Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
INTERNAL DOORSETSwww.jeld-wen.co.uk
TAKING OUR RESPONSIBILITIES SERIOUSLY
Forest Stewardship Council® (FSC®) certification ensures responsible sourcing of timber. This is available on request and must be agreed prior to order. Look for FSC certified products.
Programme for the Endorsement of Forest Certification (PEFC) certification ensures responsible sourcing of timber. This is available on request and must be agreed prior to order.
JELD-WEN aspires to be the industry leader in environmentally responsible practices and products. We have committed ourselves to more sustainable business practices and have adopted the ISO 14001 Environmental Management Standard to maintain and ensure continual improvement of our environmental performance.
It is our policy to operate our business in the following manner:
To comply with all UK Environmental legislation and prevent pollution. All emissions from our operations will be maintained within the standards required by local and national regulations.
To source all our materials from legal sources. In addition, we are committed to achieving the position where all timber purchases are from certificated legal and sustainable sources. We operate independently certificated and audited Chain of Custody procedures in each of our factories providing
Chain of Custody product certification where required by our customers. We will use materials from CPET recognised certification schemes where suitable materials are available outside Chain of Custody certification.
We operate a transport policy with the objective of reducing carbon emissions through the use of the following standardising on use of diesel powered vehicles; standardising on vehicles equipped with satellite navigation systems, to improve vehicle use efficiency and encourage the use of shared vehicles and rail travel where opportunities permit within the needs of the business.
We work with suppliers to promote responsible ethical conduct of their businesses. Additionally, we support local charitable and community cause particularly where common shared interests exist.
We have a programme of employee awareness, training and education across our business to ensure this policy is communicated and understood by our employees. We also publish this policy through our website to ensure it is publicly available and constantly up to date.
CONTENTSReadyfit™ Residential Doorsets 4
Standard Specification 6
Fire Doorset Specification 7
Ordering Readyfit™ 8
Door Styles 10
Installation Guide 14
Additional Doorset Applications 16
Securefit™ Flat & Apartment Entrance Doorsets 18
Doorset Specification 20
Ordering Securefit™ 21
Door Styles 22
Important Information 23
3
Linea Panel
Newark Glazed
www.jeld-wen.co.uk4
Real Wood Veneer, Walnut
5
READYFIT™
RESIDENTIAL DOORSETS
The Readyfit™ doorset is designed specifically for internal residential applications, and is a cost effective solution for fitting a door and frame as quickly and easily as possible. Readyfit™ doorsets are available as single doorsets or as doorset pairs, with a wide variety of door styles to choose from.
Supplied as a pre-hung set with architraves, hinges, latch or lock, door linings and door stops, the Readyfit™
doorset is a smart solution to save time, reduce cost and ensure quality.
Readyfit™ internal fire doorsets are also available with FD30 or FD60 fire rating.
• Supplied with MDF foil wrapped linings. Readyfit™ single doorsets are supplied assembled and handed as per your order
• Architraves and door stops are fully machined and packed with the doorset. Fixing brackets are pre-fitted to the side of the frames for ease of installation
• The door stop groove in the lining facilitates the concealed screw-fixing of the lining to the wall
MDF lining
• Solid reliable fixing system through the lining into the core of the wall
• Architrave tongue is self-adjusting to accommodate minor inaccuracies in partition widths
• Interlocking mechanical joints for a tight accurate fit of the architrave
• MDF moisture resistant foil wrapped linings, stops and architraves
Fire doorsets: MDF lining or hardwood door frames
• Fire doorsets are available as FD30, 30 minute fire rating using MDF linings. FD60, 60 minute fire rating doorsets are available in hardwood door frames only
• Available with standard intumescent strips only, or both intumescent and smoke seals fitted to the head and jambs of the lining or door frame. Supplied in either white or brown
Doorset pairs
Readyfit™ doorsets are also available to order as pairs. We supply these in knock down form and handed as per your order.
READYFIT™ • RESIDENTIAL DOORSETS
Cambridge, Doorset Pairs
STANDARD SPECIFICATION MDF LINING
1
2
3
4
5
6
7
8
9
1) HingesDoorsets are supplied with three 100mm hinges in bright nickel effect or satin finishes.
2) Architrave Available in the following styles: Ogee / Ovolo / Torus / Twice Rounded.
3) Latch or Bath Lock 65mm tubular latch or 65mm bath lock - both available in bright polished steel.
