INSTALLATION SYSTEMS - Madavimadavi.ir/img/products/catalouge/General Catalogue 2018...Installation Systems Installation Systems 344 Installation channel MM-C-16 Technical data Material

INSTALLATION SYSTEMS

338www.hilti.group

Insta

llati

on

S

yste

ms

Installation Systems

Channel Systems

Installation channel MM-C-16 Page 344 Installation channel MM-C-30 Page 344 Installation channel MM-C-36 Page 345 Installation channel MM-C-45 Page 345 Bracket MM-B-30 Page 345,346 Bracket MM-B-36 Page 346 Angle brace MM-AB Page 346 Pipe ring saddle MM-S Page 347 Wing nut MM-WN Page 347 Angle MM-A-90 Page 348 Angle MM-AH-90 Page 348 Rail support MM-R-16-36 Page 349 Beam clamp MM-T-16-36 Page 349 Channel washer MM-CW Page 349,350 Channel end cap MM-E Page 350 Rubber inlay MM-RI Page 350,351 Installation channel MQ-21 Page 353 Installation channel MQ-41 Page 353 Installation channel MQ-41/3 Page 353 Installation channel MQ-52 Page 354 Installation channel MQ-72 Page 354 Installation channel MQ-21 D Page 354 Double installation channel MQ-41 D Page 355 Double installation channel MQ-52-72 D Page 355 Double installation channel MQ-124X D Page 355 Bracket MQK-21 Page 356 Bracket MQK-41 Page 356 Bracket MQK-72 Page 356 Angle brace MQK-S Page 357 Channel connector MQN Page 357 Wing nut MQM Page 357 Solid wing nut MQM Page 358 Pipe ring saddle MQA Page 358 Pipe ring saddle MQA-B Page 358 Preassembled angle MQW-Q2 Page 359 Angle MQW 90° Page 359 Angle MQW 45°/135° Page 360 Angle bracket MQW-S Page 360 Connector 2-D MQV-2D Page 360,361 Connector 3-D MQV-3D Page 361 Channel tie - flat MQV Page 361 Channel tie MQV Page 362 Channel tie MQV-12 Page 362 Rail support MQV-2/2 D Page 362 Rail support MQP-1 Page 363 Rail support MQP-45 Page 363 Rail support MQP Page 363,364 Pivot base MQP Page 364 Universal joint MQP-U Page 364 Beam clamp MQT Page 365 Clamping claw MQT Page 365 Clamp (channel to channel) MQB Page 365,366 Clamp (channel to concrete) MQB Page 366 Drilled plate MQZ-L Page 366 Installation washer MQZ-U Page 367 Channel tie, shear brace MQZ Page 367 Channel end cap MQZ-E Page 367-368 3D-system MQ3D Page 370 Installation channel MC-3D-41 Page 370 Installation channel MC-72 Page 370 Bracket MC-B-3D-41 Page 371 Electrical bracket MC-BE Page 371 Longitudinal channel connector MC-CL Page 371 Base connector MC-CB Page 372 Angle MC-A-90 Page 372 Height-adjustable angle MC-AH-90 Page 372 Flat angle MC-AF-90 Page 373

339 Visit the local website for more information on products and services

Height-adjustable connector MC-CH Page 373 Universal connector MC-CU Page 373 Wing nut MC-WN-M10 Page 374 Wing nut MC-WN-3D Page 374 Universal plate MC-PU Page 374 Channel insert screw MC-SI-M10 Page 375 Channel connection screw MC-S-M10 Page 375 Channel stiffener insert MC-PI Page 376

Base Connectors

Beam clamp MAB Page 376

Seismic Systems

Seismic channel hinge MQS-AC Page 378 Seismic channel hinge MQS-ACD Page 378 Seismic rod hinge MQS-AB Page 378,379 Seismic angle set MQS-W Page 379 Seismic rod hinge MQS-H Page 379 Seismic rod hinge MQS-CH Page 380 Rod brace MQ3D-AS Page 380 Rod stiffener MQS-RS Page 380

Accessories

Threaded rod 4.8 AM Page 381 Flat washer ISO 7089 Page 381 Flat washer similar to ISO 7089 Page 381,382 Hexagon nut grade 8 DIN 934 Page 382 Prevailing torque hexagon nut M10-SL Page 382 Hexagon bolt Page 383 Hexagon screw DIN 931 Page 383 Spacer coupling, round Page 383,384 Spacer coupling Page 384 Threaded rod cutter NK-M/MRC Page 384

Pipe Rings

Pipe ring MP-PI Page 387 Residential pipe ring MP-LHI Page 387,388 Residential pipe ring MP-HI Page 389 Heavy-duty pipe ring MP-MI M10/M12 Page 390 Heavy-duty pipe ring MP-MI M16 Page 390 Heavy-duty pipe ring (metric) MP-MXI Page 391 Sprinkler pipe hanger LH Page 392 Sprinkler pipe hanger M10, M12, M16 MP-SP Page 393 Refrigeration pipe ring MI-CF Page 393 Refrigeration pipe ring MI-CF Page 394 Refrigeration pipe ring (medium insulated) MIP-M Page 394

Pipe Hangers and Riser Clamps

Standard duty clevis hanger SDC Page 395

Hot-Dip Galvanized Parts

Installation channel MQ-21-HDG ASTM Page 397Installation channel MQ-41-HDG ASTM Page 397Installation channel MQ-52-HDG ASTM Page 397Installation channel MQ-72-HDG ASTM Page 398Installation channel MQ-21-HDG Plus Page 398Installation channel MQ-31-HDG Plus Page 398Installation channel MQ-41-HDG plus Page 399

340

Insta

llati

on

S

yste

ms


Installation channel MQ-21 HDG Plus Page 399Hot-dip galvanized double installation channel (HDG plus) MQ-41 D-HDG plus Page 399

