...automatically better!

L1048

K18088

88

85

85

88

85

85

85858585858585858585

L1048L1048 Rudolstadt

Volkstedt

Bad

BlankenburgSaalfeld

ErfurtJena

Ilmenau Schwarza

Schaala

Electric andAutomation

Systems GmbH

Installation

Service

MATEC

Elektro- und Automatisierungsanlagenbau GmbHFriedrich-Adolf-Richter-Straße 5

07407 Rudolstadt

www.matec-online.com

Tel.: +49 (0) 3672 4676 0

Fax: +49 (0) 3672 4676 222

E-Mail: firma@matec-online.com

Weimar

Complete scope of delivery and services also means professional

assembly of all delivered equipment.

The installation and replacement of measuring instruments,

the installation of complex cable carrier systems,

the laying and connection of cables and control air hoses up

to the participation in the loop check are among our services.

Partnerships for a solid foundation.

Electrical installations for industry require a high level of experience

and flexibility. Here we rely on the expertise of our partners.

Project-related training courses (system handling and maintenance)

Plant maintenance

Maintenance contracts

Remote maintenance (PLC and control systems)

Standby or on-call-service

Service … within the idea of service, this word also means

assistance. Assistance for our customers also after the system

was handed over.

Customer Service:

Your way to us

Basic Engineering

Detail Engineering

Construction of Switch Cabinets

Installation

Construction Supervision

Commissioning

Service

Constructionof Switch Cabinets

Basic Engineering Detail Engineering

Loop Check

Process engineering and conceptual design from

process engineering and technological conditions

First cost estimate as basis for investment decision

Development of a task

Plant identification structure

(e. g. KKS – Identification System for Power Plants)

Definition of the different measuring principles

Determining and defining electrical consumers

Panel arrangement drawings

Control cabinet arrangement planning

Develop risk classification and safety concepts

Creating of function diagrams for the control system

Basic engineering is the starting point of every planning phase.

We evaluate the feedback from the consultations with our customer

and act on the results. We build a solid foundation for your project.

Whether it concerns local control stations and signal acquisition,

control cabinets, complete switchgears or server cabinets -

we provide one-stop solutions! Produced and tested to satisfy

the task-specific requirements. Adherence to all national and

international regulations and standards in force and compliance

with customer specifications reigns supreme throughout our processes.

We conduct a factory acceptance test and record the results to

document that the switchboards and/or complete switchgears and

the process control equipment operate according to the specifications.

We have implemented an ISO 9001:2015 compliant quality

management system at all stages of our production processes

Measurement | Regulation | Control

Specify, layout and calculation of measurement instruments,

evaluation devices, control valves and other system components

Data sheets, lists, hook-ups and regulations and instructions

for installation

Requirement specification

Detailed risk- and safety analysis

Continuous revision management

Retrofit | Migration | Optimization

Concept development for plant optimization

Transfer, extending and migration of existing systems

Migration/ Upgrade of controlling systems, visual display systems

and distributed control systems

Control Programs | Visualization

Control concepts with central and/ or decentral signal recording

VGB conform signal recording

Control programs and visualization with Step7, TIA, WinCC, PCS7,

DigiVis, CoDeSys, HIMA-ELOP, DigiTool, ControlBuilder F, CITEC,

INTOUCH, B&R Automation Studio, FlowChief,

Rockwell/ Allen Bradley Studio 5000 and FactoryTalk View SE

Connection to MES and ERP systems

Electrical Engineering

Medium voltage and low voltage systems (TSK, PTSK, MCC)

Emergency power systems (emergency power, UPS), transformer plants

General electrical installations in commercial and public areas

Tender and final planning documents according to HOAI

Construction SupervisionCommissioning

We will not leave you alone!

Practically oriented employees translate their knowledge and experience

into our projects. Our equipment is used in countries all over the world,

our operators communicate in English and Russian.

Construction Supervision | Commissioning

Supervision of project implementation to ensure that the services

supplied are in conformity with the contract and that the generally

accepted engineering standards as well as all relevant

regulations are met.

Coordination between the parties involved in the project

Contact partner for the customer or its construction management team

Constant presence at the construction site

First port of call if problems arise

Schedule monitoring

Keeping of daily construction records

Project handover to the customer, together with all documents such

as Operating Manuals, test protocols, etc.

Loop check during or after the assembly operations

Inspection of all cross connections inside the switchgears

Inspection of all connections on switchboards and external devices

Functional check of all loops

Commissioning

Commissioning of measuring equipment and automation devices

Testing of all hardware locks

Testing of all I/O levels of the automation devices

Functional Test

Commissioning of all software components, software function tests

Adjustment of all measuring equipment and automation devices in

cooperation with the customer or the company operating the equipment

Adjustment of control parameter and limit values

Testing of all automation systems

Trial Operation

Testing for interactions between mechanical and electrical components

Optimisation of the individual control programs

Adjustment of the measuring and automation devices under

production conditions in cooperation with the customer/the company

operating the equipment

Factory Planning

Complete and approved documentations supporting medium and

low-voltage electric power and automation systems - including circuit

diagrams, terminal and cable lists and switch panel arrangement

drawings (EPLAN, ELCAD)

Extending and migration of existing documentations