Internal Flush Timber Doors Using Egger Cores & … · Safe Sound Suited Sustainable Morland is part of Newmor Group Ltd, a family owned business that was established 50 years ago

www.morland-uk.com

MorlandUnit 4, Buttington Cross Enterprise Park, Welshpool, Powys, SY21 8SLT +44 (0)1938 551 980 F +44 (0)1938 554 [email protected]

Internal Flush Timber Doors Using Egger Cores & Surfaces

IN PARTNERSHIP WITH

Collection 2017 - 2020

Safe Sound Suited Sustainable

Morland Internal Flush Timber Doors.Door kits and door sets using Egger cores and finishes.Working with Egger, Europe's leading manufacturer of matching laminate, solid core & hollow core doors andwood based panels, Morland allows you to create stylish suited interiors on mass market budgets.

SafeMorland fire doors based on Egger cores are tested by Exova to BS476 Part 22 (1987) and are third party accredited by the British Woodworking Federation under the BWF-Certifire Scheme.

SoundMorland fire doors based on Egger cores have been tested by Sound Research Laboratories to BS EN ISO 10140-2:2010, achieving 32dB sound reduction from 44mm doors.

SuitedMorland doors faced with Egger melamine or laminate match perfectly with other Egger surfaces in the room design.

SustainableMorland doors are supplied as FSC 100% content and can be supplied as door sets with FSC MIX 70%.

ContentsIntroduction 3 - 4Benefits 5 - 6Performance Guide 7 - 8Passage of Sound 9 - 10What is inside the door? 11 - 12What is on the door face? 13 - 14What’s different about our door edges? 15 - 16Surfaces & Textures 17 - 18Door Set Supply 19 - 20Forever Firecheck™ 21 - 22How does the supply operate? 23 - 24How to Buy 25 - 26Decor Availability Guide 27 - 28Neutral Uni Colours 29 - 34Colourful Unis 35 - 36Stone, Concrete & Textile 37 - 38Metals 39 - 40Artwood & Exotics 41 - 44Classic Wood 45 - 50Oaks 51 - 56Include doors within your interior design 57 - 58Door Range Finish Selector 59 - 62


Look for FSC® certified product


Morland is part of Newmor Group Ltd, a family owned business that was established 50 years ago.Morland offers fully finished timber-based products for interior fit outs. Our core products are doors, decorative panels and architectural wrapped profiles.

With continuous investment in staff training and modern plant, we deliver a quality of finish that can only come with factory production control. Our factories are based on the England/Wales border and provide 200,000 sq feet from which we manufacture and deliver across Europe.

Our experienced and technically competent staff are here to guide you through your purchase from material selection right through to installation and maintenance.

Should you have any questions please call us on +44 (0)1938 551 980 or email us at [email protected].

Introduction

Combining our experience andprocessing capabilities with a modernISO 9001 quality controlledenvironment, and using Egger‘sstunning range of surfaces & materialsdelivers unrivalled quality & value.

Morland s offer in brief

✓ Laminate surfaces bonded to fire door blanks.

✓ Door blanks lipped with ABS edging to create high performance door leafs.

✓ MDF moulded and wrapped for door frames and finishing timbers.

✓ Performance door sets machined and assembled.

CPL SurfacesHuge selection of Continuous Pressure Laminate (CPL) finishes pressed to the face of the door blank using PUR adhesive.

IronmongeryWe supply and fit high quality ironmongery as part of our high performance door set fabrication process.

Wrapped MDFMorland moulds and wraps MDF for fully finished door frames and finishing timbers.

ABS LippingDurable, cost effective ABS lipping bonded to door blanks using PUR adhesive.

Factory Production ControlsMorland operates an ISO 9001 quality management system.

4

‘


BenefitsWhy choose our doors?

Fire doors are a vital safety device engineered to save lives and property. As a participating member of the BWF-CERTIFIRE Fire Door Scheme, Morland is rigorously third party assessed and audited, providing you with the security and confidence that our product will perform as expected when it matters most.

In addition, the BWF-CERTIFIRE labelling scheme provides traceability throughout the supply chain, ensuring you can always contact the manufacturer if further information on the fire door is required.