Hot-dip galvanized installation channel MQ-21-F Page 400




Hot-dip galvanized installation channel MQ-21 D-F Page 401

Hot-dip galvanized installation channel MQ-41 D-F Page 401

Hot-dip galvanized double installation channel MQ-52-72 D-F Page 402

Hot-dip galvanized bracket MQK-21-F Page 402



Hot-dip galvanized angle brace MQK-S-F Page 403

Channel connector HDG plus MQN-HDG plus Page 403

Wing nut MQM-DG plus Page 404

Hot-dip galvanized wing nut MQM-F Page 404

Hot-dip galvanized pipe ring saddle MQA-F Page 404

Hot-dip galvanized angle MQW 90°-F Page 405

Hot-dip galvanized angle MQW 45°/135°-F Page 405,406

Hot-dip galvanized angle bracket MQW-S-F Page 406

Connector 2-D HDG MQV-2D-F Page 406

Hot-dip galvanized 3-D connector MQV-3D-F Page 407

Hot-dip galvanized longitudinal connector MQV-F Page 407

Hot-dip galvanized longitudinal connector MQV-F Page 407

Hot-dip galvanized flat connector MQV-T-F Page 408

Hot-dip galvanized rail support MQV 2/2 D-F Page 408

Hot-dip galvanized rail support MQP-1-F Page 408

Hot-dip galvanized rail support MQP-F Page 409

Hot-dip galvanized rail support MQP-G-F Page 409

Pivoting channel connector HDG MQP-U2-F Page 409

Hot-dip galvanized beam clamp MQT-F Page 410

Clamp (channel to channel) HDG MQB-F Page 410

Hot-dip galvanized drilled plate MQZ-L-F Page 411

Hot-dip galvanized 3D-System MQ3D-F Page 411

Installation channel HDG MC-3D-41 OC-A Page 413

Installation channel HDG MC-72 OC-A Page 413

Bracket HDG MC-B-3D-41 OC-A Page 413

Electrical bracket HDG MC-BE OC-A Page 414

Longitudinal channel connector HDG MC-CL OC-A Page 414

Base connector HDG MC-CB OC-A Page 414

Angle HDG MC-A-90 OC-A Page 415

Height-adjustable angle HDG MC-AH-90 OC-A Page 415

Height-adjustable angle HDG MC-MI-AH-90 OC-A Page 415

Flat angle HDG MC-AF-90 OC-A Page 416

Height-adjustable connector HDG MC-CH OC-A Page 416

Universal connector HDG MC-CU OC-A Page 416

www.hilti.group


Wing nut MC-WN-M10 OC Page 417

Wing nut MC-WN-3D OC Page 417

Universal plate HDG MC-PU OC-A Page 417

Channel insert screw MC-SI-M10 OC-A Page 418

Channel connection screw MC-S-M10 OC-A Page 418

Channel stiffener insert MC-PI OC-A Page 418

Hot-dip galvanized threaded rod AM Page 419

Hot-dip galvanized flat washer DIN 125 Page 419

Flat washer similar to ISO 7089 (HDG) Page 419

Hot-dip galvanized hexagon nut Page 420

Prevailing torque hexagon nut HDG M10-SL-F Page 420

Hot-dip galvanized hexagon bolt Page 420,421

Hexagon screw DIN 931 HDG Page 421

Hot-dip galvanized spacer coupling Page 421

Heavy-duty pipe ring M10/M12, M16 HDG MP-MX-F Page 421,422

Heavy-duty pipe ring, metric HDG MP-MXI-F Page 422

Hot-dip galvanized heavy-duty pipe ring MP-MI-F Page 422

Heavy-duty pipe ring HDG MP-M-F Page 423

Stainless Steel PartsInstallation channel (A2 stainless steel) MQ-21-RA2 Page 425

Installation channel (A2 stainless steel) MQ-41-RA2 Page 425

Installation channel (A4 stainless steel) MQ-21-R Page 425



Installation channel (A4 stainless steel) MQ-21 D-R Page 426

Installation channel (A4 stainless steel) MQ-41 D-R Page 427

Bracket (A4 stainless steel) MQK-41-R Page 427

Channel connector (A4 stainless steel) MQN-R Page 427

Wing nut (A4 stainless steel) MQM-R Page 428

Pipe ring saddle (A4 stainless steel) MQA-R Page 428

Angle (A4 stainless steel) MQW 90°-R Page 428,429

Angle (A4 stainless steel) MQW 45°/135°-R Page 429

Connector 2-D (A4 stainless steel) MQV-2D-R Page 429

Rail support (A4 stainless steel) MQV-R Page 430

Rail support (A4 stainless steel) MQP-R Page 430

Beam clamp (A4 stainless steel) MQT-R Page 431

Drilled plate (A4 stainless steel) MQZ-L-R Page 431

Economical anchor rod for injection (A4 stainless steel),AM A4-70 Page 431,432

Flat washer DIN 125 (A4 stainless steel) Page 432

Hexagon nut (A4 stainless steel) Page 432

Hexagon bolt (A4 stainless steel) Page 433

Spacer coupling, round (A4 stainless steel) Page 433

Pipe ring (A4 stainless steel) MP-SRNI Page 433

Pipe ring metric (A4 stainless steel) MP-MRI Page 434

System MI Industrial Pipe and Electrical SupportsGirder MI Page 436

Connector MIC-U Page 436

Connector MIC-L Page 436,437

Insta

llati

on

S

yste

ms


342

Insta

llati

on

S

yste

ms

Connector MIC-T Page 437

Connector MIC-E Page 437

Connector (steel) MIC-S Page 438

Connector (concrete) MIC-C-AA/-D Page 438

Connector (concrete) MIC-C-U Page 439

Connector MIC-U-MA Page 439

Connector MIC-CU-MA Page 439

U-bolt connector MIC-UB Page 440

U-bolt MI-UB Page 440

Easy hand screw MIA-EH Page 441

One-hand screw MIA-OH Page 441

Backing plate MIA-EH-P Page 441

Toothed plate MIA-TP Page 442

Prevailing torque hex nut M12-F-SL-WS 3/4” Page 442

Girder end cap MIA-EC Page 442

Beam clamp MI-SGC Page 443

Beam clamp MI-DGC Page 443

MI/MQ cross connector MIC-MI/MQ-X Page 443

Connector MIC-MI/MQ M8 Page 444

Elevator part MIC Page 444

Ventilation SystemsPerforated band hanger MV-SI Page 446

Perforated band LB Page 446

Air duct bracket MVA-LC/-LP Page 446

Air duct bracket MVA-ZC Page 447

Heavy air duct bracket MVA-LH Page 447

www.hilti.group

CHANNEL INSTALLTIONSystem MM

Insta

llati

on

S

yste

ms


344

Installation channel MM-C-16Technical dataMaterial composition

S250GD - DIN EN 10346

Surface finish Sendzimir galvanized

Key applications and advantages■ Fastening ventilation ducts and cable

trays■ Fastening light to medium-duty pipe

runs■ Recommended for use in dry interiors■ C-profile with serrated edges■ Reinforced slots for greater versatility

Ordering designation Height Length Material thickness Weight per metre length Approvals Sales pack quantity

Item number

MM-C-16 2m 16 mm 2 m 1 mm 558 g RAL-GZ 655-C 16 m 418748

MM-C-16 3m 16 mm 3 m 1 mm 575 g RAL-GZ 655-C 3 m 2038061


S250GD - DIN EN 10346






Item number

MM-C-30 3m M10 30 mm 3 m 1 mm 770 g RAL-GZ 655-C 18 m 418776

MM-C-30 3m 30 mm 3 m 1 mm 806 g RAL-GZ 655-C 3 m 2038062In

sta

llati

on

S

yste

ms

www.hilti.group



S250GD - DIN EN 10346






Item number

MM-C-36 3m M10 36 mm 3 m 1.75 mm 1330 g RAL-GZ 655-C 18 m 418751


S250GD - DIN EN 10346



trays

■ Fastening light to medium-duty pipe runs

■ Recommended for use in dry interiors

■ C-profile with serrated edges

■ Reinforced slots for greater versatility


Item number

MM-C-45 3m 45 mm 3 m 1.75 mm 1780 g RAL-GZ 655-C 3 m 2048104

Bracket MM-B-30Technical dataMaterial composition

Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2

Surface finish Galvanized

Key applications and advantages■ For fastening light to medium-duty pipe

runs■ For fastening ventilation ducts and

cable trays■ Recommended for use in dry interiors■ Serrated C-section■ Reinforced slots for greater versatility

and rigidity

Insta

llati

on

S

yste

ms


346

Ordering designation Profile Length - L Material thickness Weight Sales pack quantity

