Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
INSTRUCTIONS
SOLAR 3" LED PERIMETER POST CAP – ASSEMBLY P/N: LS045310
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
LIGHT HOUSING
CAP
PHILLIPS SCREWS
TREE CLIPS
POST
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
4X 6-32 X 3/8” LONG
GASKET
4X CHRISTMAS
LIGHT HOUSING
CAP
PHILLIPS SCREWS
TREE CLIPS
POST
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
4X 6-32 X 3/8” LONG
GASKET
4X CHRISTMAS
LIGHT HOUSING
CAP
PHILLIPS SCREWS
TREE CLIPS
POST
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
4X 6-32 X 3/8” LONG
GASKET
4X CHRISTMAS
LIGHT HOUSING
CAP
PHILLIPS SCREWS
TREE CLIPS
POST
1. INSTALL INTO LIGHT HOUSING AS SHOWN.2. ATTACH LIGHT HOUSING ONTO POST AND SECURE USING
AS SHOWN.3. PLACE CAP ONTO LIGHT HOUSING AND SECURE USING
.
#2 PHILLIPS DRIVER
INSTALLATION INSTRUCTIONSCAP WITHOUT LIGHT
CC025303
4X 6-32 X 3/8” LONG
GASKET
4X CHRISTMAS
For additional product or installation assistance, please call 844-922-2368 (844-9-ACCENT).
For additional product or installation assistance, please call 844-922-2368 (844-9-ACCENT).
For additional product or installation assistance, please call 844-922-2368 (844-9-ACCENT).
For additional product or installation assistance, please call 844-922-2368 (844-9-ACCENT).
©2018 Railing Accents™
All Rights Reserved. Version 1.1
©2018 Railing Accents™
All Rights Reserved. Version 1.1
©2018 Railing Accents™
All Rights Reserved. Version 1.1
©2018 Railing Accents™
All Rights Reserved. Version 1.1
SOLAR 3" LED PERIMETER POST CAP – ASSEMBLY P/N: LS045310
SOLAR 3" LED PERIMETER POST CAP – ASSEMBLY P/N: LS045310 SOLAR 3" LED PERIMETER POST CAP – ASSEMBLY P/N: LS045310
Solar Post Cap Light Installation
Step 1 Remove the plastic tab from the battery compartment to allow connection to the terminal. Batteries are included with the solar post cap, but may not be installed. Make sure batteries are seated firmly in place.
Step 2 Apply an exterior-grade clear silicone adhesive to the underside of the post cap and place firmly on post.
Notes: The battery should last 3-5 years. The battery is a LiFePO4 battery with a size of 14500, capacity - 600 mAh. Do not use regular batteries in the solar post cap light. The solar panel will last the lifetime of the light (15+ years). On a full charge, the lights will last more than 24 hours. This reserve is to help with cloudy day performance. The solar panel should fully charge a completely dead battery in about 8 hours of direct sunlight. The LED light output is 3000 Kelvin.
Solar Post Cap Light Installation
Step 1 Remove the plastic tab from the battery compartment to allow connection to the terminal. Batteries are included with the solar post cap, but may not be installed. Make sure batteries are seated firmly in place.
Step 2 Apply an exterior-grade clear silicone adhesive to the underside of the post cap and place firmly on post.
Notes: The battery should last 3-5 years. The battery is a LiFePO4 battery with a size of 14500, capacity - 600 mAh. Do not use regular batteries in the solar post cap light. The solar panel will last the lifetime of the light (15+ years). On a full charge, the lights will last more than 24 hours. This reserve is to help with cloudy day performance. The solar panel should fully charge a completely dead battery in about 8 hours of direct sunlight. The LED light output is 3000 Kelvin.
Solar Post Cap Light Installation
Step 1 Remove the plastic tab from the battery compartment to allow connection to the terminal. Batteries are included with the solar post cap, but may not be installed. Make sure batteries are seated firmly in place.
Step 2 Apply an exterior-grade clear silicone adhesive to the underside of the post cap and place firmly on post.
Notes: The battery should last 3-5 years. The battery is a LiFePO4 battery with a size of 14500, capacity - 600 mAh. Do not use regular batteries in the solar post cap light. The solar panel will last the lifetime of the light (15+ years). On a full charge, the lights will last more than 24 hours. This reserve is to help with cloudy day performance. The solar panel should fully charge a completely dead battery in about 8 hours of direct sunlight. The LED light output is 3000 Kelvin.
Solar Post Cap Light Installation
Step 1 Remove the plastic tab from the battery compartment to allow connection to the terminal. Batteries are included with the solar post cap, but may not be installed. Make sure batteries are seated firmly in place.
Step 2 Apply an exterior-grade clear silicone adhesive to the underside of the post cap and place firmly on post.
Notes: The battery should last 3-5 years. The battery is a LiFePO4 battery with a size of 14500, capacity - 600 mAh. Do not use regular batteries in the solar post cap light. The solar panel will last the lifetime of the light (15+ years). On a full charge, the lights will last more than 24 hours. This reserve is to help with cloudy day performance. The solar panel should fully charge a completely dead battery in about 8 hours of direct sunlight. The LED light output is 3000 Kelvin.