INSTITUTE OF WELDING & TESTING TECHNOLOGY™ · PDF fileINSTITUTE OF WELDING & TESTING TECHNOLOGY ... TWI (Cambridge - UK) Certified Welding Inspector, ... opportunities may impact

INSTITUTE OF WELDING & TESTING TECHNOLOGY™DIN EN ISO 9001-2008 CERTIFIED INSTITUTE

www.weldingtesting.org

303/304/305 Laxmi Industrial Estate, Penkar pada, Off. W.E.Highway, Near Dahisar Checknaka, Mira Road, Thane -401 104, INDIA 303/304/305 Laxmi Industrial Estate, Penkar pada, Off. W.E.Highway, Near Dahisar Checknaka, Mira Road, Thane -401 104, INDIA Web: www.weldingtesting.org • Email: [email protected], [email protected] • Mob. +91 98922 63850, 98690 21461, +91 22 2896 7969Web: www.weldingtesting.org • Email: [email protected], [email protected] • Mob. +91 98922 63850, 98690 21461, +91 22 2896 7969

Institute of Welding & Testing Technology (IWTT) is one of the first organization in India which is certified in accordance to DIN EN ISO 9001-2008 by TUV NORD CERT GmbH for Training, Certification, Inspection and Consultancy for Welding, Brazing, Soldering, Gas Cutting, Non Destructive, Testing and Industrial Painting as per ASME Section IX, AWS, ASNT, ISO 3834, EN ISO 15085 SSPC Standards.

About us:

Services provided by IWTT www.weldingtesting.org

We also conduct tailor made inplant training & certification Programs.

l

l

l

Training and Certification

Third party Inspection

Consultancy

Satish P Sawant [Director] is in the field of welding since 1987.

He is a Welding Engineer and Mechanical Engineer, ASNT Level III, AWS - CWI Certified Welding Inspector, CSWIP - TWI (Cambridge - UK) Certified Welding Inspector, In ternat iona l Weld ing Technologist (IWT) ,NACE International Paint and Coating Certified inspector, Lead Auditor ISO 9001-2008, Lead Auditor TS 16949, AIAG Supplier Auditor

He has an experience of more than 27 years in teaching various subject of mechanical engineering related to weld engineering. He has worked for Advani - Oerlikon Ltd for 5 years and Larsen & Toubro Limited for 16 years and now with Institute of Welding & Testing Technology since 2008. He has conducted number of training programs in India and abroad. [Singapore / Philippines / Thailand / Indonesia/ South Africa etc]

Satish P Sawant, Director

INSTITUTE OF WELDING & TESTING TECHNOLOGY™2

l

l

l

Lean Management in welding

Failure analysis

Quality build up activity

IWTT offers services in Training, Third Par ty Inspect ion and prov id ing customized Solutions for Welding, Brazing, Soldering, Cutting, NDT & Paint –coating related issues under one roof.

The training and consultancy services are based on our experience of last 27 years. During this tenure, IWTT has Constantly interacted with welders, NDT specialists, welding engineers and paint –coating technologists all over the world.

l

l

Continuous Improvement by way of WELDING KAIZENS

Simultaneous weld engineering

We are aware of the problems in manufacturing industry and have the best solutions to resolve them.

IWTT has provided solutions for complex weld-engineering issues and performed failure analysis on components from petrochemical plants, oil and gas pipelines, offshore structures, ships, pharmaceutical plants, food processing equ ipment , gas tu rb ine eng ine components, metros, aircraft, aerospace vehicles, automobiles etc.

A international Automotive and Aerospace Trainer in 2008.He has an experience of more than 35 years in teaching various subject, He is the First Indian to attain the recognition to an International level Trainer for Certification Body Auditor Trainer

Wg Cdr HS AnandQuality Management Consultant and Trainer

for TS 16949 and AS 9100 Standards. He also specializes as a Trainer for AIAG Core Tools like APQP, FMEA, SPC, MSA and PPAP besides an authority on subjects like Benchmarking, 8D Problem Solving, GD & T.

INSTITUTE OF WELDING & TESTING TECHNOLOGY™ 3

Retired after 40 years of his nonstop association with the welding education & technology development wing of M/S Ador Welding Limited (formerly known as Advani-Oerlikon Ltd.), worked in a capacity of Chief Manager (Training & Technical Services). He is a Qualified Trainer (welding)-Central Training Institute Mumbai, functions under the ministry of HRD Govt. of India. Qualified Forman & Supervisor - V.J.T.I. Mumbai, the Technical Education Board of Maharashtra.

