11
SOGA TO: All U.S. and Export Agents FROM: William E. Toner INTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On Parts Bulletin 86-13 I discussed the new Intermediate Head Kit that we have developed as a service tool for you the agents. Unfortunately I forgot to mention that this kit is for the 60" boilers ONLY. We are working on developing this same kind of kit for the other models and are presently working on the 78" and will proceed with the 96" and 48" in the very near future. It appears that some of you are ali ttl e skepti ca 1 about tryi ng thi s new product. To hel p you make a deci si on to buy the fi rst one, I am pleased to announce that each agent 1 ocati on wi 11 be all owed to purchase one of these kits for a price of $100.00. This price should be very attractive to you and allow you the opportunity to buy at minimal risk. The kits are available for immediate delivery. Don't pass it up. Give us a call in Lebanon and place your order for this special kit. Again, the Part Number is 880-360 and the cost for the first one is $100.00. After that the cost per kit will be $200.00. It is for the 60" diameter boilers only. Give it a try, I think you will find it will be well worth your while. WET isml 6P Sincerely, 1. / / ..... ..-/ r/ .lfM;/{ fl/v- v- (,,& ! William E. Toner Manager, Parts Department P.O. BOX 421. MILWAUKEE. WISCONSIN 53201 PH: 414-962-0100. TELEX: 026-714. CABLE: CLEBRO

INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

SOGA

TO: All U.S. and Export Agents

FROM: William E. Toner

INTERNATIONAL PARTS BULLETIN

#86-16

DATE: November 17, 1986

SUBJECT: Sectional Intermediate Head Kits

On Parts Bulletin 86-13 I discussed the new Intermediate Head Kit that we have developed as a service tool for you the agents. Unfortunately I forgot to mention that this kit is for the 60" boilers ONLY.

We are working on developing this same kind of kit for the other models and are presently working on the 78" and will proceed with the 96" and 48" in the very near future.

It appears that some of you are ali ttl e skepti ca 1 about tryi ng thi s new product. To hel p you make a deci si on to buy the fi rst one, I am pleased to announce that each agent 1 ocati on wi 11 be all owed to purchase one of these kits for a price of $100.00. This price should be very attractive to you and allow you the opportunity to buy at minimal risk.

The kits are available for immediate delivery. Don't pass it up. Give us a call in Lebanon and place your order for this special kit. Again, the Part Number is 880-360 and the cost for the first one is $100.00. After that the cost per kit will be $200.00. It is for the 60" diameter boilers only.

Give it a try, I think you will find it will be well worth your while.

WET isml 6P

Sincerely,

1. / / ..... ..-/ r/ .lfM;/{ fl/v­

v- (,,& ! William E. Toner

Manager, Parts Department

P.O. BOX 421. MILWAUKEE. WISCONSIN 53201 • PH: 414-962-0100. TELEX: 026-714. CABLE: CLEBRO

Page 2: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

B06A

TO: All U.S. & Export Agents

FROM: William E. Toner

INTERNATIONAL PARTS BULLETIN

1186-13

DATE: October 1, 1986

SUBJECT: Sectional Inter­mediate Head Kit

At the Sal es I~eeti ng in Oconomowoc we announced a kit whi ch can be used to reinsulate the intermediate head without removing the head. This kit is now available for immediate delivery.

The kit consists of: - Four precast sections, - The necessary hardware for fastening the sections, - The required insulation to allow for expansion of the unit.

The secti ons are rei nforced with wi re mesh so that if they shoul d crack they wi 11 not fa 11 out of the head.

The part number for the kit is 880-360 and has a net cost of $200.00 per unit, with a list price of $345.00.

The kits are now available for immediate delivery. We will be shipping via truck only at thi s time. Due to the shape and potenti a 1 damage of these items, we are using a skid to protect the shipment.

With the heati ng season aproachi ng us, now is the time to revi ew your needs for this important and time saving kit.

Why not try this kit and find out just how much you can save in your organization. Give it a try - call Cleaver-Brooks Parts and order these kits.

WET Isml

P.O. BOX 421, MILWAUKEE, WISCONSIN 53201 • PH: 414·962·0100. TELEX: 026·714· CABLE: CLEBRO

Page 3: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

,,"C" " "TED NI til .&.TED SKETCH BOILER SIZE

RH LH RH LH

A P & M 15-40

465-103 465-646 .

132-194 132-851 CBH_2~

C P &~BH 50A 465·29P 465-1275 132-555 132-1346

B P & M 50-60

465-1324 465-1328 457-2862 132-1439 CBH 50-100

D CBH 100A 465-1325 457-2863

A CB 15-40 465-183 132-407

CB~-100 (OS) ~65-311 I· 45(-~oo, B CB 50-100 (NS) ,w-,.)a 465-1326 132-1'10~ .~ ~~~-

CB 1()OA-125A '<>0 '~M 465-1327 'o~ ,",oa,

~-~oo'" D CB t 'VV' .vvv 465~31. '10/-"000

E CB 125S-175S 465-1329 . 4-t.8}fl4 457-2867 4S?-7..')'B I·

B CB 250-350 465-138 465-635 457-373 457-727

F CB 400-800 465-167 ((.5-1260 457-481 457-2791

"An "B" "C"

"0" "E" "F"

DATE

c~~e INNER FRONT DOOR

DIVISION OF AQUA·CHEM. INC. P. O. sox 421 • MILWAUKEE, WIS. 53201

PARTS REFERENCE REVISION NO. SHEET

/.:z NO 1 OF

THIS INFORMATION IS CONFIDENTIAL AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE COMPANY'S INTERESTS.

