INTRALOGISTIC BELT SOLUTIONSMaking the logistical flow of material goods run smoothly is what matters in intralogistics, so your belt needs to be 100% reliable. The Gates intralogistics belt programme combines the durability of top-quality products with optimal lead times and a reliable partnership, making it the number one choice for polyurethane synchronous belts. Our belts are designed to meet the specific needs of demanding, high-performance applications in automated warehouse systems. The wide product range covers an extensive variety of applications, from micron-level positioning, to heavy-load lifting.

DEDICATED PRODUCT RANGE FROM THE SPECIALIST

LINEAR BELTS

High tensile strength open-ended linear belts are designed for high-load and dynamic linear movements. Therefore this type of belts is especially fit for horizontal and vertical drives in stacker cranes and mini-load warehouse systems. Endless welded belts work in intralogistic conveyor systems, take off-devices and shuttles.

� Wide variety of tooth pitch, length and material combinations

� Comprehensive range of possible configurations

WIDE BELTS

Gates wide timing belts are commonly used in applications demanding exact product positioning and conveyed products require additional width. Supplementary to flat conveyor belts, Gates wide belts offer synchronous conveying at start-stop-applications or when precise synchronisation is required. These belts are often used as process conveyor belts, when a process occurs on the product, while it is transported.

� Widths up to 450mm � Alternative to plastic modular chains and flat belting

BACKINGS

Most belt types can be modified by adding a backing material to achieve the desired coefficient of friction, abrasion resistance or thickness. Our highly efficient production processes and in-house backing capabilities can provide a belt which is ‘tailor made’ to your requirements.

� Over 30 backings offered (polyurethane, rubber, foam, PVC and engineered special backings)

� All backings can be modified mechanically on request

SPECIAL FABRICATIONS

From grinding edges or surfaces, to punching holes and removing individual teeth, Gates can mechanically modify all of its polyurethane belts to meet special application needs.

� Enhanced performance by modifications to teeth and/or belt back sides

� Added machining available (holes for vacuum draw, pockets for product reading and deposit recognition, slots for handling, and lateral grooves for venturing)

TRULY ENDLESS FLEX BELTS

SUPER Flex™ belts are truly endless extruded belts with helically wound steel cords specifically designed for demanding drives and heavy-load conveying applications. They can be installed with confidence in take-off devices and transfer conveyors with small pulley diameters.

� High flexibility, exceptional strength and stiffness � Customisation – unique labelling/branding options

Gates polyurethane synchronous belts come in all shapes and sizes: we design our belts together with you to answer your specific needs in various applications in automated warehouse systems. Nearly every belt type can be customised by adding backings, profiles or special machining. Our applications engineers can work with you to design any belt catering to your specific requirements.

THE PERFECT FIT WITH GATES INTRALOGISTICS BELTS

Gates belts are everywhere in the intralogistics environment. Our products can be found in shuttle systems, conveying technology such as live-roller conveyors (container conveying technology, sorter systems), stacker cranes, material lifts and warehouse management systems.

AKL - AUTOMATIC MINI-LOAD WAREHOUSE SYSTEMS

Gates high tensile strength open-ended linear belts are designed for high-load and dynamic linear movements, making them the perfect fit for horizontal and vertical drives in mini-load warehouse systems. For take-off devices, Gates offers endless welded belt with or without backings.

RGB - STACKER CRANES, PALLET STORAGE AND RETRIEVAL MACHINES

Lifting applications put much more strain on belts when it comes to tension. Gates high-load timing and flat belts provide extreme tensile strength and stiffness thanks to the extra strong steel reinforcement of the belt. Resistant to forces up to 370 kN, our belts even exceed the industry standards to help you design state-of-the-art machines ready for the future.

HPL14M

14

6 10

� High-performance synchronous belt � PolyChain® 14M tooth shape - runs in HTD pulley

� Higher load carrying capacity due to extra high strength steel cord

For take-off devices

T10 � With high friction backings

� Low temperature PU grades for cold storage available

� Endless welded or endless flexbelt for small pulley diameters

AT5

AT10

For vertical and horizontal movement

ATL10 � The optimal belt selection for your specific machine design

� With Nylon fabric on tooth side for less noise and low vibration

� Low temperature PU grades for cold storage available

� Various steel cord constructions for optimal tensile strength and high stiffness

AT20

ATL20

HTD8M

HTDL8M

HTD14M

HTDL14M

HPL14

THE PERFECT FIT WITH GATES INTRALOGISTICS BELTS

SHUTTLE-SYSTEMS

Gates power transmission belts drive the shuttles. Endless and open-ended PU belts work in telescope take-off systems in shuttles and Gates high-load open-end belts lift the boxes quietly and precisely to the conveyor systems.

INTRALOGISTIC-CONVEYING SYSTEMS

Wherever moving or conveying is an issue, you can rely on Gates’ polyurethane synchronous belts. Whether they are used for assembly lines in the food, the electronics or the automotive industries, in packaging lines or in luggage handling, Gates’ belts guarantee 100% reliability under the most diverse circumstances. Gates’ belts meet the needs of the materials handling and conveying industries.

HTD8M

8

5,63,4

� High modulus tensile members giving length stability

� Accurate positioning

� High resistance versus tooth jumping

� Low noise, low vibration drives

� Gates HTD belt are available in various designs to fulfill various requirements in intralogistic applications

GT3

3

1.12 2.41

� Substantially increased power ratings: up to 30% more than previous constructions

� Compact, light-weight and cost-effective drives

� High capacity belt with reduced noise levels

Flat Belts

F160 � For life roller drives

Timing Belts

T5ATB � Antistatic belt for transfer systems

T5 ECO � Antistatic low friction, high abrasion resistant belt for transfer systemsAT5 ECO

AT5 � For transfer conveyors

T10 � For general conveyors,  standard or low temperature PU gradeAT10

AT20 � For heavy load conveying

CUSTOMER EXPERIENCE TEAMKorte Keppestraat 21/51B-9320 EREMBODEGEMT +32 53 76 27 11ptindustrial@gates.com

GATES, YOUR INTRALOGISTICS SPECIALISTDEDICATED PRODUCT RANGE FROM THE SPECIALIST

Every day, design engineers, maintenance people, equipment manufacturers and their customers around the world rely on Gates’ in-depth knowledge of the intralogistics industry to keep them running smoothly, safely and reliably. We specialise in material science and custom engineering support which results in true intralogistic system solutions. Gates is the ideal partner for all your intralogisitc system design needs.

BROAD PRODUCT RANGE

Our extensive product range covering a wide variety of applications is able to cope just as easily with wide diversities of articles as packaging variants.

UNRIVALLED APPLICATION SUPPORT

Whatever your requirements, our engineering team can provide you with a solution that fits your application perfectly.

GLOBAL SERVICE

With production and distribution partners worldwide, Gates offers global service to solve your challenges.

RAPID DELIVERY

Gates is committed to fast response times on quotation requests and rapid delivery.

GATES.COM/EUROPE

The complete product program as well as technical data can be found in the catalogue available for download on our website. Information about further variants and special packaging is available on request.

E2/20212 | © GATES INDUSTRIAL CORPORATION | 03/2018