4) Lining Linings are 25mm thick plus 12mm for the stop, giving a total thickness of 37mm. Linings are available to suit all door thicknesses.
Size options are: 77mm / 90mm / 95mm / 100mm 115mm / 120mm / 125mm / 130mm / 140mm / 150mm
5) Door stops Supplied loose for ease of installation, stops are machined to complement our range of 35, 40 and 44mm doors. Door stops are supplied in two sizes 27mm or 71mm according to the lining depth.
6) Fixing brackets These brackets are supplied reversed for transport and can be easily adjusted when fitting the doorset.
7) Strap banded & braced For ease of distribution and handling during fitting.
8) Floor covering clearance Supplied with a 15mm clearance beneath the door.
9) Transporting bracket Supplied fitted to keep the door closed during transport and the fitting process.
Note: Doorset pairs are supplied unassembled.
6 www.jeld-wen.co.uk
Back of doorset as supplied
1
7READYFIT™ • STANDARD / FIRE DOORSET SPECIFICATION
FIRE DOORSET SPECIFICATIONMDF LINING
1) Lining and intumescent stripReadyfit™ fire doorsets are supplied with an FD30 fire rating as standard.
These doorsets are supplied with the same options as the standard MDF specification, with the addition of 10mm x 4mm intumescent strips fitted to the jambs and head to achieve 30 minute fire protection when fitted with an appropriate JELD-WEN fire door.
FD60 fire doorsets are also available on request, they are supplied with a hardwood unfinished frame with two 15mm x 4mm intumescent strips fitted to the jambs and head.
Installation – ReadyfitTM FD30
To add extra support due to the weight of the FD30 fire door, we recommend that one of the frame side hinge screws on the top two hinges is replaced with a 50mm screw (not supplied). This should be driven through the frame into the supporting studwork should it be felt necessary on site.
When fitting a fire doorset it is essential that additional fixing takes place through the door stop groove in the jambs. If there are any spaces (must be no more than 3mm) between the frame and the wall then an appropriate fire-resisting material must be used to fill those gaps.
Clear opening dimensions are determined by a number of components including 13mm stop + 3mm edge gap either side.
DOOR WIDTH + 6mm (edge gap either side) Minus 51mm (for 35mm thick doors) = CLEAR OPENING SIZE 56mm (for 40mm thick door) 60mm (for 44mm thick doors) 70mm (for 54mm thick doors)
ORDERING READYFIT™
When ordering your Readyfit™ doorsets there are several key factors you will need to take into consideration:
8 www.jeld-wen.co.uk
Single doorsets
Clear opening width
STRUCTURAL & CLEAR OPENING SIZES
HOW TO CALCULATE THE CLEAR OPENING SIZE
Door Size Imperial / Metric A
pp
Do
c M Structural Opening Size* Clear Opening Width
MDF Non FD &FD30
Hardwood FD60
35/40mm Thick
FD30 44mm Thick
FD60 54mm Thick
Single Doorsets
1981x457mm (6'6" x 1'6") 2036x522mm 412mm 403mm
1981x533mm (6'6" x 1'9") 2036x598mm 488mm 479mm
1981x610mm (6'6" x 2'0") 2036x675mm 565mm 556mm
1981x686mm (6'6" x 2'3") 2036x751mm 641mm 632mm
1981x762mm (6'6" x 2'6") 2036x827mm 717mm 708mm
1981x838mm (6'6" x 2'9") 4 2036x903mm 2051x938mm 793mm 784mm 774mm
1981x864mm (6'6" x 2'10") 4 2036x929mm 2051x964mm 819mm 810mm 800mm
1981x914mm (6'6" x 3'0") 4 2036x979mm 2051x1014mm 869mm 860mm 850mm
Metric 2040x526mm 2095x591mm 476mm 472mm
Metric 2040x626mm 2095x691mm 576mm 572mm
Metric 2040x726mm 2095x791mm 676mm 672mm
Metric 2040x826mm 2095x891mm 776mm 772mm
Metric 2040x926mm 4 2095x991mm 2110x1026mm 876mm 872mm 862mm
Doorset Pairs
1981x1066mm (6’6” x 3’6”) 2036x1131mm 2051x1166mm
1981x1168mm (6’6” x 3’10”) 2036x1233mm 2051x1268mm
1981x1220mm (6’6” x 4’0”) 2036x1285mm 2051x1320mm
1981x1372mm (6’6” x 4’6”) 2036x1437mm 2051x1472mm
1981x1512mm (6’6” x 5’0”) 2036x1577mm 2051x1612mm
*Note: Structural opening sizes include a 10mm width and 5mm height fitting tolerance.