Item number

MM-B-30/200 MM-C-30 200 mm Channel: 1 mm, Baseplate: 4 mm 287 g 10 pc 418752

MM-B-30/300 MM-C-30 300 mm Channel: 1 mm, Baseplate: 4 mm 403 g 10 pc 418753

Bracket MM-B-36Technical dataMaterial composition

Material channel: S235 JR - DIN EN 10025-2, Material plate: S355 MC - DIN EN 10149-2


Key applications and advantages■ For fastening light to medium-duty pipe

runs■ For fastening ventilation ducts and

cable trays■ Recommended for use in dry interiors■ Serrated C-section edge■ Elongated holes with flanged edges for

greater versatility and strength


Item number

MM-B-36/300 MM-C-36 300 mm Channel: 1.75 mm, Baseplate: 6 mm 628 g 10 pc 418754



Angle brace MM-ABTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ Constructing wall brackets with various

cantilever lengths■ Support for all MM system brackets

fastened on walls■ Allows easy customization of stand-

alone structures

Ordering designation Height - H Length - L Material thickness Weight Sales pack quantity

Item number

MM-AB 202 mm 202 mm 2.5 mm 230 g 10 pc 418772

Insta

llati

on

S

yste

ms

www.hilti.group


Pipe ring saddle MM-STechnical dataMaterial composition

S355 MC - DIN EN 10149-2


Approvals RAL-GZ 655-D

Key applications and advantages■ Installing threaded rods for pipe and air

duct suspension systems■ Installation of threaded studs for fasten-

ing pipes■ Suitable for all three MM channel

profiles■ Can be fitted and removed without

need for tools

Ordering designation Thread - M Tightening torque Weight Sales pack quantity

Item number

MM-S M6 M6 5 Nm 26 g 25 pc 418759

MM-S M8 M8 12 Nm 25 g 25 pc 418760

MM-S M10 M10 16 Nm 25 g 25 pc 418761

Wing nut MM-WNTechnical dataMaterial composition

Nut: DC04 - DIN EN 10130, Wing: PA


Key applications and advantages■ Fitting connectors to installation

channels■ Connector for MM system installation

channels■ Easy to handle■ Wing nut is flush mounted


Item number

MM-WN M6 M6 5 Nm 10 g 50 pc 418764

MM-WN M8 M8 5 Nm 12 g 50 pc 418765

MM-WN M10 M10 5 Nm 12 g 50 pc 418766

Insta

llati

on

S

yste

ms


348

Angle MM-A-90Technical dataMaterial composition

DC04 - DIN EN 10130



Key applications and advantages■ Assembly of frames and supporting

structures■ Joining channels at right angles■ Recommended for U-frame structures■ Pre-assembled for rapid installation■ Can be fitted to channels in various

positions

Ordering designation Thread - M Wrench size Tightening torque Weight Sales pack quantity

Item number

MM-A-90 M8 13 mm 12 Nm 84 g 20 pc 418757

Angle MM-AH-90Technical dataMaterial composition

DC04 - DIN EN 10130



Key applications and advantages■ Assembly of frames and supporting

structures■ Joining channels at right angles■ Pre-assembled for rapid installation■ Can be fitted to channels in various

positions


Item number

MM-AH-90 M8 13 mm 12 Nm 63 g 20 pc 418758In

sta

llati

on

S

yste

ms

www.hilti.group


Rail support MM-R-16-36Technical dataMaterial composition

Material: DC04 - DIN EN 10130, Plate: DD11 - DIN EN 10111


Key applications and advantages■ Fastening channels to any supporting

material■ Pre-assembled for rapid installation■ Reliable and easy to use


Item number

MM-R-16-36 M8 13 mm 12 Nm 424 g 10 pc 418762

Beam clamp MM-T-16-36Technical dataMaterial composition

EN-GJMB-550-4 - DIN EN 1562


Key applications and advantages■ Fastening MM channel profiles to steel

beams■ The beam clamp set fits all common

T-beams (max. clamping thickness 23mm)

■ Extremely quick installation of MM channel system on steel beams without drilling or welding

■ Easy alignment in the right position

Ordering designation Thread - M Wrench size Weight Sales pack quantity

Item number

MM-T-16-36 M8 13 mm 112 g 20 pc 418763

Channel washer MM-CWTechnical dataMaterial composition

DD11 - DIN EN 10111


Key applications and advantages■ Used to support suspended MM chan-

nel systems■ Used together with MM channels, wing

nuts and brackets■ Perfectly matched to the MM installa-

tion channel system■ No lateral slippage possible thanks to

an exact fit

Insta

llati

on

S

yste

ms


350

Ordering designation Hole diameter - D Weight Sales pack quantity

Item number

MM-CW M8 8.6 mm 16 g 20 pc 418769

MM-CW M10 10.6 mm 16 g 20 pc 418770

Channel end cap MM-ETechnical dataMaterial composition

Polypropylene (PP)Key applications and advantages■ Edge protector for MM installation

channel system■ Suitable for all MM installation channels

Ordering designation Weight Sales pack quantity

Item number

MM-E-16 2 g 50 pc 418773

MM-E-30 4 g 50 pc 418774

MM-E-36 5 g 50 pc 418775

MM-E-45 6 g 25 pc 2048095

Rubber inlay MM-RITechnical dataMaterial composition

EPDM

Ageing resistance Tested as per DIN 53508 and 53509

Temperature resistance

-40 - 110 °C

Resistance UV light, diluted acids and alkalis, alcohol solutions, water and water-based solutions

Hardness insulation material

55° ±5° Shore A

Noise reduction 13 dB (A)

Key applications and advantages■ Acoustic insulation of MM channel air

duct supports■ Insulating layer between M8 and M10

threaded rods and the ventilation duct■ Suitable for all MM installation channel

systems and M8/M10 threaded rods■ Prevents direct contact between the air

duct and the channel

Insta

llati

on

S

yste

ms

www.hilti.group


Ordering designation Length - L Weight Sales pack quantity

Item number

MM-RI 10cm 0.1 m 32 g 100 pc 418768

MM-RI 20m 20 m 6880 g 1 pc 418767

CHANNEL INSTALLTIONSystem MQ/MC Galvanized


Installation channel MQ-21Technical dataMaterial composition

S250GD - DIN EN 10346


Key applications and advantages■ Cable trays■ Pipework■ Air ducts■ C-profile with serrated edges■ Aesthetic appearance


Item number

MQ-21 6m 21 mm 6 m 2 mm 1438 g RAL-GZ 655-C 6 m 236647



S250GD - DIN EN 10346




Item number


MQ-41 6m 41 mm 6 m 2.0 mm 2080 g RAL-GZ 655-C 6 m 236645


Installation channel MQ-41/3Technical dataMaterial composition

S250GD - DIN EN 10346


Key applications and advantages■ Cable trays■ Pipework■ Air ducts■ Aesthetic appearance■ Pre-marked dimensions make installa-

tion, assembly and cutting easy


Item number

MQ-41/3 3m 41 mm 3 m 3 mm 2910 g RAL-GZ 655-C 3 m 369596

MQ-41/3 6m 41 mm 6 m 3 mm 2910 g RAL-GZ 655-C 6 m 369597

Insta

llati

on

S

yste

ms


354


S250GD - DIN EN 10346




Item number




S250GD - DIN EN 10346




Item number


Installation channel MQ-21 DTechnical dataMaterial composition

S250GD - DIN EN 10346


Key applications and advantages■ Cable trays■ Pipework■ Air ducts■ Pre-marked dimensions make installa-

tion, assembly and cutting easy■ Modular channel system


Item number

MQ-21 D 6m 41 mm 6 m 2 mm 2904 g RAL-GZ 655-C 6 m 369602

Insta

llati

on

S

yste

ms

www.hilti.group


Double installation channel MQ-41 DTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-41 D 6m 83 mm 6 m 2 mm 4188 g RAL-GZ 655-C 6 m 369604

