Installationsanleitung DDS-CAD 10 DVD international 26062014 · Welcome to DDS! Our complete team is very excited to present DDS-CAD 10 and wel-come you as a user of one of the most

DDS-CAD 10Installation manual

Welcome to DDS!

Our complete team is very excited to present DDS-CAD 10 and wel-come you as a user of one of the most advanced BIM solutions cur-rently on the market. For over 30 years, DDS has been a market leader in Open BIM and model based design software for MEP engineers. With many intelligent and automated features, a highly flexible and intuitive user interface, DDS-CAD 10 assures an uncompromising de-sign efficiency.

Do not wait any longer, install the software now and experience the full potential of DDS-CAD yourself.

As a partner, DDS is here to assist you. This begins with the instal-lation and extends beyond daily design questions, project support, individual training and further product development. A highly quali-fied team of technicians and engineers with practical experience are directly at your disposal whenever you have any questions.

Discover the power of DDS-CAD 10 - for your success!

Your DDS team

Table of Contents

1. Installation and tools 1.0 Preliminary remarks 41.1 Local installation 51.2 Network installation 61.3 Tools 7

2. Local installation – new installation

2.1 Starting the installation procedure 82.2 Parallel installation to DDS-CAD 9 142.3 No parallel installation to DDS-CAD 9 15

3. Local installation – update existing DDS-CAD 10 version 3.1 Starting the installation procedure 163.2 Repair program 173.3 Modify program 18

4. Network installation 4.1 Preparations 214.2 Setup configuration 234.3 Run setup on workstations 29

5. Update Dongle 5.1 Local dongle 315.2 Network dongle 32

6. System Requirements 33

4 | Installation and tools

1. Installation and Tools

1.0 Preliminary remarks

The installation of DDS-CAD, as well as for the additional tools, requires administrator rights. In addition, please close all programs before starting the installation and disable your virus scanner.

For DDS-CAD the installation types “local” and “network” are avail-able. The desired installation type can be selected in the installation menu. The setup DVD also contains several tools (additional applica-tions).

1. Local installation2. Network installation3. Tools

Installation and tools | 5

1.1 Local installation

Use this method if you would like to install DDS-CAD locally on a sin-gle workstation or want to install the software on multiple worksta-tions in a network.

It is irrelevant whether:

• Theworkstationhasalocalharddiskorisconnectedviaaterminal server• Thedataismanagedlocallyoronanetwork• Theavailablelicenseisalocalornetworkdongle

6 | Installation and tools

1.2 Network installation

The network installation can be used to save time. Use this option if you intend to install DDS-CAD on multiple workstations in a network at the same time.

Installation and tools | 7

1.3 Tools

The installation DVD contains several additional tools that can be in-stalled:

Installing the dongle server is only required in case of a new installa-tion and if licensing is done through a network dongle. Run the setup on the computer that will be used as a dongle server.

Do not install the dongle server if:

• IfyouhavealocalUSBlicenseforyourworkstation•ADDS-CADnetworkdongleisalreadyinuse(e.g.forexistinginstal- lations)

To create PDF files in DDS-CAD you can install the PDF printer “PDFCreator”.The tool “Install License Update” is used by DDS support during re-mote admin when update issues have occurred.

8 | Local installation – new installation

2. Local installation - new installation

Please note:When installing DDS-CAD for the first time the dongle should not be inserted before starting the installation procedure. After completing the installation a restart of the computer is required, afterwards you can insert the dongle.

2.1 Starting the installation procedure

After you have inserted the DVD, the installation process will start au-tomatically. If the installation does not start, open Windows Explorer and run the “Install.exe” from the DVD.

Select a market and language for DDS-CAD and confirm with “OK”:

Select “Start Installation”:

Local installation – new installation | 9

The Installation Wizard starts. Please follow the recommendation and close all windows and other applications. Also disable your virus scan-ner for the duration of the installation of DDS-CAD. To install DDS-CAD click “Next”:

Enter your user name and company name and indicate for which us-ers DDS-CAD should be installed:


In the following dialog, the locations for installing the program, user folder and project folder are proposed. You have the option to change these locations in this dialog.

