Department of Automobile Engineering International Journals: Paper Published in the year 2013: 1. Srikanth , J Venkatesh , 9 Sep 2013, “Fish oil biodiesel as an additive in diesel-ethanol

blends for a four stroke single cylinder diesel engine’’. International journal of engineering research and technology, issn 2278-0181, vol 2, issue.

2. K.B.Sidde Gowda, J. Venkatesh , October-2013. “Effect of ethanol-gasoline blends on MPFI engine performance, emission and lubricating oil properties” , International journal of innovative research in science, engineering and technology, volume 2,issue 10, pp 5314.

3. K. B. Sidde Gowda, J. Venkatesh (2013), “Performance and emission characteristics of MPFI engine by using gasoline ethanol blends”, International Journal of Innovative Research in Science, Engineering and Technology, vol 2, issue 9, pp 4891-97.

4. K.Krishnamurthy and Dr.J.Venkatesh, 1 January 2013. “Assessment of surface roughness and material removal rate on machining of TiBz reinforced aluminium 6063 composites. A Taguchi’s approach”, International journal of scientific and research publications.Volume 3 Issue, ISSN2250-3153.

5. K.Krishnamurithy , J. Venkatesh and B.Suresna, (2013). “Study on Material Removal Rate and Surface Roughness in Machining of TiB2 Reinforced Aluminum 6063 Composites: Ataguchi’s Approach “, International Journal of Advanced Materials Science ISSN 2231-1211 Volume 4, Number 1, pp.43-59.

6. K.Krishnamurithy ,J. Venkatesh, 4 April 2013. “Study-on Machining Parameters of TiB2 Reinforced Aluminum 6063 Compossites ’’has been reviewed and for publication in IJSRP Volume 3 Issue

7. K.B.Sidde Gowda, J. Venkatesh ,“assessment of Mineral and synthetic base lubricating oils degradation in gasohol fueled MPFI engine”, International journal of science and technology(under review

Paper Published in the year 2008 8. Jagadeesha K.M., Nagaraju T., 2008. “Modified Average Reynolds Equation to Conclude

3D Surface Roughness and Fluid Inertia Effects in Bearing Lubrication” proceedings of 63rd STLE Annual Meeting held at Cleveland, Ohio, USA.

9. Jagadeesha K.M., Nagaraju T., Sharma S.C. and Jain S. C., 2008. “Transient Non-Newtonian-Thermohydrodynamic Analysis of a Dynamically Loaded Journal Bearing with 3D Surface Roughness Effects,” proceedings of 63rd STLE Annual Meeting held at Cleveland, Ohio, USA.

Department of Civil Engineering International journals Paper Published in the year 2015 1. Gopi Siddappa, April 2015. Finite Element Analysis of Jacketed Reinforced concrete

column subjected to axial and uniaxial load, IJRET – Inernational Journal of research in Engineering and Technology, Vol 4, Issue 4.

2. S. Naveen kumar, Veena .V and Guruprasd “Dynamic Response Of Tall Irregular Buildings Under Influence Of Torsion, IJSRD.,VOL 3, ISSUE 6-AUG 2015.

3. Dr. K.manjunath,S. Naveen kumar and J.manjunath “A Study On Probability Failure Of Column In Rc Frame page no 1-5IRJET.,VOL 2 , ISSUE 3 –JUNE 2015, 2395-0056.

4. Dr. K.manjunath,S. Naveen kumar and J.manjunath “A Study On Probability Failure Of Column In Rc Frame” ,IRJET.,VOL 2 , ISSUE 4 –JUNE 2015, 2395-0056.

5. Krishina M.K. and mahalingegowda R.M. “An Experimental study on vehicular emission dispersion through double storied building model configurations” International journal of advanced research in civil structural Enviornmental and infrastructure engineering and developing volume 2 issue. 3.01- Mar 2015-ISSN+ No: 2320 723X.

6. Dr.H.S. Suresh Chandra, Vijay Kumar, Finite Element Analysis of Jacketed Reinforced Concrete Column subjected to Axial and Uniaxial Load”, Volume 4, Issue 4; April 2015, International Journal of Research in Engineering and Technology(IJRET,).

7. Bharath D., Jayashankarbabu, B.S., “Reliability Analysis of Static Response of Structures with Irregularities”, International Research Journal of Engineering Technology”, 2015, Vol. 2, Issue 1, pp.01-05. Paper Published in the year 2014

8. Latha.S, ShivaShankara G. P & Thanushree M.S “Suitability of Groundwater Quality for Irrigation” International Journal of Emerging Trends in Science and Technology , Volume 01, Issue 05,pp 753-757, (2014).

9. Manasa. J and ShivaShankara G. P “Relationship Between Precipitation And Groundwater Quality of Mandya Urban City” International Journal of Emerging Technology & Advanced Engineering , Volume 4, Issue 6, June, (2014).

10. Srivathsa H.U., Jayashankarbabu, B.S., “Free Vibration Analysis of Stiffened Plate by Finite Element Approach”, International Journal of Engineering Research and Applications, 2014, Vol. 4, No.8(2), pp.01-08.

11. Dilip S., Jayashankarbabu, B.S., “Feasibility Analysis of the use of Textile Sludge for the Production of Self Compacting Concrete”, International Journal of Engineering Research and Applications, 2014, Vol. 4, No.8(2), pp.01-08.

12. Dilip S., Jayashankarbabu, B.S., “A Comprehensive Investigation on Self- Compacting Concrete using Textile Sludge as Filler”, International Journal of Engineering Research and Applications, 2014, Vol. 4, No.8(2), pp.01-08.

13. Shruthi, Jayashankarbabu, B.S., “Seismic Vulnerability of existing RC Building using Pushover Analysis”, International Journal of Engineering Research and Technology, 2014, Vol. 3, Issue 12. Pp. 1038-1047.

14. Shruthi H.G., Jayashankarbabu, B.S., “Analysis of Isotropic Perforated Stiffened Plate using FEM”, International Journal of Engineering Research and Applications, 2014, Vol. 4, No.8 (2), pp.01-08.

15. Anupama B. M., Jayashankarbabu, B.S., “Analysis of stiffened plate using FE Approach”, International Journal of Modern Engineering Research, 2014, Vol. 4, No.7, pp.7-12.

16. Jayashankarbabu, B.S., Dr. Karisiddappa., “Stability of Simply Supported Square Plate with Concentric cutout”, International Journal of Modern Engineering Research, 2014, Vol.4, No 2, pp.15-22.

17. Jayashankarbabu, B.S., and Karisiddappa., “Stability of Square Plate with Concentric cutout”, International Journal of Civil, Architectural Science and Engineering, 2014, Vol.8, No 3, pp.333-341.

18. Jayashankarbabu, B.S., and Karisiddappa., “Stability of Square Plate with Concentric cutout”, International Conference on Structural Engineering, Construction and Management , Dubai, UAE, 12-13 March 2014.

19. Dr.H.S. Suresh Chandra Manjunath.B., “Investigating the Workability and Strength of Concrete mixes with Variation of Flaky aggregates”, PP285-293, Volume2 Issue1 January-June -2014.. ISSN2349 -9575,Journal of Civil Engineering and Research.

20. H.S.Suresh Chandra,Sarangapani.G.,“ Waste Plastics Concrete Blocks”, Volume-2 Issue1 January-June -2014. ISSN2349 -9575, Journal of Civil Engineering and Research.

21. H.S.Suresh Chandra, Sarangapani.G., Naresh Kumar B.G.“ Experimental investigation on the effect of replacement of Sand by Quarry dust in Hollow Concrete blocks for different mix proportions” Vol.5, No1,Febraury 2014.pp15-19

22. Gopi Siddappa, May 2014, Comparisons of bracings and shear walls as seismic strengthening methods to buildings with plan irreuarities, , IJRET – Inernational Journal of research in Engineering and Technology, Vol 3, Issue 6.

23. A.R. Vinod and R.M. Mahalingegowda “ A study on suitability of selected fibrous packing media for sewage treatment journal of international Academic research for multidisciplinary, volume 2,issue 2, march2014 (online ) pp 487-496. Paper Published in the year 2013

24. G.R. Shivakumarswamy, R.M. Mahalingegowda& A.R. Vinod “ Domestic wastewater treatment in reactors filled with areca husk fiber and pebble bed” Elixir online international journal ( Elixir Pollution) 57 (2013)14064-14066).

25. A.R. Vinod and R.M. Mahalingegowda“ Performance evaluation studies of two continuous flow fixed Bed filters for wastewater treatment” Internationljouornal of chem. Tech research (online) Vol.05., No 3., pp 113-118, April –june 2013.

26. H.S.Suresh Chandra, Sarangapani.G.,Naresh Kumar B.G.“Structural Characteristics of Boulder Blocks”February, 2013, Vol-4,Issue-2, International Journal of Scientific and Engineering Research IJSER.

27. Prakash T.M. B.G. NareshKumar Karisiddappa, “Strength and Elastic Properties of aerated concrete block masonry” International journal of Structural and Civil Engineering Research, ISSN 23 19- 6009, Vol 1.2., Issue 01, February 2013.

28. Prakash T.M. , B.G. Naresh Kumar ,Karisiddappa, RaghunathaS, “Properties of Aereated ( Foamed) Concrete Blocks”, International Journal of Scientific & Engineering Research, ISSN 229-5518, Vol 04, Issue 01, January 2013.

29. Jayashankarbabu, B.S., and Karisiddappa. “Stability Analysis of Thick Plate with Eccentric Cutout”, International journal of Emerging Technology and Advanced Engineering, 2013, Vol.3, No 8, pp.505-513.

30. Suresh Tiwari, Deewan Singh Bisht, A K Srivastava, G. P. Shivashankara, and R.Kumar “Interannual and intraseasonal variability in fine mode particles over Delhi: Influence of meteorology”Advances in MetrologyVolume 2013 Article ID 740453-9 pages

31. Sharmila GV and Shivashankara GP “Comparative Assessment of Precipitation and Ground water Quality-Karnataka,India” Journal of Engineering and Technology (RRJET) V.2,issue 3,pp 217-281 (2013). Paper Published in the year 2012

32. A.R. Viond and R.M. Mahalingegowda“ Studies on natural fibrous materials as submerged aerated deds for wastewater treatment” Elixir online international journal ( Elixir pollution 51(2012) 1079- 10762).

