Upload
trandieu
View
217
Download
0
Embed Size (px)
Citation preview
11/28/2011
Suitability
Mounted on metal surface
Wet environmentsSecurity sensitive doors
Readers mounted togetherbetween readers
12 inches
Quickstart guide
This supplement is a brief guide to installing a P series compact system. Advanced features such as card zoning are not covered in this guide. For further information, a full installation manual is available on the website.
Exit button(push to make)
Electric release
12V DC power supply
12V DC release current rating must be less than 1A.
P75 Screw connector option
The unit should be mounted in conjunction with an electrical backbox to achieve the required clearance for the connector.
If an adaptor plate (310-750-US) is fitted, the mountings on the backbox can also be used.
+12V
+12V
0V
0V0V
Exit
Ins-30003-US PROXIMITY P series compact reader Paxton
Technical Support
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298 [email protected]
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Indoor use only
+12V DC
0V
Lock 12V
Lock 0V
Exit input
Exit 0V
Enrolment Card - must be presented when the system is first powered on
BEEP
!
BEEP!
2 3 4
1. At in
stalla
tion,
prese
nt thi
s card
to th
e
reade
r to v
alida
te the
toke
ns in
this
pack
2. To
re-va
lidate
a us
er tok
en pr
esen
t this
enrol
ment c
ard to
the r
eade
r foll
owed
by th
e
user
token
Paxto
n Acce
ss
FUNCTIO
N CARD
enrol
ment c
ard
More in
fo: ht
tp://p
axton
.info/
74
1. At in
stalla
tion,
prese
nt thi
s card
to th
e
reade
r to v
alida
te the
toke
ns in
this
pack
2. To
re-va
lidate
a us
er tok
en pr
esen
t this
enrol
ment c
ard to
the r
eade
r foll
owed
by th
e
user
token
Paxto
n Acce
ss
FUNCTIO
N CARD
enrol
ment c
ard
More in
fo: ht
tp://p
axton
.info/
74
1
1. At installation, present this card to the reader to validate the tokens in this pack
2. To re-validate a user token present thisenrolment card to the reader followed by the user token
FUNCTION CARDenrolment card
1.At in
stalla
tion,
prese
nt thi
s card
to th
e
reade
r to v
alida
te the
toke
ns in
this
pack
2.To
re-va
lidate
a us
er tok
en pr
esen
t this
enrol
ment c
ard to
the r
eade
r foll
owed
by th
e
user
token
FUNCTIO
N CARD
enrol
ment c
ard
More in
fo: ht
tp://p
axton
.info/
74
1. Take the enrolment card from the new pack of user cards.2. Present the enrolment card to the reader.3. The reader beeps and the LED's light up as the enrolment card is acknowledged.4. All cards in the pack are now valid. The enrolment card can now be returned to it's pack
Reset - Use 1 method
1. Power down the unit.2. Press and hold the exit button.3. Power up the unit. It will give several quick beeps.4. Wait for a further beep and then release and press the exit button twice more.5. The reader will beep 3 times. OR1. Present Enrolment card.2. Present Door open time card twice.3. Present Enrolment card.4. Present Door open time card twice.5. WAIT FOR 5 SECONDS
Reader covers Additional covers are available in black, white, grey, blue and silver. Registered installers can order these free of charge by logging onto the secure installer extranet: http://paxton.info/1035. If you are not a registered installer please call us on: 877.438.7298 for more information.
Mounting
Wiring
Issuing tokens
1. Across each double page there are 'pairs' of cards - a 'User card' and a corresponding 'Shadow card'.2. Write the name of the user on the shadow card.3. Take the user card from the opposite pouch and issue to the user.4. Keep the card pack containing the shadow cards in a safe place.
1 2 3 4
User cards
Shadow cards
Bar a user
1. When a card is lost or stolen it is important to bar the card from your system to avoid unauthorized access.2. To bar a card or token take it's corresponding shadow card from the card pack.3. Present the shadow card to the reader. This will remove the lost card or token from your system.4. A barred card can re-validated by presenting the enrolment card followed by the user card to the reader.
1 2 3 4
Fail open release card - Compact systems are fail closed as default
THIS CARD CAN ONLY BE USED WITH A FAIL OPEN LOCK.1. Take the fail open release function card from the starter pack.2. Present/swipe the card through the reader. The reader will beep for about a second.3. The reader is now set to fail open mode. This allows safe operation of the door in case of fire: The lock will release when the power is cut.4. To revert to fail closed mode, swipe the card again and the reader will beep once.
