Interior Boq

7/27/2019 Interior Boq

1/8

SL

NO.

PARTICULARS UNIT QTY RATE AMOUNT

A INTERIOR:

1 FALSE CEILING ( Gypboard)

Providing and fixing Gypsum false ceiling as per India Gypsum specification for

ceiling with drops as per drawing including of providing and fixing G.I. Frame work as

per specification of India gypsum at a distance of 2'0" c/c both ways complete with

12.5mm board (IS-2095-1982) and all necessary perimeter channels etc. No extra

payment will be made for the cutting of light points , stain glass,cove lighting etc. The

measurement will be taken in one level , rate should include the drops also, no extra

amount will be paid for the drops. The joints to be properly mended with paper tapes

and gypsum compound all complete. The rate should include the full completion of

the ceiling. At the time of handing over the site all necessary repairing work to be

considered if required. The work to be completed as per specification ,design and

approval of the Architect.No Drop or design(if any )will be considered as extra

measurement it will be considered flat ceiling.Rate is inclusive of two coats primer

and two coats of Acrylic emulsion paint. SFT

2 PARTITION

Providing and fixing in position partition with 2"x2" finished sal wood section without

saps and joints at maximum 2'-0"C/C both ways horizontally and vertically treated

with Pentapehene pale from STP as antitermite & fire retardent from Viper to be fixed

screwed to the floor and ceiling with M.S.Cleats. The frame work will be claded with

6mm thk. BWR plywood both sides and finished with 1.0mm thk. approved shade

laminate as per design with approved adhesive.3"x1/2" white beach /white ceader

skirting with natural polish to be fixed along with the entire bottom length of partition

on both sides.Extra frame work to be fixed for fixing glass. In the glazed partition

8mm thk. Etched/Frosted glass with sand blusting/granular blasting to be provided

fixed with white beach/ white ceader moulding with natural polished 37.5mmx25mm

all complete.For the door 32mm solid core flush door with necessary hold fast fixed

to the wall /partition with 1.0mm thk. laminate (approved shade).1 1/2"x1 1/2"white

beach/white ceader moulding to be provided along the periferi of the door frame.

The work to be completed as per design,specification and approval of the Architect.

(a) PARTLY GLAZED PARTITION WITH DOOR

(i) Full Ht. Partly Glazed Partition Upton 8'-0" SFT

(ii) Low Ht. Partly Glazed Partition Upto 4'-0" & 6'-0". SFT

(b) BLOCKED PARTITION

(i) Full Blocked Partition Upto 8'-0" SFT

(c) TOUGHEND GLASS PARTITION

Providing and fixing in position 10mm thk toughened glass at top of teller counter

front.The work to be completed in all respect as per design , direction and approval

of Architect. SFT

BOQ Of State Bank of Mysore, Behala, Kolkata

Page 1


2/8

3 Door AccessoriesSupplying and fixing door accessories as door closure,door stoper,Floor

spring(heavy duty), hinges, locks and handle etc.The above items to be approved by

Architect

(a) PARTLY GLAZED DOOR

(i) Partly glazed door with etching & frosting (7'-0"x3'-0") NOS

(ii) Partly glazed door with out etching & frosting (7'-0"x3'-0") NOS

(iii) Low ht. Glazed door.(6'-0"x2'-6") NOS

(b) BLOCKED DOOR

(i) Full ht. Blocked door with vision panel (7'-0"x3'-0") NOS

(ii) Full ht. Blocked door without vision panel (7'-0"x3'-0") NOS

(c) MAIN ENTRANCE DOOR (3'-6"x7'-0")

Providing & fixing fully glazed pivoted door at the main entrance consists of

6"x2"seasoned hard wood section covering with white beach/white ceader beading

for bottom rail and 4"x2" seasoned hard wood section covering with white

beach/white ceader beading for top rail finished with natural polish. 12mm thk.Modi