Double installation channel MQ-52-72 DTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-52-72 D 6m 124 mm 6 m 2.5 mm, 2.75 mm 7078 g RAL-GZ 655-C 6 m 369605

Double installation channel MQ-124X DTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-124X D 6m 124 mm 6 m 3 mm 9841 g RAL-GZ 655-C 6 m 369606

Insta

llati

on

S

yste

ms


356

Bracket MQK-21Technical dataMaterial composition

S235JR - DIN EN 10025

Surface finish Electrogalvanized - for dry indoor use only

Key applications and advantages■ Stand-alone use on ceilings, walls

and floors or combined with channel systems

■ Recommended for installation in dry interiors

■ For the installation of cable trays, air ducts and pipe supports

■ Serrated C-section■ Easy assembly and higher shear loads


Item number

MQK-21/300 MQ-21 300 mm Channel: 2 mm, Baseplate: 6 mm 704 g 10 pc 369607



S235JR - DIN EN 10025








Item number






S235JR - DIN EN 10025








Item number

MQK-72/450 MQ-72 450 mm Channel: 2.75 mm, Baseplate: 10 mm 2566 g 6 pc 369615

MQK-72/600 MQ-72 600 mm Channel: 2.75 mm, Baseplate: 10 mm 3160 g 6 pc 369616

Insta

llati

on

S

yste

ms

www.hilti.group


Angle brace MQK-STechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ Recommended for fabricating wall

brackets with individual stand-off lengths

■ Increases the loadbearing capacity of brackets

■ Easily customized stand-alone structures

■ Channel assembly in two positions is possible

Ordering designation Height - H Length - L A Material thickness Weight Sales pack quantity

Item number

MQK-SK short 328 mm 324 mm 355 mm 3 mm 620 g 10 pc 369622

MQK-SL long 528 mm 524 mm 635 mm 3 mm 980 g 10 pc 369621

Channel connector MQNTechnical dataMaterial composition

Bolt: grade 8.8 - DIN EN ISO 898, Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111


Key applications and advantages■ Recommended for connecting angles

to channels■ One-piece component for connecting

channels and structural elements■ Universal: one and the same nut for all

channels■ Fewer parts and high flexibility


Item number

MQN M10 17 mm 40 Nm 67 g 50 pc 369623

Wing nut MQMTechnical dataMaterial composition

Wings: plastic PA, Nut: S355MC - DIN EN 10149-2


Key applications and advantages■ Simple part for connecting channels

with structural elements■ Easy disassembly■ In-plane connection to channel possible


Item number

MQM-M6 M6 10 Nm 24 g 50 pc 369624

MQM-M8 M8 20 Nm 24 g 50 pc 369698

MQM-M10 M10 30 Nm 25 g 50 pc 369626

Insta

llati

on

S

yste

ms


358

Solid wing nut MQMTechnical dataMaterial composition

Wings: plastic PA, Nut: C4C - DIN EN 10263


Key applications and advantages■ Simple part for connecting channels to

parts of structures■ Element for direct connection to

channels■ Nut with flexible wing


Item number

MQM-M12 M12 40 Nm 32 g 50 pc 369627

Pipe ring saddle MQATechnical dataMaterial composition

Nut: QStE 380 TM, SEW 92, Plate: DD11 - DIN EN 10111, Plastic: PA 6.6


Key applications and advantages■ Various suspensions with threaded rods■ Pipe ring saddle for pipe installation■ One-piece design■ Only one type of saddle nut for all MQ

channels


Item number

MQA-M6 M6 4 Nm 59 g 50 pc 369628

MQA-M8 M8 9 Nm 57 g 50 pc 369629

MQA-M10 M10 18 Nm 58 g 50 pc 369630

Pipe ring saddle MQA-BTechnical dataMaterial composition

Nut: GTW45, DIN 1692, Plate: S 235 JRG2 - DIN EN 10025, Plastic: PBT


Key applications and advantages■ Various suspensions with threaded rods■ Pipe ring saddle for pipe installations

with fire safety requirements■ Single-part design■ One and the same saddle nut for all MQ

channels


Item number

MQA-M10-B M10 18 Nm 90 g 50 pc 372471

MQA-M12-B M12 31 Nm 85 g 50 pc 369631

MQA-M16-B M16 40 Nm 83 g 50 pc 369632

Insta

llati

on

S

yste

ms

www.hilti.group


Preassembled angle MQW-Q2Technical dataMaterial composition

Angle: DD11 - DIN EN 10111, Bolt: M10 grade 8.8 - DIN ISO 898


Material thickness 3 mm

Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ Pre-assembled for rapid installation■ High strength

Ordering designation Angle Wrench size Tightening torque Weight Sales pack quantity

Item number

MQW-Q2 90 ° 17 mm 40 Nm 199 g 20 pc 369655

Angle MQW 90°Technical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Assembly of frames and structures■ Quick installation■ Easy to handle

Ordering designation Angle Weight Sales pack quantity

Item number

MQW-3 90 ° 152 g 20 pc 369656

MQW-4 90 ° 250 g 10 pc 369658

MQW-8/90 90 ° 430 g 10 pc 369659

Insta

llati

on

S

yste

ms


360

Angle MQW 45°/135°Technical dataMaterial composition

DD11 MOD - HN 547, S235JR - DIN EN 10025



Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ Quick installation■ Reliable keying action


Item number

MQW-3/45 45 ° 147 g 20 pc 369657

MQW-8/45 45 ° 400 g 10 pc 369660

Angle bracket MQW-STechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Building frames and other assemblies■ Making connections to walls, floors and

ceilings■ Connection of Hilti channels■ Quick installation■ Universal: few parts for all applications


Item number

MQW-S/2 90 ° 1190 g 10 pc 369665

Connector 2-D MQV-2DTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Suitable for complex channel structures■ For clever single-plane channel design■ Universal: few parts for various

applications■ Easy to use

Insta

llati

on

S

yste

ms

www.hilti.group



Item number

MQV-2/2 D 400 g 10 pc 369638

MQV-3/2 D 580 g 10 pc 369640

Connector 3-D MQV-3DTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For clever 3D channel design■ Universal: few parts for various



Item number

MQV-3/3 D 420 g 10 pc 369641

MQV-4/3 D 700 g 10 pc 369642

Channel tie - flat MQVTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Suitable for complex channel structures■ For clever single-plane channel design■ Universal: few parts for various



Item number

MQV-P4 182 g 10 pc 369644

MQV-T 187 g 10 pc 369645

MQV-P5 240 g 10 pc 370631

Insta

llati

on

S

yste

ms


362

Channel tie MQVTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For connecting two MQ channels

together■ Joints between MQ-41, MQ-41/3 and

MQ-72 channels have the full section modulus

■ Joints between MQ-41 D, and MQ-52/72 channels using 2 connectors have the full section modulus