Safe

Since July 2003 Building Regulations in England and Wales have included stringent specifications for resistance to passage of sound. Duty of care and quality of life requirements in residential properties mandate a minimum sound reduction of 29dB on residential threshold doors and 30dB for school classrooms.

Morland’s 44mm solid core door leaf achieves a 32dB reduction tested to BS EN ISO 10140-2:2010 standards.

Sound

Morland doors faced with Egger melamine or laminate match perfectly with other Egger surfaces in the room design.The perfectly co-ordinated interior can now be achieved without a massive budget. High impact surfaces can be protected with laminate and more general vertical surfaces can use melamine.

Suited

Both Egger and Morland operate an FSCⓇ chain of custody certification scheme, thereby allowing all the timbers elements:

✓ To be sourced with full traceability back to responsible forestry.✓ The look of tropical hardwoods without harm to the environment.

Sustainable

Morland FD30 Fire Doorwith laminateU708Light Grey

Laminate FlooringH2756Arlington Oak Creme

LaminateH3170Natural Kendal Oak

PerfectSenseU999 PGU999 PMBlack

Eurodekor MFCU390Indian Red

Eurodekor MFCU350Siena Orange

Eurodekor MFCU163Curry Yellow

LaminateH3170Natural Kendal Oak

WorktopsW1000Premium White

6


Performance Guide

Fire - FD30/FD60Morland fire doors are compliant with Part B of Building Regulations. They are tested in the UK toBS476 part 22. The Global assessment Chilt/A13085 rev C gives the full details.

Passage of SoundMorland fire doors comply with Part E of Building Regulations (test C/22323/T01 conducted by Sound Research Laboratories). In the test the 44mm thick FD30 door achieves 32dB and with the addition of drop seals and glazing can achieve 35dB. The 54mm thick FD60 door achieves 34dB and can score 36dB with additional seals and glazing.

Access DoorsMorland doors are available in wider door widths as required by Part M of Building Regulations.

Secure by DesignMorland has PAS23/24 Secured by Design approval for door sets. At the time of writing, Egger doorshave not been incorporated into that scope, but this will be included in due course.

DurabilityTested to BS EN 1192/DD171 Severe Duty.For many years BS DD 171 : 1987, provided the frame work to which doors and door sets could be tested and evaluated. This standard is now superseded and strength and durability are now classified and tested by European standards. Morland doors are compliant with both sets of standards.

Book MatchingNo need. All Morland doors are a consistent durable colour.

BWF Certifire Scheme MemberMorland doors have third party accreditation to provide assurance they are tested and achieve the standards of BS476 Part 22.

8


Passage of Sound

Making a shout into a whisper.The decibel scale is logarithmic. An increase of 10dB equates approximately to a doubling of perceived sound.

The 44mm Egger door blank reduces the passage of sound by 32dB. Building Regulations require 29dB so the additional 3dB might seem insignificant. However, being logarithmic, 3dB represents a 30% additional reduction in sound transfer.

100dBCannonfiring

35dBElephanttrumpeting

30%LessNoise

Building Regs Morland Door

29dB 32dB

10


What is inside the door?Hollow CoreA premium look combined with lightweight, high strength, sustainable materials, make Morland hollow core doors an ideal solution for domestic doorsand commercial wardrobes.

3mm MFC skin

2mm ABS edge banding on all four sides

Hollow Core18mm - 50mm

10 or 65mmchipboard rails

Honeycomb cardboard 12mm - 44mm

Solid Core & FD30 Fire Doors High quality materials make these ideal for higher traffic severe duty cycle areas. Tested to BS EN1192.

2mm ABS edge banding on all four sides

FD30 Fire Doors44mm

FD60 Fire Doors54mm

Solid severe duty core

FD60 Fire Doors As with the FD30 fire doors, these are tested to BS EN1192, making them suitable for high traffic severe duty cycle areas.

8 - 20mm hard wood lipping all four sides

Solid severe duty core

Melamine orlaminate face

Laminate face

12


What is on the door face?

The essence of the Morland door offer is the abilityto finesse the door surfaces to deliver co-ordinated finishes with exact cost control.