Guard /Saint Gobain clear float glass with sand blasting/etching (as per design) and

finish handle(1'-0" long)of Neki/Hasseley make to be faxed on both sides & proper

locking arrangement in bottom rail to be done. The rate should include

lipping,moulding,beading & heavy duty floorspring.The work to be completed in all

respect as per design, direction and approval of the architect. NO

4 TABLE

Providing and fixing tables made out of 19mm thk BWR block board for top,sidis and

front of approved make cladded with 1.0mm laminate as per design in all visible

areas. All the exposed edges to be covered with white beach/white ceader wooden

lippings and mouldings with natural polish. The drawers to be made out of 19mm thk

block board for the front ,sides to be made out of 12mm BWR plywood and bottom to

be made out of 6mm BWR plywood and it should play in drawer sliding channels.

The inside of the drawer and the table to be ename painted (approved colour) . A

legrest to be provided duly polished made out of 19mm thk BWR plywood. A shutter

to be made by 19mm bwr Block board cladded with 1.0mm laminate .The necessary

locks,hinges, handles to be provided in each drawers and shutters.3" x 1/2" white

beach/White ceader wooden skiritng to be provided in all visible areas duly

polished.On top of the Chief managers/Br. Manager table 10mm thk glass to be

placed duly edge polished.The table should have black powder coated ready made

key board tray and tea traywith laminate finish.The necessary wire managers to be

provided on the tables and provision for lights to be kept if required in the front of the

table.

Ready made CPU trolly to be provided every where with a provision of castors to be

provided. 1.0mm laminate of approved colour and bruss steel laminate to be fixed asper design including the raised level.All the inside areas to be duly enamel

painted.For Spl. Asst. Table should have 19mm thk. granite(approved colour)with

bull nosed at front facia.1'-0"high 10mm thk.machine polished clear glass to be

provided at top of table front.The work to be completed as per design and approval

of the Architect.

Page 2


3/8

(a) Br. Manager (6'-0"x2'-6") NO

(b) Officers/ staffs (4'-6"x2'-6") NOS(c) Spl. Asst. (4'-9"x2'-6") NOS

6 WORKSTATION:

Providing & fixing top, front & sides of workstation made out of 19mm thk. BWR

block board and 6mm BWR ply for back as per design cladded with 1.0mm thk.

Laminate & the all exposed edges to be finished with white beach/white ceader

moulding ( as per design), l ipping with natural polish.The work station should have

individual pedestral unit having drawer & shutter pallah.The front of the drawer made

out of 19mm thk.BWP block board finished with 1.0mm thmk. laminate, sides 12mm

thk. BWP ply and bottom to be made out of 6mm plywood. The inside and sides of

the drawer to be enamel painted. The drawers and shutters to be provided with

necessary drawer sliding channels , handles,hinges,locks etc.A leg rest to be

provided made out of 19mm thk. BWP block board duly enamel painted. Inside of the

workstation to be enamel painted in the matching tone.Wire manager (approved

colour),Readymade black powder coated CPU trolly,Key board tray , Mouse pad tray

finished with 1.0mm laminate to be provided.The work should be completed as perspecification and approval of Architects.

RFT

7 CASH COUNTER / SW (4'-9"x2'-6") HT. 3'-8"

Providing and fixing top, front & sides of cash counter made out of 19mm BWR block

board as per design cladded with 1.0mm thk laminate & the edges to be finished with

necessary white beach or white ceader lippings, mouldings(as per design), etc.

Special 6" drawer to be made for the cash with dividers of 12mm BWR plywood The

front of the drawer made out of 19mm BWR block board finished with 1.0mm

laminate, sides 12mm BWR plywood and bottom to be made of 6mm BWr plywood .