33. Vinod A.R. and Mahalinge Gowda R.M. “Applicability studies of reactor filled with coffee husk blended with wooden chips” Nature Environment and pollution Technology, An international quarterly Scientific journal. 2012 (9) Accepted)

34. Vinod A.R and mahalingeGowd R.M. “Treatment of waste water using different fixed beds reactors A pilot plant study” Nature Environment and pollution Technology, An International quarterly scientific journal, pp 63-166, vol. 11 No 1 (2012)

35. H.J. Puttabasavegowda, Karisiddappa& K.C. Krishna “Liner Interactive and Non- liner Interactive Analyses of plan frame combined footing soil systems- parametric study” international journal of Earth Science & Engineering (PP341-346, volume- 5 April 2012 )

36. Shivashankara G.P and UmmeHamida “Assessment Of Groundwater Pollution Using Drastic Model” International Journal of Advance in Engineering Research (IJAER) Vol.No. 3, Issue No.V, May (2012).

37. Sharmila G.V and Shivashankara G.P.“pH and Chemical Composition of Bulk Precipitation - Karnataka, India” inJournals of IACSIT 2012, volume 42, pp.no. 121-124 (2012).

38. Shivashankara G.P andUmmeHamida “Assessment Of Groundwater Pollution Using Drastic Model” International Journal of Advance in Engineering Research (IJAER) Vol.No. 3,Issue No.V, May (2012) Paper Published in the year 2011

39. “ Evaluation of Bacteriological parameters in water using Artificial Neural Network” International Journal on Nature, Environment & Pollution Technology, Vol.10,No.1, pp 159 - 166,(2011).

40. S.B.Boregowda “ In situ characterization of unsaturated soil Hydraulic properties of a laterite soil profile in coastal Karnataka” ISH Journal of Hydraulic Engineering VOL. 12, 2006 No 1, (87-98) Evaluation of reference Evapo transpiration methods at a sub-humid location in Karnataka state India, International journal of Earth sciences & engineering Vol 04, No, 07 spl issues, PP 333-339, Nov 2011

41. Dr. L.Prasanna Kumar “ Evaluation of Bacteriological parameters in water using Artificial Neural Network” International Journal on Nature, Environment & Pollution Technology, Vol.10,No.1, pp 159 - 166,(2011). Paper Published in the year 2010

42. Dr. L.Prasanna Kumar “Predication of water Quality Dependent Parameters using Artificial Neural Network. International Journal, pollution Research”, 29(3): 461 – 469 (2010).

43. K. Prasad; C. Ojha; Gopi Siddappa; I. Hussain, 2010. A variably saturated numerical model for seepage and stability analyses of an embankment dam with a central core, International Journal of Geotechnical Engineering Volume 4, Issue 1, pp. 139-150

44. Jayashankarbabu, B.S., Karisiddappa., Veena, H., “Vibration and Stability Behavior of Square Plate with Rectangular Cutout”, Proceedings of International Conference on Advances in Materials and Techniques in Civil Engineering, Coimbatore, India, 07-09 January 2010, pp.79-85.

45. Jayashankarbabu, B.S., Karisiddappa., Tabassumaara., “On the Stability of Square Plate with Cutout”, Proceedings of the International Conference on Advances in Materials and Techniques in Civil Engineering, Coimbatore, India, 07-09 January 2010, pp.159-165.

46. Shivashankara G.P and SiddeGowda“Determinants of rural to urban migration and Environmental problems. OIDA International Journal of Sustainable Development 01:07 pp 99-106 (2010)

47. Shivashankara G.P and SiddeGowda (2010) “Determinants of rural to urban migration and Environmental problems. OIDA International Journal of Sustainable Development 01:07 pp 99-106.

Paper Published in the year 2009 48. Krishna M.K. and Mahalinge Gowda R.M., A comparison of results from field and wind

tunnel modelling of dispersion in arrays of obstacles” International Journal of Environmental research & Development 03 (4) 222-231 (2009)

49. SiddeGowda&Shivashankara G.P “Urbanization, Slums & Indoor Air Pollution in Developing Countries. International Journal of Environmental, Cultural, Economic & Social sustainability Vol.4 issue6, pp 33-40 (2009) Paper Published in the year 2008

50. Nagendra Prasad B.C., Munavar Pasha &Shivashankara G.P. “Chemical composition of Bulk Precipitation during 2005, Southwest Monsoon in Bangalore City, India”, Pollution Research, 27(1); 83 -86, (2008)

51. NagendraPrasad.B.C&Shivashankara G.P. “Precipitation chemistry at an Urban Area of Karnataka, India”, Pollution research 27(4), 747-750 (2008)

52. SiddeGowda&Shivashankara.G.P. (2008) “Environmental Impact Assessment of urban slums in Bangalore Agglomeration “ITPI Journal, 5:2 33-40.

53. NagendraPrasad.B.C&Shivashankara G.P. (2008). “Precipitation chemistry at an Urban Area of Karnataka, India”, Pollution research 27(4), 747-750.

54. Nagendra Prasad B.C., Munavar Pasha & Shivashankara G.P. (2008). “Chemical composition of Bulk Precipitation during 2005, Southwest Monsoon in Bangalore City, India”, Pollution Research, 27(1); 83 -86.

Department of Computer Science and Engineering International journals: Paper Published in the year 2015 1. S.K.Uma.2015.HOG and CS-LBP method for human Detection with Occlusion,

International Journal of Computer Science and information Technology Research. ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2, pp: (692-698).

2. S.K. Uma.2015.Rasberry PI Home Automation with wireless sensors using Smart Phone in International Journal of Computer Science and Mobile Computing ISSN 2320-088X Vol. 4, Issue 5, pp: (797-803).

3. S.K.Uma.2015.Feature Extraction for human detection journal of computer application using HOG and CS-LBP method. ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2, pp: (897-904), April – June.

4. S.K.Uma.2015.Application of Wavelet Transform to Multimodality Medical Image (PET & MRI) Fusion in International Journal of Computer Science and information Technology Research ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2,pp:(699-705)

5. Nagarathna.2015.Naïve Bayesian Classifier for Product Demand Forecasting in International Journal of Computer Science and Information Technology Research ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2, pp: (872-878).

6. Nagarathna.2015.Product Label Reading System For Visually Challenged People ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2, pp: (897-904).

7. Nagarathna.2015.RFID Based Supermarket Queue Prevention and Automation System for Physically Challenged People ISSN 2348-1196 (print) ISSN 2348-120X (online) Vol. 3, Issue 2, pp: (835-840), April - June 2015

8. M.L.Anitha.2015.Extraction of Region of Interest (ROI) for Palm Print and Inner Knuckle Print International Journal of Computer Applications (0975 – 8887) Volume 124 – Number.14, pp21-26.

9. M.L.Anitha.2015.A Novel Binning and Indexing Approcah Using Hand Geometry And Palm Print To Enhance Performance Of Biometric Identification International Journal of Computational Science and Applications(IJCSA),Volume 5 - Number 5, pp13-25, Oct.

10. Umesh D R.2015.Predicting Breast Cancer Recurrence Using Machine Learning Techniques International Journal of Latest Trends in Engineering and Technology Vol. 5 Issue 1 ISSN: 2278-621X.

11. Umesh D R.2015.Predicting Breast Cancer Survivability Using Naïve Baysien and C5.0 Algorithm International Journal of Computer Science and Information Technology Research Vol. 3, Issue 2, pp: (802-807), ISSN 2348-120X.

12. Chethana.C.2015.The classification and recognition of plasmodium parasite in production of malariya infected blood smears using artificial intelligence technique Volume 5 issue 7 publishers, IJARCSSE.

Paper Published in the year 2014 13. S.K.Uma.2014.”Moving Object Detection using Background Subtraction and Shadow

Removal from video in International Journal of Advanced Technology” ISSN 238-7550 Vol. 2, Issue 7, pp: (450-461)

14. M C Padma and Apoorva Prakash M V.2014.”Battery-Bandwidth Based Handover Framework for 3G/WLAN Using Android Handheld Devices”, International Journal of Engineering Research and Applications, Online ISSN: 2248-9622, Vol. 4, Issue 6 (Version 5), pp.33-38.

15. M C Padma and Nayana H S.2014.”Messaging and Voice Conferencing through Wi-Fi Network, International Journal of Engineering Research and Applications”, Online ISSN: 2248-9622, Vol. 4, Issue 6 (Version 6), pp.01-05.

16. M.C.Padma and Saleem Pasha, 2014.”Quadtree Based Feature Extraction Technique for Recognizing Handwritten Kannada Characters”, V. Sridhar et al. (eds.), Emerging Research in Electronics, Computer Science and Technology, Lecture Notes in Electrical Engineering 248, DOI: 10.1007/978-81-322-1157-0_74,© Springer, India, pp. 725–735.

17. M C Padma and Mayola Reena Fernandes.2014.”Remote Control of Home Appliances, International Journal of Engineering Research and Applications”, Online ISSN : 2248-9622, Vol. 4, Issue 6( Version 5), pp.28-32.

18. Apoorva Prakash M V.2014.”Battery bandwidth based handover (bbh) framework for 3g/wlan using android handheld devices”. ISSN : 2248-9622, Vol. 4, Issue 6( Version 5), pp.33-38 Paper Published in the year 2013

19. M.C.Padma and Yashaswini J.2013.”Hiding data in encrypted image with LSB substitution”, International Journal of Science and Research (IJSR), India, Online ISSN: 2319-7064, Volume 2, Issue 6, Page No: 125-128.

20. M.C.Padma and Abdul Jabbar k.2013.”Secure Virtualization in Cloud Computing using Eucalyptus”, International Journal of Science and Research (IJSR), India, Online ISSN: 2319-7064, Volume 2, Issue 6, Page No: 129-132. Published in the year 2012

21. M.C.Padma and R.J. Prathibha.2012.Development of Morphological Stemmer, Analyzer and Generator for Kannada Nouns, International Conference on “Emerging Research in Electronics, Computer Science and Technology (ICERECT-12)” held at P.E.S. College

of Engineering, Mandya , Karnataka, India, Series ISSN 1876-1100 , Series Title Lecture Notes in Electrical Engineering, page no. 713-723, Published by Springer India. Paper Published in the year 2010

22. M.C.Padma and P.A.Vijaya.2010.”Global Approach for Script Identification using Wavelet Packet Based Feature”s, International Journal of Signal and Image Processing and Pattern Recognition (IJSIP), Publisher: Science and Engineering Support Society (SERSC), ISSN: 2005-4254, Vol.3, No. 3, pp. 29-40.