Item number

MQV-41 1060 g 4 pc 286101

MQV-72 2243 g 4 pc 286102

Channel tie MQV-12Technical dataMaterial composition

S235JRG2 - DIN EN 10025




together■ Simple extension of channel length■ Joints between MQ-41 D, and MQ-

52/72 channels using 2 connectors have the full section modulus


Item number

MQV-12 598 g 10 pc 369643

Rail support MQV-2/2 DTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Connection of channels to any support-

ing material■ High application flexibility■ Reliable and easy to use


Item number

MQV-2/2 D-14 420 g 10 pc 369639

Insta

llati

on

S

yste

ms

www.hilti.group


Rail support MQP-1Technical dataMaterial composition







Item number

MQP-1/1 118 g 20 pc 369646

MQP-1/3 185 g 20 pc 369647

Rail support MQP-45Technical dataMaterial composition







Item number

MQP-45 365 g 10 pc 369649

Rail support MQPTechnical dataMaterial composition






Item number

MQP-21-72 1231 g 12 pc 369651

Insta

llati

on

S

yste

ms


364


Item number

MQP-82 1890 g 8 pc 369652

MQP-124 2779 g 6 pc 369653

Pivot base MQPTechnical dataMaterial composition

S235JR - DIN EN 10025






Item number

MQP-G 1204 g 10 pc 369654

MQP-FG 2070 g 4 pc 284240

Universal joint MQP-UTechnical dataMaterial composition

S235JR - DIN EN 10025



Additional product information

To be used with thread-ed rod of at least 4.8 grade (DIN 976), 8.8 grade bolts (DIN 933), 8 grade nuts (DIN 934) and washers (DIN 125) - these items are not included

Key applications and advantages■ For universal use on inclined supporting

components■ High application flexibility■ Can be set at any angle up to 90°


Item number

MQP-U M12 12.5 mm 438 g 10 pc 284248

MQP-U M16 16.5 mm 429 g 10 pc 284249

Insta

llati

on

S

yste

ms

www.hilti.group


Beam clamp MQTTechnical dataMaterial composition

Claw plate: S235JR - DIN EN 10025, U-bolt: S235JRG2 - DIN EN 10025, Nut - DIN 50961



Beam clamps always to be used in pairs

Key applications and advantages■ For fastening MQ channels to steel

beams without drilling or welding (use only in pairs!)

■ No drilling or welding neccessary■ The attachment fits all standard beams

(max. clamping thickness = 23 mm)


Item number

MQT-21-41 M8 13 mm 10 Nm 378 g 10 pc 369675

MQT-41-82 M10 17 mm 20 Nm 591 g 10 pc 369676

MQT-82-124 M12 19 mm 30 Nm 853 g 10 pc 369677

Clamping claw MQTTechnical dataMaterial composition

GJMW400-5 - EN 1562



Beam clamps always to be used in pairs, To be used with 8.8 grade bolts (DIN 933), 8 grade nuts (DIN 934) and washers (DIN 125) - these items are not included

Key applications and advantages■ Fastening channels to steel beams

without drilling or welding■ Fits all standard beams (max. clamping

thickness = 36 mm)■ Quick installation

Ordering designation Tightening torque Length - L A Slot dimensions - D Weight Sales pack quantity

Item number

MQT-M10 40 Nm 68 mm 30 mm 23 x 11 mm 160 g 20 pc 284242

MQT-M12 40 Nm 74 mm 32 mm 29 x 13 mm 185 g 20 pc 284243

Clamp (channel to channel) MQBTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Channel to channel/wall mounting■ Universal: few parts for all applications■ Easy to use

Insta

llati

on

S

yste

ms


366


Item number

MQB-21 211 g 10 pc 369666

MQB-41 226 g 10 pc 369668

MQB-31 244 g 10 pc 369667

Clamp (channel to concrete) MQBTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For cross connection of MQ channels■ Pushbutton connector takes up shear

and tensile loads■ Universal: few parts for all applications


Item number

MQB-G41 361 g 10 pc 369674

Drilled plate MQZ-LTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ For wall, ceiling or floor attachment of

angles, connectors or brackets■ For fastening metric threaded parts to

MQ channel■ Matching items in program■ Matches the MQ channel system

perfectly


Item number

MQZ-L9 9.5 mm 84 g 20 pc 369678

MQZ-L11 11.5 mm 82 g 20 pc 369679

MQZ-L13 13.5 mm 81 g 20 pc 369680

MQZ-L17 17.5 mm 78 g 20 pc 369681

Insta

llati

on

S

yste

ms

www.hilti.group


Installation washer MQZ-UTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ For use at “butterfly” holes, M10 an-

chor, M10 bolt■ Matching items in program■ All connectors can be installed with

standard M10 bolts


Item number

MQZ-U 27 g 40 pc 369692

Channel tie, shear brace MQZTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ For connecting installation channels

back to back■ Easy fabrication of double channels

using channel ties and magnetic wrench■ Easy to fit in the elongated holes in the

channel

Ordering designation Thread - M Wrench size Material thickness Tightening torque Weight Sales pack quantity

Item number

MQZ-SV M8 13 mm 4 mm 6 Nm 26 g 40 pc 369690

MQZ-SS M10 13 mm 3.5 mm 20 Nm 62 g 40 pc 369691

Channel end cap MQZ-ETechnical dataMaterial composition

Polypropylene (PP)Key applications and advantages■ Provides protection when handling

sharp cut edges■ Clean-cut appearance■ Additional protection when handling

installation channels with sharp, cut edges


Item number

MQZ-E21 3 g 50 pc 370598

Insta

llati

on

S

yste

ms


368


Item number

MQZ-E31 4 g 50 pc 369686

MQZ-E41 5 g 50 pc 369685

Insta

llati

on

S

yste

ms

www.hilti.group


Channels Brackets

MC-3D-41 3m 2063295MC-3D-41 6m 2063294

MC-72 6m 2063298 MC-B-3D-41/450 2063724MC-B-3D-41/650 2063725MC-B-3D-41/1000 2063726

MC-BE-320 2063731MC-BE-630 2063732

MC-CL 2063761

Base Connector Channel Connectors Angles

MQZ-E31 369686 MQZ-E41 369685

Channel nuts Channel screws Channel stiffener Channel plate

Accessories

MC-CB 2061832 MC-CH 2063282 MC-CU 2063763 MC-A-90 2063771 MC-AH-90 2063734 MC-AF-90 2063741

MC-WN-M10 2063743 MC-WN-3D 2063736

End cap

MC-SI-M10 2063750 MC-S-M10 2063738 MC-PI 2063719 MC-PU 2073360

M10x20 2064292 M10x65 2063243 M10-SL 2063246 A10,5/28 2064293

Overview System MC Galvanized

Longitudinal conn.