Narendra H SinghChief Consultant & Trainer

Qualified Welding Inspector - Institute of Welding UK. He has also undergone an intensive successful training programme in Thermal Spraying Technology at Melbourne in Australia, organized by M/S METCO Inc. of USA.

He was honoured by the company for his outstanding performance with the most prestigious MERITORIOUS MARQUEE AWARD in 2007-08.

Ramprosad Khatik is in the field of NDT since 1993. He is a Mechanical Engineer, ASNT-(American Society for Non-Destructive Testing) Level III – in MT, UT, RT, VT, PT & NAS-(National Aerospace Specification) 410 Level III and Certified Welding Inspector, Advance course in Measuring Instrument & Measuring Instrument & QA/QC-Chennai,BARC –Level -II(RSO), Lead Auditor ISO 9001-2008

He has an experience of more than 20 years in teaching various subject of mechanical engineering related to NDT-NDE. He has worked for Design crafts India pvt.ltd NDT Lab for (Completed project RTF Jetty Area for Siepem UK Ltd. Relience Jamnagar Refinery,Bangladesh Gas Field,and various ONGC Project Oil Rigs ON-Shore/Off Shore), Welspun Gujarat Stahal Rohren Ltd – Godrej & Boyce Mfg Co.Ltd

Ramprosad Khatik Consultant & Trainer

We also conduct tailor made inplant training & certification Programs. www.weldingtesting.org • Email: [email protected]

Institute of Welding & Testing Technology (IWTT) is one of the first organization in India which is certified in accordance to DIN EN ISO 9001-2008 by TUV NORD CERT GmbH for Training, Certification, Inspection and Consultancy for Welding, Brazing, Soldering, Gas Cutting, Non Destructive, Testing and Industrial Painting as per ASME Section IX, AWS, ASNT, ISO 3834, EN ISO 15085 SSPC Standards.

About us:

Services provided by IWTT www.weldingtesting.org

We also conduct tailor made inplant training & certification Programs.

l

l

l

Training and Certification

Third party Inspection

Consultancy

Satish P Sawant [Director] is in the field of welding since 1987.

He is a Welding Engineer and Mechanical Engineer, ASNT Level III, AWS - CWI Certified Welding Inspector, CSWIP - TWI (Cambridge - UK) Certified Welding Inspector, In ternat iona l Weld ing Technologist (IWT) ,NACE International Paint and Coating Certified inspector, Lead Auditor ISO 9001-2008, Lead Auditor TS 16949, AIAG Supplier Auditor

He has an experience of more than 27 years in teaching various subject of mechanical engineering related to weld engineering. He has worked for Advani - Oerlikon Ltd for 5 years and Larsen & Toubro Limited for 16 years and now with Institute of Welding & Testing Technology since 2008. He has conducted number of training programs in India and abroad. [Singapore / Philippines / Thailand / Indonesia/ South Africa etc]

Satish P Sawant, Director


l

l

l

Lean Management in welding

Failure analysis

Quality build up activity

IWTT offers services in Training, Third Par ty Inspect ion and prov id ing customized Solutions for Welding, Brazing, Soldering, Cutting, NDT & Paint –coating related issues under one roof.

The training and consultancy services are based on our experience of last 27 years. During this tenure, IWTT has Constantly interacted with welders, NDT specialists, welding engineers and paint –coating technologists all over the world.

l

l



We are aware of the problems in manufacturing industry and have the best solutions to resolve them.

IWTT has provided solutions for complex weld-engineering issues and performed failure analysis on components from petrochemical plants, oil and gas pipelines, offshore structures, ships, pharmaceutical plants, food processing equ ipment , gas tu rb ine eng ine components, metros, aircraft, aerospace vehicles, automobiles etc.

A international Automotive and Aerospace Trainer in 2008.He has an experience of more than 35 years in teaching various subject, He is the First Indian to attain the recognition to an International level Trainer for Certification Body Auditor Trainer

Wg Cdr HS AnandQuality Management Consultant and Trainer

for TS 16949 and AS 9100 Standards. He also specializes as a Trainer for AIAG Core Tools like APQP, FMEA, SPC, MSA and PPAP besides an authority on subjects like Benchmarking, 8D Problem Solving, GD & T.