23. M.C.Padma and P.A.Vijaya.2010.”Identification of Kannada, Hindi and English Text Lines Using Profile Features”, International Journal of Computer Science and Applications (IJCSA), ISSN: 0972-9038, © Technomathematics Research Foundation, Vol. 7, No. 4, pp. 16 – 33.

24. M.C.Padma and P.A.Vijaya.2010.”Word Level Identification of Kannada, Hindi and English Scripts from a Trilingual Document”, International Journal of Computational Vision and Robotics, ISSN (Online): 1752-914X, ISSN (Print): 1752-9131, Vol.1, No. 2, pp. 218 – 235.

25. M.C.Padma and P.A.Vijaya.2010.“Wavelet Packet Based Texture Features for Automatic Script Identification”, International Journal of Image Processing (IJIP), ISSN (Online): 1985 – 2304, CSC Press, Computer Science Journals, Volume 4, Issue 1, pp. 53 - 65, March.

26. M.C.Padma and P.A.Vijaya.2010.”Script Identification of Text Words from a TriLingual Document”, International Journal of Image Processing (IJIP), ISSN (Online): 1985 – 2304, CSC Press, Computer Science Journals, Volume 4, Issue 1, pp. 35-52, March.

27. M.C.Padma and P.A.Vijaya.2010. “Entropy Based Texture Features Useful for Automatic Script Identification”, International Journal of Computer Science and Engineering (IJCSE), Engineering Journal Publishers, Vol. 02, No.02, pp.115-120.

28. R.Girisha.2010.”Self Shadow Elimination Algorithm using Inferential Difference in Mean Method for Surveillance Application” ,Published in International Journal of Computer Applications. http://www.ijcaonline.org/archives/number27/507-824.

29. R.Girisha.2010.”Adaptive Object Segmentation for Surveillance Videos, International Journal of Computer Applications” (in a special issue entitled RECENT TRENDS IN IMAGE PROCESSING AND PATTERN RECOGNITION). Paper Published in the year 2009

30. M.C.Padma and P.A.Vijaya.2009. “A Fuzzy Rule Based Model for Automatic Script Identification from a Trilingual Document”, International Journal of Computing and Applications (IJCA), ISSN: 0973-5704, Serial Publications, Vol. 4, No.2, pp. 151-162, Dec

31. M.C.Padma and P.A.Vijaya.2009. “Identification of Telugu, Devanagari and English Scripts Using Discriminating Features”, International Journal of Computer Science and Information Technology (IJCSIT), ISSN: 0975-3826 (online), 0975-4660 (Print), Volume 1, Number 2, pp.64-78.

32. R.Girisha.2009.”Motion Segmentation from Surveillance Videos using Varied Number of Frames, International Journal of Recent Trends in Engineering”, Vol. 2, No. 1, Nov. Pages 60-65. Paper Published in the year 2008

33. M.C.Padma and P.A.Vijaya.2008.”Language Identification of Kannada, Hindi and English Text Words through Visual Discriminating Feature”s, International Journal of Computational Intelligence Systems (IJCIS), ISSN (print): 1875-6891/ ISSN (on-line): 1875-6883, Volume 1, Issue 2, pp. 116-126

Department of Electronics and Communication Engineering International Journal : Paper Published in the year 2015 1. M L Anitha and K A RadhaKrishna Rao, 2015 "Extraction of Region of Interest (ROI)

for Palm Print and Inner Knuckle Print",International Journal of Computer Applications (0975 – 8887) Volume 124 – Number.14, pp21-26.

2. M L Anitha and K A RadhaKrishna Rao, 2015 " A Novel Binning and Indexing Approcah Using Hand Geometry And Palm Print To Enhance Performance Of Biometric Identification System ", Accepted for publication in International Journal of Computational Scienceand Applications(IJCSA),, Volume 5 - Number 5,pp13-25.

3. Darshan Iyer N, Dr. K A Radhakrishna Rao, 2015 “IoT Based Electricity Energy Meter Reading, Theft Detection and Disconnection using PLC modem and Power optimization” Vol. 4, Issue 7, ISSN (Print) : 2320 – 3765ISSN (Online): 2278 – 8875

4. Mahesh Gowda N M, Dr. S.S. Parthasarathy, 2015 “ Two Phase Bidirectional DC-DC Switching Converter With Coupled Inductor” International Journal of Electrical and Electronics Research ISSN 2348-6988 (online) Vol. 3, Issue 2, pp: (468-475)

Paper Published in the year 2014 5. Dr. K.N Muralidhara, Manju Devi, Arunkumar P Chavan, 2014 “A Novel Design of 9-

bit Pipeline ADC”, ISSN: 2229-5518 Volume-5, issue-10, Page no.358-362. 6. Dr. K.N Muralidhara, Manju Devi, Arunkumar P Chavan, 2014” A 9-bit, 200MS/s low

power CMOS Pipeline ADC” , ISSN:2249-8958,Volume-3 Issue-6, page no.180-183 7. Dr. K.N Muralidhara, Manju Devi, Arunkumar P Chavan, 2014 “A 1.5-V, 3-bit, 500-

MS/s Low power CMOS Flash ADC”, ISSN: 2319-7242, Volume-3, Issue-3, Page no. 4044-4048.

8. Dr. K.N Muralidhara, Manju Devi, Arunkumar P Chavan, 2014” A 1.5-V, 10-bit, 200MS/s CMOS Pipeline Analog to Digital Converter”, ISSN: 09075-8887, volume88-no.7,Page no. 35-38. 9. H.G. Rangaraju, Dr. K.N. Muralidhara, Arpitha H S, 2014” Design of Efficient Reversible Multiply Accumulate (MCA) Unit”, Volume 85 – No 16, 0975 – 8887.

9. Pushpa D ,Dr H S Sheshadri, 2014 “Computationally Efficient Algorithm for Detecting Moving Object with Moving Background”, Vol 2, Issue 11, ISSN 2321-8169

10. Bindu N. S, H. S. Sheshadri, 2014 “An Evaluation of Uniform Region and Depth Discontinuity Region Error In Stereo Algorithms”, Vol. 3 Issue 3, ISSN: 2278-0181

11. Pushpa D , Dr H S Sheshadri, 2014 “Semantic Analysis of Precise Detection Rate in Multi- Object Mobility on Natural Scene Using Kalman Filter”, Springer PP 217-226

12. Chandrika Sudhendra, Madhu AR, ACR Pillai, Gayathri Shekar, TS Rukmini, KARK Rao, 2014 “Design and Implementation of A Novel Rasorber for Aircraft Stealth Applications”, 978-1-4799- 6013-2/14/$31.00 © IEEE.

13. V. Sridhar, Shylashree, 2014 “An optimized multiplier architecture for a dual field processor for ECC”, International Journal of Computer Science and Information security (IJCSIS), Vol.12, No.02, pp.18-24, USA. ISSN 1947-5500

14. S.Gayathri and V.Sridhar, 2014 “FPGA Implementation of Orientation Field Estimation Of Fingerprint Recognition Process “, International Journal in Recent trends in Engineering and Technology (IJRTET) Vol. 11, No. 1, DOI: 01.IJRTET.11.1.1546, pp 132-143.

15. S.Gayathri and V.Sridhar, 2014 “Image Enhancement Technique for Fingerprint Recognition Process”, ITSI Transactions on Electrical and Electronics Engineering (ITSI-TEEE), ISSN (Print): 2320-8945, Vol.2, Issue 1, pp 45-50

16. Gayathri and V.Sridhar, 2014 “FPGA Implementation Of Fusion Technique For Fingerprint Application”, International Journal Of Electronics And Communication Engineering & Technology (IJECET), ISSN 0976 – 6464(Print), ISSN 0976 – 6472(Online), Vol. 5, Issue 8, pp. 171-177

17. S.Gayathri and Dr V.Sridhar, 2014 “Implementation of Minutiae extraction and false minutiae elimination on FPGA” –- Emerging Research in Electronics, Computer Science and Technology, Lecture Notes in Electrical Engineering 248, DOI: 10.1007/978-81-322-11570_2, Springer India

18. V. Sridhar, Shylashree, 2014 “Hardware realization of fast multi-scalar elliptic curve point multiplication by reducing the Hamming weights over GF(p)”,International Journal of Computer Network and Information security(IJCNIS), Vol.6, No.10, pp.57-63, Hong Kong. ISSN 2074-9104

19. V. Sridhar, Shylashree, 2014 “Hardware realization of high-speed elliptic curve point multiplication using pre-computation over GF(p)”, Journal of Computer Science (JCS), Vol.10, No.07, pp.1094-1106, USA and Australia. ISSN 1549-3636

20. N.M. Mahesh Gowda, 2014 “Study of VMC, CMC and SM Control of Buck Converter ” Advanced Research in Computer Science and Electronics Engineering (IJARCSEE) 2277 – 9043.

21. N.M. Mahesh Gowda, 2014 “Modelling of Buck DC-DC Converter Using Simulink” -Innovative Research in Science,Engineering and Technology (IJIRSET), 2319-8753

22. M.J.Anand, 2014 “ Adaptive wavelet Packet Decomposition for Efficient Image Denoising By using neighsure shrink method” IJCSIT-Journal

23. M.J.Anand, 2014 “ Interpolation based image super resolution by support Vector Regression” IJCSIT-Journal

24. Madhusudan N, Kavya. P, 2014 ” Novel Compact Rectangular Monopole using Defected Ground Structure Technique” IJECT Vol. 5, Issue 2, ISSN : 2230-7109 (Online) | ISSN : 2230-9543 (Print)

Paper Published in the year 2013

25. Dr. K. N Muralidhara, H V Ravish Aradhya, Lakshmesha J, 2013” Reduced Complexity Hybrid Ripple Carry Look Ahead Adder”, ISSN- 0975-8887, Vol. 70, Issue. 28, pp.13-16.

26. A B Rajendra ,Dr H S Sheshadri, 2013 “A new approach to analyze visual secret sharing schemes for biometric authentication ”, Vol. 3, No. 6, pp 53-60

27. Pushpa D ,Dr H S Sheshadri, 2013 “Homography based Multiple Moving Objects UsingMulti-Dimensional Event Feeds”, ISSN: 2249-9555Vol. 3, No.5.

