InteleStation Laminate - Open Style Cubicle€¦ · InteleStation® Laminate - Enclosed Style Cubicle SPECIFICATIONS Model chemical emissions to UL 2818. UL.COM/GG.CUBE36LE Dimensions

InteleStation® Laminate - Open Style CubicleSPECIFICATIONS

Model CUBE36LB DimensionsWidth 98 cmDepth 122 cmHeight 148 cmWeight 134 kg

Norix Group, Inc. 1800 W. Hawthorne Lane, Suite NWest Chicago, Illinois 60185Phone: 630-231-1331Toll Free: 800-234-4900Fax: 630-231-4343Email: [email protected]©2016 Norix Group, Inc.

Specifications subject to change without notice. ©2016 Norix Group, Inc. All Rights Reserved. Printed in U.S.A. 12/16

Fabrication & MaterialBolt together.Sides & Writing Surface: High-pressure laminate bonded to 20 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20 kg density particle board.Face Plate: 14 gauge black powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Face Plate and Top Access Panel: Black powder coat.AssemblyAssembly required. Refer to manufacturers instructionsInstallationSet in place after assembly.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Face Plate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.

InteleStation® Laminate - Enclosed Style CubicleSPECIFICATIONS

Model CUBE36LE DimensionsWidth 98 cmDepth 122 cmHeight 148 cmWeight 134 kg



Fabrication & MaterialBolt together.Sides & Writing Surface: High-pressure laminate bonded to 20 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20 kg density particle board.Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Face Plate and Top Access Panel: Black powder coat.OptionsFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationSet in place after assembly.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Face Plate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.

InteleStation® Laminate - Open Style CubicleSPECIFICATIONS

Model CUBE60LB DimensionsWidth 159 cmDepth 122 cmHeight 148 cmWeight 173 kg



Fabrication & MaterialBolt together.Sides & Writing Surface: High-pressure laminate bonded to 20 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20 kg density particle board.Face Plate: 14 gauge black powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Face Plate and Top Access Panel: Black powder coat.AssemblyAssembly required. Refer to manufacturers instructionsInstallationSet in place after assembly.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Face Plate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.

InteleStation® Laminate - Enclosed Style CubicleSPECIFICATIONS

Model CUBE60LE DimensionsWidth 159 cmDepth 122 cmHeight 148 cmWeight 173 kg



Fabrication & MaterialBolt together.Sides & Writing Surface: High-pressure laminate bonded to 20 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20 kg density particle board.Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Face Plate and Top Access Panel: Black powder coat.OptionsFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationSet in place after assembly.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Face Plate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.

InteleStation® Laminate - Open Style Cabinet - Floor MountSPECIFICATIONS

Model LBF0N1DimensionsWidth 77.5 cmDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs: Fully welded steel tubes. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Face Plate: 14 gauge black powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs and Face Plate: Black powder coat.Vinyl Edge: Black.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Faceplate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LBF0N2DimensionsWidth 1.52 mDepth 38 cmOverall Height 1.44 m





Model LBF0N3DimensionsWidth 2.27 mDepth 38 cmOverall Height 1.44 m





Model LBF0S1 DimensionsSeat Height 49 cmWidth 77.5 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15 cm x 15 cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Face Plate: 14 gauge black powder coated steel.Seats: Option 1: Super Slammer Stone – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish. Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs and Face Plate: Black powder coat.Vinyl Edge: Black.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LBF0S2 DimensionsSeat Height 49 cmWidth 1.52 mOverall Height 1.44 m





Model LBF0S3DimensionsSeat Height 49 cmWidth 2.27 mOverall Height 1.44 m




InteleStation® Laminate - Open Style Cabinet - Back to BackSPECIFICATIONS

Model LBK0N2DimensionsWidth 77.5 cmDepth 76 cmOverall Height 1.44 m




28" 28" 28" 28" 28" 28"

28" 28" 28" 28" 28" 28"

30 1/2" 89 1/2"60"

30 1/2" 89 1/2"60"

30"

30"


