INSTRUCTIONS

Vintage Scrapbook Page Layout #1

12 x 12 inches with photo mat and pull-out photo/journaling tag

My Angel Policy

You may use the instructions included with this tutorial to create and produce as many layouts as

you wish for fun or for profit.

However, the instructions or images may not be reproduced either in digital or printed format and

distributed for free or for profit. They may not be sold as part of a kit.

If you wish to purchase multiple copies of this book, templates or images for use in a class, please

e-mail the author at scrappinrabbit@gmail.com to obtain discount bulk pricing.

These instructions were written to the best of my ability. I am not responsible for any damages

caused by any omissions or misuse of supplies or equipment.

INTRODUCTION

In this e-tutorial, I show you step-by-step how to create the vintage layout on the cover page.

This is one of my favourite vintage themed scrapbook pages that I designed and have been selling in my

online shops.

The detailed instructions and photos show you

how to layer and place papers and embellishments. At

the beginning is a list of tools and supplies you will

need.

You can use embellishments you already

have. When I first started scrapbooking, I used lots of

Prima flowers but since flower embellishments don’t

come cheap, I started making my own. My book “My

Paper Garden” shows you how to create paper

flowers without the use of expensive punches or die-

cutting machines. It’s available in e-format on my

blog at http://scrappinrabbit.blogspot.ca/p/my-paper-

garden-my-paper-garden-is.html.

If you would like to make the large lace flowers shown in this layout, I provide a free tutorial for

making lace flowers on my blog at the following web address:

http://scrappinrabbit.blogspot.ca/2013/05/how-to-make-flowers-out-of-lace.html. (In this layout, I

followed the instructions in the tutorial and in addition I added a layer of sheer ribbon to make the

flowers.) Be forewarned though – these flowers are addictive and once you starting making a few, ideas

for customizing your own flowers will abound. I rarely purchase flowers anymore.

As you work through the instructions for this layout, I indicate measurements and also provide

tips to help make things easy. Once you’ve completed this layout, you’ll be able to make more in no

time.

The photo above shows the layout we will be working on. I’m also including on the next page

photographs of two other layouts I made following the same method, only with different embellishments

and colours for a different look. Yours need not be exactly the same.

I hope you enjoy making this project. If you need further clarification, feel free to email me at

scrappinrabbit@gmail.com. I plan on writing similar tutorials for other layouts I’ve created so your

constructive comments are appreciated.

Christine

www.scrappinrabbit.blogspot.ca

Before you start, gather up the following tools and supplies you will need to complete this project.

Tools

• Paper Trimmer

• Glue stick or glue tape

• White or clear glue in a bottle (my favourite is a white tacky glue that dries fast)

• Scissors

• Stapler

• Needle and thread

• Foam dots for attaching die-cut leaves

• Corner punch

• Sewing machine with zigzag stitch (optional if you want to stitch around your layout)

• Paper distressing tool or sandpaper (optional)

Following are the supplies I used:

• 12x12 inch background paper (I used paper from DCWV’s The French Country Stack)

• 12x12 inch cardstock that will coordinate with your background paper (I used green cardstock)

• Paper and colour-coordinated cardstock for photo mat and pull-out tag

• Paper doily (10-1/2 inches approx.)

• Distress ink (I used Ranger Distress Ink in Frayed Burlap)

• Long ornamental stems with beads (from the dollar store!)

• 3 large lace flowers (see the end of this tutorial if you wish to learn how to make your own)

• Strands of beads

• 7 smaller assorted flowers

• Die-cut leaves

• Crystal swirls

• 2 paper butterflies

• Stick on pearls (optional)

STEP 1 – Cut ! inch from the left side and

top of your 12x12 cardstock. The layout is

very thick so by cutting off a thin edge it will

allow your layout to fit properly in a page

protector.

STEP 2 – Cut " inch from the left side and

top of your background paper - your

cardstock will form a border around your

layout.

DO NOT GLUE YOUR BACKGROUND

PAPER TO YOUR CARDSTOCK JUST

YET!

STEP 3 – Use a paper distressing tool to fray

all four edges of the background paper.

TIP: You can also get the same effect with

scissors by running the blade along the edges

of the paper.

STEP 4 – Using a sponge, ink the edges and

corners of the background paper - this will

give a nice antique look.

Tip: I purchased a bag of makeup sponges at

my local dollar store and they work great!

For this layout, I used Ranger’s Distress Ink

in Frayed Burlap.