Durability is key with door faces; UV lacquer sealed wood veneers and painted finishes are tried and tested solutions for doors. The down side to wood veneer is that over time the UV lacquer wears and the doors, where handled regularly, begin to show discoloration from dirt. With painted doors it can be time consuming to achieve a consistent high quality finish on site.

Morland provides solutions by producing either Melamine or Continuous Pressure Laminate (CPL) faced doors. In general CPL has the highest durability rating of any finish and the Morland offer brings that option into a never-seen-before price bracket. Melamine, veneer and paint have similar durability ratings, but the melamine finish from Morland is the most cost effective.

With Morland‘s offer, your CPL and melamine finishes can be matched, so circulation doors with CPL surfaces can be coordinated with service riser or entrance doors with melamine faces.

High traffic areas such as circulation doors and entrance doors can be specified with hard wearing laminates ensuring extended life cycles.

Doors that need to withstand lower levels of impact such as rest room doors and wardrobe doors can be faced with more cost effective melamine.

Surface Wear Comparison Grid

Commercial UseFire Doors

Options Matches Other Doors

Need For Book Match?

AbrasionResistance

Circulation Areas

Painted Yes No Good

Veneer Yes Good

CPL Yes No Excellent

Entrance Doors

Painted Yes No Good

Veneer Yes Good

MFC Yes No Good

CPL Yes No Excellent

En-suite & ServiceRiser Doors

Painted Yes No Good

Veneer Yes Good

MFC Yes No Good

Laminate Face

Hard wearing surfacefor circulation doors

Melamine FaceFD30 Fire Door

Cost effective lower traffic solution

Melamine FaceSolid Core Door

Edge banded and sealed

Melamine FaceRobe Door

Morland Face FrameRobe system

14


What’s different aboutour door edges?Morland lips the door on all four edges with aco-ordinated edge banding as standard.

44mm W1000 Premium White door with matching edge banding

Morland is able to edge band doors in finishes that exactly match the door face using Egger finishes, so the colour co-ordination is maintained.

To provide you choice, or for DDA purposes, contrasting finishes can also be applied by Morland to support themed design elements.

Door Appearance

With the increased air tightness demanded in new construction, the force required to open a fire door can be significant, leading to failure to comply with Part M of Building Regulations on maximum opening forces.

Morland puts a 2mm radius on the lipping so the opening force required is not hindered by a vacuum forming around the door seal.

The 2mm ABS edging used makes the door edge highly resilient to the knocks received in daily use.

Timber doors for ensuite facilities are subject to moist, humid conditions. If the door top is exposed timber the changes in moisture can cause the door to warp and bind in its frame.

Morland doors are lipped on all four sides to prevent moisture ingress.

Morland doors are fully-finished and the lipping does not require laquering on site. A leading edge can also be applied in thefactory if required.

The width tolerance on Morland door leaves is +/- 1mm soadjustment on site is unnecessary.

Door Operation

Stability

Site Finishing

16


Innovative Surface Textures & Colour ConsistencyFinishes have evolved rapidly over recent years thanks to technical innovation, becoming increasingly realistic both in surface look and feel. Grain and texture can now be aligned, producing a product indistinguishable from solid wood finishes.

Demonstrating this evolution, below are three generations of Egger’s oak decors:i. Light Ferrara Oak developed over 10 years ago, and still popular today.ii. Natural Bardolino Oak, a more textured, realistic oak decor from 2012.iii. Sand Gladstone oak from the new generation of Feelwood finishes where printed grain and texture align.

Morland has taken advantage of these developments with our doors. Wood finishes not only look and feel real but eliminate the need for book matched pairs as every door is a consistent colour. Surface properties also comply with current wear standards and regulations (EN438:2005) so you can specify them safe in the knowledge that they offer high resistance to abrasion and scratches. To top the offer off, if a replacement door is needed it will perfectly match what is already in situ.

