2
Instruction Sheet SMARTROLL™ Battery Pack Part Number 0099118 Battery Pack Description The battery pack enables wireless communication between the iOS device and the probe and supplies power to the probe. The battery pack provides a barometric pressure measurement that is used to compensate depth and dissolved oxygen measurements. The ambient temperature measurement is also provided by the battery pack. Kit Contents l Battery pack l 4 AA lithium batteries Install the Batteries The 4 AA batteries that are shipped with the battery pack are likely to last for 80 hours of continuous use. 1 Power indicator 2 On/Off button 3 Belt clip 4 Battery compartment latch 5 Cable connection 1. Twist the cable connector counterclockwise to remove the cable from the battery pack. 2. Slide the lever on the battery compartment to release the cover. 3. Install the 4 AA batteries according to the +/- indicators engraved on the outside cover. 4. Close the cover and slide the lever to lock the compartment. Information subject to change without notice. In-Situ, In-Situ logo, BaroMerge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO, RuggedCable, RuggedReader, TROLL, and Win-Situ are trademarks or registered trademarks of In-Situ Inc. © 2013. All rights reserved. 04/2013 | Rev. 001 | 0099112

InstructionSheet - In-Situ · InstructionSheet SMARTROLL™BatteryPack PartNumber0099118 BatteryPackDescription Thebatterypackenableswirelesscommunication betweentheiOSdeviceandtheprobeandsupplies

  • Upload
    vukiet

  • View
    213

  • Download
    0

Embed Size (px)

Citation preview

Page 1: InstructionSheet - In-Situ · InstructionSheet SMARTROLL™BatteryPack PartNumber0099118 BatteryPackDescription Thebatterypackenableswirelesscommunication betweentheiOSdeviceandtheprobeandsupplies

Instruction Sheet

SMARTROLL™ Battery PackPart Number 0099118

Battery Pack Description

The battery pack enableswireless communicationbetween the iOS device and the probe and suppliespower to the probe. The battery pack provides abarometric pressuremeasurement that is used tocompensate depth and dissolved oxygenmeasurements. The ambient temperaturemeasurement is also provided by the battery pack.

Kit Contents

l Battery pack

l 4 AA lithium batteries

Install the Batteries

The 4 AA batteries that are shipped with the batterypack are likely to last for 80 hours of continuous use.

1 Power indicator

2 On/Off button

3 Belt clip

4 Battery compartment latch

5 Cable connection

1. Twist the cable connector counterclockwise toremove the cable from the battery pack.

2. Slide the lever on the battery compartment to releasethe cover.

3. Install the 4 AA batteries according to the +/-indicators engraved on the outside cover.

4. Close the cover and slide the lever to lock thecompartment.

Information subject to changewithout notice. In-Situ, In-Situ logo, BaroMerge, BaroTROLL, HERMIT, iSitu, Pocket-Situ, RDO,RuggedCable, RuggedReader, TROLL, andWin-Situ are trademarks or registered trademarks of In-Situ Inc. © 2013. All rights reserved. 04/2013 | Rev. 001 | 0099112

Page 2: InstructionSheet - In-Situ · InstructionSheet SMARTROLL™BatteryPack PartNumber0099118 BatteryPackDescription Thebatterypackenableswirelesscommunication betweentheiOSdeviceandtheprobeandsupplies

Instruction Sheet

General Specifications

OperatingTemperature

-5 to 50° C (23 to 122° F); 95%relative humidity, non-condensing

StorageTemperature

-40 to 65° C (-40 to 140° F);95% relative humidity, non-condensing

Dimensions9.5 cm (3.75 in.) height, 7.6 cm(3 in.) depth, 5.7 cm (2.25 in.)width

Materials Polycarbonate and ABS

EnvironmentalRating

IP67 when battery cover isclosed

Output BLE Radio

Batteries 4 AA lithium or alkaline

Warranty 1 year

Certifications CE, FCC,WEEE

Sensor Specifications

TemperatureSensor

Accuracy: ±2° C maximum

Range: -20 to 70° C (-4 to158° F)

Resolution: 0.1° C

Units: Celsius, Fahrenheit

BarometricPressure Sensor

Accuracy: ±3mbarmaximum

Range: 300 to 1100mbar

Resolution: 0.01mbar

Units: psi, kPa, bar, mbar,mmHg,

2