The inside and sides of the drawer to be enamel painted .The drawers and shutters

to be provided with necessary drawer sliding channels,handles, hinges, locks etc. A

leg rest to be provided made out of 19mm thk BWR block board duly enamel

painted. Inside of the unit to be enamel painted in the matching tone.All visible areas

to be coverd with white beach or white ceader lippings, mouldings with natural

polish.Wire manager, legrest,Redymade black powder coated CPU trolly, keyboardtray, tea tray finished with 1.0mm laminate to be provided. 3" x 1/2" white beach

white ceader skiriting to be provided with natural polish in all visible areas.19mm thk

Jet Black Granite with bullnosed moulding (double)

to be provided at counter top at 3' 8" lvl. the work should be completed as per

specification. The work to be completed as per specification ,design and approval of

the Architect.RFT

8 Side and Back Unit

Page 3


4/8

Providing and fixing Side Unit/ Back unit made out of 19mm BWR block board fortop, sides,front and 6mm BWR ply for back finished with 1.0mm laminate in all

exposed areas . The drawers to be made out of 19mm BWR block board in the front

cladded with 1.0mm laminate. sides to be made out of 12mm plywood and bottom

made out of 6mm plywood duly enamel painted in matching tone and i t should play

on drawer sliding channels . The Sliding shutters to be made out of 19mm block

board with 1.0mm laminate finished and should play on channels all four sides. The

necessary locks,hinges , handle etc to be provided . 3" x1/2" white beach/White

ceader wooden skiritng with natural polish to be provided as per matching tone all

along the visible areas . Inside of the unit to be enamel painted in matching tone . All

the exposed edeges of the boards/plywoods to be coverd with White beach/White

ceader lippings/mouldings with natural polished all complete.The work to be

completed as per approval and specificaion of the Architect. SFT

9 Writing Ledge

Providing and fixing writing ledge as per design made out 19mm block board with

necessary groove patterns ,1.0mm laminate to be cladded. 10mm thk bevelled glass

to be provided on top of the writing ledge.A divider made of 19mm thk.block board to

be provided. Whit beach/ White ceader lipping with natural polish to be used in all

exposed areas. Inside of writing ledge to be enamel painted.The work to be

completed as per design and approval of the architect. NO

10 Planter Box

Providing and fixing Planter Box made out of 19mm block board finished with 1.0mm

laminate as per design with a 3"x 1/2" White beach / White ceader wooden skirting

with natural polish. inside to be enamel painted .All exposed edges to be covered

with white beach/ White ceader moulding with natural polish.The work to be

completed as per design and approval of Architect. NOS

11 STORAGE

Providing and fixing storage made out of 19mm bwp block board for top,sides&

6mm BWP ply for back finished with 1.0mm laminate . The shutters to be made out

of 19mm block board with 1.0mm laminate. The necessary locks , handles, hinges

etc to be provided . 3" x1/2" white beach/White ceader wooden skiritng to be

provided duly natural polished as per matching tone. Inside of the unit to be enamel

painted in matching tone . All the exposed edeges of the boards/plywoods to be

coverd with white beach/white ceader wooden lippings/mouldings duly natural

polished all complete.For full ht. storage file divider made out of 6mm thk ply to be

provided.1.0mm thk. bruss steel laminate to be provided as per design on pallah.The

work to be completed as per approval and specificaion of the Architect.

(a) Full ht storage 7'0'' SFT

(b) Low ht storage 2'6'' SFT

12 VERTICAL BLINDS

Page 4


5/8

Providing and fixing vertical blinds of 100mm thk (Mac/Annums) of approved shadeand pattern having handrail made of high strength alluminium alloyed wall thickness

of 1.2mm thk. Headrail to have 25mm decorative insert. Control unit shall be ofderlin.

The runners are also to be a derlin with antiflixtion adeshive. Spacers should be

made of stainless steel. Fabric should be polyester viscosted/polyester yarn having

protective coating with chemicals for stain resistance & soil repalancy. The rate shall

include necessary scoch gurd treatment on both sides. The overlaping should be

uniform and adequate.Necessary operative arrangements,frames to be provided.