Model LBK0N4DimensionsWidth 1.52 mDepth 76 cmOverall Height 1.44 m




28" 28" 28" 28" 28" 28"

28" 28" 28" 28" 28" 28"

30 1/2" 89 1/2"60"

30 1/2" 89 1/2"60"

30"

30"


Model LBK0N6DimensionsWidth 2.27 mDepth 76 cmOverall Height 1.44 m





Model LBK0S2DimensionsSeat Height 49 cmWidth 77.5 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15 cm x 15 cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Face Plate: 14 gauge black powder coated steel.Seats: Option 1: Super Slammer Stone – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish. Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs and Face Plate: Black powder coat.Vinyl Edge: Black.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Faceplate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LBK0S4DimensionsSeat Height 49 cmWidth 1.52 mOverall Height 1.44 m





Model LBK0S6DimensionsSeat Height 49 cmWidth 2.27 mOverall Height 1.44 m




InteleStation® Laminate - Open Style Cabinet - Wall MountSPECIFICATIONS

Model LBW0N1 DimensionsWidth 77.5 cmDepth 38 cm



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Wall-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Face Plate: 14 gauge black powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Face Plate: Black powder coat.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach wall-mount unit to wall using furnished mounting brackets. Anchors or bolts not included.Warranty10 year limited replacement warrantyMaintenance For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Faceplate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LBW0N2 DimensionsWidth 1.52 mDepth 38 cm





Model LBW0N3 DimensionsWidth 2.27 mDepth 38 cm





Model LBW0S1 DimensionsSeat Height 49 cmWidth 77.5 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Wall-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts.Writing Surface: Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs and Seat Support: 25 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15 cm x 15 cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. Sides & Face Plate: 14 gauge black powder coated steel.Legs: 7.5 cm diameter 14 gauge steel finished with black powder coat paint. Seats: Option 1: Super Slammer Stone – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs and Face Plate: Black powder coat.Vinyl Edge: Black.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach wall-mount unit to wall using furnished mounting brackets. Anchors or bolts not included. Anchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Faceplate: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LBW0S2 DimensionsSeat Height 49 cmWidth 1.52 mOverall Height 1.44 m





Model LBW0S3 DimensionsSeat Height 49 cmWidth 2.27 mOverall Height 1.44 m




InteleStation® Laminate - Enclosed Style Cabinet - Floor MountSPECIFICATIONS

Model LEF0N1DimensionsWidth 77 cmDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs: Fully welded steel tubes. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs, Face Plate and Top Access Panel: Black powder coat.Vinyl Edge: Black.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Steel Enclosure: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LEF0N2DimensionsWidth 1.52 mDepth 38 cmOverall Height 1.44 m





Model LEF0N3DimensionsWidth 2.27 mDepth 38 cmOverall Height 1.44 m




InteleStation® Laminate - Enclosed Style Cabinet - Floor Mount SPECIFICATIONS

Model LEF0S1DimensionsSeat Height 49 cmWidth 77 cmDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Seats: Option 1: Super Slammer Stone® – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Legs, Face Plate and Top Access Panel: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Seat Support: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LEF0S2DimensionsSeat Height 49 cmWidth 1.52 mDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Seats: Option 1: Super Slammer Stone® – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Legs, Face Plate and Top Access Panel: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Seat Support: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LEF0S3DimensionsSeat Height 49 cmWidth 2.27 mDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Seats: Option 1: Super Slammer Stone® – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Legs, Face Plate and Top Access Panel: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. SLegs and Seat Support: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Laminate - Enclosed Style Cabinet - Back to BackSPECIFICATIONS

Model LEK0N2DimensionsWidth 77 cmDepth 76 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs: Fully welded steel tubes. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Legs, Face plate and top access panel: Black powder coat.Vinyl edge: Black.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs, Face Plate and Top Access Panel: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LEK0N4DimensionsWidth 1.52 mDepth 76 cmOverall Height 1.44 m