STEP 5 – Using a glue stick, adhere the doily

to the center of the background paper. Start by

adding glue to the larger center area of the

doily then dab a bit of glue here and there on

the lacy area being careful that the glue does

not ooze to the surface through the holes.

TIP: Applying archival mist will neutralize

the acid in the doily and help preserve it.

STEP 6 – Cut strands from the base of long

stems to make 2 bunches of 4-5 strands each.

(I used green and light blue beaded stems I

obtained from the dollar store. You can use

any type of long stems.)

To determine how long your stems need to be,

place 2 large lace flowers on the bottom of the

page as shown in the photo and insert stems

underneath. Make sure the flowers will cover

the base of the stems and that the stems do not

extend beyond the height or width of your

page (otherwise the layout will not fit in your

page protector). DO NOT GLUE THE

FLOWERS DOWN YET!!

Approximate measurements for the stems are

9 inches on the left side of the page (blue

stems), and 7 inches at the bottom extending

to the right (green stems).

STEP 7 – Attach the base of each bunch of

stems to the background paper with a couple

of staples. Don’t set staples too far apart since

the flowers will need to cover the stapled

area.

STEP 8 - Cut small squares of light-coloured

cardstock (approx. 1 x 1 inch) and glue them

over the stapled area of each bunch of stems

to help keep everything in place.

STEP 9 – Glue or tape the background paper

to your cardstock.

TIP: If you have access to a sewing machine,

try a zigzag stitch around the edges of your

background paper to help secure it to the

cardstock.

STEP 10 – Cut 3 strands of beads each about

5 inches long.

Form a loop with one strand by joining the

ends and use thread to tie them together.

Repeat with the other 2 strands.

Attach a strand underneath each of the 3

larger flowers with thread. Make sure the

bottom of the strands will be visible.

STEP 11 – Using thread, attach a small

square of cardstock to the bottom of each

flower. This will allow you to add glue to the

bottom of your flower and secure it to your

layout. (You risk glue oozing through the lace

if you try to apply it directly to the fabric.)

STEP 12 – Glue two of the larger flowers to

the bottom of your layout making sure they

cover the base of the stems. Position the

flowers so that the strands of beads at the

bottom do not extend beyond the page.

STEP 13 – To make the photo mat, cut a

piece of cardstock or paper (checkered design

in the photo) to measure 5-1/4 x 5-1/4 inches.

Cut a coordinating piece of paper (pink in the

photo) to measure 5 x 5 inches. Use a corner

punch to give a nice rounded edge. Ink the

edges of the paper to give an aged

appearance. Glue the paper to the cardstock.

STEP 14 – Apply glue to 3 sides on the back

of the photo mat to form a pocket. A tag will

be inserted in the right-hand side of the photo

mat so make sure you glue only the three

edges – with right side of paper facing you,

that would be the top, bottom and left edges.

Adhere the photo mat to the center of your

layout, angled slightly to the right.

Make sure the right-hand side of the photo

mat is the side with NO glue so that the tag

can slide in.

STEP 15 – To make the tag, cut a piece of

cardstock to measure approximately 4 x 5

inches. Use a border punch to create a

decorative edge (trim the width of your tag to

fit the punched border).

Trim coordinating paper 1/8 of an inch

smaller than the cardstock along each edge.

Apply ink to the edges of the paper and glue it

to the cardstock.

I also added ink to the top punched border and

stick-on pearls to embellish the tag.

The back of the tag remains blank so that it

can be used for journaling.

STEP 16 – Insert the tag in the pocket of the

photo mat, leaving the decorative edge

exposed.

STEP 17 – Glue the third large flower to the

top of the photo mat, making sure it doesn’t

interfere when pulling out the tag. Also make

sure the photo will be able to slide underneath

the bottom edge of the flower if needed.

STEP 18 – Once your large flowers have

been glued in place, you can start arranging

your smaller flowers.

Glue 3 small flowers on either side of the

stems at the left side of the layout.

Glue 2 small flowers between the two large

flowers at the bottom of the page.

STEP 19 – Use die-cut leaves (or cut your

own) to fill in spaces between the flowers.

Use foam dots to adhere leaves for a 3D

effect.

Tip: Use chalk and pens to add colour to your

leaves.

(Flowers with leaves)

STEP 20 – Apply a crystal swirl to the left of

the large flower at the top of your layout,

overlapping it slightly onto the photo mat.

STEP 21 – Add 2 more small flowers and

leaves on each side of the large top flower.

STEP 22 – Attach a butterfly close to the

stems on the left side of the page.

Attach another butterfly in the top right corner

of the page.

And here is the final product!

You are now ready to add your photos and

journaling.