2
Intensiv SA 6926 Montagnola Switzerland Tel. +41 91 986 50 50 Fax +41 91 986 50 59 [email protected] www.intensiv.ch Clinically tested by the University of Zurich, Switzerland Intensiv ProxoContour The only in two grit sizes one sided diamond- coated metal strip with ergonomic handles for contouring and finishing of proximal aesthetic restoration surfaces New! Benefits Efficient manual contouring of the proximal filling morphology Finishing of the roughened surfaces in one process Short strip for improved finger support during treatment No injury risk of soft tissue (lip cutting) Sterilizable, reusable Intensiv ProxoContour metal strip with one sided diamond-coated grit sizes: 60 μm (brown) for contouring and 40 μm (red) for finishing. The 2.5 mm height of the strip allows the secure stripping below the contact point. The diamond-free zone between the diamond coated surfaces provides a non-destructive contact zone passage. Indications Contouring and finishing of aethetic tooth fillings in the proximal area Removal of excess material and contour on proximal restoration surfaces Pat. 699 819 μm 60 40 1:1 P135E Pack of 6 strips Ref. PXC6040/6 Clinical pictures: Dr. Simona Giani, Varese, Italy

intensiv_proxocontour_flyer_e

Embed Size (px)

DESCRIPTION

intensiv_proxocontour_flyer_e

Citation preview

Intensiv SA6926 MontagnolaSwitzerland

Tel. +41 91 986 50 50Fax +41 91 986 50 [email protected]

Clinically tested by the University of Zurich, Switzerland

Intensiv ProxoContour

The only in two grit sizes one sided diamond-coated metal strip with ergonomic handles for contouring and finishing of proximal aestheticrestoration surfaces

New!

Benefits

■ Efficient manual contouring of the proximal filling morphology

■ Finishing of the roughened surfaces in one process

■ Short strip for improved finger support during treatment

■ No injury risk of soft tissue (lip cutting)

■ Sterilizable, reusable

Intensiv ProxoContour metal strip with one sided diamond-coated grit sizes: 60 µm (brown)

for contouring and 40 µm (red) for finishing.

The 2.5 mm height of the strip allows the secure stripping below the contact point.

The diamond-free zone between the diamond coated surfaces provides a non-destructive

contact zone passage.

Indications

■ Contouring and finishing of aethetic tooth fillings in the proximal area

■ Removal of excess material and contour on proximal restoration surfaces

Pat. 699 819

µm 60 40

1:1

P135

E

Pack of 6 strips Ref. PXC6040/6

Clinical pictures: Dr. Simona Giani, Varese, Italy