Model LEK0N6DimensionsWidth 2.27 mDepth 76 cmOverall Height 1.44 m





Model LEK0S2DimensionsSeat Height 49 cmWidth 77 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Floor-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Seats: Option 1: Super Slammer Stone – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Legs, Face Plate and Top Access Panel: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Legs and Seat Support: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LEK0S4DimensionsSeat Height 49 cmWidth 1.52 mOverall Height 1.44 m





Model LEK0S6DimensionsSeat Height 49 cmWidth 2.27 mOverall Height 1.44 m




InteleStation® Laminate - Enclosed Style Cabinet - Wall MountSPECIFICATIONS

Model LEW0N1DimensionsWidth 77 cmDepth 38 cmHeight 56 cm



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Wall-mount. Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board. T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistant laminate on 20.5 kg density particle board. Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finishVinyl Edge: BlackFace Plate and Top Access Panel: Black powder coatOptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach wall-mount unit to wall using furnished mounting brackets. Anchors or bolts not included.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Face Plate and Top Access Panel: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.


Model LEW0N2DimensionsWidth 1.52 mDepth 38 cmHeight 56 cm





Model LEW0N3DimensionsWidth 2.27 mDepth 38 cmHeight 56 cm





Model LEW0S1DimensionsSeat Height 49 cmWidth 77 cmDepth 38 cmOverall Height 1.44 m



Fabrication & MaterialBolt together with tamper-resistant mechanical fasteners (supplied). Wall-mount.Sides & Writing Surface: High-pressure laminate bonded to 20.5 kg density particle board.T-mold vinyl edges are glued around circumference for tamper-resistance and security. Panels connect with internal barrel bolts. Heavy-duty graffiti resistantlaminate on 20.5 kg densityparticle board.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the vertical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63cm thick steel plates. The bottoms of the seat tubes are fully enclosed to conceal floor-mounting anchors. Top & Face Plate: 14 gauge black powder coated steel attached with security fasteners. Monitor cut out includes 1 cm thick protective polycarbonate screen.Legs: 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Seats: Option 1: Super Slammer Stone – 33 cm diameter high-density color impregnated compression molded composite that is highly scratch and stain resistant. Option 2: Stainless Steel – 14 gauge, type 304. One-piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSides & Writing Surface: Wilsonart Ebony Star 4552-90 textured Crystal finish.Vinyl Edge: Black.Legs, Face Plate and Top Access Panel: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless Steel.OptionsFace plate cut out configuration can be customized to individual applicationAssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach wall-mount unit to wall using furnished mounting brackets. Anchors or bolts not included. Anchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Laminate Cabinet: For wood products, Norix recommends using a mild wood cleaner for routine and regular cleaning maintenance. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of a regular-strength wood cleaner. Top, Face Plate and Legs: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.


Model LEW0S2DimensionsSeat Height 49 cmWidth 1.52 mDepth 38 cmOverall Height 1.44 m





Model LEW0S3DimensionsSeat Height 49 cmWidth 2.27 mDepth 38 cmOverall Height 1.44 m




InteleStation® Stainless Steel - Open Style Cabinet - Floor MountSPECIFICATIONS

Model SBF7SDimensionsSeat Height 49 cmWidth 77 cmDepth 75 cmOverall Height 1.5 mWeight 52.6 kg



Fabrication & MaterialSurface Mount Panel, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasteners. Writing surface, divider panels, cabinet top and face plate are securely con-nected with tamper resistant fasteners. Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SBF9SAssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach furnished mounting bracket to wall and hang wall-mount unit on bracket. Anchors or bolts not included. Anchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Panels, Legs, Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Seat: For routine and regular cleaning mainte-nance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Stainless Steel - Open Style Cabinet - Back to BackSPECIFICATIONS

Model SBK7NDimensionsWidth 77 cmDepth 68.5 cmOverall Height 1.5 mWeight 93 kg



Fabrication & MaterialSurface Mount Panel, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasteners. Writing surface, divider panels, cabinet top and face plate are securely con-nected with tamper resistant fasteners. Legs: Fully welded steel tubes. 7.5 cm diameter 14 gauge steel finished with black powder coat paint.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.OptionsAdd on unit model SBK9NAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Panels, Legs, and Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products.