Surfaces and Textures

Horizontal wood grain H3309 ST28 - Sand Gladstone Oakwith matching end grain edge banding

H1334 ST9 – Light Sorano Oak

(i) (ii) (iii)

H3303 ST10 – NaturalHamilton Oak

H3309 ST28 – Sand Gladstone Oak

18


Door Set SupplyThe principle behind the Morland door set is to make the assembly on site as simple as possible. All doors are supplied serviced for hinges and fitted with applicable ironmongery as standard.

ArchitraveSupplied mitred to suit the door size avoiding waste and speeding up installation on site. Hoffman mechanical dovetails are used to ensure a tight invisible joint.

Frame MaterialFSC® as standard, the lining is 30mm thick Moisture Resistant MDF to suit standard, FD30 or FD60 ratings. It can be paint grade or fully finished veneer wrapped. A wide range of lining widths are available to suit varying wall construction details.

HingesThree hinges, stainless steelheavy duty class 13 CE markedand Certifire approved, are used on all fire doors. They can be lift-off or traditional butt. Fire rated hingepads are fitted as required.

Frame ConstructionThe Morland system is optimised for using MDF rather than softwood. Morland uses confirmats rather than wood screws for fixing the frame header to the jambs. The lining jambs are pre-drilled on the top to receive the confirmats. The frame can be supplied loose or assembled.

Fixing PointsThe fixing points for the frame to the opening are located in a groove that is covered by the door stop to hide the screw heads. The pre-drilled holes are set, and counter sunk.

IronmongeryGood quality ironmongery with a 10-year guarantee is supplied as standard or the client can supply their own.

Door StopThis has a tongue to locate into the groove in the lining. The door stop is supplied cut to size to avoid waste on site.

Co-ordinated OptionsThe door leaf, frame, architrave and stop canbe colour co-ordinatedto give a fully finished suited effect.

Beech

Cherry

Oak

Intumescent SealColour coordinated seals are fittedaccording to the performance required.

20


Forever Firecheck™

The only door frame system on the market with concealed intumescent seals.

Forever Firecheck™ is a patent pending (Pat. Pending 1600870.8) innovation to the market.

A standard proven intumescent seal from, e.g. Lorient; is placed into the frame in the traditional manner. Morland then wraps the frame in a decor such as a wood veneer and the seal is encapsulated leaving no unsightly visible presence.

Benefits

✓ The seal cannot be damaged or removed, either from wear and tear or willful act.✓ Unsightly plastic seals need no longer impair the aesthetic of timber frames.

Applications

CE Marked Door SetsWith the forthcoming arrival of CE marking for fire door sets, it is imperative that the door set manufacturer is able to ensure the correct seal stays in place through installation and decoration.Standard practice on site is to remove seals for the decoration of the frame. How can a Certificate of Conformity have any substance if a critical component is removed in installation? Even temporarily removing them and re-instating them invites errors and reduces the adhesion the strip has to the frame.

Mental Health FacilitesIntumescent seals have been associated with a number of harmful incidents and standard practice now is to cut strips into small lengths and screw them into the frame.

“High End” Residential Door FramesFor installations where the door and frame are key design aspects, such as luxury apartments, the requirement for a plastic strip in the frame is unwelcome. Forever Firecheck™ allows the strips to be concealed.

22


How does the supply operate?Doors are generally made to order with certain popular decors, including white, carried in limited stock quantities.

CPL Faced Fire DoorsThe range of door laminates is off-the-shelfand so small orders (not less than 10) of laminate faced doors, pressed and lipped by Morland, can be fulfilled in 7 to 10 days.

Melamine Faced Hollow Core DoorsThese doors are produced in Austria and shipped in full loads to Morland for lipping and processing. Typically this requires a minimum order quantity of 120 per colour/width and requires a 6 week lead time.

Melamine Faced 44mm Solid Core Fire Rated & Non Fire Rated DoorsThese doors are produced pre-decorated by Egger in Hexham and are delivered to Morland for lipping and processing. Typically this requires a minimum order quantity of 72 and a 4 week lead time.

Door SetsFor wrapping profiles with Egger decors, Morland requires a minimum order quantityof 100 sets. The lead time for this is 6 weeks.For doors in paint grade frames the minimum order quantity is 10 and the lead timeis 4 weeks.