The work to be completed as per specification and approval of the architect. SFT

13 SYNTHETIC DOOR MAT

Providing and fixing synthetic door mats of approved shade from Birla 3M( 6mm

thk).The work to be completed as per approval of the Architect. NOS

14 SOFT BOARD / NOTICE BOARD

Providing and fixing soft board /Notice board fabricated out of 12mm BWP ply

covered with 12mm soft board padding and upholsply propylene fabric @ 80/mtr.

Edges of soft board should have white beach/whiteceader moulding with natural

polished. SFT

Note: Where pin up board is in a panelled area, the top of the pin up board should

be flushed with the panel, keeping the same level. The work should be completed as

per specification,design&approval of the Architects.

15 Lunch Counter

Providing and fixing in position Lunch counter fabricated out of 19 mm thick

BWP solid ply finished with 1.0mm thk. Laminates on top & sides.The

necessary white beach/white cedar moulding/lipping with natural polish and

necessary hardware shall be provided as per design.The work is to be

completed in all respects as per design,design and approval of the achitect. RFT

16 PAINTING

(a)

Providing and applying Acrylic emulsion/OBD paints after removing the damaged

plaster , replastering with 12mm thk cement morter after finishing with P.O.P to make

the necessary smoothness , reparing all damages . Then two coats of Primer of

approved make to be applied finished with two or more coats of acrylic emulsion

paints .The work to be completed as per approval and satisfaction of the Architect. SFT

(b) TEXTURE PAINT

Providing , spraying and applying Texture pain of approved shade and colour on

walls and coloumns.The job is inclusive of scaping,leveling and preparing the

surface.Bi colour texture paint will be used. The wall surface has to duly prepared by

removing the damaged plaster and applying P.O.P to give a smooth surface as per

approval of the Architect. SFT

(c)

SYNTHETIC ENAMEL PAINT FOR WINDOW GRILL, ROLLING SHUTTER &

COLLAPSEABLE GATE

Page 5


6/8

Providing and applying 2 coats synthetic enamel paint on window grill,rolling shutter

and collapsiple gate.Before putting final paint scrapping,leveling,preparing thesurface and 2 coats primer to be done.The wall to be completed as per the direction

of architect. SFT

(d) OIKAS

Providing , spraying and applying Oikas paint of approved shade and colour on walls

and coloumns.The job is inclusive of scaping,leveling and preparing the surface.Bi

colour paint will be used. The wall surface has to duly prepared by removing the

damaged plaster and applying P.O.P to give a smooth surface as per approval of the

Architect. SFT

17 SOFA

Providing and placing in position sofa made of 2"x2" hard wood section and 19mm

BWP block board for bottom,spring jute cloth,coir,8"cotton HDF,4"loose

foam,upholstery @RS.120 per mt.all complete as per drawing.3/4"x3/4" ss finish

square shape pipe to be used as legs & other areas as shown in drawing.The work

to be completed as per approval & direction of the architect. SEATS

18 SOFA SIDE TABLE, CENTRE TABLE

Providing and fixing center table fabricated out of 12mm thk. Bevelled glass on

top,3/4"dia ss stud,19mm thk. Block board finished with 1.0mm thk laminate for all

four sides and base.Bruss steel laminate to be used as per drawing.10mm thk.

Machine polished glass to be used as a shelves.The work to be completed in all

respect as per the direction of architect. NOS

19 CORNICE MOULDINGProviding and fixing pop cornice moulding along the periferi wherever the walls/

partition meeting the ceiling size 3" x 1 1/2" duly painted as per approval of the

architect. RFT

20 Plants ( artificial )

Providing and placing artificial plants & Creepers of approved colour to be provided

wherever required. The work to be completed as per approval of the Architect and

provision to be made to fix it . SETS

21 Suggestion Box

Providing and fixing suggestion box made out of 19mm block board and finished with

1.0mm thk laminate & inside to be synthetic enamel painted.A 1" high slit & small

door with key and locking arrangement to be done for dropping & taking out the

slips.The work to be completed as per design,direction & approval of the architect. NO

