Embed Size (px)
Citation preview
Intelligent Integration
TPP SYSTM ONE – CARDIOSOFT USB
CLICK HERE TO START THIS PRESENTATION
Step By Step Guide1. Open the patient record in TPP
Systm One.
2. Double click the I3 icon located on the desktop. Note: This will start the I3 software.
3. Move on to the next slide.
Step By Step Guide1. Click the Start button.
2. Move on to the next slide.
Additional Information
Click the User Manual button or here to see an up to date version of the I3 user manual.
Step By Step Guide1. Select the product GE-CAM USB
from the product list.
2. Click the Start button.
3. Move on to the next slide.
Step By Step Guide1. Check the patient details are
correct then click the Yes button. Note: This will launch the Cardiosoft software.
2. Move on to the next slide.
Step By Step Guide1. Check that the electrodes are
sufficiently connected to the patient. To check your electrode connection quality use the connectivity guide shown on screen.
Green – Indicates good connectivity with the patient
Yellow – Indicates a lead problem (high impedance)
Red – Indicates that the electrode is disconnected from the patient
2. Click the ECG Acquisition button or button one on the device to acquire the ECG.
3. Click the Post Test Review button. Note: This will open the test summary screen.
4. Move on to the next slide.
Step By Step Guide1. Close the Cardiosoft software
using the red X symbol in the top right hand corner.
2. Move on to the next slide.
Additional Information
The results can be printed at this stage by clicking the Print button from the right hand menu bar.
Step By Step Guide1. Enter any required comments in
to the comments box.
2. Click the OK button.
3. Move on to the next slide.
Step By Step Guide1. Click the OK button on the
confirmation message.
2. Move on to the next slide.
Step By Step GuideThe ECG report is now filed in to TPP
Systm One in new journal.
1. To view the ECG report – right click on it then select View In Windows.
2. Move on to the next slide.
Additional Information
To view the report the computer will need Adobe Reader installed. This can be obtained from www.adobe.com
Step By Step GuideThe ECG report will contain the
patient information, a breakdown of the measurements & the system interpretation.
Additional Information
The ECG report can be printed at this point or saved on to the PC and e-mailed.
Move on to the next slide.
Useful InformationIf you have any problems with your I3 Software or require any additional support/training please contact: Technical Support Contact: 0114 399 0010 E-mail: [email protected]
Training Contact: 0114 243 3896 E-mail: [email protected]
