Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
“Integrating Engineering, Equipment Lifecycle and Energy Efficiency”
Phone: (813)501-7302
www.EnerGPlus.us
E-mail: [email protected]
About Us
Mission Statement:
To provide energy efficient solutions, designed to enhance the performance of their
existing systems, while reducing fossil fuel consumption and operational costs.
Vision:
Our vision is to minimize our clients energy needs through efficient and optimized
solutions. EnerG+ technology and services are designed to maximize the
performance of any fossil fuel based system, regardless of size or scope. As a result,
everyone will lead healthier lives by contributing towards a cleaner planet, utilizing
sustainable energy, while reducing operational costs year after year.
www.EnerGPlus.us
Overview RESTORE1030™: A single application restores the efficiency lost in air conditioner/
refrigeration units over time by up to 30% while providing the system internal
preventive maintenance.
RAPIDBOIL™ and RAPIDCHILL™: Energy saving additives which can be introduced into
any wet boiler or chiller system proven to recuperate up to 15% of lost energy.
SOLX Energy / TERMX: Reduce energy consumption on fixed speed staged, inverter
and digital scroll systems for solar thermal collection units for refrigeration & HVAC
systems by as much as 60%.
Reduction Fuel Stabilizer: This device is placed in the fuel line between the filters,
pump and the area of combustion reduces fuel consumption up to 30% for any fossil
fuel engine.
RECLEAN PRO™: Removes up to 95% of controlling dissolved and suspended solids
down to 1 micron thus greatly increasing the condenser’s thermal transfer rate and
no backwash required.
www.EnerGPlus.us
RESTORE1030™
RESTORE1030™ has been proven to increase A/C and refrigeration system efficiency by 15% on average by optimizing the system in 3 distinct ways:
1. Through the removal of oil-fouling (scale). This removal restores the 20-30% loss in heat transfer capability, allowing for enhanced refrigerant contact with coils. Additionally, your unit is protected from future internal corrosion for the life of the system.
2. By optimizing the refrigerant to evaporate or “boil” at a higher temperature. The cumulative effect of these 2 components working together results in a 73% improvement in heat transfer capability.
3. Through increases in lubricity and boosting the compressor oil’s performance. The tenacious bond actually keeps the friction reducing properties even when the oil is not present. In addition, there is less wear and tear on the equipment thus extending equipment life and lowering maintenance costs.
www.EnerGPlus.us
www.EnerGPlus.us
RESTORE1030™ Cumulative Decrease in A/C Efficiency according to ASHRAE*
Number of Years Percent Decrease
in Efficiency
1 -7%
2 -12%
3 -14%
4 -16%
5 -18%
10 -28%
20 -40%
*HVAC/R System performance is degraded by as much as 30% in a 10 year period due to the build-up of lubricants on internal surfaces.
A Survey of Refrigerant Heat Transfer and Pressure Drop Emphasizing the Oil Effects and In Tube Augmentation: “ASHRAE Winter Symposium of 1987; Schlager, Pate
and Berles.”
www.EnerGPlus.us
RESTORE1030™- DifferentiationRESTORE 1030 A/C Renew FRIGI-TECH ICECOLD MAXR
Generation PROA Second First First First First
Cleaning Agent X X X X X
Energy Savings 10—30% 5-10-% 5-10-%
Etching Agent (Adhesive) X
Polymer X
Seal Conditioner X
Metal Bonding Mechanical Electrostatic Electrostatic Electrostatic Electrostatic
Bonding Type Long Term Short Term Short Term Short Term Short Term
Elimination of Fouling X X X X
Prevention of Future Fouling X
Friction Reduction X X X X X
Refrigerant Evaporation at Lower
TemperaturesX X X X X
Decibel Reduction X X X X X
Compatible with all refrigerants X X X X X
Compatible with all oils X X X X X
Standardized government testing X X X
HVAC Lab Accredited Testing X
Improves SEER Rating X ? ? ? ?
www.EnerGPlus.us
RAPIDBOIL™ and RAPIDCHILL™
Energy saving additives which can be added to any closed loop boiler or chiller system. Water is used in heating and cooling systems because it is cost effective. In reality, water alone is not the most efficient transporter of heat. RAPIDBOIL™ and RAPIDCHILL™ improve the heat transfer properties of the water which significantly improves the overall system efficiency by 15%.
