22
INSTRUCTIONS Read this manual carefully before using your camera.

INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

INSTRUCTIONSRead this manual carefully before using yourcamera.

Page 2: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

Indicates circumstancesunder which mishandlingresulting from ignoring thissymbol could result inpersonal injury or propertydamage.

KEEP THE BATTERIES AWAY FROMFIRE. NEVER TRY TODISASSEMBLE, RECHARGE, ORSHORT-CIRCUIT BATTERIES.

KEEP THE BATTERY OUT OF THEREACH OF CHILDREN. IF A CHILDSWALLOWS A BATTERY, CONTACTA DOCTOR IMMEDIATELY.

WARNING

2

Page 3: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

NEVER ATTEMPT TO DISASSEMBLETHE CAMERA; IT CONTAINS A HIGH-VOLTAGE CIRCUIT. IF THE INTERNALPARTS OF THE CAMERA AREEXPOSED DUE TO DROPPING ORDAMAGE, REMOVE THE BATTERIESIMMEDIATELY TO PREVENTFURTHER USAGE.

IN CASE OF MALFUNCTION,CONSULT YOUR NEARESTOLYMPUS DEALER OR OLYMPUSSERVICE CENTER.

3

Page 4: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

Names of parts .................................. 5Cartridge .......................................... 7Loading the battery .......................... 8Loading the cartridge film ................ 10Taking pictures ................................. 11Flash photography ........................... 12Unloading the cartridge film ............. 13Setting the print type ........................ 14Print area on film .............................. 15Care and storage ............................. 16Specifications................................... 20

4

Page 5: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

NAMES OF PARTS

Shutter release buttonAE light sensor*ViewfinderLens*Red-eye reduction lampFlash*Lens barrier switchCartridge cover release

*Do not soil as this can cause blurredpictures. Wipe clean with a soft cloth.

5

Page 6: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

ATTACHING THE STRAPThe camera strap ring tip can be usedto press the mid-roll rewind button.

Print type selector switchBattery check lampFlash ready lampViewfinderExposure counterStrap eyeletCartridge coverMid-roll rewind buttonBattery compartment coverBattery compartment cover releasePicture frameStrap ring tip

6

Page 7: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

Visual Exposure Indicator• Only cartridges with the

(unexposed) visual exposureindicator can be used with thiscamera.

• When a cartridge with other than thevisual exposure indicator is

loaded, the camera will rewind thefilm and set the cartridge to(exposed).

• Take along plenty of film cartridgeswhen traveling to foreign countriesand other areas where cartridgepurchasing may be difficult.

• Do not forcibly move the visualexposure indicator because this maydamage the cartridge. Using adamaged cartridge can result incamera trouble.

CARTRIDGEIX240 Cartridge Film

7

Page 8: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

LOADING THE BATTERY

Use one 3V lithium battery (CR2).1. Slide the battery compartment

cover release ( ) and open thecover ( ).

2. Load the battery and align theand ends correctly.

3. Turn the lens barrier switch ( ) toturn on the camera. If the batterycheck lamp starts blinking, replacethe battery ( ). About 15 rolls offilm can be used with one new 3Vlithium battery (when the flash isused on half of pictures).

Notes:• Dispose of used batteries in the battery

recycling boxes at stores selling batteries.• If lithium batteries are not fully discharged,

protect them against short-circuiting (e.g., bytaping the contacts) before disposal.

8

Page 9: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

Battery Handling• Observe the precautionary remarks

written on the batteries.• When the camera is not used for an

extended period of time, remove thebattery.

• Keep spare batteries on hand whengoing on a long trip or to a cold area.

• Sweat, oil, and so on can prevent abattery's terminals from makingelectrical contact. To avoid this, wipeboth terminals before loading thebattery.

9

Page 10: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

LOADING THE CARTRIDGEFILM

Use unexposed negative-color 1X240cartridge film (ISO 100-400).1. Make sure that is displayed on

the camera's exposure counter. Turnthe cartridge cover release toopen the cartridge cover

2. Insert a cartridge with the(unexposed) visual exposureindicator and close the cartridgecover . The film will automati-cally advance to the first frame and"1" will appear in the exposurecounter• If the cartridge film is not loadedcorrectly, the two lamps beside theviewfinder will blink. Reloadunexposed film.

10

Page 11: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

TAKING PICTURES

1. Turn the lens barrier switch toturn on the camera.

2. Press the shutter release buttonhalfway to make sure the flash

ready lamp lights.• When the flash ready lamp isblinking, the flash is beingrecharged and the shutter cannotbe released.

3. Compose the shot in the viewfinder.Press the shutter release button

to take the picture.• Working distance: 1.0 m (3.3 ft)~ .•Always turn off the camera whenyou finish taking pictures.

WARNING: SERIOUS EYEDAMAGE MAY RESULT FROMLOOKING DIRECTLY AT THE SUNTHROUGH THE VIEWFINDER.

11

Page 12: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

ISO200400

Flash Range1.0 ~ 2.3m (3.3 ~ 7.5 ft)

1.0 ~ 3.2m (3.3 ~ 10.4ft)

FLASH PHOTOGRAPHY

Check the flash ready lamp.Blinking:The flash is recharging, and the

shutter cannot be released.Lit: The flash is charged. Shooting

is possible.

Red-eye reduction lampThis lamp helps to reduce the red-eye ef-fect with flash pictures. The red-eye reduc-tion lamp lights when the shutter releasebutton is pressed lightly. Press the shutterrelease button after the red-eye reductionlamp has been lit for about 1 second.

Using negative color film12

Page 13: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

1. The film will be rewound automati-cally when the end of the roll isreached , Even when the film isrewound, the number in the expo-sure counter remains the same.