Retired after 40 years of his nonstop association with the welding education & technology development wing of M/S Ador Welding Limited (formerly known as Advani-Oerlikon Ltd.), worked in a capacity of Chief Manager (Training & Technical Services). He is a Qualified Trainer (welding)-Central Training Institute Mumbai, functions under the ministry of HRD Govt. of India. Qualified Forman & Supervisor - V.J.T.I. Mumbai, the Technical Education Board of Maharashtra.

Narendra H SinghChief Consultant & Trainer

Qualified Welding Inspector - Institute of Welding UK. He has also undergone an intensive successful training programme in Thermal Spraying Technology at Melbourne in Australia, organized by M/S METCO Inc. of USA.

He was honoured by the company for his outstanding performance with the most prestigious MERITORIOUS MARQUEE AWARD in 2007-08.

Ramprosad Khatik is in the field of NDT since 1993. He is a Mechanical Engineer, ASNT-(American Society for Non-Destructive Testing) Level III – in MT, UT, RT, VT, PT & NAS-(National Aerospace Specification) 410 Level III and Certified Welding Inspector, Advance course in Measuring Instrument & Measuring Instrument & QA/QC-Chennai,BARC –Level -II(RSO), Lead Auditor ISO 9001-2008

He has an experience of more than 20 years in teaching various subject of mechanical engineering related to NDT-NDE. He has worked for Design crafts India pvt.ltd NDT Lab for (Completed project RTF Jetty Area for Siepem UK Ltd. Relience Jamnagar Refinery,Bangladesh Gas Field,and various ONGC Project Oil Rigs ON-Shore/Off Shore), Welspun Gujarat Stahal Rohren Ltd – Godrej & Boyce Mfg Co.Ltd

Ramprosad Khatik Consultant & Trainer



Third party Inspection Services Third Party Inspection and total Solutions in areas of Engineering with specialization in Welding, Brazing, Soldering, Cutting, NDT & Paint –coating related issues under one roof. Inspections are based on our experience of the last 27 years. IWTT has provided solutions related to weld-engineering issues and performed failure a n a l y s i s o n c o m p o n e n t s f r o m petrochemical plants, oil and gas t ransmiss ion p ipel ines, of fshore structures, ships, pharmaceutical plants, processing equipment, gas turbine engine components, metros, aircraft, aerospace vehicles, automobiles etc.

Companies face risks every day; they are

part of normal business life. In a climate where undesirable events and missed opportunities may impact on profits and shareholder value, it is crucial to strike the right balance between risk adversity and conscious risk-taking. To do this it is essential to understand the complex picture of not only financial but also technological, environmental and social risks relevant to your company.

We add value to the general approach offered through Inspection to international standards by inviting management to identify the issues of greatest concern. The identified focus areas receive specific attention during the next audit. In this way,

we can tailor audits to focus on what is most important to your business while checking compliance with the elected standard.

You can reduce time spent reacting to events, and define your own customized path towards business improvement and sustainable growth. Let us guide you in a unique process tailored to your specific needs, focusing on what is important to you.

All management system certificates are not equal. When partnering with us, you begin the road towards continual improvement and sustainable business performance.

Consultancy Services IWTT has interacted with thousands of welders, NDT specialists, welding eng ineers and pa in t – coa t ing technologists all over the world. We are aware of the problems in manufacturing industry and the best solutions to resolve them.

We Offer Consultancy for :

?????

?

Lean Management in welding & NDT

Preparation of WPS & PQR

Failure analysis

Quality builds up activity



We consider our clients as our partners in quality management, we take pride in economic benefits that accrue to our customers from their business process and practices.


Our major clientsAt Institute of Welding & Testing Technology we consider our clients as our partners in quality management. We take pride in the economic benefits that accrue to our customers from their business processes and practices. Institute of welding & Testing Technology is a trustworthy partner to a number of large and small business houses in India and Abroad.

Training Objective:

This training is focused on non destructive techniques and non destruct ive evaluation with theory and hands on laboratory projects. Approximately two third of the training time will be spent in the laboratory. The field of NDT is very broad and an excellent balance between quality control with cost effectiveness will be achieved by means of this program.

Training Program for NDT Professional Training In NDT Level I & II Program

Certification Level I & II as per SNT-TC-1A /ASNT IV CP-189/EN473 /NAS 410 1. Leak Testing2. Liquid Penetrant Testing3. Magnetic Particle Testing 4. Visual Testing5. Eddy Current Testing6. Ultrasonic Testing7. Radiographic Testing8. Interpretation Of Radiographs9. Welding Inspection By NDT

Thank you, Customers We depend on you and your success.....

