Interlocking SnowflakeCrafter level: IntermediateTime needed: 15-20 minutes

How to make it1. Cut roughly around the outside of both snowflakes on your copy paper printout, leaving ¼ inch or more

of paper around both shapes.

2. Place both snowflakes on one sheet of card stock or on the front of a large, open greeting card. Tape in place.

3. With a craft knife or pair of sharp scissors, cut along the solid lines of your snowflake templates through both layers (paper and card stock). Use small hole punch for center hole on the No. 1 snowflake.

4. Carefully pull off any remaining taped pieces of the snowflake templates from the two card stock snowflake shapes.

5. Lift up one of the notched tips on your No. 2 card stock snowflake.

6. Slide your No. 2 snowflake through the large center opening of the No. 1 snowflake, aligning the small notches at the top and bottom. Press the notched tip of the No. 2 snowflake back down to “lock” them together.

What you’ll need• Printout of interlocking snowflake template on blank

copy paper

• Card stock or old greeting cards

• Craft knife and cutting mat or sharp scissors

• Tape

• Small hole punch

1.

2.

Lift Up

Interlocking Snowflake