BUILDING REGULATIONS APPROVED DOCUMENT M
App Doc M =MOBILITY PART M
Door HandingSupplied assembled and handed as per your order. Handing is determined when facing the door, with the hinge knuckle visible to the left or right side as the door opens towards you. Please state whether you require right or left hand when ordering.
POINTS TO CONSIDER BEFORE ORDERING YOUR DOORSETS
Ogee (69 & 50mm)
Torus (69 & 59mm)
Twice Rounded (69 & 45mm)
Ovolo (69mm)
Bright nickel SatinLeft hand hung Right hand hung
Door Styles Available
Moulded pg 10
Real Wood Veneer pg 12
Paint Grade pg 12
Glazed Fire Doors pg 13
9ORDERING READYFIT™ • READYFIT™
Note: Handles are not supplied with Readyfit™ doorsets
Lining WidthSize options available: 77mm / 90mm / 95mm / 100mm / 115mm / 120mm / 125mm / 130mm / 140mm / 150mm
Hinge OptionsDoorsets are supplied with three 100mm hinges and are available in a choice of two finishes.
Bath LockA 65mm bath lock option with thumbturn is available. This is supplied with a fully adjustable keep to prevent the door from rattling once fitted on-site
LatchA 65mm tubular bolt through latch is supplied as standard, available in polished steel.
Architrave OptionsMDF architrave is supplied foil-wrapped in white and is available in a choice of four styles. Architrave is pre-cut to length with a Hoffmann joint pre-machined when ordered with MDF linings, not available with timber linings.
DOOR STYLESThe Readyfit™ doorset range is available in traditional and contemporary door designs in a wide variety of styles, materials and types of construction. Choose from our most popular moulded, real wood veneer and paint grade interior doors in both panel and glazed designs.
10 www.jeld-wen.co.uk
MOULDED PANEL
BOSTONIAN OAKFIELD ARLINGTON ATHERTON CAMDEN CAMBRIDGE ROCKPORT®
Woodgrain finish
Smooth finish
Available as an FD30 Fire Doorset
Icon Guide
LINEA NEWARK
Moulded, 10 Light Etch
11READYFIT™ • DOOR STYLES
CORE TYPES:Standard: Our standard core is hollow which has one lock block to one side of the door for the lock or latch fitting. Approximate doorset weight of 18kg.
Middleweight: A semi solid core gives a sturdier, heavier feel, and provides a far greater fixing area for ironmongery. Approximate doorset weight of 21kg.
Heavyweight: Made using solid core that gives a door a substantial feel and help reduce sound transmission from one room to another. You can also fix ironmongery anywhere across the surface of the door. Approximate doorset weight of 34kg.
Fire Doors: FD30/FD60 fire doors achieving a 30 and 60 minute fire protection when fitted in a JELD-WEN Readyfit fire doorset. Approximate doorset weight of 39kg.
MiddleweightStandard Heavyweight FD60 54mmFD30 44mm
Moulded door glazing specification
All our moulded glazed doors are supplied with a contemporary glazing bead profile.
Clear
Etch
10 Light Etch
6 Light Etch
CAMDEN6 Light Etch
CAMDEN 10 Light Etch
CAMBRIDGE6 Light Etch
MOULDED GLAZED
ROCKPORT®
Leaded
NEWARK Vertical Etch
LINEA 1 Light Clear/Etch
LINEA 5 Light Clear/Etch
12 www.jeld-wen.co.uk
Doors 838mm wide and above comply with Approved Document M
MOBILITY PART M
Icon Guide
REAL WOOD VENEER
FUSION White Oak
FUSION White Oak 3 Light Clear
FUSION White Oak 1 Light Clear
FUSION Walnut
FUSION Walnut 3 Light Clear
FUSION Walnut 1 Light Clear
INLAY White Oak
INLAY White Oak 3 Light Clear
PAINT GRADESTANDARD RANGE
KOTO SAPELE WHITE OAK ASH BEECH WALNUT PAINTGRADE
PAINT GRADEPREMIUM
Real Wood Veneer, Fusion White Oak
SELECTION RANGE
Available as an FD30 Fire Doorset
13READYFIT™ • DOOR STYLES / ADDITIONAL DOORSET APPLICATIONS
PAINT GRADE, GLAZED FD30 FIRE DOORS
MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M
GW01 GW05 GW06 GW10 GW11 GW12
MOBILITY PART M
Aperture
App Doc MActual visible glass area (mm) WxH
Top margin (mm) Side margin (mm)
Distance between beads (mm)GC GW
GC01 / GW01 4 425x425 141.5 -
GC05 / GW05 4 4 118x728, 118x428 141.5 141.5 196
GC06 / GW06 4 4 118x1378 141.5 141.5 -
GC07 4 58x1668 141.5 Central 83
GC08 193x193 141.5 Central 104
GC09 4 425x1668 141.5 Central -
GC10 / GW10 4 478x883 141.5 Central -
GC11 / GW11 4 4 118x1118 401.5 141.5 -
GC12 / GW12 4 118x883 141.5 141.5 -
GC13 376x238 196.5 Central 113
GC14 238x376 141.5 Central 113
GC = Clear Glazed GW = Clear Georgian Wired Glazed
REAL WOOD VENEER, GLAZED FD30 FIRE DOORS
GC01 GC05 GC06 GC07 GC08 GC09 GC10 GC11
MOBILITY PART M MOBILITY PART M MOBILITY PART M MOBILITY PART M
GC12 GC13 GC14
All available in Ash, White Oak, Beech, Sapele, Koto & Walnut.