2. Wait until the motor stops. Ensurethat the two lamps beside the view-finder are blinking. Open the car-tridge cover

3. Remove the cartridge .The car-tridge visual exposure indicator willbe set to (exposed).•The camera will not operate untilthe rewound cartridge is removed.

• When the cartridge is removed, theexposure counter returns to

4. To rewind the film before the end ofthe roll, press the mid-roll rewindbutton using the camera strapring tip or anything equivalent. Thecartridge will be set to (exposed).

UNLOADING THECARTRIDGE FILM

13

Page 14: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

SETTING THE PRINT TYPE

Set the print type selector switch to thedesired type: C, H or P.

Print type selector switchC type viewfinderH type viewfinderP type viewfinder

Always keep the print type selectorswitch set correctly. The print typesetting is optically recorded on the film.The number of exposures does notchange even when the print type ischanged.

14

Page 15: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

PRINT AREA ON FILM

PrintType Setting Configuration

H

C

P

Print typeC typeH typeP type

Aspect ratioApprox. 2:3Approx. 9:16Approx. 1:3

15

Page 16: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

CARE AND STORAGE

1. Do not leave the camera in anyplace exposed to excessive heat,humidity, or direct sunlight — forexample, in a car or on the beach.

2. Do not expose the camera toformalin or naphthalene.

3. If the camera gets wet, wipe it witha dry towel. The salt in seawatercan be especially damaging.

4. Do not use organic solvents, suchas alcohol or paint thinner whencleaning the camera.

16

Page 17: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

5. Do not leave the camera on or neara television, refrigerator, or otherappliance with a magnetic field.

6. Do not expose the camera to dustor sand as this could cause seriousdamage.

7. Do not shake or shock the camera.• Keep the camera in a well-ventilated

place.• Do not expose the camera to

extreme heat (over 40°C/104°F) or toextreme cold (below -5°C/23°F). Lowtemperatures, even within this range,may sometimes cause deteriorationin battery performance, temporarilydisabling the camera.

17

Page 18: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

• When transporting the camera froma cold place to a warm place or inthe event of a sudden temperaturechange, put the camera into a plasticbag.This allows the camera'stemperature to change slowly. Oncethe camera has adjusted to the newtemperature, you can remove it fromthe bag and use it.

18

Page 19: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

• Avoid leaving the camera unused forlong periods of time. This can causemold to grow on the camera as wellas other problems. Try to press theshutter release button and check theoperation of the camera before use.

• Some airport X-ray machines candamage the film in your camera. Tryto avoid passing your camerathrough these machines. Give it tothe security officer for manualinspection.

• This camera is not suitable forprofessional use or for use underextreme conditions.

19

Page 20: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

SPECIFICATIONS

Type: Fixed-focus lens-shutter camera.Film format: IX240 cartridge film.Image size: 16.7 x 30.2 mm.Print type: Selection between C, H and P print

types.Lens: Olympus lens, 24 mm F7, 3 elements in

3 groups.Shutter: Programmed electronic shutter

(1/200 -1/50 sec).Viewfinder: Albada viewfinder 0.33X

magnification. Flash ready lamp. Batterycheck lamp.

Focusing: Fixed-focus. Focus range — 1.0 m(3.3 f t )~ .

Exposure counter: Progressive type.Film speed: Automatic setting (ISO 100, 200

and 400).

20

Page 21: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

Film loading: One-touch insertion, automaticloading (automatically advanced to firstframe when cartridge cover is closed).

Film advance: Automatic film winding.Film rewind: Automatic rewind at end of roll.

Mid-roll rewind also possible.Flash:Built-in flash with red-eye reduction lamp.

Flash is automatically activated in low-light conditions.

Data recording: Optical recording system (printtype information only)

Power source: One 3V lithium battery (CR2).Dimensions: 123 (W) x 50 (H) x 36 (D) mm (4.8

x2x1.4in) .Weight: 130 g (4.6 oz) (without battery).

Design and specifications are subject tochange without notice.

21

Page 22: INSTRUCTIONS Read this manual carefully before using your ...2. Load the battery and align the and ends correctly. 3. Turn the lens barrier switch ( ) to turn on the camera. If the

OLYMPUS OPTICAL CO., LTD.OLYMPUS AMERICA INC.OLYMPUS OPTICAL CO. (EUROPA) GMBH.

OLYMPUS SINGAPORE PTE. LTD.

OLYMPUS KOREA CO., LTD.

Fax. 0081-3-3346-8380Tel. 00852-2730-1505 Fax. 00852-2730-7976

This device complies with part 15 of the FCC Rules. Operation is subjectto the conditions that this device does not cause harmful interference.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

This camera complies with EU directive 89/336/EEC for CE marking.Die CE-Marke zeigt an, dass diese Kamera die EG-Richtlinie 89/336EWG erfüllt.Cet appareil photo est conforme à la directive UE89/336/CEE pour le marquage CE.Esta cámara cumple con la directiva de la Unión Europea 89/336/EEC para la marca de CE.

CS0474- 63039-400-OLY A 0201

San-Ei Building, 22-2, Nishi Shinjuku 1 -chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 1-800 "O" CAMERA(622-6372)

(Premises/Goods delivery) Wendenstrasse 14-18, 20097 Hamburg, Germany. Tel. 040-237730(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

491B River Valley Road, #13-04 Valley Point Office Tower, Singapore 248373Tel. 7387838/1 -800-OLYMPUS(6596787)

8F Central Banking Corporation Bldg., 826-20 Yoksam-dong, Kangnam-gu, Seoul 135-081 Korea. Tel. 02-3466-2910