>intelligent cellular 2G/3G/4G terminals with “last gasp” for use in NES metering<

This product family of 2G/3G/4G wireless modems is desig-ned for use with the NES concentrators. For a PLC solution with DC1000/DCN3000, the modem is housed inside the concentrator. The kit part numbers include needed cables for power and communication between the ETM-Purple2 and DC1000/DCN3000.

› Designed for the NES DC1000/ DCN3000 concentrator with USB or RS232 interface

› Power failure alarm (”last gasp”) with super capacitor technology

› ETM Web Office (EWO) support.

› Maximize network coverage with support for 2G, 3G and 4G

› Compact size to fit inside the concentra-tor

ETM-Purple2

ETM Mätteknik ABBox 11096, Ekbacksvägen 32,

SE-161 11 Bromma, Sweden

Tel: +46 (8) 25 28 75 E-mail: sales@etm.se, www.etm.se

ETM Pacific Pty LtdSuite 6, 273 Alfred Street, North Sydney NSW 2060, Australia

Tel: +61 (0)2 9956 7377 E-mail: info@etmpacific.com.au, www.etmpacific.com.au

www.connectingthings.com

ETM-Purple2 2G/3G/4GThe ETM-Purple2 is based on the firmware and hardware platform of the ETM line of terminals that is widely used in the utility industry. In addition the units can provide power failure alarms (“last gasp”) by utilizing super capacitors to allow operation after a power failure. With the EWO support, parameters like signal strength, Lac, cell, temperatures etc. can be remotely monitored via a powerful WEB based interface.

Model: ETM-Purple2 4G, DC1000/DCN3000 kit

Part number: 71358 EU, DC1000 kit 71359 EU, Last Gasp, DC1000 kit 71360 US, DC1000 kit 71361 US, Last Gasp, DC1000 kit 71362 EU, DCN3000 kit 71363 US, DCN3000 kit

RS232: Box head connector

Power: RJ12

USB: USB 2.0 and power over USB (12 V setting on the DCN3000)

Module: Cinterion ELS6-E for EU variants and ELS6-US for US variants

EWO support: Yes

Frequency 2G: EU: 900/1800 MHz US: Not supported

Frequency 3G: EU: Not supported US: 850/AWS/1900 MHz

Frequency 4G: EU: 800/900/1800/2100 MHz US: 700/850/AWS/1900 MHz

Data transmission:

- LTE DL: max. 10.2 Mbit/s, UL: max. 5.2 Mbit/s,

- HSDPA EU: No US: DL: max 7.2 Mbit/s , UL: max 5.7 Mbit/s

- EDGE EU: Yes US: No

- GPRS EU: Yes US: No

- SMS Yes

- TCP/IP Yes

- Java Yes

Dimensions: 72x52x23 mm

Weight: 67 g

Power consumption: 400 mA (rated), <250mA (transmitting), <35mA (idle), <0.7mA (sleep)

Operating temp: -30°C to +70°C

Antenna: 2 x FME M connectors

DCN1000 kit: includes serial cable, power cable and gland.

DCN3000 kit: includes USB cable and antenna cable with rubber grommet

- Last gasp are only valid for part numbers 71359 and 71361 - The EWO support (ETM Web Office) make it possible to remotely monitor the quality of service. Parameters like signal strenght, cell, LAC etc are automaticly sent to EWO at a regular basis.

Your chosen wireless carrier or infrastructure may not offer support for all described functionality - please contact us for technical qualification.

› Power failure alarm

› Status and signal strength LED

› Watchdog

› Remote upgrade ofconfigurationand software

› EWO support

› 2G, 3G and 4G support depending on region