28. Pushpa D , Dr H S Sheshadri, 2013 “Schematic model for analyzing mobility and Detection of multiple object on traffic scene”, ISSN 0976 – 6367(Print)ISSN 0976 – 6375(Online) Volume 4,Issue 3, pp. 32-49

29. S Narasimha Murthy, Arun Kumar M N ,Dr. H S Sheshadri, 2013 “Abnormality Detection in Digital Mammogram’, Vol. 4 (6) , 830-834 ISSN 0975-9646

30. S Narasimha Murthy, Arun Kumar M N, Dr. H S Sheshadri, 2013 “Mass Detection and Classification using Machine Learning Techniques in Digital Mammograms”, Volume 76,Issue 1

31. Chandrika Sudhendra, N. Avikumar, A.C.RPillai, K.A.R.K. Rao & Madhavkumar, 2013 ” EMBEDDED PASSIVES BASED WIDE BAND RADAR ABSORBER”, International Journal of Advances in Engineering & Technology, ISSN: 22311963

32. V. Sridhar, Shylashree, 2013 “A High-speed optimized multiplier architecture for a DF-ECC processor”, International Journal of Simulation, Systems, Science and Technology (IJSSST), Vol.14, No.02, pp. 37-43, UK. ISSN 1473-804X

33. Dr. V Sridhar, Anil Kumar M N, 2013 “Analyzing the effectiveness of a new technique to speed up scalar point multiplication over GF(p) by random numbers and statistics” Elixir elec. Engineering 15913-15918

34. S.Gayathri and Dr V.Sridhar, 2013 “An improved Fast Thinning Algorithm for fingerprint image”- International Journal of Engineering Science and Innovative Technology, ISSN: 2319-5967, Volume 2, Issue 1, pp 264-270

35. Dr. V Sridhar, Anil Kumar M N, 2013 “An Area Efficient Arithmetic Unit Of Ellitpic Curve Cryptography Processor” International Journal of Research in Engineering and Applied Science ISSN: 2249-3905, Volume 3, Issue 5.

36. Dr. V Sridhar, Anil Kumar M N, 2013 “A new technique to accelerate point multiplication specifically for a National Institute of Standards and Technology (NIST) recommended prime field p521” International Journal of Computer Science and Information Security, Vol. 11, No. 4.

37. K. R. Sudhindra , V. Sridhar, 2013 “Cost Effective Solution to support Capacity and Coverage of live GSM Network” International Journal of Advanced Research in Computer and Communication Engineering, Vol.2, Issue 6.

38. S.Gayathri and Dr V.Sridhar, 2013 “Design and simulation of Gabor filter using verilog HDL”-International Journal of Latest Trends in Engineering and Technology, ISSN: 2278- 621XVolume 2, Issue 2 pp 77-83.

39. Mahesh Gowda N M, Dr. S. S. Parthasarathy, 2013 “Reviewing Potentials Aspects Of DC-DC Controllers: A Study”, International Journal of Engineering Research & Technology (IJERT) Vol. 2 Issue 7 ISSN: 2278-0181

40. Nischitha.K, Mahendra Rajan.V , Ramesha K, 2013 “An hybrid approach for image Restoration”, International Journal of Innovative Research in Science, Engineering and Technology (ISO 3297: 2007 Certified Organization) Vol. 2, Issue 8.

Paper Published in the year 2012

41. H.G. Rangaraju, Dr. K.N. Muralidhara, Vinayak hedge, Raja K B, 2012” Design of optimization of n-bit Reversible binary Comparator”, Vol.54, No.10,pp 22-30.

42. Dr. K.N Muralidhara, Manju Devi, Prasanna R Hegde , 2012 “Removal of Impulse Noise Using Eodt with Pipeline ADC” , vol.2 issue no.4 and page no.991-996.

43. H.G. Rangaraju, Dr. K.N. Muralidhara, Aakash Babu, Suresh, 2012” Design and Optimization od reversible Multiplier Circuit”, Vol.52, No.10, pp 44-5.

44. Dr. K. N Muralidhara, H V Ravish Aradhya, 2012 “Design, Optimization and Synthesis of Efficient Reversible Logic Binary Decoder”, ISSN- 0975-8887.

45. Dr. K. N Muralidhara, H V Ravish Aradhya, 2012 “Simulation and Synthesis of Combinational Shifter using Reversible Gates”, Volume 40, Issue 16, ISSN 0975-8887.

46. Dr. K. N Muralidhara, H V Ravish Aradhya, 2012” Design Optimization of Reversible Logic Universal Barrel Shifter for Low Power Applications”, Volume 40, Issue 15, ISSN 0975 8887.

47. Pushpa D ,Dr H S Sheshadri, 2012 “Precise multiple object identification and tracking usingefficient visual attributes in dense crowede scene with regions of rational movement”, VOL. 9, Issue 2 no 2.

48. Mr Harbi AlMahafzah, Dr. H.S. Sheshadri, 2012 “Multibiometric: Feature Level Fusion Using FKP Multi-Instance biometric”, Vol. 9, Issue 4, No 3.

49. A B Rajendra ,Dr H S Sheshadri, 2012 “A Study on visual Secret sharing schemes using biometric authentication techniques’, Vol 1, pp 157-160.

50. S Narasimha Murthy, Arun Kumar M N,Dr. H S Sheshadri, 2012 “Methods towards the Classification of Clustered Microcalcification’, 0975 – 8887.

51. Pushpa D ,Dr H S Sheshadri, 2012 “Multiple Object Detection and Tracking in Cluttered Region with Rational Mobile Area”, 0975 – 8887 Volume 39– No.10.

52. Arun Kumar M N, Dr. H S Sheshadri, 2012 “On the Classification of Imbalanced Datasets”, vol.44, issue 8, pp. 1-7.

53. V. Sridhar, Shylashree, Nagarjun Bhat, 2012 “FPGA implementations of high-speed elliptic curve cryptography: A survey”, International Journal of Scientific and Engineering Research (IJSER), Vol.3, No.03, 364-378, France. ISSN 2229-5518

54. Dr. V Sridhar , KR Sudhindra, 2012 “Root cause detection of call drops using feed forward neural network” IISTE Journal on Industrial Engineering Letter Vol2, no 6,

55. V. Sridhar, Shylashree, 2012 “Efficient implementation of scalar multiplication for elliptic curve cryptography using ancient Indian Vedic mathematics over GF (p)”,International Journal of Computer Applications (IJCA), Vol.49, No.07, 46-50, USA. ISSN 0975-8887

56. V. Sridhar, Shylashree, Nagarjun Bhat, 2012 “Efficient implementation of RSA encryption and decryption using ancient Indian Vedic mathematics”, CiiT International journal of Programmable Device Circuits and Systems (CiiT IJPDCS),Vol. 4, 342-348, India, DOI: PDCS062012005. ISSN 0974 – 9624

57. V. Sridhar, Shylashree, 2012 “High-speed FPGA-based elliptic curve cryptography using mixed co-ordinates”, International Journal of Elixir, Vol. 46, No 1, 8511-8516, UK. ISSN 2229-712X

58. V. Sridhar, Shylashree, Nagarjun Bhat, 2012 “FPGA implementations of Advanced Encryption Standard: A survey””, International Journal of Advances in Engineering and Technology (IJAET), Vol.3, No.02, 265-285, India. ISSN 2231-1963

59. Dr. V Sridhar, Anil Kumar M N, 2012 “A Technique to Speed up the Modular Multiplicative Inversion over GF(P) Applicable to Elliptic Curve Cryptography” International Journal of Computer Application (0975 – 888)Volume 47– No.16.

60. Anant R Koppar, V Sridhar, 2012 “Tele-Health Medical Diagnostics System with Integrated Electronic Health Records”, Indian Journal of Public Health Research and Development (IJPHRD, Volume 3, No 1, 49 - 52, ISSN: 0976-0245 / 0976-5506.

61. N.M. Mahesh Gowda, 2012 “Reviewing of potentials Aspects of DC-DC Controller” A study -Engineering Research and Technology (IJERT), 2278-0181

62. Revanesh.M, Sujatha D.Badiger, 2012 “ Performance of Smart and Flexible Parallel Concatenated Turbo Codes for Wireless Sensor Networks”, International Journal of Engineering Research and Development ISSN: 2278-067X, Volume 1, Issue 4, PP.53-63

63. Dr. K. N Muralidhara, H V Ravish Aradhya, 2011 “Design of Control unit for Low Power Paper Published in the year 2011

64. ALU Using Reversible Logic”, Volume 2, Issue 7, ISSN 2229-5518, pp. 01-07 65. Dr. K.N.Muralidhara Siddesh.G.K., Manjula.N.Harihar, 2011 “Routing in Ad-Hoc

Wireless Networks using soft computing techniques and performance evaluation using hypernet Simulator”, ISSN: 2331-2307, Volume -1, Issue 3.

66. Dr. K. N Muralidhara,H V Ravish Aradhya, G Mithun Kumar, 2011 “A Novel assertion based Methodology to verify mixed signal SOC designs in Digital and Mixed signal verification flow”, ISSN: 0975–5462, Vol. No. 3, Issue No. 6, June 2011, pp.4721-4727.

67. Dr. K. N Muralidhara H V Ravish Aradhya, G Mithun Kumar, 2011 “Modelling of complex analog circuits with assertions and automatic processing of Waveforms”, Vol. No. 6, Issue No.2, 220 – 223, ISSN: 2230-7818.

68. Dr. K. N Muralidhara,H V Ravish Aradhya, 2011 “Design of Low Power Arithmetic Unit based on Reversible Logic”, Vol. 1, Issue 1(30- 38), ISSN: 2231-3575.

69. Dr. K.N.Muralidhara Siddesh.G.K, 2011 “New Generation Routing Protocol over Mobile Ad-Hoc Wireless Networks based on Neuro-Fuzzy-Genetic Paradigm”, ISSN: 0976 - 1764 (Online); 0976 - 2205 (Print)

70. Dr. K.N.Muralidhara Siddesh.G.K, 2011 “Error Free Transport of Transmitter Payload Over Ad-Hoc Wireless Network Using Osculating Polynomial Cross Products”, Vol. 4, no. 1, 1 – 12, ISSN: 1313-6569, Contemporary Engg Science

71. Dr. K.N.Muralidhara Siddesh.G.K, 2011 “Bandwidth Reduction Of Ad-Hoc Network PayloadUsing Quadrature Mirror Filters and Lossless Compression Techniques”, ISSN 2231-3133 (Online) Vol. 1, Issue 2 , (57-63)

72. H.G. Rangaraju ,U. Venugopal ,Dr. K.N. Muralidhara,K.B. Raja, 2011 “Design of Efficient Reversible Parallel Binary Adder/Subtractor”, CNC 2011, CCIS 142, pp. 83–87.