?????????????????????

ADOR Welding Limited

Bharti Shipyard

Bajaj Auto

Banco Products (I) Ltd.

Blue Star

Bombardier Transportation

Chamble Fertilizers & Chemicals

Crompton Greaves Ltd

Cummins Exhaust India

EWAC Alloys Limited

Eicher Tractors

Desmi Equipment Pvt.Ltd

DSA Electro Controls Pvt.Ltd.

Dana India Private Limited

Daulat Ram Engineering Services (P) Ltd

Hindustan Construction Company Ltd.

JSW Steel Limited

JCB

Kalyani Thermal Systems Ltd.

KLT Automotive & Tubular Products Ltd.

Kirloskar Brothers Limited

?????????????????????

Larsen & Toubro

Mahindra & Mahindra Ltd.

Mazagon Dock Limited

Mahindra Trucks & Buses Ltd.

Pari Robotics

RPG Raychem

Revti Industries Pvt. Ltd.

Rishi Laser

Siemens

Suzlon Structures Pvt. Ltd

Sulzer

Shreyas Engineers

Spartan Engineering Industries Pvt. Ltd.

Shirke Engg. & Fabrication

Tolani Shipping

Transrail Lighting Ltd.

TAFE Motors & Tractors Ltd.

HYDAC (India) Pvt. Ltd.

Taikisha Engineering India Ltd.

V E Commercial Vehicles Ltd.

YORK Transport Equipment (India)

We pride ourselves in being confidantes of over 10,000 customers since our inspection, consultancy and training, helped them solve their problems and move ahead in life. Our consultancy, training, inspection can help you too.

?

?

Welding of Aluminum, Ti., Cast Iron, Mn. Steel , Copper, Duplex Stainless Steel and special materials

Ship building. Offshore, petrochemical plants, oil and gas transmission pipelines, offshore structures, ships, pharmaceutical plants, processing equipment, gas turbine engine componen ts , met ros , a i rc ra f t , aerospace vehicles, automobiles etc.


Third party Inspection Services Third Party Inspection and total Solutions in areas of Engineering with specialization in Welding, Brazing, Soldering, Cutting, NDT & Paint –coating related issues under one roof. Inspections are based on our experience of the last 27 years. IWTT has provided solutions related to weld-engineering issues and performed failure a n a l y s i s o n c o m p o n e n t s f r o m petrochemical plants, oil and gas t ransmiss ion p ipel ines, of fshore structures, ships, pharmaceutical plants, processing equipment, gas turbine engine components, metros, aircraft, aerospace vehicles, automobiles etc.

Companies face risks every day; they are

part of normal business life. In a climate where undesirable events and missed opportunities may impact on profits and shareholder value, it is crucial to strike the right balance between risk adversity and conscious risk-taking. To do this it is essential to understand the complex picture of not only financial but also technological, environmental and social risks relevant to your company.

We add value to the general approach offered through Inspection to international standards by inviting management to identify the issues of greatest concern. The identified focus areas receive specific attention during the next audit. In this way,

we can tailor audits to focus on what is most important to your business while checking compliance with the elected standard.

You can reduce time spent reacting to events, and define your own customized path towards business improvement and sustainable growth. Let us guide you in a unique process tailored to your specific needs, focusing on what is important to you.

All management system certificates are not equal. When partnering with us, you begin the road towards continual improvement and sustainable business performance.

Consultancy Services IWTT has interacted with thousands of welders, NDT specialists, welding eng ineers and pa in t – coa t ing technologists all over the world. We are aware of the problems in manufacturing industry and the best solutions to resolve them.

We Offer Consultancy for :

?????

?

Lean Management in welding & NDT

Preparation of WPS & PQR

Failure analysis

Quality builds up activity



We consider our clients as our partners in quality management, we take pride in economic benefits that accrue to our customers from their business process and practices.


Our major clientsAt Institute of Welding & Testing Technology we consider our clients as our partners in quality management. We take pride in the economic benefits that accrue to our customers from their business processes and practices. Institute of welding & Testing Technology is a trustworthy partner to a number of large and small business houses in India and Abroad.