24


How to Buy

Visualise your ideasIf you want to visualise your ideas,Egger has a virtual design studio (VDS). You can place Egger decors into a wide variety of available room sets or uploadyour own images.www.egger.co.uk/vds

Need a sample?You can request samples of finishes from Morland or directly from Egger.www.egger.co.uk/shop

Case GoodsMorland does not manufacture case goods.

Morland is the route to market for Egger door blanks.

Call or email us Tel: +44 (0)1938 551 980Email: [email protected]

26


The following Morland availability guide is intended to show you colours which can be applied to our doors and matching furniture board, so that the co-ordination of decors is perfect. Overleaf there are 120 decors which are all available on short lead times from UK stock. This range in melamine finish can be applied to 44mm hollow core doors and furniture board.

Egger offers over 300 decors, so if a decor that you are considering is not in this guide, it may still be available on a door leaf. You will also need to consider surface textures, which cannot be shown in this literature.

If your demand is for a significant volume on a continuing basis,please talk to us as it is possible to have bespoke colour if volumesare sufficient.

Our sales teams can provide the detail on combining doors, and furniture elements with complimentary colours, textures and surface quality. They can also provide guidance on surface selection and tailoring the lowest cost solutions. If you have questions please don’t hesitate to contact us.

The entire Egger colour range guide with a useful 9 grid matching system, to which this guide is intended to be a companion, can beseen at: www.egger.com

Decor Availability Guide

28


Alpine White W1100

Porcelain White

Premium White

W1200

W1000

Glacier White W1300

Neutral Uni Colours

Platinum White W980Painting Grade GF

Basic colours in white, beige, brown, grey and black tones -timeless, universal and flexible.

30


Brown Grey U795Cosmos Grey

White Grey

U899

U775

Graphite Grey U961Black U999

Stone Grey U727Dust Grey

Dakar Grey

U732

U717

Lava Grey U741Pearl Grey U763

Silver Grey U765

Neutral Uni Colours

32

Light Grey U708


Magnolia U215Vanilla Yellow U108

Mussel U100

Sand Beige U156Pebble Grey

Alabaster White

U201

U104

Crema Beige U222Cashmere Grey U702

Neutral Uni Colours

34


Colourful Unis

Chilli Red U323

Smoke Blue U507Denim Blue U540

Indigo Blue U599Fjord Green U636

Finished in a modern matt texture, the colourful unis add additional bold choices to available colour tones.

36


Boston Concrete F283

Ceramic Anthracite F311Quartz Cubanit F488

Stone, Concrete & Textile

Beige Linen F425Grey Linen F426

Increasingly in vogue for doors and enhanced by new textures, our stone, concrete and textile finishes are popular in domestic and commercial projects alike.

38


Lava Grey Metallic U507Blue Grey Metallic U540

Metals

Brushed Aluminium U599Aluminium U636

Warm and cool interpretations of metal, each with a high quality, pearlescent surface finish.

40


Artwood & ExoticsExciting artwood interpretations of real wood grain pattern orcolour and exotic, eye-catching woodgrains with distinctive,striking characters.

Mali Wenge H3058

White Havana Pine

Antique Brown Borneo

H3078

H3048

Black Havana Pine H3081

Amazonas H3082Shorewood H3090

42


Lava Savona H1793

Natural Savona

Brown Grey Avola

H1796

H1484

Coco Bolo H3012

Macassar H3025Dark CordobaOlive H3031

Graphitewood H1123

White Avola

Whitewood

H1474

H1122

Champagne Avola H1476

Green Grey Avola H1477Truffle Brown

Avola H1478

Artwood & Exotics

44


Classic WoodsFeaturing fashionable softwood or walnut wood types in addition to classics, like beech and fruit woods. These colours natural elements make the decors look particularly authentic.