73. Anant R Koppar, V Sridhar, 2011 “Malaria Parasite Detection : Automated Method Using Microscope Color Image”, International Journal of E-Health and Medical Communications (IJEHMC), Volume 2, No 2, 68-81, ISSN: 1947-315X

74. Dr. V Sridhar , KR Sudhindra , 2011 “Study of subscriber satisfaction in slotted aloha and resource allocation algorithms of GSM network” Elixir Journal on network 5141-5143,26

75. Mahendra Prashanth K.V. V. Sridhar, 2011 “The possible influence of noise frequency components on the health of exposed industrial workers – a review” International Journal of Noise & Health.

Paper Published in the year 2012 76. H.G. Rangaraju,U. Venugopal ,Dr. K.N. Muralidhara, K.B. Raja, 2010“Low Power

Reversible Parallel BinaryAdder/Subtractor”, Vol.1, No.3. 77. Dr. V Sridhar , KR Sudhindra, 2010 “Recent Trends in Optimizing live GSM Network”

ACEEE International Journal on Recent Trends in Engineering and technology Vol.4, Issue No.4, PP 22-25, Nov 2010

78. Anant R Koppar, V Sridhar, 2010 “An Automated Method for Differential Blood Counting Using Microscope Color Image of Isolated WBC”, International Journal of E-Health and Medical Communications (IJEHMC), Volume 1, No 4, 35-48, ISSN: 1947-315X

79. Meghana Kulkani, V Sridhar, G. H. Kulkarni, 2010 “The Quantized Differential Comparator in Flash Analog to digital converter design” pp 37-45, Volume 2-Number 4 International Journal of Computer Networks and Communication (IJCNC).

80. Meghana Kulkani, V Sridhar, G. H. Kulkarn, 2010 i “LCT Comparator in Low Power Flash ADC Design” International Journal of Recent Trends in Science and Engineering, Academy Publishers, Finland.

Paper Published in the year 2008 81. Mahendra Prashanth KV, Sridhar V., 2008 ” The relationship between noise frequency

components and physical, physiological and psychological effects of industrial workers”. International Journal of Noise & Health , 10:40:90-8

Department of Electrical and Electronics Engineering International journals: Paper Published in the year 2013 1. Dr.P.S Puttaswamy and Punith Kumar M B, Oct 2013.” A shot boundary detection

method for News video based human skin region(face) detection”. International journal of computer applications(IJCA).

2. Dr.P.S Puttaswamy and Lalithamma. Sept 2013.” Literature Review of Applications of Neural Network in Control Systems” International journal of Scientific and Research publications.

3. Dr.P.S Puttaswamy and H B Nagesh, April 2013.” Enhancement of voltage stability margin using FACTS controllers” International journal of computer and electrical engineering (IJCEE).

4. 1S.Narasimha Murthy And Dr.H.S.Sheshadri , Dec- 2013,” Abnormality detection in Digital Mammogram’’ International Journal of Computer Science and Information Technology (IJCSIT).Volume – 6, Issue 6 , pp 830-834.

5. S.Narasimha Murthy And Dr.H.S.Sheshadri, August 2013.” Mass Detection and Classification using Machine Learning Techniques in Digital Mammograms“ International Journal of Computer Applications (0975-8887) IJCA Volume 76-No.1.

6. Dr.S.S. Parthasarathy,Mahesh gowda, July 2013.” Reviewing Potentials Aspects of DC-DC Controllers: A Study” International Journal of Engineering Research & Technology (IJERT); Volume 2, Issue 7.

7. Dr.S.S. Parthasarathy,C.Nagaraju. March 2013 “Quality Measure for Information Hiding in Medical Images” International Journal of Computer Applications (IJCA) -Volume 65– No.11. Paper Published in the year 2012

8. Dr.P.S Puttaswamy and Surekha Manoj, DEC-2012.” Estimation and cost effective analysis of hybrid – wind/PV generation for rural/remote electrification” International journal of advances in engg and technology (IJAET).

9. Dr.P.S Puttaswamy and Surekha Manoj. DEC-2012” Improvement of power quality of grid integrated wind distribution generation by STATCOM” International journal of advances in engg and technology (IJAET).

10. Dr.P.S.Puttaswamy. and H.B Nagesh. May 2012.” Power Flow Model of Static VAR Compensator and Enhancement of Voltage Stability” International Journal of Advances in Engineering & Technology(IJAET)

11. Dr.P.S Puttaswamy and Anand Raju M B. Feb 2012.” Modified Interactive evolutionary computing for speed control of an electric DC Motor” International journal of computer applications (IJCA)

12. Dr.S.S. Parthasarathy,Smt. Usha Surendra, July-December 2012 “Genetic Algorithm Based Optimal Location of Series Facts Device to Reduce the Losses and Enhance Power Transfer in a Power System” International Journal of Analysis and Computation, Vol 8, No. 2, PP 71-84, ISSN : 0973-2861.

13. Dr.S.S. Parthasarathy,Smt. Usha Surendra, July-December 2012” Genetic Algorithm Based Optimal Location of Series Facts Device to reduce The Losses in a Power System” International Journal of IJESC: Vol. 4, No. 2, PP 91– 96.

14. . Dr.S. S. Parthasarathy,Smt. Usha Surendra, July-December 2012. “Application Of VAR Indices Method & Swarm Intelligence Algorithm on 220kv Real Time System to Locate Series Facts Device” International journal of IIJEP , Volume 4, Issue 2

15. S.Narasimha Murthy And Dr.H.S.Sheshadri , June 2012.” Methods towards the Classification of Clustered Micro calcifications” International Journal of Computer Applications (0975-8887) on Advanced Computing and Communications for HPC Applications(ACCTHPCA).

16. Gopiya Naik. S., D.K. Khatod., and M.P. Sharma, NOV 2012.“Distributed Generation impact on distribution networks: A Review” International Journal of Electrical and Electronics Engineering, Vol. 2, No. 1, pp. 68-712

17. Gopiya Naik. S., D.K. Khatod., and M.P. Sharma, September 2012.” Planning and operation of DG in distribution networks” International Journal of Emerging Technology and Advanced Engineering, Vol. 2, No. 9, pp. 381-388. Paper Published in the year 2011

18. Dr.P.S.Puttaswamy. and H.B Nagesh, Sep-nov 2011” Voltage Stability Enhancement using Shunt and Series FACTS CONTROLLERS” International Journal on Electronic and electrical Engineering, IJEEE.

19. Dr.P.S Puttaswamy and Surekha Manoj, July-sept 2011.” Importance of FACTS Controllers in power systems” International Journal of Advances in Engineering & Technology(IJAET).

20. Dr.P.S Puttaswamy and Anand Raju M B, July 2011” Genetic Algorithm: An approach to velocity control of an Electric DC Motor” International journal of computer applications(IJCA).

21. Dr.S.S. Parthasarathy,N.V.Archana, “ Evolutionary Algorithm Based Optimal Location of Series FACTS Device to Reduce the Losses in a Power System “International Journal of Electrical Components and Sustainable Energy (IJECSE).

22. Dr.B.Ramachandra,Usha A Joshi. October-2011.” Optimized Design of Bio-Sensor using Conducting Polymers and NANO-Composites” IJEST (International Journal of Engineering, Science and Technology) Journal , ISSN: 0975-5462: (Page No : 3392-3403) Vol. 3 No. 4.

23. Dr.B.Ramachandra. V. Muralidhara, 2008.” Study of Quality Assessment Insulators subjected to DC voltages”, The academic journal of High Voltage Engineering. Chongqing University, Chongqing, China, Issue no. 11.

Department of Industrial and Production Engineering International Journals Paper Published in the year 2013

1. Comparison of Fly ash with Coconut shell Powder and Tamarind powder on Green stand Mold Properties. H.M. NanjundaSwamy,Tataram K Chavan Vol.2(2013) ISSN:2278-621X.

2. Production and Evaluation of Properties of Al-Activated carbon and Al-Mica metal Matrix composites, Tataram K Chavan, H.M. Nanjundaswamy, (2013).

3. Multi-Objective Optimization of process parameters during solidification of Hypoeutectic Al-Si alloy casting using Genetic Algorithm”, Vardhaman S Mudakappanavar, H.M. Nanjunda swamyVol.2 Issue 4 July2013, ISSN:2278-621X.

4. Effect of Variation of Different Additives on Green sand Mold Properties for Olivine sand Tataram K Chavan1, H.M. Nanjundaswamy,2 Vol No1 Issue 4, Sept,2013 ISSN:2320-8791.

5. Modification of Eutectic Silicon Under The Influence of Mold Vibration During Solidification of LM6 Alloy castings. Vardhaman S Mudakappanavar, H.M.

Nanjundaswamy Vol.2(2013), Issue 4,Aug –Sept, 2013 ISSN:2278-621X. Issn: 2320-8791.

Paper Published in the year 2010 6. Effects of Hand –Arm and Whole-Body Vibrations on Heart of Motorcycle Rider –B S

Shivakumara, V Sridhar, International Journals of Vehicles Structures & Systems 2(2),74-79 ISSN:0975-3060 (2010).

7. Effect of Posture on heart Rate of the Motorcycle Rider, B S Shivakumara, V Sridhar, International Journal of Multidispl Research & Advcs. In Engg. ISSN 0975-7074, Vol 2, No.II, July 2010.

Paper Published in the year 2009 8. Tensile and Fracture Properties of Cast and Forged Composite Synthesized by Addition

of Al-Si Alloy to Magnesium”, H.M. Nanjundaswamy, S.K. Nath and S. Ray, Metallurgical and Materials Transactions A, Volume 40, Number 13 (2009), 3284-3293, DOI: 10.1007/s11661-009-0010-3.

Department of Information Science and Engineering

International Journals Paper Published in the year 2015

1. Minavathi , Tamanna. 2015. Text Detection in Video Frames through Bayesian Classification and Boundary Growing. International Journal of Emerging Technology and Advanced Engineering (IJETAE), ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 5, Issue 5.