Insta

llati

on

S

yste

ms


370

3D-system MQ3DTechnical dataMaterial composition

DD11 MOD - HN 547, S235JR - DIN EN 10025, M10x10-10.9 bolt – DIN 933



Key applications and advantages■ Assembly of 3-D structures on site■ Bracing and stiffening of complex fas-

tening solutions■ Universal: few parts for all applications■ Quick and easy to use

Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack quantity

Item number

MQ3D-A 45 ° M10 17 mm 40 Nm 101 g 20 pc 369697

Installation channel MC-3D-41Technical dataMaterial composition

Structural steel with minimum yield strength of 280 N/mm2


Key applications and advantages■ Cable tray supports indoors■ Integrated floor supports■ Instrumentation supports indoors■ Connectivity from all channel sides■ High flexibility in terms of fastening type

and direction

Ordering designation Height Length Material thickness Weight per metre length Sales pack quantity

Item number

MC-3D-41 3m 41 mm 3 m 1.6 mm 1640 g 3 m 2063295

MC-3D-41 6m 41 mm 6 m 1.6 mm 1713 g 6 m 2063294

Installation channel MC-72Technical dataMaterial composition

Structural steel with a minimum yield strength of 250 N/mm2


Key applications and advantages■ Cable tray supports indoors■ Integrated floor supports■ Instrumentation supports indoors■ Serrated C-section profile■ High load capacity


Item number

MC-72 6m 72 mm 6 m 2.75 mm 3830 g 6 m 2063298

Insta

llati

on

S

yste

ms

www.hilti.group


Bracket MC-B-3D-41Technical dataMaterial composition

Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate

Surface finish Electrogalvanized

Key applications and advantages■ Cable tray supports indoors■ Instrumentation supports indoors■ Integrated floor supports■ Connectivity from all channel sides■ High flexibility


Item number

MC-B-3D-41/450 MC-3D-41 450 mm 1.6 mm 1242 g 12 pc 2063724

MC-B-3D-41/650 MC-3D-41 650 mm 1.6 mm 1508 g 12 pc 2063725

MC-B-3D-41/1000 MC-3D-41 1000 mm 1.6 mm 2150 g 12 pc 2063726

Electrical bracket MC-BETechnical dataMaterial composition

Structural steel with a minimum yield strength of 250 N/mm2


Key applications and advantages■ Cable tray supports indoors■ Easy to install■ Various fastening options


Item number

MC-BE-320 97 mm 322 mm 50 mm 1.5 mm 557 g 12 pc 2063731

MC-BE-630 147 mm 632 mm 100 mm 1.5 mm 1138 g 12 pc 2063732

Longitudinal channel connector MC-CLTechnical dataMaterial composition




Key applications and advantages■ Longitudinal connector for MC channels■ Easy to use on the open side or back of

the channel■ Compatible with all MC channels


Item number

MC-CL 708 g 20 pc 2063761

Insta

llati

on

S

yste

ms


372

Base connector MC-CBTechnical dataMaterial composition



Key applications and advantages■ Connection of MC channels to concrete■ Fastening to floors, ceilings or walls■ Various, easy installation options■ Height adjustment


Item number

MC-CB 925 g 12 pc 2061832

Angle MC-A-90Technical dataMaterial composition




Key applications and advantages■ Connection of MC channels at 90

degrees■ Assembly of two and three-dimensional

modular system structures■ Various, easy installation options■ Can be fitted regardless of the direction

in which the open side of the channel is facing


Item number

MC-A-90 90 ° 324 g 1 pc 2063771

Height-adjustable angle MC-AH-90Technical dataMaterial composition






modular system structures■ High application flexibility■ Easy height adjustment along full chan-

nel length and on all channel sides


Item number

MC-AH-90 90 ° 174 g 20 pc 2063734

Insta

llati

on

S

yste

ms

www.hilti.group


Flat angle MC-AF-90Technical dataMaterial composition





degrees■ Various, easy installation options■ High application flexibility


Item number

MC-AF-90 128 g 20 pc 2063741

Height-adjustable connector MC-CHTechnical dataMaterial composition




Key applications and advantages■ Cross-connector for MC channels■ Three-dimensional structures such as

integrated floor supports■ Easy to install■ Height adjustment


Item number

MC-CH 710 g 20 pc 2063282

Universal connector MC-CUTechnical dataMaterial composition




Key applications and advantages■ Connection of MC-3D channel to Hilti

MC and MI installation channels■ Connection of MC-3D channel to

concrete■ Bracing for modular system structures■ Various, easy installation options■ High flexibility in terms of fastening type

and direction


Item number

MC-CU 338 g 12 pc 2063763

Insta

llati

on

S

yste

ms


374

Wing nut MC-WN-M10Technical dataMaterial composition

QStE 380 TM - SEW 092


Key applications and advantages■ Fastening bolts and threaded rods at

the open side of MC channel■ Fastening connectors at the open side

of MC channel, anywhere along its length

■ Easy-to-use single part■ For universal use with all channel sizes


Item number

MC-WN-M10 M10 40 Nm 22 g 50 pc 2063743

Wing nut MC-WN-3DTechnical dataMaterial composition




any side of MC-3D channel■ Fastening connectors at any side of

MC-3D channel■ Assembly of two and three-dimensional

modular system structures■ High application flexibility■ Easy-to-use single part


Item number

MC-WN-3D M10 40 Nm 41 g 20 pc 2063736

Universal plate MC-PUTechnical dataMaterial composition



Key applications and advantages■ Load distribution plate for use where

bolts and threaded rods are fitted through MC channel

■ Various, easy installation options■ Can be fitted on all sides of MC-3D

channel

Ordering designation Material thickness Hole diameter - D Weight Sales pack quantity

Item number

MC-PU 4 mm 13.5 mm 34 g 100 pc 2073360

Insta

llati

on

S

yste

ms

www.hilti.group


Channel insert screw MC-SI-M10Technical dataMaterial composition

Steel grade 8.8


Key applications and advantages■ Assembly of two and three-dimensional

modular system structures■ Fitting connectors to the back or side of

MC-3D channel■ Strong and cost-efficient connection■ High application flexibility

Ordering designation Thread - M Weight Sales pack quantity

Item number

MC-SI-M10 M10 17 g 100 pc 2063750

Channel connection screw MC-S-M10Technical dataMaterial composition

Steel grade 8.8



modular system structures■ Fitting connectors to the back of MC

channels■ Strong and cost-efficient connection■ High application flexibility


Item number

MC-S-M10 M10 47 g 100 pc 2063738

Insta

llati

on

S

yste

ms


376

Channel stiffener insert MC-PITechnical dataMaterial composition



Key applications and advantages■ Channel stiffening insert for use where

bolts and threaded rods are fitted through MC channels

■ Easy-to-use single part■ Surface level with channel after

installation


Item number

MC-PI 18 g 50 pc 2063719

Insta

llati

on

S

yste

ms

www.hilti.group

Beam clamp MABTechnical dataMaterial composition

EN-GJMB – EN 1562


Key applications and advantages■ For fastening to steel beams without

drilling or welding■ Installation on steel beams without

drilling or welding■ Through-hole without thread

Ordering designation

Thread - M

Hole diameter - D

X Y Maximum ten-sile load - F

Approvals Weight Sales pack quantity

Item number

MAB-9 M8 9 mm 20.9 mm 18 mm 1.2 kN 88 g 12 pc 375956

MAB-11 M10 11 mm 23.4 mm 19.5 mm 2.5 kN FM approved, UL approved EX15279

152 g 12 pc 375957

MAB-13 M10 13 mm 35 mm 26 mm 3.5 kN FM approved, UL approved EX15279

219 g 12 pc 375958

MAB-17 M12 17 mm 30 mm 28.5 mm 5.5 kN FM approved, UL approved EX15279

352 g 12 pc 228155

SEISMIC SYSTEMS

Insta

llati

on

S

yste

ms


378

Seismic channel hinge MQS-ACTechnical dataMaterial composition

Connector: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8


Key applications and advantages■ Seismic-resistant installation of pipes,

cable trays and air duct supports■ Assembly of seismic bracing using MQ

installation channels■ Maximum installation flexibility due to

variable angle■ Fully pre-assembled

Ordering designation Diameter - D Weight Sales pack quantity

Item number

MQS-AC-10 11.5 mm 231 g 10 pc 2083725

MQS-AC-12 13.6 mm 240 g 10 pc 2083726

Seismic channel hinge MQS-ACDTechnical dataMaterial composition

Connector: S275JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8



cable trays and air duct supports■ Assembly of seismic bracing using MQ

installation channels■ Maximum installation flexibility due to

variable angle■ Fully pre-assembled


Item number

MQS-ACD-10 11.5 mm 314 g 10 pc 2083727

MQS-ACD-12 13.6 mm 314 g 10 pc 2083728

Seismic rod hinge MQS-ABTechnical dataMaterial composition

DD11 - DIN EN 10111, S235JR - DIN EN 10025, Base plate: S355MC - DIN EN 10149-2, Bolt: Steel grade 8.8, Nut: Steel grade 8