1 2 3 4
BEEP
! BEEP!
This
card
is us
ed w
ith sy
stems w
here
a fail
open
electr
ic rel
ease
is us
ed fo
r the
safe
opera
tion i
n the
even
t of a
fire.
Pres
ent t
he ca
rd to
the re
ader
to
drive
a fai
l ope
n rele
ase o
r a m
agloc
k. Pr
esen
t the
card
again
to re
vert
to the
fail c
losed
opera
tion
Paxto
n Acce
ss
FUNCTIO
N CARD
fail o
pen r
eleas
e
This
card
is us
ed w
ith sy
stems w
here
a fail
open
electr
ic rel
ease
is us
ed fo
r the
safe
opera
tion i
n the
even
t of a
fire.
Pres
ent t
he ca
rd to
the re
ader
to
drive
a fai
l ope
n rele
ase o
r a m
agloc
k. Pr
esen
t the
card
again
to re
vert
to the
fail c
losed
opera
tion
Paxto
n Acce
ss
FUNCTIO
N CARD
fail o
pen r
eleas
e
This card is used with systems where a fail openelectric release is used for the safe operation in the event of a fire. Present the card to the reader todrive a fail open release or a maglock. Present the card again to revert to the fail closed operation
FUNCTION CARDfail open release
Door open time (seconds)
1. Take the silent operation function card from the starter pack.2. Present the card to the reader. The reader will beep.3. The reader is now in silent operation mode.4. Present the card again to disable silent operation mode. The reader will beep twice.
Silent operation
1. Take the door open time function card from the starter pack.2. Present the card to the reader. The reader will start beeping.3. Wait for the required period you wish the door to remain open.4. Present the card again at the end of the period to set the open time. The beeping will stop.
1 2 3 4
BEEP
! BE
EP!
BEEP!
Paxt
on A
cces
s
FUNCTI
ON CARD
silen
t ope
ratio
n
Pres
ent t
his ca
rd to
silen
ce th
e bee
ping n
oises
made b
y the
read
er.
Pres
ent t
his ca
rd ag
ain to
re-e
nable
the b
eepin
g nois
es
Paxt
on A
cces
s
FUNCTI
ON CARD
silen
t ope
ratio
n
Pres
ent t
his ca
rd to
silen
ce th
e bee
ping n
oises
made b
y the
read
er.
Pres
ent t
his ca
rd ag
ain to
re-e
nable
the b
eepin
g nois
es
FUNCTION CARD silent operation
Present this card to silence the beeping noises made by the reader. Present this card again to re-enable the beeping noises
1 2 3 4
BEEP
!
BEEP!
Paxto
n Acc
ess
FUNCTI
ON CARD
door
open
time c
ard
The p
eriod
that
the d
oor i
s unlo
cked
for w
hen a
valid
toke
n is p
rese
nted
is se
t as f
ollow
s:
1. Pr
esen
t this
card
2. W
ait fo
r the
requ
ired p
eriod
3. Pr
esen
t this
card
again
, the
beep
ing w
ill sto
p
Paxto
n Acc
ess
FUNCTI
ON CARD
door
open
time c
ard
The p
eriod
that
the d
oor i
s unlo
cked
for w
hen a
valid
toke
n is p
rese
nted
is se
t as f
ollow
s:
1. Pr
esen
t this
card
2. W
ait fo
r the
requ
ired p
eriod
3. Pr
esen
t this
card
again
, the
beep
ing w
ill sto
pFUNCTION CARD door open time card
The period that the door is unlocked for when a valid token is presented is set as follows:
1. Present this card 2. Wait for the required period 3. Present this card again, the beeping will stop
FCC ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
11V DC 14V DC
100mA
1A
-20 °C (-4 °F) +55 °C (+131 °F)
IPX7
1 10,000
1 100
1 sec 60 secs
1 2
1 3
P38 1 1/2 inch 3 inch 1/2 inch
P50 2 inch 4 inch 5/8 inch
P75 3 inch 5 1/2 inch 5/8 inch
Voltage
Specifications
Operating temperature
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Outdoor Use
Features
Door open time
Number of Card Packs
Time zones (with additional time clock)
Silent operation
Can be used with fail OPEN locks
Can be used with fail CLOSED locks
Exit button input
Waterproof - Fixed cable
Number of Users
Access levels (Color Zones)
Switchable current
Min
Min
Max
Max
Yes
Yes
Yes
Yes
Waterproof - P75 - Screw connection Indoor use