteyecode.html)
Other Resources
● E-UTRA; Physical channels and modulation (3GPP TS 36.211 Release 13)● E-UTRA; Multiplexing and channel coding (3GPP TS 36.212 Release 13)● Erik Dahlman, Stefan Parkvall, and Johan Skold. 2013. 4G: LTE/LTE-
Advanced for Mobile Broadband (2nd ed.).● Matlab LTE System Toolbox Documentation
http://www.mathworks.com/help/lte/lte-modeling-basics.html● http://niviuk.free.fr/lte_band.php● http://dhagle.in/LTE● http://www.cellmapper.net/map