Key applications and advantages■ Assembly of seismic bracing using

threaded rods■ Seismic bracing for large-diameter

pipes – fastened to the pipe ring flange■ Seismic-resistant installation of pipes,

cable trays and air duct supports■ Mounting holes in four sizes for a per-

fect fit with the most suitable anchor or means of fastening

■ MQS-AB-16 is ideal for attaching seismic bracing to pipe ring flanges (MP-MX or MP-MXI)

Insta

llati

on

S

yste

ms

www.hilti.group



Item number

MQS-AB-10 11.5 mm 195 g 10 pc 2083731

MQS-AB-12 13.6 mm 195 g 10 pc 2083732

MQS-AB-16 16.3 mm 194 g 10 pc 2083733

Seismic angle set MQS-WTechnical dataMaterial composition

S275JR - EN 10025, Bolt: Steel grade 8.8, Nut: Steel grade 8




cable trays and air duct supports■ Fastening MQS-AC or MQS-AB seismic

hinges to MQ installation channels■ Very high load capacity for optimal

transfer of seismic loads thanks to reinforcing bar

■ Holes allow the seismic brace to easily rotate according to the type of bracing required – transversal, longitudinal or 4-way

Ordering designation Height - H Weight Sales pack quantity

Item number

MQS-W-41 set 41 mm 396 g 10 pc 2083735

MQS-W-72 set 72 mm 450 g 10 pc 2083736

MQS-W-41D set 82 mm 466 g 10 pc 2083737

Seismic rod hinge MQS-HTechnical dataMaterial composition

Connector: S275JR - DIN EN 10025, Pin: 11SMnPb37+C



Thread - M (input) M10


cable trays and air duct supports■ Direct installation of seismic bracing on

threaded rods■ High load capacity for optimal transfer

of seismic loads■ Threaded connection suitable for seis-

mic bracing using threaded rods (M10)

Ordering designation Thread - M Diameter - D A B Weight Sales pack quantity

Item number

MQS-H-10 M10 10 mm 10 mm 16 mm 79 g 10 pc 2083739

MQS-H-12 M10 12 mm 12 mm 18 mm 81 g 10 pc 2083740

Insta

llati

on

S

yste

ms


380

Seismic rod hinge MQS-CHTechnical dataMaterial composition

Connector: S275JR - DIN EN 10025, Pin: 11SMnPb37+C



Thread - M (input) M10


cable trays and air duct supports■ Anchoring seismic bracing to the base

material using threaded rods■ Maximum installation flexibility due to

variable angle■ High load capacity for optimal transfer

of seismic loads


Item number

MQS-CH M10 95 g 10 pc 2083741

Rod brace MQ3D-ASTechnical dataMaterial composition



Material thickness 3.0 mm

Key applications and advantages■ Assembly of seismic bracing using

threaded rods■ Seismic-resistant installation of pipes,

cable trays and air duct supports■ High load capacity for optimal transfer

of seismic loads■ Threaded rod can be easily inserted into

the connector and locked by tightening the inner nut


Item number

MQ3D-AS 73 g 20 pc 2083742

Rod stiffener MQS-RSTechnical dataMaterial composition

Carbon steel


Key applications and advantages■ Seismic compression bracing of thread-

ed rods■ Pre-assembled


Item number

MQS-RS 64 g 25 pc 311943

Insta

llati

on

S

yste

ms

www.hilti.group


Threaded rod 4.8 AMTechnical dataMaterial composition

Steel grade 4.8 - DIN 976-1


Ordering designation Thread - M Length - L Weight Sales pack quantity

Item number

AM6x1000 4.8 zinced M6 1000 mm 190 g 20 pc 339792AM6x3000 4.8 zinced M6 3000 mm 510 g 20 pc 216412AM8x1000 4.8 zinced M8 1000 mm 319 g 20 pc 339793AM8x2000 4.8 zinced M8 2000 mm 620 g 20 pc 339794AM8x3000 4.8 zinced M8 3000 mm 930 g 20 pc 216415AM10x1000 4.8 zinced M10 1000 mm 500 g 20 pc 339795AM10x2000 4.8 zinced M10 2000 mm 970 g 20 pc 339796AM10x3000 4.8 zinced M10 3000 mm 1469 g 20 pc 216418AM12x2000 4.8 zinced M12 2000 mm 1418 g 15 pc 216420AM12x3000 4.8 zinced M12 3000 mm 2129 g 15 pc 216421AM16x1000 4.8 zinced M16 1000 mm 1334 g 5 pc 216422AM16x2000 4.8 zinced M16 2000 mm 2622 g 5 pc 216423AM16x3000 4.8 zinced M16 3000 mm 3933 g 5 pc 216424AM20x1000 4.8 zinced M20 1000 mm 1920 g 5 pc 216425AM20x2000 4.8 zinced M20 2000 mm 4140 g 5 pc 212632AM24x2000 4.8 zinced M24 2000 mm 5925 g 5 pc 212633

Flat washer ISO 7089Technical dataMaterial composition

Steel - DIN EN ISO 7089


Ordering designation Inside diameter - DI Outside diameter - DA Cross section thickness - s Weight Sales pack quantity

Item number

A 6,4/12 zinced 6.4 mm 12 mm 1.6 mm 1 g 500 pc 2142936

A 8,4/16 zinced 8.4 mm 16 mm 1.6 mm 2 g 200 pc 2142937

A 10,5/20 zinced 10.5 mm 20 mm 2 mm 3 g 100 pc 2142938

A 13/24 zinced 13 mm 24 mm 2.5 mm 6 g 100 pc 2142439

A 17/30 zinced 17 mm 30 mm 3 mm 10 g 100 pc 2142950




Flat washer similar to ISO 7089 Technical dataMaterial composition

Steel


Insta

llati

on

S

yste

ms


382


Item number




A10,5/28 zinced 10.5 mm 28 mm 2 mm 8 g 100 pc 2064293





Hexagon nut grade 8 DIN 934Technical dataMaterial composition

Steel grade 8


Ordering designation Thread - M Height - H Wrench size - W Weight Sales pack quantity