2. Minavathi, M.Amrutha. 2015. Detection of micro-calcification in Ultra sound images. International Journal of Computer Science and Information Technology Research(IJCSITR), ISSN2348-1196,Vol-3,Issue 2, pp(905-910)

3. Saleem Pasha, Ajay Kumar, Syed Younus Hussain, Amritansh and Mohammed Shafi Ul Umam, 2015, Zone based and Morphological Based Feature Extraction Techniques for English Alphabets. Internation Journal of computer Science and Information Technology(IJCSIT), Vol. 6(3):2941-2944. Paper Published in the year 2013

4. Minavathi, Murali. S, Dinesh. M. S.2013. Dual Modality: Mammogram and Ultrasound Feature level Fusion for characterization of Breast Mass. International journal of Innovative Technology and Exploring Engineering (IJITEE), Volume-2, Issue-4, 2013, ISSN: 2278-3075. Paper Published in the year 2012

5. Minavathi, Murali. S, M. S. Dinesh, 2012 Classification of Mass in Breast Ultrasound Images using Image Processing Techniques. International Journal of Computer Applications (IJCA), 42(10):29-36 Paper Published in the year 2011

6. Minavathi, Murali. S, M. S. Dinesh. 2011. Model based approach for Detection of Architectural Distortions and Spiculated Masses in Mammograms. International Journal of Computer Science and Engineering (IJCSE), Vol. 3 No. 11 , pp. 3534-3546, ISSN : 0975-3397

7. Minavathi, Murali. S, M. S. Dinesh. 2011. Curvature and shape analysis for the detection of spiculated Masses in breast ultrasound images. Springer sponsored International Journal of Machine Intelligence (IJMI), Volume 3, Issue 4, pp-333-339, ISSN: 0975–2927 & E-ISSN: 0975–9166.

Department of Mechanical Engineering International Journals: Paper Published in the year 2015

1. H. V. Ravindra, Y.D.Chethan, Y.T.Krishne Gowda. and Mohan Kumar G.D., “Parametric optimization in drilling EN-8 tool steel and drill wear monitoring using Machine vision applied with Taguchi method”, Procedia Materials Science, Volume 5, 2014, pp. 1442-1449.

2. G.Ugrasen, H.V.Ravindra, G.V.Naveen Prakash and Y.N.Theertha, “Prasad Optimization of process parameters in wire EDM of HCHCr material using Taguchi’s technique”, Materials today: Proceedings, 2015, (Accepted).

3. Y D Chethan, H V Ravindra, Y T Krishne gowda and Bharath Kumar S, “Machine vision for tool status monitoring in turning Inconel 718 using blob analysis”, Materials today: Proceedings, 2015, (Accepted).

4. B.M.Umesh gowda, H.V.Ravindra, G.V.Naveen Prakash, P.Nishanth and G.Ugrasen, “Optimization of process parameters in drilling of epoxy Si3N4 composite material”, Materials today: Proceedings, 2015, (Accepted).

5. U.Prakash, S.L.Ajith Prasad and H.V.Ravindra, “Study of parametric influence on dry sliding wear of Al-SiCp MMC using Taguchi technique”, Materials today: Proceedings, 2015, (Accepted).

6. S.Prathik Jain, H.V.Ravindra, G.Ugrasen, G.V.Naveen Prakash and K.Anil Kumar, “Estimation of Surface Roughness and AE Signals while Machining of Titanium grade-2 Material in WEDM”, Journal of Computational Methods in Sciences and Engineering, IOS press, STM publishing house (Accepted).

7. Y D Chethan, H V Ravindra, Y T Krishne Gowda and Bharath Kumar S, “Application of Digital Image Processing in Parametric Optimization of Turning Inconel 718 by Taguchi Technique with Coated Carbide Inserts”, Journal of Computational Methods in Sciences and Engineering, IOS press, STM publishing house (Accepted).

Paper Published in the year 2014 8. H.V. Ravindra, H.R. Gurupavan, B.M. Umeshgowda, G.V. Naveen Prakash, G.

Ugrasen, “Optimization of process parameters in drilling Al-Si3N4 metal matrix composites material using Taguchi technique” International Journal of Advances in Manufacturing and Materials Engineering AMME-2014, Vol. 5, pp. 2207-2214.

9. S Ghanaraja, S Ray, S K Nath, “Synthesis and Characterization of γ-Al2O3 Nano Powder by Disc Milling of Al and MnO2 Powder” Material Science Journals Elsevier Publications in Procedia Materials Science-5 on 2014, PP: 416 – 425.

10. S Ghanaraja, Vinuth kumar K L, Raju H P, and Ravikumar K S, “Processing and Mechanical Properties of hot extruded Al (Mg) - Al2O3 Composites” International Journal of Metallurgical and Materials Transactions A (The Minerals, Metals & Materials society and ASM International 2014), on July -2014, Vol: 45, Issue: 8, PP: 3467-3480.

Paper Published in the year 2012 11. Jagadeesha K. M, Nagaraju T., Sharma Satish C and Jain S. C., “3D Surface

Roughness Effects on Transient Non-Newtonian Response of Dynamically Loaded Journal Bearings”, STLE Tribology Transaction, Vol. 55(1), pp. 32-42, 2012.

12. H. V. Ravindra and K.M.Sathish Kumar ”Vibration analysis of defective spindle bearings and gear of a lathe tool structure using finite element analysis”, International Journal of computer applications in Engineering, Technology and Sciences (IJ-CA-ETS), Vol. 4, Issue. 1, Oct-2011 to March 2012. pp. 233-239.

13. H. V. Ravindra, S. L. Ajit Prasad, T. D. P. Rajan, U.Prakash and Abhinandhan K.S ”Tool wear prediction by regression analysis in turning A356 with 10% Sic. “Journal of recent advances in intelligent computational systems”.

Paper Published in the year 2011 14. H. V. Ravindra and Nixon Kuruvila, “Parametric Influence and Optimization of Wire

EDM on Hot Die Steel using Taguchi Technique & Genetic Algorithm” International Journal of Machining Science & Technology, Vol. 15, No. 1, 2011, pp. 47 -75.

15. H. V. Ravindra and Nixon Kuruvila, “Multi-Objective Optimization and Influence of Process parameters in WEDM using Genetic Algorithm on various steel materials” International Journal of Advances in Material science & Engineering (Accepted).

16. H. V. Ravindra and Naveen Prakash G. V., “Acoustic Emission Signals for Monitoring of Spindle Bearing in Drilling Machine”, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol. 4, Issue. 1, 2011, pp. 127 - 130.

17. H. V. Ravindra and Sudev L. J., “Thrust, Torque And Tool Tip Temperature Signals For Monitoring Cutting Tool In Drilling Process”, Accepted for publication in International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol. 4, Issue. 2, 2011.

18. H. V. Ravindra, Y. T. Krishnegowda, C.J.Gangadara Gowda, Vikram C.K and Manu “Numerical simulation of two dimensional unsteady flow past two square cylinders”, The proceedings of the international joint journal conference on Engineering and Technology -2011,p.p 355-360.

19. Srinivas H. K., Dr.K.S.Srinivasan and Dr.K.N.,Umesh., “Application of Artificial Neural Network and Wavelet Transformfor Vibration Analysis of Combined Faults of Unbalance and Shaft Bow”, International Journal of Advances in Theoreticaland Applied Mechanics, Vol. 3, no. 4, 2010, pp 159-176.

Paper Published in the year 2010 20. Srinivas H. K., Dr.K.S. Srinivasan and Dr.K.N.,Umesh., “Role of Artificial Neural

Network and Wavelet Transform forCondition Monitoring of Combined Faults of Unbalance and Cracked Rotors”, International Journal of Acoustics and Vibration, Vol 15, No 3, pp 121-127, 2010.

21. Srinivas H. K., K.S. Srinivasan K.N., Umesh., “Role of Artificial Neural Network and Wavelet Transform for Vibration Analysis of Combined Faults of Unbalance and Bearing Clearance”, The International Journal of Sound and vibration.(Under Review).

22. Aswatha, C. J. Gangadhara Gowda, S. N. Sridhara, T. R. Seetharam and K. N. Seetharamu, “The effect of bottom wall temperatures on the natural convection in an air-filled square cavity with symmetrically cooled side walls” Journal of Energy, Heat and Mass Transfer (JEHMT), under review.

Paper Published in the year 2010 23. K. Kumar, S L Ajit Prasad, “Critical Issues in Assessment of Over-Speed and Burst-

Margin In Aero-Engine Discs”, Int. journal on Engineering Trends and computer application, Sangli. India, ISSN: 0974-3596, Volume 2, Issue 1, OCT ‘09 – MARCH ’10, Pp: 85-90.

24. H. V. Ravindra and Nixon Kuruvila, “Optimization and Influence of Process parameters using Taguchi Technique on various Steel Materials” Journal of Mechanical Engineering (Accepted).

Paper Published in the year 2009 25. H. V. Ravindra and K. M. Sathish Kumar, “Monitoring the Machine Elements of a

Lathe by a Multisensory Approach using Finite Element Analysis”, International Journal of Vibration & Control, JVC - 115, 2009.

26. H. V. Ravindra and Naveen Prakash G. V., “Estimation of AE Parameters for Monitoring Spindle Bearing in a Drilling Machine Using Multiple Regression and GMDH”, Journal of Manufacturing Engineering, Vol. 4, Issue. 3, 2009, pp. 168-174.

Department òf Mathematics International Journals: Papers Published in the year 2015 1. Dr.Puttaswamy, K.B. Murthy “On The Equitable Degree Polynomials of Graphs”,

International Journal of Pure and Applied Research in Engineering and Technology, 2015; Vol.4 (3): 31-46,.

2. Dr.Puttaswamy, K.B. Murthy “The End Equitable Domination in Graph”, journal of Computer and Mathematical Sciences,vol.6 (10).538-549.October2015,

3. Dr.Puttaswamy, Mahammed hezaam Ali Alatif “Boundary Edge Domination in Graphs” International Mathematical Virtual Institute (IMVI), 2015,

4. Dr.Puttaswamy, A.C. Dinesh “TheMinimum maximal Domination Energy of a Graph” Indian Journal of Mathematics and its Applications (IJMA) Volume 3, Issue 3(2015),

5. Dr. A.T. Eswara and K.R.Jayakumar. “Variable Viscosity Effect on MHD Free Convection Flow over a Porous Plate with Suction and Injection”, International Journal, Page 153-159, Vol.1, No.4, 2015, Papers Published in the year 2014

6. A. H. Srinivas and Dr. A.T. Eswara. “Unsteady MHD Laminar Boundary Layer Flow and Heat Transfer due to an Impulsively Stretching Surface”, International Journal, Issue 7, pp.32-40 2014

7. A. Girisha, R. Murali and B. Shanmukha.“Hamiltonian Lacebility in Ring Product and Cyclo product of Graphs”, British Journal of Mathematics and Computer Science 4(13): 1857-1864, 2014. Papers Published in the year 2013

8. A. H. Srinivas and Dr. A.T. Eswara. Unsteady free convection flow and heat transfer from an isothermal truncated cone with variable viscosity, International Journal, Vol 57, pp.411-420, 2013,

9. Dr. A.T. Eswara and K.R.Jayakumar. MHD Laminar Boundary Layer Flow and Heat Transfer Over a Moving Cylindrical Rod, International Journal, Page 2281-2290, Vol.223 , 2013, Papers Published in the year 2012

10. Dr. A. T. Eswara and Poornima Unsteady MHD axisymmetric boundary layer flow with slot suction (injection) in the presence of variable viscosity, International Journal, Vol. 6, No. IV, pp.63-75, 2012,

11. Dr. A. T. Eswara and G.N. Rajappa Evaluations of Ramanujan’s Cubic Continued Fraction G(q) by Modular Equations, International Journal, Vol.I, No.1, pp.49-67, 2012,.

