Note: If you should come across any other problems when setting up which you cannot resolve even with the use of these instructions, please contact us on 0800 800 800.

Troubleshooting

1 Does the «Power» light illuminate on your DSL modem? No > Check the mains adapter and power supply.

2 Does the «DSL» light illuminate on your DSL modem? No > The DSL line is disconnected or not switched on yet.

> Check the cabling between the DSL modem and the telephone socket. > Check the deadline for switching on DSL, or contact us on 0800 800 800.

3 Does at least one «Ethernet» light illuminate on your DSL modem? No > Check that your computer is properly connected to the DSL modem.

4 Are you using the supplied cable? No > Only use the supplied cable.

5 Is your Internet connection now working correctly? Unfortunately not > Contact us on 0800 800 800.

ISDN

SAP 123737 09/08

Internet SetupDSL modem (router)

Swisscom login user name

Swisscom login password

Serial number

Bluewin e-mail address

Watch list

Ethernet 1 2 3 4 L

S D

r e

w

o P

Ethernet 1 2 3 4 L

S D

r e

w

o P

on: The modem is connected us-ing a DSL cable.

flashing: The DSL connection is being started.

off: The DSL cable has been dis-connected.

on: The modem is correctly con-nected to the mains.

on (red): The modem is currently being started, or the power supply is inadequate.

off: The modem is not connected to the mains or is not swit-ched on.

Power

DSLEthernet 1 to Ethernet 4

on: A computer is correctly con-nected to the port.

flashing: Data is being received or trans-mitted via this connection.

off: There is no computer connect-ed to this port, or the compu-ter is switched off.

Useful information

Connecting other computersSetting up Swisscom DSL on another computerYou can also use your DSL Internet access on other computers in the same house.

Connecting the computer by cableYou have two options for connecting the computer to your DSL modem by cable:

Ethernet cable and the optical connection kit are not included with the modem and are available from the Swisscom Shop.Simply connect the computer to one of the free (Ethernet) ports on the back of the DSL modem and you‘ll be online.

Optional:

> 1. Ethernet cable You will require additional Ethernet cables in order to connect further computers to

the DSL modem by means of an Ethernet cable.

> 2. Optical connection kit You will require an Optical connection kit if you plan to connect another compu-

ter by optical fiber cable. Note: Optical-fiber cables are easier to lay in your apartment or house because they

are slim and insensitive to electrical interference.

2. Connecting equipment and cables

Ethernet cable (yellow)

1. Preparations

The following are included in the delivery package:

Check the contents of the package

Ethernet 1 2 3 4 L

S D

r e

w

o P

DSL modem (Motorola 3356) with mains adapter

Ethernet 1 2 3 4 L

S D

r e

w

o P

7 You can now connect your telephone to one of the «S» outlets of the ISDN device (NT) as you have done up to now or you can connect it to any telephone socket in your house.

1 Remove the telephone cable that leads to the telephone socket from your ISDN device and connect it to the split-ter («ADSL» connection).

2 Connect the Ethernet cable (black with green connec-tors) to the splitter («ISDN» outlet) and the ISDN device («U» outlet).

3 Connect the telephone cable (violet) to the splitter («split-ter» outlet) and the DSL modem («DSL» outlet).

4 Connect the Ethernet cable (yellow) to the DSL modem («Ethernet 1» outlet) and the computer («LAN / » outlet).

5 Connect the mains adapter to the DSL modem and the socket.

Warning: You must use the supplied mains adapter.

6 Now switch on the DSL modem and the computer. Note: Then wait until at least one «Ethernet», the «DSL»

and the «Power» lights illuminate on the DSL modem.

8 If you are a new customer, you still have to register your DSL. To do this, follow step 3 of this leaflet.

If you are an existing customer (i. e. you already have a Swisscom internet connection), you can now use the Internet.

Telephone socket

Telephone

Telephone cable (violet)Ethernet

4 3 2 1

Reset

Off / On O / l

DSL

DSL modem

Splitter

ISDN device (NT)

Ethernet cable (black)

Computer

4Ethernet cable (yellow)(can be up to 100 m in length)

Mains adapter

1

2

7

3

6

5

3 You will be guided through the registration step by step. Fill out all mandatory fields.

4 At the end of the registration, print out the data sheet and enter all the data in the watch list on the following page of this leaflet.

1 Start-up your browser (Internet Explorer, Firefox, Safari, Opera, etc.).

2 The DSL registration page will appear in your browser automatically.

If the registration page does not appear automatically, please refer to the next two notes.

Note: If your router (DSL modem) has not

yet been fully configured, a progress bar will be displayed. Wait until this process is complete and then continue to step 3.

Note: If neither the DSL registration page

nor the progress bar are displayed, enter «www.swisscom.ch» in the address field of the browser and press enter .

3. Register Swisscom DSLOnly for new customers:

To be able to use DSL as a new customer, you must first register it. (Existing customers do not need to register DSL.)

Telephone cables (black and violet)

Splitter