Training Objective:

This training is focused on non destructive techniques and non destruct ive evaluation with theory and hands on laboratory projects. Approximately two third of the training time will be spent in the laboratory. The field of NDT is very broad and an excellent balance between quality control with cost effectiveness will be achieved by means of this program.

Training Program for NDT Professional Training In NDT Level I & II Program

Certification Level I & II as per SNT-TC-1A /ASNT IV CP-189/EN473 /NAS 410 1. Leak Testing2. Liquid Penetrant Testing3. Magnetic Particle Testing 4. Visual Testing5. Eddy Current Testing6. Ultrasonic Testing7. Radiographic Testing8. Interpretation Of Radiographs9. Welding Inspection By NDT

Thank you, Customers We depend on you and your success.....

?????????????????????

ADOR Welding Limited

Bharti Shipyard

Bajaj Auto

Banco Products (I) Ltd.

Blue Star

Bombardier Transportation

Chamble Fertilizers & Chemicals

Crompton Greaves Ltd

Cummins Exhaust India

EWAC Alloys Limited

Eicher Tractors

Desmi Equipment Pvt.Ltd

DSA Electro Controls Pvt.Ltd.

Dana India Private Limited

Daulat Ram Engineering Services (P) Ltd

Hindustan Construction Company Ltd.

JSW Steel Limited

JCB

Kalyani Thermal Systems Ltd.

KLT Automotive & Tubular Products Ltd.

Kirloskar Brothers Limited

?????????????????????

Larsen & Toubro

Mahindra & Mahindra Ltd.

Mazagon Dock Limited

Mahindra Trucks & Buses Ltd.

Pari Robotics

RPG Raychem

Revti Industries Pvt. Ltd.

Rishi Laser

Siemens

Suzlon Structures Pvt. Ltd

Sulzer

Shreyas Engineers

Spartan Engineering Industries Pvt. Ltd.

Shirke Engg. & Fabrication

Tolani Shipping

Transrail Lighting Ltd.

TAFE Motors & Tractors Ltd.

HYDAC (India) Pvt. Ltd.

Taikisha Engineering India Ltd.

V E Commercial Vehicles Ltd.

YORK Transport Equipment (India)

We pride ourselves in being confidantes of over 10,000 customers since our inspection, consultancy and training, helped them solve their problems and move ahead in life. Our consultancy, training, inspection can help you too.

?

?

Welding of Aluminum, Ti., Cast Iron, Mn. Steel , Copper, Duplex Stainless Steel and special materials

Ship building. Offshore, petrochemical plants, oil and gas transmission pipelines, offshore structures, ships, pharmaceutical plants, processing equipment, gas turbine engine componen ts , met ros , a i rc ra f t , aerospace vehicles, automobiles etc.

Training & Certification for Resistance WeldersTraining Objective:

Addressing the future shortage of skill – Qualified welding and joining technicians.

To produce high quality welds by resistance welding. During training and certification discuss on weld controls, timing diagrams, input/output connec-tions, parameters, techniques, controls and applications. This training provides the student with thorough understanding of welding and weld quality, necessary skill to produce quality welds.

Certification of resistance welder as per ASME Section IX / DIN ISO 15614-12 for spot, seam and projection welding and for Arc stud welding EN ISO 14555

Special training and certification for following process Resistance spot welding

Projection welding

Resistance seam welding

Electric resistance butt seam welding [ERW]

High frequency resistance welding [HFRW]

l

l

l

l

l

l

l

l

l

l

l

High frequency Induction welding [HFIW]

Resistance butt welding

Flash butt welding

Aluminum and Aluminum alloys

Stainless steel and Duplex Stainless steel

Automobile applications

Guide specification and guidance for

7INSTITUTE OF WELDING & TESTING TECHNOLOGY™

Certified Robotic Arc Welding

Training Objective: Robotic arc welding technicians or operators certification

Welding robots have been used by the manufacturing industry since 1970’s, in the form of mechanized welding processes.

Certification Program for Robotic Arc Welding - Operators and Technicians

The skill of the specially qualified personnel drives the success of robot welding and optimizing the high quality output. AWS has also recognized the need of certified individuals in robotic arc welding for the quality through put in the industry.

Based on the AWS QC 19 standard and AWS D16.4 specification

Institute is thrilled to offer the brand new Certification Program for Robotic Arc Welding - Operators and Technicians. This certification allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation. It also

signifies that the train operator or Technician has demonstrated the capability of working with various codes, standards, and specifications. Since proof of active practice or re-examination is required every year.