INSTALLATION GUIDE
STEP 3: Screw the fixing brackets to the wall. Only screw them hand tight at this stage until step 4 is complete.
STEP 4: Using a spirit level, check the doorset is positioned square in the opening at all edges, pack where necessary.
STEP 1: Unscrew all fixing brackets, reverse them and re-fit ready to offer the doorset to the opening.
STEP 2: Offer up the doorset into the opening, use packers on the edges of the doorset if required. To increase floor covering clearance, packers may be positioned under each jamb.
Doorsets are supplied plastic banded with a timber packing bar for distribution and ease of handling during fitting.
14 www.jeld-wen.co.uk
STEP 5: Fully tighten the screws in the fixing brackets.
STEP 6: Now the doorset is in place, remove the plastic banding and the timber packing bar.
STEP 7: Unscrew and remove the metal transport bracket at the top of the doorset.
STEP 8: Using a spirit level, make sure the door and the frame is plumb and square.
STEP 9: Using the timber packing bar removed in step 6, position onto the frame and slide down from top to bottom checking for tightness or excessive gaps.
Note: Fire doorsets require additional fixings, please refer to the BWF certifire label.
15READYFIT™ • INSTALLATION GUIDE
STEP 10: If you have excessive gaps you must add packers between the frame and the opening equally at either side.
STEP 11: Test the door closes into the frame correctly, ensuring that the door does not bind or catch in the frame.
STEP 12: Using the fixing guide illustration, measure from the top and bottom, screw through the lining into the wall where machined for the door stops.
STEP 13: Removing the top stop and pins, use packers to adjust between the frame and the opening and fix in the centre. Using grab adhesive or pins refit the top stop.
STEP 14: Fix the two vertical door stops in position, using an appropriate grab adhesive and pins.
STEP 15: Take two pieces of the architrave, (one edge and the top piece) and offer them together.
STEP 16: Using the Hoffmann Key provided assemble both pieces of the architrave together.
STEP 17: Apply an appropriate grab adhesive to the groove in the lining that the architrave will be positioned in.
STEP 18: Press the two pieces of architrave in place, making sure that all areas are clicked into position and the corner joint is a tight fit.
STEP 19: Add the final vertical piece of architrave, using a soft mallet if required. Making sure the architrave is level. Final fix using pins.
Repeat steps 15 to 18 on the reverse side of the door.
600m
m60
0mm
100
mm
100
mm
= Fixing points through the door stop groove in the lining.
FIXING GUIDE
ADDITIONAL DOORSET APPLICATIONSJELD-WEN can also manufacture additional specifications for projects that require doorsets for applications such as communal areas and service cupboards.
RISER DOORSETS JELD-WEN supplies Riser doorsets to conceal and hide service cupboards and to provide protection in the event of a fire. Designed and fire tested specifically for use in riser shafts running through larger buildings, these doorsets can be supplied with either a FD30 or FD60 fire rating.
JELD-WEN can machine Riser doorsets for different type of locks including FB Fire Brigade locks.
Supplied handed as per your order. The handing is determined when facing the door, with the hinge knuckle visible to the left or right side as the door opens towards you.