100% organic with low carbon footprint and high carbon reduction potential. Proven to be Non-Corrosive, works with any brand of inhibitor.
Independently tested and proven by leading R & Dcompany, Enertek International.
www.EnerGPlus.us
SOLX / THERM X
How it works? SOLX intellectual property adds an element of heat
which would under normal circumstances be generated by the
compressor, allowing the compressor or compressors to unload.
This process accelerates the heat transfer at condensation point, thus
improving the quantity of liquid flow through the expansion valve, in
other words reducing or eradicating flash gas.
As a result, the cooling capacity in the evaporator is enhanced, a process
which the systems normal control logic recognizes allowing the variable
flow compressor system to slow down (or if staged - shut down), thus
achieving substantial energy reductions.
www.EnerGPlus.us
SOLX / THERM X Key Features:
The hotter it gets, the less the compressor works.
Saves vast amounts of energy.
Considerably reduces CO2 emissions.
Eliminates compressor failure due to overheating.
Substantially increases compressor lifespan.
Phenomenal ROI with an unprecedented lifespan.
Coefficient of Performance figures (cooling capacity versus power consumption)
of over 8 are possible on our multi stage compression systems – just by adding
the free energy provided by the sun.
Retrofit systems are available on most types of refrigeration
www.EnerGPlus.us
SOLX / THERM X SOLX innovative single and multiplex solar thermal systems reduce the
energy consumption by 60% on fixed speed staged, inverter, and digital scroll systems.
SOLX thermal collection systems can be configured for any size unit using compressed refrigeration, or simply retrofitted onto the client's existing systems.
SOLX Products qualify for a 30% federal tax deduction, also known as the investment tax credit (ITC),up to 2019 and there is no cap on its value.
See tax deduction schedule below:
2018 – 2019: The tax credit remains at 30% of the cost of the system.
2020: Owners of residential & commercial solar can deduct 26% of the cost.
2021: Owners of residential and commercial solar can deduct 22 % of the cost.
2022 onwards: Owners of new commercial solar energy systems can deduct 10%. No federal credit for residential solar energy systems.
www.EnerGPlus.us
Reduction Fuel Stabilizer The device has been proven to be effective in numerous applications with
various fuel types including Heavy Fuel oil, Heating Oil, Diesel Fuel, Natural Gas, and Bunker fuels.
This aftermarket device is placed on the fuel line between the filters, pump, and the area of combustion.
Key points:
Return on Investment: 3-24 months (depending on fuel use)
13 model sizes- Determined by outside diameter of fuel line
Lowers fuel use 6-30%
Lowers greenhouse emissions
10 year warranty (Residential, match major manufacturer’s commercial warranty)
Does not void manufacturer warranty.
Cleans existing carbon buildup
1 hour installation time (average)
www.EnerGPlus.us
RECLEAN PRO™
RECLEAN PRO™ improves thermal transfer in the condenser and evaporative heat exchangers. This will utilize each chiller to its optimal efficiency thereby saving energy. In turn, the cooling towers are a slave to the chiller heat load and abilities to transfer temperature through their exchangers. This is where water savings are achieved.
RECLEAN PRO™ removes 95% of suspended solids down to one micron, which greatly increases the condenser water’s thermal transfer rate, and also manages dissolved solids that may produce fouling (scale).
By removing suspended solids and controlling dissolved solids RECLEAN PRO™ has been successful in reducing large percentages of make-up water to the cooling towers and energy needed to operate chillers.
Unlike most side-stream filters RECLEAN PRO’s™ system uses no media and requires no backwash or continuous maintenance.
RECLEAN PRO™ monitors chillers approach temperatures which will verify our system’s effectiveness in keeping exchanger tubes clean. RECLEAN PRO™ monitors and logs monthly make-up and bleed usages.
www.EnerGPlus.us