International Tube & Conduit Company Ltd. - pmceng.co.kr · • Electrical conduits: EMT, IMC, RMC, BS31, BS4568 FC & Fittings. • Tubes and hollow sections: round, square and

International Tube & Conduit Company Ltd.

GALVANIZING EDGE IN TUBE TECHNOLOGYT: +966 2 6060275 - F: +966 2 6061095 - P.O. Box 10374 Jeddah 21433 - KSAE-mail: [email protected] - www.itcc-group.com

ITCC is a major manufacturer of Steel Conduits, Steel

Tubes, Scaffolding and Construction Props, as well as

fence materials.

It operates a state-of-the-art manufacturing and

assembly facility located in King Abdullah Economic City.

ITCC also uses the latest technologies to produce

defect-free and high quality products and services

meeting the needs of customers across different

segments.

VISION STATEMENT COMPANY PROFILEWe strive to exceed our customers’ expectations

through leading edge technologies and managerial

advanced production solutions. ITCC is committed to

adding value, achieving trust, creativity and innovation in

providing galvanized and coated steel tubes.

ITCC produces the following range of products: • Electrical conduits: EMT, IMC, RMC, BS31, BS4568 FC & Fittings. • Tubes and hollow sections: round, square and rectangular. • Fence materials: chain link, barbed wire and concertina (Galvanized & PVC coated). • Scaffolding and construction props. • Steel fabrication. • Green houses & handrails.

ABOUT THE COMPANY


CERTIFICATES & LOCATION MAP

REVOLUTIONARY QUALITY PROCESS


THE ZINC-TECH IN-LINE GALVANIZED PRODUCT

Comparative table between Zinc-Tech,Pre-Galvanized and Galvanized Process

60K PSI

HDG30K PSI

206 N/mm2

Zinc-TechTM

50K PSI345 N/mm2

HDG48K PSI

331 N/mm2

Zinc-TechTM

55K PSI380 N/mm2

425 N/mm2

50K PSI 350 N/mm2

40K PSI 275 N/mm2

30K PSI 200 N/mm2

Finished Product Yield & Tensile ComparisonZinc-TechTM vs. Hot-Dipped Galvanized

66% increase

Yield

15% increase

Tensile

HDG1.315” x .133”

33.4mm x 3.4mm

HDG2.375” x .154”

60.3mm x 3.9mm

Zinc-TechTM

1.315” x .083”33.4mm x 2.1mm

Zinc-TechTM

2.375” x .095”60.3mm x 2.4mm

4.0 lb/ft 6.0 kg/M

3.0 lb/ft 4.5 kg/M

2.0 lb/ft

1.0 lb/ft 1.5 kg/M

3.0 kg/M

Finished Product Strength & Weight ComparisonZinc-TechTM vs. Hot-Dipped Galvanized

37% WeightSavings

35% WeightSavings

The characteristics of the Zinc-Tech™ process also provides

yet another distinct and very beneficial property to your finished

product, an increase in both tensile and yield strength.

Internal CoatingFully coated internal bore including welding seam.

Steel TubeA stronger tube with increased tensile and yield properties.

Hot Dip GalvanizingCompletely galvanized through immersion in molten zinc after forming and seam welding.

Conversion CoatingConversion coating is applied substantially which increases the zinc’s corrosion performance.

Organic CoatingAn optional organic coating can be applied to further enhance corrosion protection and lock in the finished products bright surface luster.

Entry Line Pre-Cleaning Forming and Welding Surface Preparation

CONDUITS

Steel conduits are recognized as providing the most mechanical protection to the enclosed wire

conductors. It is also recognized as an equipment grounding conductor.

We at ITCC produce our conduits by rolling our own tubing from high grade mild steel strips, welding

and hot dip galvanizing it, using our own Zinctech process that combines Zinc, a conversion coat and an

organic coating.

The inside of the conduits has a corrosion resistant lubricating coating for easier wire pulling.

Electrical Metallic Tubing EMT

Rigid Metal Conduit RMC

Intermediate Metal Conduit IMC

Flexible Conduit FC

Fittings

The resulting conduit has the following superior characteristics: • The best corrosion performance of any galvanized product.

• Increased tensile and yield for a stronger product.

• Better fabrication properties: cutting, bending and welding.

• Meet the Underwriter’s Laboratories Specifications UL 6, UL 797 and UL 1242 where applicable.

• A far superior finish and product appearance.

• Easy wire pulling.

• Provides shielding magnetic field.

Galvanizing Tube Cooling Calibration Secondary Coating Tube Cutoff and Bundling

EMT - ELECTRICAL METAL TUBE

EMT is a steel raceway of circular cross section

which is unthreaded.

The exterior is galvanized and protected by a clear

zinc coating. The interior is a smooth continuous

raceway and is coated with organic lubricants. It is

installed either indoors or outdoors in all conditions

and produced in trade size from ½ to 4.