COMMUNAL DOORSETS JELD-WEN interior doorsets can also be specified for communal areas. Supplied with either a FD30 or FD60 fire rating, communal doorsets are designed to compartmentalise buildings in order to reduce the spread of fire.
Supplied with appropriate fire door hardware and intumescent strips fitted as standard, they are also available with an option for additional smoke seals.
We offer a wide range of Disability Discrimination Act (DDA) compliant glazed doors in a choice of designs and styles.
16 www.jeld-wen.co.uk
For further information and to discuss you specific project requirements call 0845 122 2891 or alternatively email [email protected]
Paint Grade, glazed FD30 fire door
Georgian wired, painted
17
1818
Real Wood Veneer, Fusion White Oak
SECUREFIT™
FLAT AND APARTMENT FD30 & FD60 ENTRANCE DOORSETS
JELD-WEN Securefit™ Doorsets are designed specifically for flat and apartment entrance situations where the highest standards in product performance are required. Available in popular moulded and veneer designs, these doors can be suited to other doors within the property to offer a co-ordinated and high quality look throughout.
Available with BWF-Certifire approved FD30 and FD60 fire door ratings and Secured by Design certification, the Securefit™ doorset offers ultimate style and substance. These doorsets comply with Approved Document M, B, E, L and Q of the Building Regulations:
Approved Document M: Available in a range of sizes for wider access.
Approved Document B: Securefit™ doorsets are tested to BS476 Part 22 and perform to FD30 and FD60 requirement providing 30-minute and 60-minute fire protection. FD60 only available on Real Wood Veneer and Paint Grade door options.
Approved Document E: The core construction, acoustic seals and drop down seals assist this product in compliance with acoustic regulations where flat entrance doors are required to have a sound reduction index of 29dBRw.
Approved Document L: JELD-WEN internal flat entrance doorsets provide improved conservation of fuel and power.
Approved Document Q: JELD-WEN internal flat entrance doorsets are tested in accordance with PAS 24, the standard required for compliance with Approved Document Q.
U values
• FD30 Moulded 2.0 W/m2K• FD30 Flush 2.0 W/m2K• FD60 Flush 1.8 W/m2K
BS 6375 Part 2: General performance
Requirements for door assemblies:• Latching test• Hardware operating test• Initiate movement test• Resistance to vertical loads• Resistance to static torsion• Slamming resistance• Resistance to humidity• Resistance to thermal variation
PAS 24: Enhanced security performance
Requirements for door assemblies:• Hard and soft impact test• Mechanical loading test• Cutting and manipulation test• Security hardware test
19SECUREFIT™ • FLAT & APARTMENT ENTRANCE DOORSETS 19
JELD-WEN is a member of the BWF-Certifire Fire Door & Doorset Scheme
Meets the requirements of PAS 24 and Secured By Design
Paint Grade Entrance
Doorsets
20 www.jeld-wen.co.uk
1
2
3
4
5
6
7
8
STANDARD SPECIFICATION
ViewerSilver door viewer fitted as standard.
Adjustable keepDoor keeps are fully adjustable when adjusting on site.
Multi-point lock3-point multi-point espagnolette lock.
HandleLever handle supplied and available in satin silver or chrome (optional).
CE certified hingesSupplied with three Grade 13 hinges in a choice of satin silver or chrome.
Drop down sealA Lorient drop down seal is supplied for improved acoustic performance.
Intumescent & acoustic seals Fitted into the head and jambs of the frames, are intumescent strips including smoke and acoustic seals.
Letter plate & cowlTS008 security tested letterplate FD30 and FD60.
1
5
2
6
3
7
4
8
Outside
Inside
21
ORDERING SECUREFIT™
When ordering your Securefit™ doorsets there are several key factors you will need to take into consideration:
Door Size Imperial / Metric
App Doc M Structural Opening Size
Clear Opening Width
FD30 FD60
1981x838mm (6’6” x 2’9”) 4 2051x938mm 784mm 774mm
1981x864mm (6'6" x 2'10") 4 2051x964mm 810mm 800mm
1981x914mm (6'6" x 3'0") 4 2051x1014mm 860mm 850mm
Metric 2040x926mm 4 2110x1026mm 872mm 862mm
STRUCTURAL & CLEAR OPENING SIZES
Door Styles Available
Moulded
Real Wood Veneer
Paint Grade
See page 22
Left hand hung Right hand hung
Door HandingSupplied assembled and handed as per your order. Handing is viewed from the outside of the door with the door opening away from you. Please state whether you require right or left hand when ordering.