REFERENce NO.

FT2.1.1

Page 4: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

427A

~t!!!~~~rOOks . MILWAUKEE, WISCONSIN

TO: All U.S. Service and Sales Representatives

FROM: Victor A. 8aumunk

SERVICE BULLETIN

DATE: October 30, 1986

SUBJECT: Rear Door Refractory

Effective 10/15/86 the lower half of all Firetube rear doors with the exception of Ohio Special two pass doors will be constructed using Cleaver­Cast refractory material.

This material is stronger, contains less water and includes fibers to release entrapped water.

This material requires a form to provide the shape and CAN NOT be hand formed and must be vibrated.

Our goal in using this material is to improve the overall quality of our rear door refractory in terms of longer life and the reduction of cracking due to steam generation within the material.

The Firetube Service Department requests comments from the field. We would appreciate your advice regarding condition of refractory at start-up and after the boiler is opened for annual inspection or any other reason.

PJ:~ Victor A. Baumunk Service Manager Firetube Products

Pr,nted Hl U.S,A

Page 5: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

c -" o. -x Z_ -.-Zz <, . ~ '. <. o:! "0 .Z ~-.­"0 Zo ·Z

" r_ o •• Oz

.:! X. "r o. OX .0 '­.­Zx ~O -. •• .0 ". : . • ~

"'D ;: ~ » r ..... ;U :E 0 (I)

-i n PJ In 7\0 ~ m Z (I)

;U ~: ..., rqiii~~ "II 0 rq Db t:d ;U ffi ~ ..., rq Z ~ 0 z i: ~ 0 o In ~

). {/.I • rq-

0

• • •

\)I !;;! • 0\ " < = [I) ;; ; 0 ct Z 0 Z

\D 0 0\

" I- '>:I E z ~

~ -> ..

~ ~ x

0 .. .. , -I l>l

N tIl 0 H -~ •

" ~2 " '" Z 0

'" " - Z .... 0

DIA. PART NO. REMARKS WGT

X 465-61 R.H. Hinge wlo Relief Door Opening 465,..130 R.H. Hinge with 7" Relief Door Opening 465-1255 R.H. Hinge with 12" Relief Door Opening 465-1256 L.H. Hinge wlo Relief Door Opening

36" 465-1257 L.H. Hinge with 7" Relief Door Opening 700# 465-1258 L.H. Hinge with 12" Relief Door Opening 465-135 Davited wlo Relief Door Opening 465-201 Davited with 7" Relief Door Opening 465-1259 Davited with 12" Relief Door Opening

X 465-623 R.H. Hinge wlo Relief Door Opening X 465-68 R.H. Hinge with 7" Relief Door Opening

465-182 R.H. Hinge with 12" Relief Door Opening 465-656 L.H. Hinge wlo Relief Door Opening 465-312 L.H. Hinge with 7" Relief Door Opening

48" 465-1254 L.H. Hinge with 12" Relief Door Opening 865# 465-632 Davited wlo Relief Door Opening 465-131 Davited with 7" Relief Door Opening 465-181 Davited with 12" Relief Door Opening 465-697 R.H. Hinge wlo Relief Door Opening

(Ohio Special 100S)

Page 6: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

c • N o~ -x z;

~i ~.

.~ -. <. o~ "0 ~z

i. N n Xo ~z -. r_

o ~. Oz ~~ X. Nr

;

"'0 > ;II -I (f)

;II JQ "II JQ ;II JQ Z 0 JQ

• N < ; 0 z z ~

n. ox '0 • • Zx ~o 1'-•

i , z , ~ ~o

" • N • ~

~

'f\) , 0

x 0

III III • ~

I\)

I-

• " "l •

0-3 ~ '" M Z • n

'" " ,.. Z ~

~ ~ j= ..... ~ Q (1) l> S PI c !! ..:l )\ 0 m Z '(1) JII 'l ~

~i~ 0'" t:= z :r ~ !!! ~ 0 ~ z 0 ~ p j:II;'" !> I'll.

0 -~ N

~!21 = (/) g ~ ~~ =

~ ~ ~~ te' 0

i

DIA • PART NO. REMARKS WGT

X 465-624 Davited wlo Relief ~or Opening 465-129

,

X Davited with 7" Relief Door Opening I

60" 465-153 Davited with 12" Relief Door Opening 1470# 465-899 Davlted wlo Relief Door·Opening

(Ohio Special 150s & 175s)

X 465-625 Davited wlo Relief Door Opening 78" X 465-140 Davited with 12" Relief Door Opening 3300#

X 465-1120 Davited wlo Relief Door Opening (400 to 600 HP)

465-1130 X Davited with 12" Relief Door Opening 96" (400 to 600 HP) 6500#

465-1269 Davited wlo Relief Door Opening (700 & 800 HP) .