White Cape Elm H3760

Dark Brown Cape Elm

Natural Dijon Walnut

H3766

H3734

Natural Mandal Maple H3840

Natural Tauern Beech H3911Natural

Country Beech H3991

46


Tobacco Pacific Walnut H3702

Natural Aida Walnut

Natural Pacific Walnut

H3703

H3700

Tobacco Aida Walnut H3704

Natural Carini Walnut H3710Natural Hickory H3730

Mainau Birch H1733

Natural Canadian Maple

Sand Beige Provincial Elm

H1869

H1725

White Fleetwood H3450

Champagne Fleetwood H3451Graphite Grey

Fleetwood H3452

Classic Woods

48


Bavarian Beech H1511

Maple

Pasadena Pine

H1521

H1486

Ellmau Beech H1582

Verona Cherry H1615Grey Brown Toronto Walnut H1713

Navarra Ash H1250

Sand Lyon Ash H1298Cascina Pine H1401

Classic Woods

50


OaksLight or dark, knotty and rustic or stripy and elegant, oak is varied and timeless. Whatever variation of oak you require you’ll find it here.

Grey Nebraska Oak H3332

White Gladstone Oak

Natural Nebraska Oak

H3335

H3331

Sepia Gladstone Oak H3342

Natural Lancaster Oak H3368Light Winchester

Oak H3382

52


Oiled Kendal Oak H3171

Natural Hamilton Oak

Natural Kendal Oak

H3303

H3170

Sand Gladstone Oak H3309

Tobacco Gladstone Oak H3325Grey Beige

Gladstone Oak H3326

Graphite Denver Oak H1387

Truffle Brown Denver Oak

Winchester Oak

H1399

H1381

Natural Davos Oak H3131

Truffle Brown Davos Oak H3133Tobacco Charleston

Oak H3155

Oaks

54


Light Sorano Oak H1334

Natural Helena Oak

Light Calais Oak

H1342

H1319

Natural Aragon Oak H1372

Sand Orleans Oak H1377Brown Orleans

Oak H1379

Truffle Bardolino Oak H1158

White Halifax Oak

Grey Bardolino Oak

H1176

H1146

Natural Halifax Oak H1180

Tobacco Halifax Oak H1181Light Lakeland

Acacia H1277

Oaks

Black Brown Sorano Oak H1137Natural Bardolino

Oak H1145

56


Our vision is to allow the designs and features of Egger surfaces to be included on internal doors in an easy and cost effective way.

To that end this guide focuses on decors that are readily available in the UK on furniture board, so doors and other furniture components can match.

If you want a particular design that is not shown overleaf but is in the Egger collection, then it may be possible to deliver that as a door solution. It will depend upon quantities and lead times.

Please contact our sales team for detailed availability information.

Include doors within your interior design

58


Painting Grade GF •Platinum White W980 • S0502-G50Y 9016 -Glacier White W1300 •Porcelain White W1200 • S1002-G50Y 9016 -Alpine White W1100 • S0500-N - -Premium White W1000 • S0500-N 9016 -Black U999 • S0500-N 9005 3C2XGraphite Grey U961 •Cosmos Grey U899 •Brown Grey U795 • S6005-Y20R 7006 -White Grey U775 • S1002-Y - -Silver Grey U765 • S3502-G - 421 UPearl Grey U763 • S2500-N - -Lava Grey U741 • S7502-Y 7013 405 CDust Grey U732 • S5000-N 7037 423 UStone Grey U727 • S4005-Y50R - 407 CDakar Grey U717 • S3005-Y20R 7032 -Light Grey U708 • S2000-N 7047 420 CCashmere Grey U702 • S2005-Y60R - 406UCrema Beige U222 • S0505-Y40R - -Pebble Grey U201 •Sand Beige U156 • S2005-Y40R - -Alabaster White U104 • S0505-Y10R 1013 -Mussel U100 • S2005-Y20R - 1 UVanilla Yellow U108 • S1005-Y20R 1015 -Magnolia U215 • S1010-Y30R 1015 -

Decor Name ProductCode

AvailableMatching

Guide

Colour References

NCIS RAL Pantone

Neutral Uni Colours

Fjord Green U636 •Indigo Blue U599 •Denim Blue U540 • S3010-R90B - 651 USmoke Blue U507 •Chilli Red U323 • S1580-R - 1805 C

Colourful Unis

Grey Linen F426 •Beige Linen F425 •Quartz Cubanit F488 •Ceramic Anthracite F311 •Boston Concrete F283 •