Frame Choice
Handle & Cylinder Options
Optional Extras
Polished silver Grade 13.
Hinge OptionsDoorsets are supplied with three 100mm hinges and are available in a choice of two finishes.
Floor Covering Clearance - 20mm(10mm infill, 10mm drop seal action)Clearance can be adjusted by cutting or packing each jamb at the time of installation.
Satin silver Grade 13.
Polished silver handle and thumbturn .
Satin silver handle and thumbturn.
Satin silver.
Polished silver.
Optional satin silver or polished silver key / key cylinder - if required please specify on order.
Security chain silver.
Clear opening width
FD30 FD60
43m
m
42m
m
20mm15mm 15mm
13m
m
13m
m
66mm 87mm
43m
m
42m
m
20mm15mm 15mm
13m
m
13m
m
66mm 87mm
Softwood primed frame Hardwood unfinished frame
‘Handle height’
967mm from bottom edge of door to centre of spindle (1981mm high door)
1025mm from bottom edge of door to centre of spindle (2040mm high door)
*If measuring from the bottom of the jamb add 20mm.
SECUREFIT™ • STANDARD SPECIFICATION / ORDERING SECUREFIT™
BUILDING REGULATIONS APPROVED DOCUMENT M
App Doc M = MOBILITY PART M
Letterplate
MOULDED PANEL - FD30
DOOR STYLES
22 www.jeld-wen.co.uk
BOSTONIAN OAKFIELD CAMDEN ARLINGTON ATHERTON CAMBRIDGE ROCKPORT®
Woodgrain finish
Smooth finish
Icon Guide
FLUSH DOORS - FD30 & FD60 OPTIONS AVAILABLE
PAINT GRADE PAINT GRADE PREMIUM
ASH SAPELE KOTO LINEA NEWARK
WHITE OAK WHITE OAKINLAY
WHITE OAKFUSION
WALNUT WALNUTFUSION
IMPORTANT INFORMATION 23
Delivery
JELD-WEN doorsets should arrive on site shortly before planned installation; this will avoid unnecessary damage through handling and general site conditions.
Products should be thoroughly checked when delivered to ensure no damage has occurred during transport.
Doorsets can be delivered in house plots, with standard ironmongery fitted. Architraves and door stops are fully machined and packed with the door.
Storage
Doorsets should be stored in a cool, dry place and stackedlevel in a horizontal position with a sufficient gap belowthe stack to allow air circulation. Please note: do not storedoorsets in buildings that are being plastered or have recently been completed.
Decoration
If doors are supplied unfinished they should be decoratedin accordance with British Standard Code of PracticeBS6150: 2006 and BS8000 Part 5:1990. The stain or paintmanufacturer’s instructions must be followed.
All surfaces must be treated (sealed) at the same time toprevent distortion from moisture imbalance. A base coat stain or paint primer are in themselves not a seal. MDF foil wrapped linings, architraves and side panels can be left unfinished, however, if you wish to decorate we recommend one coat of water based gloss paint.
JELD-WEN internal joinery is NOT suitable for waxes, polishes, dyes and oils etc. Please refer to manufacturers instructions.
Maintenance
All ironmongery should be lubricated on a regular basis to ensure smooth and correct functioning. JELD-WEN doorsets can be cleaned using a damp cloth, no abrasive materials should be used as this can damage the face of the door.
Guarantees
JELD-WEN Readyfit™ and Securefit™ doorsets have a 10 year guarantee against manufacturing defects.
Factory finishing has a 5 year guarantee providing regular maintenance has been given to the door.
Ironmongery carries a 1 year guarantee.
For full terms and conditions along with further information on guarantees please refer to www.jeld-wen.co.uk
IMPORTANT INFORMATION
Year GuaranteeMANUFACTURING
10
Year Guarantee5
FACTORY FINISHED
Year GuaranteeIRONMONGERY
1
JELD-WEN MANUFACTURES AN EXTENSIVE RANGE OF JOINERY PRODUCTS.
JELD-WEN UK LTD
Retford Road Woodhouse Mill Sheffield South Yorkshire S13 9WH
INTERIOR & EXTERIOR DOORS
0845 122 [email protected]
WINDOWS,PATIOS,EXTERIOR DOORSETS & DOOR FRAMES
0845 122 [email protected]
STAIRS
0845 122 [email protected]
www.jeld-wen.co.uk
SS/M
F/JW
D28
87/2k/MARC
H20
19