1. Operator: basic knowledge of robot operation & station, how to operate robot & station.

2. Robot teacher: Teaching funda-mentals, welding angles, Basic Robot instructions

3. Robot programmer: Expert teaching, Modifications in program, creating program.

6 INSTITUTE OF WELDING & TESTING TECHNOLOGY™

Training & Certification for Arc WeldersTraining Objective:

Addressing the future shortage of skill – Qualified welding and joining technicians,

To produce high quality welds by Arc welding. During training and certification discuss on weld quality, advantages, limitation of process, selection of welding power source , selection of welding consumable, parameters, techniques, controls and application. This training provides the student with thorough understanding of welding and weld quality Necessary skills to produce quality welds

This training is focused on New Technology and enhance knowledge of all engineers and managers , welding technology has made rapid progress in last 10 to 12 years and it is very much essential to keep ourselves updated with new technology.

This training and seminar is aimed to enhance the participants knowledge to Understand the factors which influence the quality and cost of fusion welds,l commonly used welding processes, Interpret drawing with instruction and weld symbols, New welding codes / Standard / Specification, New welding and Cutting equipment, Cost of the weld, Nanotechnology applicable to welding

Training & Certification for Engineers & Managers

1F /2F /3F/4F / 1G/ 2G/ 3G/ 4G/ 5G/ 6G/ 6GR.or L-45, PA/ PB/ PF/ PG/ PD/ PA/ PC/PE/H-LO45

Certification of Arc welders as per ASME Section IX / DIN ISO9606 -1 or EN 287-1for all arc welding process.

Special training and certification for following process

SMAW /MMAW welding

GMAW[MAG/MIG] welding

GTAW [TIG] welding

FCAW welding

SAW welding

?????

Our Mission is safe and sustainable weld quality

?

????

?

????

????

?

Diploma in Welding & Test ing Technology

Welding Inspector - Level -II

Welding Design for Design Engineers

Welding metallurgy for Non Metallurgist

Repair and Maintenance welding for Sr. maintenace Engineers

R o b o t i c O p e r a t o r Tr a i n i n g & Certification program

Welding Auditor for ISO 3834-2

ASME Section IX

Welding Sales and Marketing personnel

Welding & NDT for Third Party Inspector and Surveyor

Painting & Coating Inspector

Lean Management In Welding

Welding & NDT for Managers

Repair and Maintenance for Marine Engineers

Cutting Metal Removal Technology

A “Not-to-be-Missed” Opportunity for building

your career and your company's Growth.

Specification and guidance for hands - on welding with

??

???



Ti alloys welding

Copper welding

Overlay applications



Training & Certification for Resistance WeldersTraining Objective:

Addressing the future shortage of skill – Qualified welding and joining technicians.

To produce high quality welds by resistance welding. During training and certification discuss on weld controls, timing diagrams, input/output connec-tions, parameters, techniques, controls and applications. This training provides the student with thorough understanding of welding and weld quality, necessary skill to produce quality welds.

Certification of resistance welder as per ASME Section IX / DIN ISO 15614-12 for spot, seam and projection welding and for Arc stud welding EN ISO 14555

Special training and certification for following process Resistance spot welding

Projection welding

Resistance seam welding

Electric resistance butt seam welding [ERW]

High frequency resistance welding [HFRW]

l

l

l

l

l

l

l

l

l

l

l

High frequency Induction welding [HFIW]

Resistance butt welding

Flash butt welding



Automobile applications

Guide specification and guidance for

7INSTITUTE OF WELDING & TESTING TECHNOLOGY™

Certified Robotic Arc Welding

Training Objective: Robotic arc welding technicians or operators certification

Welding robots have been used by the manufacturing industry since 1970’s, in the form of mechanized welding processes.

Certification Program for Robotic Arc Welding - Operators and Technicians

The skill of the specially qualified personnel drives the success of robot welding and optimizing the high quality output. AWS has also recognized the need of certified individuals in robotic arc welding for the quality through put in the industry.

Based on the AWS QC 19 standard and AWS D16.4 specification

Institute is thrilled to offer the brand new Certification Program for Robotic Arc Welding - Operators and Technicians. This certification allows many welding personnel employed in various welding sectors to measure themselves against standards for their occupation. It also

signifies that the train operator or Technician has demonstrated the capability of working with various codes, standards, and specifications. Since proof of active practice or re-examination is required every year.