The locations relate to the following questions:

• Inwhichfoldershouldthesoftwarebeinstalled?• Whereshoulduserdatabestored(i.e.companylogo,ownproducts, symbols,settings,etc)?• Inwhichfoldershouldprojectsbestored(e.g.networkorlocalloca- tion)?• SinceitconcernsanewDDS-CADinstallation,nodatacanbecopi- ed from an existing User folder

If your projects or user data should be stored on the network, the net-work folder must be connected to a network drive on your computer. DDS-CAD does not support UNC paths (server share e.g. \\Server-name\folder\) in all functions. Therefore, we recommend not using them.

Enter the correct locations or use the default folders and press “Next”.

Please note:If you use Microsoft Windows Vista or newer, you may not use or create the folders for user files and projects in the DDS program path (C:\Programfiles\DDS\...). Microsoft Vista and newer versi-ons of Windows do not provide direct write access to the Program folders.


Select the setup type “Complete” for a full installation of DDS-CAD:

When you select the setup type “Custom” you can select whether the modules “Crystal Reports” and “Polysun Inside” have to be installed. When deselecting the module “Crystal Report” DDS-CAD cannot cre-ate reports (e.g. output of calculation results and part lists). The mod-ule “Polysun Inside” is used for calculating the yield of PV systems:


Select which shortcuts you would like to have installed and press “Next”:

The setup is now ready to install DDS-CAD. Select “Install” to start the installation procedure. To change or check the settings you have se-lected, use “Back”.


After successfully completing the DDS-CAD installation you can close the dialog by pressing “Finish” and restart your computer:

After the restart you can insert the USB dongle in the computer. The USB dongle will be automatically recognized; afterwards you can launch DDS-CAD and update your dongle if required (see chapter 5).


2.2 Parallel installation to DDS-CAD 9

If you want to continue working on projects that have been created in DDS-CAD 9 in version 10, you need to specify a new location for the project and user folder.

Please note:You cannot refer to the folder locations that are used by DDS-CAD 9.

The user data from DDS-CAD 9 can automatically be copied to the new folder locations for DDS-CAD 10.

To do so, activate the check box “Copy to DDS-CAD 10”:


2.3 No parallel installation to DDS-CAD 9

In case you would like use separated user data exclusively for DDS-CAD 10, you can specify a new location for your user folder. The project folder location can be similar to the one used for DDS-CAD 9.

Please note:Project that are opened in DDS-CAD 10, cannot be opened any-more in an older version of DDS-CAD.

16 | Local installation – update existing DDS-CAD 10 version

3. Local installation - update existing DDS-CAD 10 version

3.1 Starting the installation procedure

After you have inserted the DVD, the installation will start automati-cally. If the installation procedure does not start automatically, open Windows Explorer and run the “Install.exe” from the DVD.

Select a market and language for DDS-CAD and confirm with “OK”:

Select “Start Installation”:

Local installation – update existing DDS-CAD 10 version | 17

The installation wizard will start and takes you through the steps for making changes to the existing installation:

3.2 Repair program

To reinstall DDS-CAD with the settings and modules selected previ-ously, select the option “Repair” and click “Next”:


After successfully completing the installation of DDS-CAD you can close the dialog by pressing “Finish” and restart your computer:

3.3 Modify program

When selecting the option “Modify” you can select to install the mod-ules “Crystal Report” and “Polysun Inside”:

Local installation – update existing DDS-CAD 10 version | 19

The module “Crystal Report” is used by DDS-CAD for creating reports (e.g. calculation results and parts list). The module “Polysun Inside” is required for making yield calculations for PV systems:

To conclude, select where and which shortcuts should be created:


After successfully completing the installation of DDS-CAD you can close the dialog by pressing “Finish” and restart your computer:

After the restart you can insert the USB dongle in the computer. The USB dongle will be automatically recognized; afterwards you can launch DDS-CAD and update your dongle if required (see chapter 5).

Network installation | 21

4. Network installation

4.1 Preparations

After you have inserted the DVD, the installation will start automati-cally. If the installation procedure does not start automatically, open Windows Explorer and run the “Install.exe” from the DVD.