Stone, Concrete & Textile

Shorewood H3090 •Amazonas H3082 •Black Havana Pine H3081 •White Havana Pine H3078 •Mali Wenge H3058 •Antique Brown Borneo H3048 •Dark Cordoba Olive H3031 •Macassar H3025 •Coco Bolo H3012 •Natural Savona H1796 •Lava Savona H1793 •Brown Grey Avola H1484 •Truffle Brown Avola H1478 •Green Grey Avola H1477 •Champagne Avola H1476 •White Avola H1474 •Graphitewood H1123 •Whitewood H1122 •

Artwood & Exotics

Aluminium F509 •Brushed Aluminium F501 •Blue Grey Metallic F477 •Lava Grey Metallic F447 •

Metals

60

Door Range Finish Selector

Continuous Pressure LaminateThese decors are available in matching CPL finishes for 54mm and 44mm, Solid Core and fire rated doors.

Melamine Faced Hollow CoreThese decors are available for hollow core doors as well as on 18mm furniture board.

Melamine Faced Chipboard These decors are available from stock for FD30 and Solid Core doors as well as on 18mm furniture board.


Natural Country Beech H3991 •Natural Tauern Beech H3911 •Natural Mandal Maple H3840 •Dark Brown Cape Elm H3766 •White Cape Elm H3760 •Natural Dijon Walnut H3734 •Natural Hickory H3730 •Natural Carini Walnut H3710 •Tobacco Aida Walnut H3704 •Natural Aida Walnut H3703 •Tobacco Pacific Walnut H3702 •Natural Pacific Walnut H3700 •Graphite Grey Fleetwood H3452 •Champagne Fleetwood H3451 •White Fleetwood H3450 •Thermo Pine H3420 •Anthracite Mountain Larch H3406 •White Mountain Larch H3403 •Natural Canadian Maple H1869 •Mainau Birch H1733 •Sand Beige Provincial Elm H1725 •Grey Brown Toronto Walnut H1713 •Verona Cherry H1615 •Ellmau Beech H1582 •Maple H1521 •Bavarian Beech H1511 •Pasadena Pine H1486 •Cascina Pine H1401 •Sand Lyon Ash H1298 •Navarra Ash H1250 •

Light Winchester Oak H3382 •Natural Lancaster Oak H3368 •Sepia Gladstone Oak H3342 •White Gladstone Oak H3335 •Grey Nebraska Oak H3332 •Natural Nebraska Oak H3331 •Grey Beige Gladstone Oak H3326 •Tobacco Gladstone Oak H3325 •Sand Gladstone Oak H3309 •Natural Hamilton Oak H3303 •Oiled Kendal Oak H3171 •Natural Kendal Oak H3170 •Tobacco Charleston Oak H3155 •Truffle Brown Davos Oak H3133 •Natural Davos Oak H3131 •Truffle Brown Denver Oak H1399 •Graphite Denver Oak H1387 •Winchester Oak H1381 •Brown Orleans Oak H1379 •Sand Orleans Oak H1377 •Natural Aragon Oak H1372 •Natural Helena Oak H1342 •Light Sorano Oak H1334 •Light Calais Oak H1319 •Light Lakeland Acacia H1277 •Tobacco Halifax Oak H1181 •Natural Halifax Oak H1180 •White Halifax Oak H1176 •Truffle Bardolino Oak H1158 •Grey Bardolino Oak H1146 •Natural Bardolino Oak H1145 •Black Brown Sorano Oak H1137 •

OaksDecor Name Product

Code

AvailableMatching

Guide

Colour References

NCIS RAL Pantone

Classic Woods

62

Door Range Finish SelectorContinuous Pressure LaminateThese decors are available in matching CPL finishes for 54mm and 44mm, Solid Core and fire rated doors.

Melamine Faced Hollow CoreThese decors are available for hollow core doors as well as on 18mm furniture board.

Melamine Faced Chipboard These decors are available from stock for FD30 and Solid Core doors as well as on 18mm furniture board.

Documents

Internal Flush Timber Doors Using Egger Cores & … · Safe Sound Suited Sustainable Morland is part of Newmor Group Ltd, a family owned business that was established 50 years ago