InteleStation® Stainless Steel - Open Style Cabinet - Back to BackSPECIFICATIONS

Model SBK7SDimensionsSeat Height 49 cmWidth 77 cmDepth 1.5 mOverall Height 1.5 mWeight 102 kg



Fabrication & MaterialSurface Mount Panel, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasteners. Writing surface, divider panels, cabinet top and face plate are securely con-nected with tamper resistant fasteners. Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SBK9SAssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure and Legs: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Stainless Steel - Open Style Cabinet - Wall MountSPECIFICATIONS

Model SBW7NDimensionsWidth 77 cmDepth 34 cmOverall Height 71 cmWeight 43 kg



Fabrication & MaterialSurface Mount Panel, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasteners. Writing surface, divider panels, cabinet top and face plate are securely con-nected with tamper resistant fasteners. Wall Mount Brackets: 0.63 cm powder coated steel.Wall Hanger: 10 ga. powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.OptionsAdd on unit model SBW9NAssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach furnished mounting bracket to wall and hang wall-mount unit on bracket. Secure unit to wall by anchoring through wall mount brackets. Anchors or bolts not included.Warranty10 year limited replacement warrantyMaintenance When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products.

InteleStation® Stainless Steel - Open Style Cabinet - Wall MountSPECIFICATIONS

Model SBW7SDimensionsSeat Height 49 cmWidth 77 cmDepth 75 cmOverall Height 1.5 mWeight 53 kg



Fabrication & MaterialSurface Mount Panel, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasteners. Writing surface, divider panels, cabinet top and face plate are securely con-nected with tamper resistant fasteners. Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SBW9SAssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach furnished mounting bracket to wall and hang wall-mount unit on bracket. Secure unit to wall by anchoring through wall mount brackets. Anchors or bolts not included. Anchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Panels, Legs, Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Seat: For routine and regular cleaning mainte-nance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Stainless Steel - Enclosed Style Cabinet - Floor MountSPECIFICATIONS

Model SEF7SDimensionsSeat Height 48.7 cmWidth 77 cmDepth 75.4 cmOverall Height 1.5 mWeight 62.6 kg



Fabrication & MaterialCabinet, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasten-ers. Writing surface, divider panels, cabinet top and face plate are securely connected with tamper resistant fasteners. Face Plate: 14 ga. #4 finish stainless steel. Monitor cut out includes 1 cm thick protective poly-carbonate screen.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SEF9SFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure and Legs: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Legs: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Stainless Steel - Enclosed Style Cabinet - Back to BackSPECIFICATIONS

Model SEK7NDimensionsWidth 77 cmDepth 68.5 cmOverall Height 1.5 mWeight 100 kg



Fabrication & MaterialCabinet, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasten-ers. Writing surface, divider panels, cabinet top and face plate are securely connected with tamper resistant fasteners. Face Plate: 14 ga. #4 finish stainless steel. Monitor cut out includes 1cm thick protective poly-carbonate screen.Legs: 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorCabinet, Divider Panels, Writing Surface & Face Plate: #4 finish stainless steel.Legs: Black powder coat.OptionsAdd on unit model SEK9NFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure and Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Legs: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal.

InteleStation® Stainless Steel - Enclosed Style Cabinet - Back to BackSPECIFICATIONS

Model SEK7SDimensionsSeat Height 48.7 cmWidth 77 cmDepth 1.5 mOverall Height 1.5 mWeight 110 kg



Fabrication & MaterialCabinet, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasten-ers. Writing surface, divider panels, cabinet top and face plate are securely connected with tamper resistant fasteners. Face Plate: 14 ga. #4 finish stainless steel. Monitor cut out includes 1 cm thick protective poly-carbonate screen.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorCabinet, Divider Panels, Writing Surface & Face Plate: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SEK9SFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAnchor legs to floor using provided concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Legs: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