Select the tab “Network” and select “Copy to Drive”:

Select “Next”:

22 | Network installation

Enter the location to which the setup data should be copied:

At the location a copy of the DVD setup is created, which can be used for installing the software on workstations in the network:


After completing the copy procedure select “Finish”:

4.2 Setup configuration

Once the setup data has been copied to the destination folder, the network setup dialog will be displayed again. To create the required setup configuration for the workstations select “Record Setting”:

The process simulates a setup procedure in which all settings are stored for a subsequent installation, however, no files are copied.


Select “Next”:

Enter your user name and company name and indicate for which us-ers DDS-CAD should be installed:


Select the option for network installation and select “Next”:

In the following dialog the setup type “Company” suggests a single location for the installation of the required files. You have the possibil-ity to change the locations in this dialog.


The locations relate to the following questions:

• Inwhichfoldershouldthesoftwarebeinstalled?•Whereshoulduserdatabestored(e.g.companylogo,ownproducts, symbols,settings,etc)?• Inwhichfoldershouldprojectsbestored?• TocopytheuserfolderfromapreviousversionofDDS-CADandspe- cify its location.

If you select the setup type “School”, the locations for the program and configuration files are proposed. You have the possibility to change the locations in this dialog.


Select the setup type “Complete” for a full installation of DDS-CAD:

When you select the setup type “Custom” you can choose whether the modules “Crystal Reports” and “Polysun Inside” have to be installed. When deselecting the module “Crystal Report” DDS-CAD cannot cre-ate reports (e.g. output of calculation results and parts lists). The mod-ule “Polysun Inside” is used for calculating the yield of PV systems:


Select which shortcuts you would like to have installed and press “Next”:

Click “Finish” to conclude the simulated setup process and close the installation menu:


4.3 Run setup on workstations

To install DDS-CAD on each workstation, run the file “SilentInstall.exe” on the server:

Depending on the selected options, an appropriate dialog is displayed or the setup runs without any dialogue in the background.


After successfully completing the installation procedure please re-start the computer:

Update Dongle | 31

5. Update Dongle

5.1 Local dongle

After the first start of DDS-CAD 10 the dialog “License check failure” appears:

The USB dongle is automatically recognized, however, has not yet been activated for DDS-CAD 10. A dongle update is required. To do so, Click “Update”.

Enable the radio button next to “From Internet” and select “OK”:

32 | Update Dongle

Again, confirm with “OK”:

The dongle update is executed; DDS-CAD 10 will start automatically afterwards.

5.2 Network dongle

The network dongle must be removed from the server and can be plugged into a computer running a local installation of DDS-CAD. To update the network dongle, follow the procedure as described in the previous section “Local Dongle”.

System Requirements | 33

6. System requirements

Operating System•Windows7Professional(SP1orhigher)64bit•Windows8Professional64bit•Windows8.1Professional64bit

Server OS for Dongle Server•MSWindows2003Serverorhigher

Internet Browser • InternetExplorer7orhigher

CPU • EqualAMDDualCoreCPUwith2,0GHzorhigherandSSE2

Memory(RAM):4GB

Display • Resolutionof1280x1024TrueColor

Graphic card (GPU) •OpenGL,512MBVRAM,noonboardgraphicscard

Harddisk(HDD):15GBoffreespace

Optical Drive: DVD

Mouse: 3 Button scroll wheel mouse Keyboard: MS compatible Other • Internetconnectionforupdates• 1xUSB2.0/3.0portfordongle

See www.dds-cad.com/system-requirements/ for more detailed in-formation on minimal and high-end requirements.

Notes

Notes

Windows Vista (SP2 or higher),Windows 7 (SP1 or higher), 32 or 64 bit (x86 or x64),Windows 8, 32 or 64 bit (x86 or x64)Windows 8.1, 32 or 64 bit (x86 or x64)

Data Design System ASØksnevad Næringspark4353 Klepp StasjonNorway

[email protected]

Documents

Installationsanleitung DDS-CAD 10 DVD international 26062014 · Welcome to DDS! Our complete team is very excited to present DDS-CAD 10 and wel-come you as a user of one of the most