Installation video : http://www.youtube.com/watch?v=dy0td4wITFo&feature=related

For getting the needed activation code it is important that we receive your complete

filled in form what you can download at our website: http://www.rian-

bv.eu/products.php?type_id=56 and the advanced payments are made. In foreign

countries the advanced payments are for the time of subscription, at least 3 months for Professional PDN or one year for consumer subscriptions.

We sent the activation code by e-mail or SMS.

Before you begin with the installation:

Choose http://finder.tooway-instal.com/fixe/pages/index.html and select the place where

the system shall be installed, all necessary technical information will be showed on the

screen.

Check in advance if the direction you need for reception of 9 East is free of obstacles or

choose a different location. Also see if there is possible distortions’ issue like a GSM

transmitter, and if so place the dish on an other side of the house so the house is between the dish and the distortion.

Find as close as you can the position 9 East, or if you have the dish pointer, set the dish

in the direction of the blue arrow on the satfinder. That is 174,78 as from the north, 5.22

East starting of exactly the south. Put the dish pointer exact in the middle of the Tooway logo at the Tooway Dish.

Align the dish pointer with both water marks horizontal and turn the dish until the sun

gives a line at the correct time on the scale. (Depending of the month) Look

for the correct procedure the film on http://www.dishnavigator.com/ the dish is now for 99% in the correct direction.

Align the elevation on 31.82 by means of the scale partitioning on the side of the Mount.

The inside part of the Mount, which can be seeing true the hole, is the marker for the

angle. Use if possible an angle measure equipment, how more closely the angle how

Go to: http://www.dishpointer.com/

Give your position or city and search for 9e Euro bird 9A KA sat.

Be aware that the 2 arms from the dish are aligned with the 4 bolts at the backside on

the circle with degrees that is given as LNB Skew [?] on the screen from the internet.

The arrow on the screen is given the direction seen from the backside of the dish , so like

on this example you need to turn the dish around its axis to the left, or like on this picture at the front : to the right !!!.

Connect the coaxial cable to the TX connector (at the earth screw) from the Tria (BUC)

and your modem. Connect the modem with the blue UTP cable to your laptop.

Check your computer for DHCP ; start – configuration screen - network en internet –

network status - lan connection – properties – internet protocol version 4 – properties – automatic assign a IP address.

Start the Internet browser. Tap in the browser 192.168.100.1 /install and follow the instructions.

Choose the spot you need and has found at KA sat finder, (in this case 1) and go to the

installation mode. Go further with fine adjusting the dish; the lnb (Tria-BUC) in the dish

gives a low intermitted beep. Adjust the dish carefully until the beep become constant

and highest of frequency (tone altitude). Then turn the brackets fixed on the mast and

use the left side fine adjust to adjust the dish direction optimally on the highest tone. Use the right fine adjusts to maximise the elevation and fixes all brackets.

Check all alignments once again, possibly correct something and enter the home.

Finish alignment on the laptop and get 192.168.100.1 on the browser to see if all is OK.

If one of these is not green you must check the cable, the Tria or the modem.

While doing this the upper led on the modem should burn now and 2nd led of the modem

must blink. These led must be burning after a time also, which can last sometimes. But

these led must burn ALWAYS on and not flashing. As long as the 2nd led not is

continuously burning, you start up again because the dish position is not good. As soon

as the 2nd led is burning continuously, the 3rd led must blink as a sign that reception is done and the modem is sending.

All can be checked:

You can see that the modem is ranging, the satellites at the right corner are moving. As

soon as the modem has find the exact frequencies, a software download is being done,

this could be take a long time, DON’T SHUT OFF THE MODEM AT THIS TIME!!! Otherwise

you come into a loop and start up again every time and it looks like the modem is defect.

Leave the modem until the ranging is done and the modem status has three green dots:

reception-sending and the network. Only the last dot is orange. Not because of our

football team, but because the activation is not done yet, and there is an IP address, but no internet!

As soon as this happens and all 4 leds are burning continuously, start up the laptop again

so that you get this new IP address. The Internet browser starts on and if everything is

well You come automatically in an activation application site from Skylogic . Now the Ethernet led 4 and 3e the led together will blink.

When you are convinced that you have the right subscription, ( B2B all Gates are open

and have a fixed IP address, and consumer subscriptions have not ) you can start with the activation of the modem.

Our provider range is always 993 for consumers and 1256 for professional subscriptions. Fill in your code and finish the procedure and again starts up the laptop.

W

Now you should have Internet, if not start up your laptop again.

If your modem is not responding anymore you need to cut of power for more than 5

minutes and then put it on again.

Use First choice : Firefox web browser.

If You do not come automatically in the activation page, then go to http://172.20.80.64.

Use http://checkportal.skylogicnet.com for control, of your alignments direct on your

laptop, and for control the used amount of data and for doing a speed test. All other speedtest are not working !!!!!

IF YOU ALIGNED THE DISH PERFECTLY, BUT HAVE DOUBT ABOUT THIS, DO NOT MAKE

OVER ALL TEH ALIGNEMNET, BUT STARTS WITH 192.168.100.1/INSTALL AND KEEP

YOU’RE HAND A FEW SECONDS FOR THE TRIOA, AND THEN THE BEEP WILL BE THERE, AND CONTROL IS EASY BY FORCING THE DISH A LITTLE.

aaaa