22 Cheque Deposit Box

Providing and fixing cheque deposit box made out of 19mm thk block board &

finished with 1.0mm thk. Laminate & inside to be synthetic enamel painted.a 1" highslit & small door with key and locking arrangement to be done for dropping & taking

out the slips.The work to be completed as per the design,direction & approval of the

architect. NO

23 First Aid Box

Page 6


7/8

Providing & fixing in position first aid box made out of 19mm thk. BWP block boardfinished with 1.0mm thk. Laminate.Inside to be enamel painted.all exposed edges to

be covered with white beach/white cedar lipping with natural polish.Necessary

hardware like multipurpose lock,box hinges and handle to be provided.The work to

be completed as per the direction & approval of the architect. NO

24 Brass Plaque with lettering

Providing & fixing in position brass plaque with lettering of Bank's name, work

timings& any other details deemed necessary by them. The item to be completed in

all respect as per the direction of the Architects. NO

25 PVC Flooring

Providing and laying 2mm thk. PVC flooring in UPS/Server and strong room of

approved colour on the existing floor with adhessive. The floor should be

clean,smooth,level,dry and free from oil, The item to be completed in all respects as

per design, direction and approval of the Architect. SFT

26 PILLAR CLADDING

Providing & fixing in position column cladding consisting of 6mm BWP

plywood,1.0mm thk. laminate with hardwood ribbing of 1 1/2"x 1" dimension. The rest

of the column is to be texture/ heritage painted.Texture/Heritage paint area as shown

in drawings.The item is to be completed in all respects as per design,direction &

approval of the architect.The rate is inclusive of dismantling,removal of existing pillar

cladding and disposal from site to municipal dumping ground. SFT

27 ROLLING SHUTTER ENCASEMENT

Providing and fixing in position rolling shutter encasement fabricated out of 19mm

thk. BWP BB finished with 1.0mm thk. laminate for top,sides, front and bottom with

necessary openable pallah at bottom, hardware including locks, hinges & handles.

The job to be completed as per approval of the Architect. SFT

28 Main Panel Encasement

Providing & Fixing main panel encasement in position fabricated out of 19mm BWP

BB with 1.0mm thk. Laminate for top,both sides&front.Encasement will be having

louver & 6mm thk. Glass for seeing the indicator in both pallahs.The exposed surface

of 19mm BWP BB will be finished with white beach/white ceader lipping & inside to

be enamel painted . The item to be completed in all respect as per design , direction

and approval of the Architects. SFT

29 Window Blocking with ply

Providing and fixing 19mm BWP BB for existing window blocking wherever required

with paint finished. The work to be completed in all respect as direction and approval

of the Architects. SFT

TOTAL

C CIVIL WORK

Page 7


8/8

SL PARTICULARS UNIT

NO.

1 IPS Flooring

Providing and laying cement concrete flooring 40mm thk. M-15,C.M laid to

proper level and slope in alternate bays including compaction filling joints

marking lines to give the appearance of tiles 30cm x30cm laid diagonally or

square finishing smooth ( with extra cement) in any colour as directed by SFT

Architect and curing complete in all respect.

2 PCC

P/E PCC OF grade 1:2:4 of desired thickness including shuttering if required.

The thk. may vary from 4" to 6" as per requirement. SFT

3 Treds & Riser of Steps

Providing and laying in required position granite slab of 25mm thk. Upto 6'-0"

in length (single piece) approved shade and colour as per design and patternwith machine cut and machine polish in CM 1:3 for treads/ risers of steps.

The rate is inclusive of full rounded nosing for treads and 3nos groove on treads SFT

complete in all respect. Basic rate of granite Rs/- 130/sft

TOTAL

Part - D Bought out items

Chairs

i High Back with arms (DX - 718) Nos

ii Medium Back with arms ( DX - 725) Nos

iii Medium Back without arms ( DX - 722) Nos

iv Low Back without arms ( DX - 722) Nos

v Stool for pantry Nos

TOTAL

Page 8

Documents

Interior Boq