InteleStation® Stainless Steel - Enclosed Style Cabinet - Wall MountSPECIFICATIONS

Model SEW7NDimensionsWidth 77 cmDepth 34.3 cmOverall Height 70.6 cmWeight 50 kg



Fabrication & MaterialCabinet, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasten-ers. Writing surface, divider panels, cabinet top and face plate are securely connected with tamper resistant fasteners. Face Plate: 14 ga. #4 finish stainless steel. Monitor cut out includes 1 cm thick protective poly-carbonate screen.Wall Mount Brackets: 0.63 cm thick powder coated steel.Wall Hanger: 10 ga. powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.Color#4 finish stainless steel.OptionsAdd on unit model SEW9NFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach furnished mounting bracket to wall and hang wall-mount unit on bracket. Secure unit to wall by anchoring through wall mount brackets. Anchors or bolts not included.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure and Faceplate: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products.

InteleStation® Stainless Steel - Enclosed Style Cabinet - Wall MountSPECIFICATIONS

Model SEW7SDimensionsSeat Height 48.7 cmWidth 77 cmDepth 75.4 cmOverall Height 1.5 mWeight 61 kg



Fabrication & MaterialCabinet, Divider Panels & Writing Surface: 12 gauge #4 finish stainless steel with security fasten-ers. Writing surface, divider panels, cabinet top and face plate are securely connected with tamper resistant fasteners. Face Plate: 14 ga. #4 finish stainless steel. Monitor cut out includes 1 cm thick protective poly-carbonate screen.Legs and Seat Support: 25.5 cm radius curved portions of the legs support the top and for additional strength are fully welded to the certical tubes that support the seats. The tops of the curved tubes and the tops of the seat support tubes are fully welded to 15cm x 15cm x 0.63 cm thick steel plates. The bottoms of the seat tubes are fuly enclosed to conceal floor-mounting an-chors. 7.5 cm diameter 14 gauge steel finished fully welded tubes with black powder coat paint.Seats: Option 1: Super Slammer Stone - 33 cm diameter high density color impregnated com-pression molded composite that is highly scratch and stain resistant.Option 2: Stainless Steel - 14 guage, type 304. One piece 30.5 cm diameter with 3.8 cm drop edge. #4 finish.Wall Mount Brackets: 0.63 cm thick powder coated steel.Wall Hanger: 10 ga. powder coated steel.Made in the U.S.A.Environmental Test StandardsGREENGUARD and GREENGUARD Gold Certified by UL Environment. Product certified for low chemical emissions to UL 2818. UL.COM/GG.ColorSurface Mount Panel, Divider Panels & Writing Surface: #4 finish stainless steel.Legs: Black powder coat.Seats: Canyon, Wild Berry, Meadow, Mojave, Pine Cone, River Rock, Lagoon, Sea Spray, Raven, Stainless SteelOptionsAdd on unit model SEW9SFace plate cut out configuration can be customized to individual application.AssemblyAssembly required. Refer to manufacturers instructionsInstallationAttach furnished mounting bracket to wall and hang wall-mount unit on bracket. Secure unit to wall by anchoring through wall mount brackets. Anchors or bolts not included. Anchor legs to floor using provided concealed concrete expansion anchors.Warranty10 year limited replacement warrantyMaintenance Steel Enclosure: When cleaning stainless steel, Norix recommends the use of a cleaner made especially for stainless steel products. Legs: Norix recommends the use of soap and water for both the regular cleaning maintenance and deep-scrub cleaning of powder-coated seal. Seat: For routine and regular cleaning maintenance, Norix recommends the use of Simple Green® or an equivalent cleaning product. For the deep-scrub cleaning of tougher stains, marks and debris, we recommend the use of Clorox® Clean-Up® Cleaner + Bleach or an equivalent cleaning solution.

Documents

InteleStation Laminate - Open Style Cubicle€¦ · InteleStation® Laminate - Enclosed Style Cubicle SPECIFICATIONS Model chemical emissions to UL 2818. UL.COM/GG.CUBE36LE Dimensions