465-1270 Davited with 12" Relief Door Opening (700 & 800 HP)

NOTE: The following are not supplied as part of the above but may be required: ---

7" Relief Door Assembly 428-17 12" Relief Door Assembly 428-37

96" Rear Heads Require the use of 632-1347 shipping frames •

X u Standardly Supplied - Normally Stocked

_. --

Page 7: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On
Page 8: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

z CJ -tJ) 0 W N ... Q I ..,.

0>

Q ..I 0

;

OATE

12/3/85

,.. CO CO')

I ..,. 0>

/

-tJ) w Q

3= w z

DRY OVEN TILE C~~Brooks® DlVlSION OF AGUA·CHEM, INC.

48" CB FIRETUBE BOILER P. O. SOX 421 • MILWAUKEE. WIS. 53201

REVISION NO. SHEET

PARTS REFERENCE o No.2 OF 4 THIS INFORMATION IS CONFIOENTIAL. ANO IS NOT TO BE

USEO IN ANY WAY OETRIMENT"!.. TO THE COMPANY'S INTERESTS.

REFERENCE NO.

FT2.3.1

Page 9: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

z CI Cii W Q

Q ...I o

z CI Cii W Q

:= w Z

OATE

DRY OVEN TILE 60" CB FIRETUBE .BOILER

CIeavefl~Brooks~ DIVISION OF AQUA.CHEM. INC.

12/3/85

P. O. SOX 421 • MILWAUKEE. WIS. 53201

REVISION NO. SHEET REFERENCE NO.

PARTS REFERENCE o NO 3 OF 4 FT2.3.1 ..

THIS INFORMATION IS CONFIDENTIAL. "'''10 IS NOT TO ae: USEO IN ANY WAY DETRIMENTAL. TO THE COMPANY'S INTERESTS,

Page 10: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

-tn W Q

Q ..J o

N It) ,...

I "'=t 0)

/ " I,

-, ~

'~'S • ! ':. "'.'

'." . ,

" . ';

DATE

co CO (f)

I "'=t 0)

FURNACE LINER TILE

-tn W Q

== w Z

CIeaver'l~Brooks® 12/3/85 48" P, M, & CBH FIRETUBE BOILER

DIVISION OF AGUA·CHEM, INC. P. O. SOX 421 • MILWAUKEE. WIS. 53201

REVISION NO. SHEET

PARTS REFERENCE o NO 4 OF 4

T~IS INFORMATION IS CONFIDENTIAL AND IS NOT TO BE USED IN ANY WAY DETRIMENTAl.. TO THE COMPANY'S INTERESTS.

REFERENCE NO.

FT2.3.1

I I

I

Page 11: INTERNATIONAL PARTS BULLETINtools.cbboilers.com/techguide/documents/FT2.pdfINTERNATIONAL PARTS BULLETIN #86-16 DATE: November 17, 1986 SUBJECT: Sectional Intermediate Head Kits On

: 13-2827 '*""'11111 '"' u.s ......

Horseoower Prior to 0~18850 After 0-18850 Sight Tube

CB 15-40 7· PCS 94-115 7 PCS 94-115 94-143

36" CBH 15-40 7 PCS 94-115 7 PCS 94-115 94-143

P & M 15-40 7 PCS 94-115 7 pcs 94-115 94-143

CB 50-l25A 10 pcs 94-116 9 pcs 94-172 94-165

48" CBH 50-125A 10 pes 94-116 9 pes 94-172 94-165

P & M 50-60 10 pcs 94-116 9 pes 94-172 94-165

~ CB 125-200 13 pcs 94-101 12 pcs 94-144 94-166

.z.a::. CB 2?0-350 15 pcs 94-162 15 pcs 94-162 94-167

~ CB 400-700 19 pes 94-189 19 pes 94-189 94-168

HI- TEMP. REFRACTORY CEMENT

u.s. 872-47 5011 Drum Canada 872-393 5011 Drum

If a rear head was reel aced on the 48" or 60" diameter shells, 50-200 h.e., after June of 1958, the rear head would contain the latter stvle baffle tile.

Cleaver ~ Brooks· OATil

REAR BAFFLE BRICK QIVIBION O~ AQUA.-QI-4EM. INC. CB, CBR, p. & M UNITS

MILwAuKee. WISCONSIN. U.S.A. REVISICN NO. I SHEET PARTS REFERENCE

NC. 1 c. THIS IN~C"M"TICN IS CON,10£NT''''1. ANO IS NOT TC Ill[

USEe IN ",NY WAY OET"IMENT ...... TO THE eCM,. ... NY·S INTE"IlSTS.

1 I REFERENCE NC.

FT 2.4.1