1. Operator: basic knowledge of robot operation & station, how to operate robot & station.

2. Robot teacher: Teaching funda-mentals, welding angles, Basic Robot instructions

3. Robot programmer: Expert teaching, Modifications in program, creating program.


Training & Certification for Arc WeldersTraining Objective:

Addressing the future shortage of skill – Qualified welding and joining technicians,

To produce high quality welds by Arc welding. During training and certification discuss on weld quality, advantages, limitation of process, selection of welding power source , selection of welding consumable, parameters, techniques, controls and application. This training provides the student with thorough understanding of welding and weld quality Necessary skills to produce quality welds

This training is focused on New Technology and enhance knowledge of all engineers and managers , welding technology has made rapid progress in last 10 to 12 years and it is very much essential to keep ourselves updated with new technology.

This training and seminar is aimed to enhance the participants knowledge to Understand the factors which influence the quality and cost of fusion welds,l commonly used welding processes, Interpret drawing with instruction and weld symbols, New welding codes / Standard / Specification, New welding and Cutting equipment, Cost of the weld, Nanotechnology applicable to welding

Training & Certification for Engineers & Managers

1F /2F /3F/4F / 1G/ 2G/ 3G/ 4G/ 5G/ 6G/ 6GR.or L-45, PA/ PB/ PF/ PG/ PD/ PA/ PC/PE/H-LO45

Certification of Arc welders as per ASME Section IX / DIN ISO9606 -1 or EN 287-1for all arc welding process.

Special training and certification for following process

SMAW /MMAW welding

GMAW[MAG/MIG] welding

GTAW [TIG] welding

FCAW welding

SAW welding

?????

Our Mission is safe and sustainable weld quality

?

????

?

????

????

?

Diploma in Welding & Test ing Technology

Welding Inspector - Level -II

Welding Design for Design Engineers

Welding metallurgy for Non Metallurgist

Repair and Maintenance welding for Sr. maintenace Engineers

R o b o t i c O p e r a t o r Tr a i n i n g & Certification program

Welding Auditor for ISO 3834-2

ASME Section IX

Welding Sales and Marketing personnel

Welding & NDT for Third Party Inspector and Surveyor

Painting & Coating Inspector

Lean Management In Welding

Welding & NDT for Managers

Repair and Maintenance for Marine Engineers

Cutting Metal Removal Technology

A “Not-to-be-Missed” Opportunity for building

your career and your company's Growth.

Specification and guidance for hands - on welding with

??

???



Ti alloys welding

Copper welding

Overlay applications



DIN EN ISO 9001-2008 CERTIFIED INSTITUTE303/304/305 Laxmi Industrial Estate, Penkar pada, Off. W.E.Highway, Near Dahisar Checknaka, Mira Road, Thane -401 104, INDIA

Web: www.weldingtesting.org • Email: [email protected], [email protected] • Mob. +91 98922 63850, 98690 21461, +91 22 2896 7969

INSTITUTE OF WELDING & TESTING TECHNOLOGY™


The institute is truly the only specialist of international stature that has concentrated on prolonging the service life of machine parts and equipment. Institute technicians have developed welding skill and techniques that also increase industry productivity and profitability by the reduction of downtime and spare part inventories.

Institute is ready with all

1. Welding process equipments with accessory's

2. Welding Technology for Aluminum, Copper, Titanium, Cu+Ni Alloys, Cast Iron, Cast Steel, Stainless Steel, Duplex Steel etc

3. Repair and Maintenance technology of Engine block, Gears ,Dies, Machine bases, Foundry defects, Overlaying, RPR Cement, Rotary kiln, Heat treatment equipment, Earthmoving equipment, Cryogenic equipment, Shovel etc

4. Pre qualified WPS & PQR

5. Skill welders and qualified experience inspectors

6. Selection of welding consumables from reputed manufacturer

7. In-house lab testing facility with Macro / UTM /Hardness testing / Impact teting / chemical composition / UT/RT/MT/PT

Job work division with total solution[Repair and Maintenance welding shop 24 x 7]

In House Metallurgical and NDT Lab

Documents

INSTITUTE OF WELDING & TESTING TECHNOLOGY™ · PDF fileINSTITUTE OF WELDING & TESTING TECHNOLOGY ... TWI (Cambridge - UK) Certified Welding Inspector, ... opportunities may impact