EMT pipes are manufactured in accordance with the latest edition of the following: • American National Standards Institute – American National Standards for Steel (ANSI C80.3)

• Underwriters Laboratories Standard for Electrical Metallic Tubing (UL 797)

• 6M (EMT) 20 feet

• Fewer fittings

• Quick and Easy installation

• Listed to UL 797 Standard and ANSI C80.3

ELECTRICAL METALLIC TUBING - STEEL (WEIGHTS AND DIMENSIONS)

NOTES: Applicable tolerances Length: 10ft. (3.05 m) +/- ¼ in. (+/- 6.35 mm) (1) Outside Diameter: ½ - 2 +/- 0.015 in. (16 - 35 +/- 0.13 mm), 2 - ½ +/- 0.020 in. (91 - 103 +/- 0.51 mm). 3 +/- 0.015 in. (78 +/- 0.38 mm), 3 - ½ - 4 +/- 0.020 in. (91 - 103 +/- -0.51 mm.) (2) For information only, not a UL 797 requirement.


RMC is a threaded metal raceway of circular cross

sections with coupling which can either be standard

straight tapped conduit or integral type.

It is known as the heaviest weight and thickest steel

conduit.

RMC pipes are manufactured in accordance with the latest edition of the following: • American National Standards for Electrical Rigid Steel Conduit (ANSI C80.1)

• Underwriters Laboratories Standards for Electrical Rigid Conduit (UL 6)

Save with the length when purchasing the 6M RMC: • 6M (RMC) 20 feet

• Fewer Fittings

• Quick and Easy Installation

• Listed to the UL 6 Standard and ANSI C80.1

RIGID METAL CONDUIT - STEEL (WEIGHTS AND DIMENSIONS)

It has a coating of zinc on both outside and inside

surfaces. It is also non-combustible and can be

used indoors, outdoors, underground, concealed or

exposed.

RMC - RIGID METAL CONDUIT

EM

T - R

MC


NOTES: From 2 ½” and higher, figures are hot-dip galvanized conduit.

IMC - INTERMEDIATE METAL CONDUIT

Made of high quality flat rolled steel and produced

using an electric resistance welding process. Listed

threaded steel raceway of circular cross sections

with the coupling which can be either a standard

straight-tapped conduit or integral type.

IMC pipes are manufactured in accordance with the latest edition of the following: • American National Standards Institute – American National Standards for Electrical Intermediate Metal

Conduit (ANSI C80.6)

• Underwriters Laboratories Standard for Electrical Intermediate Metal Conduit – Steel, (UL 1242)

Save with the weight:IMC weighs about one third less than rigid metal conduits and has a larger interior diameter.

Save with the length: • 6M (IMC) 20 feet

• Fewer Fittings


• As per UL 1242 Standard and ANSI C80.6

INTERMEDIATE METAL CONDUIT - STEEL (WEIGHTS AND DIMENSIONS)

Moreover, interchangeable with galvanized rigid steel

conduit, they both have the same threads, use the

couplings and fittings and also are permitted to be

used in the same locations.

NOTES: (1) Figures are the average of the maximum and minimum dimensions as given in UL 1242 (2) Calculated from nominal outside diameter and nominal wall thickness.

FLEXIBLE CONDUIT

IMC

- FLE

XIB

LE C

ON

DU

IT

Galvanized steel flexible conduit is suitable for

concealed, exposed or approved raceways. The

flexible conduit is manufactured with a continuous

spiral wound strip of corrosion rust resistant, hot

dipped galvanized steel. The natural color type

Its Benefits: • Smooth interior for easy wire pulling

• Able to withstand high temperatures

• Durable crush-proof construction

• Corrosion and rust resistant

FLEXIBLE STEEL CONDUIT

RWS conduit features a smooth metal interior for

easy wiring pulling. The flexible steel conduit is wire

temperature rated, and has superior crush proof

qualities.

FITTINGS


FITTINGS

FIT

TIN

GS

- CO

LOR

CO

DIN

G

COLOR CODING

COLOR CONDUIT APPLICATIONS

Color conduits provide instant identification of power, datacom and emergency electrical systems.

The 7 colors enable a faster recognition of wires.

• Black, for colored area and architects.

• Red, for fire and alarm.

• Orange, for fiber optics.

• Yellow, for high voltage wiring.

• Green, for hospitals & health care areas.

• Blue, for low voltage wiring.

• Silver, for standard wiring.

6 METERS EMT

Save with the distance: • 6M (EMT) 20 foot

• Fewer Fittings


• Listed to UL 797 Standard and ANSI C80.6

Documents

International Tube & Conduit Company Ltd. - pmceng.co.kr · • Electrical conduits: EMT, IMC, RMC, BS31, BS4568 FC & Fittings. • Tubes and hollow sections: round, square and