12. Dr. A. T. Eswara and G.N. Rajappa Further evaluations of Ramanujan-Weber class invariants gn”, International Journal, Vol.15, No.3, pp.241-258, 2012,.

13. Dr. A. T. Eswara and G.N. Rajappa Further Explicit Evaluations of Ramanujan’s Cubic Continued Fraction, International Journal, Vol.2, No.2, pp.504-523, 2012,.

14. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa.The Laminar Boundary Layer on a Moving Cylindrical rod with an Applied Magnetic Field, International Journal, Page 636-639, Vols. 110-116 2012,

15. Dr. A. T. Eswara and G. Ashwini Unsteady Two Dimensional MHD Boundary Layer Flow with Slot Suction (Injection) and Temperature-Dependent Viscosity, International Journal, Volume 4, No.3, 2012, pp. 203-215,.

16. Dr.Puttaswamy, K.B. Murthy“The split equitable domination number of a graph”. Asian Journal of current engineering and maths (AJCEM).Vol. 1, No. 6 (2012), Papers Published in the year 2011

17. Dr. A. T. Eswara and Poornima.Non-uniform slot suction (injection) into MHD axisymmetric boundary layer flow with variable viscosity, International Journal, Vol. 1, No.1, pp.78-85, 2011,

18. Dr. A. T. Eswara and Poornima.Effects of non-uniform slot suction (injection) into MHD boundary layer flow over a sphere, International Journal, Vol.7, No.1, pp. 19-27, 2011,

19. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa.Unsteady MHD Free Convection Flow from a Porous Vertical Plate with Suction (Injection), International Journal, Page 661 670, Vol.33 No.2, 2011,

20. Dr. A. T. Eswara and G. Ashwini Effects of Non-Uniform Slot Injection (Suction) Into Two Dimensional MHD Boundary Layer Flow with Temperature- Dependent Viscosity, International Journal, Volume 143, pp. 1301-1312, 2011,.

21. Dr. A. T. Eswara and G. Ashwini.Non-Uniform Slot Injection (Suction) into MHD Boundary Layer Flow over a Cylinder, International Journal, Volume 5, No. 1, pp. 35-43, January-June 2011,

22. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa. Unsteady Natural Convection MHD Flow from a Porous Vertical Flat Plate with constant Heat Flux and Suction (Injection), International Journal, Page 377-384, Vol.5, N0.II, 2011, Papers Published in the year 2010

23. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa The effect of Localized Wall Heating (Cooling) on Unsteady MHD Mixed Convection Flow Over a Vertical Plate, International Journal, Page 183-193, Vol. 9, No.1 - 2, 2010,.

24. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa Effects of suction and injection on the unsteady free Convection flow and heat transfer from a porous Vertical flat plate with constant heat flux, International Journal, Page 256-261, Vol.26 , 2010,.

25. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa Unsteady nonsimilar two-dimensional ethanol boundary Layers with temperature- dependent viscosity and Prandtl number, International Journal, Page 857- 865, Vol.90 , 2010,.

26. Dr.Puttaswamy “The strong domatic numbers of factors of graphs”. J. Comp. & Math. Sci. Vol.1 (7), 921-924(2010),

27. . B. Sooryanarayana, B. Shanmukha, ChandruHegde and Vishukumar “Metric Dimension of composition products of Graphs”, International of Computational Science and Mathematics. Volume2, Number1(2010), PP. 147-160

Papers Published in the year 2009 28. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa.Unsteady Natural Convection

Boundary Layer Flow from a Porous Vertical Flat Plate with Suction and Blowing, International Journal, Page 69-76, Vol. 1, No. 1, 2009,

29. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa. Axisymmetric MHD Boundary Layer Flow and Heat Transfer with Variable Viscosity, International Journal, Page 271-276, Vol.3, No.2, 2009,

30. Dr. A.T. Eswara, K.R.Jayakumar and A.H.Srinivasa. MHD Forced Convective Axisymmetric Flow with Temperature – Dependent Viscosity and Viscous Dissipation, International Journal, Page 98-106, Vol.3 No. 3, 2009 and 4,

Department of Physics

International Journals: Papers Published in the year 2014 1. Shivakumara B C, M S Chandrashekara, L Paramesh, T S Shashikumar and Karunakara

N Analysis of 226Ra, 232Th and 40K in the host rock and the soil samples and assessment of radiological risks for Mandya region, India.,. International Journal of Integrative Sciences, Innovation and Technology, Vol.3, Issue 2, Page 18-24, (2014).

2. Shashikumar T S, M S Chandrashekara and L Paramesh. Radioactivity Concentration of 226Ra, 232Th and 40Kin Soil, Rock and Water samples around Mysore city and its Biological Effects. International Research Journal of Applied sciences, Vol. 1, Issue 1, Page 22-25, (2014).

Papers Published in the year 2011 3. Shashikumar T S, M S Chandrashekara and L Paramesh Studies on Radon in soil gas and

Natural radionuclides in soil, rock and ground water samples around Mysore city.. International Journal of Environmental Sciences, Vol. 1, No. 5, (2011), 786, [ISSN: 0976-4402]. Papers Published in the year 2009

4. Shashikumar T S, M S Chandrashekara, N Nagaiah, and L Paramesh. Variations of Radon and Thoron concentrations in different types of dwellings in Mysore city, India. Radiation Protection Dosimetry, UK, Vol. 133 (1), (2009), 44; doi: 10.1093/rpd/ncp001.

5. Shashikumar T S, N Ragini, M S Chandrashekara and L Paramesh Radon in soil and its concentration in the atmosphere around Mysore., Indian Journal of Physics, Vol. 83 (8), (2009), 1163.

Department of Chemistry International Journals: - Papers Published in the year 2016 1. Satish Kumar Murari and M. V. Shwetha. Effect of antioxidant butylated hydroxyl

anisole on the thermal or oxidative stability of Sunflower oil (Helianthus Annuus) by ultrasonic. Journal of Food Science and Technology, January 2016, Volume 53, Issue 1, pp 840-847.

Papers Published in the year 2015 2. Akshatha A, Sundara Rajan. J. and H. Ramachandra Understanding the Reaction kinetics

of DBDS under Thermal Ageing of Mineral Insulating oil., International Journal of Chemistry, ISSN, 2051-2732, 36. 1746-1753 (2015)

3. Akshatha A, Sundara Rajan. J. and H. Ramachandra Laboratory Validation of Method of Solvent extraction fir removal of Sulphur compounds from Mineral oil., IEEE Transactions on Dielectrics and Electrical Insulation, 22, 5, 2572 - 2580, Oct - 2015.

4. Akshatha A, Sundara Rajan. J. and H. Ramachandra Study of degradation of sulphur compounds and depletion of metal passivators during thermal ageing of mineral oil., IEEE Transactions on Dielectrics and Electrical Insulation, 22, 5, 2786 - 2797, Oct - 2015.

5. Akshatha A, Sundhara Rajan. J. and H. Ramachandra Moisture dynamics in paper oil insulation of sealed transformers in presence of sulphur compounds. Accepted in international Transactions on Electrical Energy System ,Wiley on 3rd , August- 2015

6. M.Guruprasad, V. Sridevi, P. Udaysri, M.Satish Kumar, G.Vijaya Kumar. Plant regeneration through callus initiation from mature and immature embryos of maize (Zea mays L). International Journal of Multidiciplinary Advanced Research Trends. Vol 2, Issue 2, 2015. Papers Published in the year 2014

7. Chandrashekar, B.M. Venkatesha , S. Ananda, N. M. Madegowda Oxidation of Piperazines by Bromamine-B in Acidic Buffer Medium: A Kinetic Mechanistic Study.Research and Reviews: Journal of Chemistry. Vol. 3, issue 4, (2014)..

8. Chandrashekar, R.T. Radhika, B.M. Venkatesha, S. Ananda. Oxdative Decolorisation of Indigocarmine dye by Chloramine-T in acidic buffer (pH= 5.8) medium catalysed by Nitrite ion: A Kinetic and Mechanistic study International Journal of Current Research 6, (5),PP- 6781-6786 (2014).

9. Chandrashekar, R.T. Radhika, B.M. Venkatesha, S. Ananda. Kinetic and Mechanistic Study of Oxidation of Oxidation of Nicotinamide by Bromamine-T in hydrochloric acid medium catalysed by Ru(III) ion.International Journal of Current Research. 6,(1),PP- 4567-4571 (2014).

10. Chandrashekar, B.M. Venkatesha, S. Ananda, N. M. Madegowda Kinetic and Mechanistic Study of Oxidation of Piperazines by Bromamine-T in Acidic Medium. Modern Research in Catalysis (MRC), 2,157-163, (2013). (USA), .

11. Chandrashekar, B.M. Venkatesha, S. Ananda Kinetics of Oxidation of Vitamin-B3 (Niacin) by Sodium N-bromo-benzenesulphonamide Bromamine-B) in HCl Medium and Catalysis by Ru(III) ion. Research Journal of Chemical Sciences (International Science Congress Association) 2,(8), 1- 5, (2012)..

12. Kinetic and Mechanistic Study of Oxidation of Cholesterol by Chloramine-T in Alcohol Medium. International Journal of Analytical, Pharmaceutical and Biomedical Sciences.1, (3), PP- 59-63. (2012). Chandrashekar, B.M. Venkatesha, S. Ananda.

13. M. Guru Prasad, V.Sridevi and Satish Kumar.M. Fructooligosaccharides - type prebiotic : A Review. Journal of Pharmacy Research 2014,8(3),321-330. M. Guru Prasad, V.Sridevi and Satish Kumar.M. Efficient plant regeneration from cotyledonary node of blackgram (Vigna mungo (l.) hepper). International Journal of Advanced Biotechnology and Research. Vol 5, Issue1, 20-24 2014.

14. M. Guru Prasad, V.Sridevi and Satish Kumar.M. Efficient plant regeneration of Green gram (Vigna radiata (L.) Wilczek) via cotyledonary explant. International Journal of Advanced Research. Volume 2, Issue 2, 55-59 2014.

Papers Published in the year 2009

15. Satish Kumar Murari, J. Dong, S. Sutor, T. Kislinger, D. A. Wigle. Novel Nuclear Proteins in Mouse Lung Alveolar Development.Journal of Heart and Lung Transplantation - J Heart Lung Transplant. 01/2009; 28(2). Papers Published in the year 2008

16. Yerigeri MC, Murari SK, Thimmaiah KN, Math SK, Vishwanath BS. Anti-tubercular and anti-inflammatory activities of azetidin-2-one derivatives and their effects on the activity of Phospholipase A2. Medicinal Chemistry, 4,(2),190-193, -March,2008.

Department of Master of Business Administration

International Journals Presented in the year 2015:

1. Mohan.N, Dr.J. Gajendra Naidu, Dr.Somashekar.P. “Impact Of Marketing Mix Strategies To Re-Launch Sick Supermarkets With New Business Models In Rural Areas” Jadbm Publications Issn /Isbn No: 2395-7441/7328.

2. Chandrika R “Role Of Csr In Transforming Of Higher Education System In India” Published In The Thematics Journal Of Commerce & Management, Vol-5, Issue 3,( October 2015) Sp Issue I, Pp 203-218) Isnn 2231-4881

3. Pooja Nagpal “Role Of Csr In Transforming Of Higher Education System In India” Published In The Thematics Journal Of Commerce & Management, Vol-5, Issue 3,( October 2015) Sp Issue Ii, Pp 154-163) Isnn 2231-4881

4. Mohan.N, Dr.J. Gajendra Naidu, Dr.Somashekar.P. “ A Study On Repositioning Of Modren Retail Mall’s In India With Respect To Green Building’s".: Primax Publications, Published On October – 2015 Issue No 3 Issn /Isbn No: 2321/3604/3612.

5. A S Mahesh A Study On Employee Satisfaction At “Gokaldas Exports” Srirangapatna, Mandya District ,Karnataka State. Accepted , Published In International Journal Of Technology And Business Management (Ijtbm) Issn 2319-6815 In July - September 2015.

Presented in the year 2014:

1. Dr. Alure Gowda” Impact Of Brand Equity On Customer Satisfaction- A Study On Samsung Refrigerators In Bangalore City “At Department Of Business Management Velagapudi Ramakrishna Siddhartha Engineering College Vijayawada- 520 007 Published On 28th March 2014

2 Dr. Alure Gowda “Brand Equity And Customer Satisfaction: A Study Of Lg Air Conditioner In Mysore” International Journal Of Management Research And Review Volume 4/Issue 2/Article No-4/207-214 Issn: 2249-7196.

3 Dr. Alure Gowda “Management Education In Higher Education - Issues And Challenges” Abhinavinternational Monthly Refereed Journal Of Research In Management & Technology Volume Iii, Issn – 2320-0073.

4 Dr. Alure Gowda “Role Of Multi-National Companies In Indian Consumer Durable Industry – An Empirical Study” International Journal Of Management, It And Engineering Volume 4, Issue 1 Issn: 2249-0558.

5 Dr. Alure Gowda “A Study On Brand Image Towards Nandini Products At Manmul In Mandya” International Journal Of Engineering And Management Research Volume-3, Issue-6, Issn No.: 2250-0758.

6 Dr. Alure Gowda “A Study On Brand Awareness With Special Reference To “You” Broadband In Bangalore City” Vsrd International Journal Of Business And Management Research, Vol. Iii Issue Xii E-Issn : 2231-248x, P-Issn : 2319-2194

Presented in the year 2013:

1. Dr. Alure Gowda “A Study On Service Quality In Education Institution At Mandya, Karnataka” International Journal Of Management And Social Sciences Research, Volume 2, No. 12, Issn: 2319-4421

2. Dr. Alure Gowda “A Study On Consumer Preference Towards Samsung Televisions Brand In Bangalore City” International Journal Of Marketing, Financial Services & Management Research,Vol.2, No. 12, Issn 2277- 3622

3. Dr. Alure Gowda “Consumer Behavior Towards Refrigerator In Mysore City” International Journal Of Research In Commerce, It & Management Vol. No. 3, Issue No. 11 Issn 2231-5756.

4. Dr. Alure Gowda “Role Of Brand Awareness In Health Care Industry” Abhinav International Monthly Refereed Journal Of Research In Management & Technology, Volume Ii, Issn – 2320-0073.

5. Dr. Alure Gowda “Stress Among Students – A Study Of Mba Students In Mysore District” Asia Pacific Journal Of Marketing & Management Review Vol.2 (11), Issn 2319-2836.

6. Dr. Alure Gowda “A Study On Customer Relationship Management With Special Reference To Household Appliances At Mandya, Karnataka” International Journal Of Management Research And Review, Volume 3/Issue 9/Article No-2/3559-3564 Issn: 2249-7196.

7. A S Mahesh “Career Management In Manufacturing Sector – A Case Study Of Triveni Engineering And Industries Ltd ,” Issn 2319-6885 In The Publication Of July –September Quarter 2013, International Journal Of Technology And Business Management.

8. Dr. Kiran Kumar “A Comparative Study Of Public And Private Cellular Service Providers In Karnataka State - An Empirical Study Using Factor Analysis” Published In The International Journal Of Marketing And Technology(Ijmt), New Delhi. Volume: 03, Issue 10 (October 2013). Pg.233-238. Issn: 2249-1058.

9. Dr. Kiran Kumar “Indian Telecom Sector – Witnessing A Revolution” Published In The Iosr Journal Of Business And Management (Iosr-Jbm), New Delhi. Volume: 11, Issue 1 (May-June 2013). Pg.62-67. Issn: 2319-7668.

10. Dr. Alure Gowda “Impact Of Service Quality On Customer Satisfaction At Axis Bank” International Journal Of Managementand Social Sciences Research, Volume 2, No. 3, Pp 63-67. Issn: 2319-4421

11. Dr. Alure Gowda “Customer Perception Towards Sms Advertising” International Journal Of Management, It And Engineering, Volume 3, Issue 3, Pp 305-405 Issn:2249-0558.

12. Dr. Alure Gowda “Impact Of Brand Trust And Brand Affect On Brand Loyalty” International Journal Of Engineering And Management Research, Vol.-3, Issue-1, Pp 8-12 Issn: 2250-0758.

13. Dr. Alure Gowda “Organized Retail Strategy: A Study At Loyal World Supermarket” Iosr Journal Of Business And Management (Iosr-Jbm), Volume 7, Issue 1 Pp 75-80, Issn : 2278- 487x.

14. Dr. Alure Gowda “Retail Service Quality And Its Effect On Customer Perception: A Study Of Select Supermarket In Mangalore” Vsrd International Journal Of Business

And Management Research, Vol. 3 No. 1, Pp 1-6 E-Issn: 2231- 248x, P-Issn 2319- 2194.

Department of Master of Computer Application International Journals: Papers Published in the year 2015 1. M.N.Veena, Shruthi.S.J and T. Vasudev, 2015. “Detection of Oriented Number Plate in

Vehicle Using Autocorrelation features from Gray Level Co-occurrence Matrix” Second International Conference on Computer Science and Engineering (CSEN 2015) Dubai, UAE, August 28-29Volume 5, Number 14, August 2015 AIRCC Publishing Corporation ISBN: 978-921987-42-7 Accepted for publication in IJMA (International Journal of Multimedia and its Applications).

2. M.N.Veena and T. Vasudev, 2015. “A parallel computing model for segmentation of vehicle number plate through watershed and visualization technique” The international journal of engineering and science(IJES) Vol.4 issue 6.pp:63-68 June 2015 ISSN(e):2319-1813, ANED (American National Engineering Database) indexed.

3. M.N.Veena, Shruthi.S.J and T. Vasudev, 2015. “Detection of skew & Mirror images in Vehicle No. plates using Radar Transform and geometric moments” International Journal of new innovations in Engineering and technology(IJNIET) Vol.3 issue 2 PageNo. 6-11. ISSN 2319-6319.May 2015.

4. M.N.Veena, Arpitha.K.S and T. Vasudev, 2015. “Performance Evaluation of Different automatic seed point generation techniques for segmentation of Indian Vehicle no. Plate” International Journal of Computer Engineering and Technology (IJCET) Vol 6. Issue 5 Page no.36-46. May 2015.

5. Shruthi.S.J, Arpitha.K.S, and M.N.Veena, 2015. “Automatic reading of vehicle numbers from number Plate" International Journal of Computer Applications (IJCA) 0975-8887 Page no. 1-4. May 2015. Papers Published in the year 2014

6. M.N.Veena and T. Vasudev, 2014. “Performance Evaluation of Number Plate Segmentation Algorithm from Vehicle Image” International Journal of Combined Research and development (IJCRD), Vol. 3, Issue 5, November 2014.

7. Mohan Kumar H P and Nagendraswamy H S, 2014 “Fusion of silhouette based gait features for gait Recognition,” "International Journal of Engineering & Technical Research", IJETR, Vol. 02, Issue 08, August 2014, pp 101-107.

8. Mohan Kumar H P and Nagendraswamy H S, 2014 “Symbolic Representation and Recognition of Gait: An Approach based on LBP of split Gait Energy Images,” Signal and Image Processing: An International Journal (SIPIJ), Vol 05, No 4, August 2014, pp 15-28.

9. Mohan Kumar H P and Nagendraswamy H S, 2014 “Change Energy Image for Gait Recognition: An Approach based on Symbolic Representation,” International Journal of Image, Graphics and Signal Processing (IJIGSP), Vol. 6, NO. 4, pp. 1-8, March 2014. Papers Published in the year 2011

10. Mohan Kumar H P and Nagendraswamy H S, 2011“Gait Recognition Based on Symbolic Representation,” International Journal of Machine Intelligence, Vol. 3, Issue 4, December 2011, pp-295-301.