Item number

M6 zinced M6 5 mm 10 mm 2 g 100 pc 2142979








Prevailing torque hexagon nut M10-SLTechnical dataMaterial composition

Steel grade 8


Key applications and advantages■ Self-locking function through the nut

insert

Ordering designation Tightening torque Weight Sales pack quantity

Item number

M10-SL zinced 40 Nm 16 g 100 pc 2063246

Insta

llati

on

S

yste

ms

www.hilti.group


Hexagon bolt Technical dataMaterial composition

Steel grade 8.8


Ordering designation Thread - M Thread length - L Height - H Wrench size - W Weight Sales pack quantity

Item number

M6x16 zinced M6 16 mm 4 mm 10 mm 6 g 100 pc 216443M6x25 zinced M6 25 mm 4 mm 10 mm 7 g 100 pc 2142964M6x40 zinced M6 40 mm 4 mm 10 mm 9 g 100 pc 216445M8x16 zinced M8 16 mm 5 mm 13 mm 11 g 100 pc 216446M8x20 zinced M8 20 mm 5 mm 13 mm 12 g 100 pc 216447M8x25 zinced M6 25 mm 5 mm 13 mm 14 g 100 pc 2142965M8x30 zinced M8 30 mm 5 mm 13 mm 15 g 100 pc 47425M8x35 zinced M8 35 mm 5 mm 13 mm 16 g 100 pc 216449M8x55 zinced M8 55 mm 5 mm 13 mm 23 g 100 pc 216450M10x16 zinced M10 16 mm 6 mm 17 mm 19 g 100 pc 216452M10x20 zinced M10 20 mm 6 mm 17 mm 22 g 100 pc 2142967M10x25 zinced M10 25 mm 6 mm 17 mm 25 g 100 pc 2142968M10x30 zinced M10 30 mm 6 mm 17 mm 27 g 100 pc 2142969M10x35 zinced M10 35 mm 6 mm 17 mm 30 g 100 pc 216455M12x22 zinced M12 22 mm 8 mm 19 mm 33 g 50 pc 216457M12x25 zinced M12 25 mm 8 mm 19 mm 36 g 50 pc 2142971M16x40 zinced M16 40 mm 10 mm 24 mm 90 g 50 pc 2142974

Hexagon screw DIN 931Technical dataMaterial composition

Steel grade 8.8


Ordering designation Thread - M Thread length - L A Height - H Wrench size - W Weight Sales pack quantity

Item number

M10x65 zinced M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc 2063243

Spacer coupling, round Technical dataMaterial composition

Steel


Insta

llati

on

S

yste

ms


384

Ordering designation Thread - M Length - L Diameter - D Weight Sales pack quantity

Item number

M6x30 round M6 30 mm 10 mm 12 g 100 pc 216433








Spacer coupling Technical dataMaterial composition

Steel grade 4.6


Key applications and advantages■ Quick connection of threaded rod in

hanging installations

Ordering designation Thread - M Length - L Wrench size - W Weight Sales pack quantity

Item number

M6x18 M6 18 mm 10 mm 8 g 50 pc 70063

M8x25 M8 25 mm 11 mm 12 g 50 pc 216703

M8x40 M8 40 mm 11 mm 18 g 50 pc 432188

M10x30 M10 30 mm 13 mm 18 g 50 pc 216704

M12x40 M12 40 mm 17 mm 46 g 50 pc 216705

M16x40 M16 40 mm 24 mm 99 g 25 pc 216706

Threaded rod cutter NK-M/MRCTechnical dataMaterial composition

Steel

Surface finish Painted

Key applications and advantages■ Cutting threaded rods■ Cuts M6/M8/M10 threaded rods easily

without burring or producing swarf■ Supplied complete with two pre-assem-

bled dies (M8/M10)


Item number

MRC - M8/10 4530 g 1 pc 295418

MRC - M6 M6 42 g 1 pc 295414

MRC - M8 M8 42 g 1 pc 295412

MRC - M10 M10 42 g 1 pc 295413

Insta

llati

on

S

yste

ms

www.hilti.group

PIPE RINGS

Insta

llati

on

S

yste

ms


386

Light and medium-duty galvanized pipe ringsMP-PI

• • • •

MP-HI M8/M10

• • • •

MP-H M8/M10

• • •

MPN-RC

• • • •

MPN-GK

• • •

750-2500 N

16 dB(A)

-40 to +110 ºC

600-1500 N

17 dB(A)

-40 to +110 ºC

500-1000 N

450-1800 N

15 dB(A)

-40 to +110 ºC

750 N 17 dB(A)

-50 to +110 ºC

• • •

• • • •

• • •

• •

11-326 mm

M8, M8/M10, M12

Sec re fi e r er i a• High quality, with third party approvals

8-172 mm

M8/M10 Sec re fi e r er i a• Safe closure with click feedback• Double connection boss

16-172 mm

M8/M10 • Safe closure with click feedback• Double connection boss

8-170 mm

M8/M10M16

• Three-stage quick closure• Innovative low-friction strip for easy pipe positioning

16-63 mm

M8 and M8/M10

• Three-stage quick closure S ecia artia c c ati r

friction

Heavy-duty galvanized pipe ringsMP-MI

• • • • •

MP-M

• • • •

MP-MXI

• • • • •

MP-MX

• • • •

1800-4500 N

19 dB(A)

-40 to +110 ºC

1800-4500 N

2400-17000 N

16 dB(A)

-50 to +120 ºC

4000-17000 N

• • • • •

•

• • • • • •

• • •

15-250 mm

M10/M12, M16, 1/2”, 3/4”

• Solidly made, strong and rigid• Welded clamping nuts• Civil protection approval

15-224 mm

M16, 1/2”, 3/4”

• Solidly made, strong and rigid• Welded clamping nuts• Civil protection approval

60-508 mm

M10/M12, M16, 3/4”, 1”

• Highest loads upto 17 kN• Dynamic load tested• Civil protection approval

60-508 mm

M10/M12, M16, 3/4”, 1”

• Highest loads upto 17 kN• Dynamic load tested

Chilled water and sprinkler systems galvanized pipe ringsMIP-M/-H/-T

•

MI-CF

•

KF

•

MP-SP

•

LH

•

MP-MS

•

SDC

• • •

40-12800 N

16 dB(A)

-40 to +105 ºC

30-3840 N

-80 to +140 ºC

150-29230 N

-160 to +130 ºC

2000-7000 N

2000-8000 N

3200-5500 N

2800-16500 N

10-457 mm

M8/M10, M16

•Completely isolated system• Thermal conductivity -0,030 W/mK• Integrated vapour barrier

10-273 mm

M8, M10, M10/M12, M16

• Thermal conductivity -0,030 W/mK• Integrated vapour barrier• Version with load sheet available

12.7-609 mm

M8/1/2”,M10/1/2”,3/4”, M16,M20, M24

• Thermal conductivity -0,042 W/mK• High load capacity s te acc rate fit s rt

surfaces

3/4”- 8” or 27 - 219 mm

M8,M10, M12. M16

• Rapid installation thanks to “click” closure system• System approved by Vds, FM and UL

1/2”- 8” or 20 - 224 mm

M10, M12

• System approved by FM and UL

20-219 mm

M8,M10, M12. M16

• Welded clamping nuts• System approved by Vds, FM and UL

1/2”- 12” or 20 - 324 mm

M10, M12. M16, M20, M24

• Easy height adjustment• System approved by FM and UL

• •

•

•

•

Stainless steel pipe ringsMP-SRNI

• • • • •

MP-SRN

• • • •

MP-MRI

• • • • •

MP-MR

• • • •

MP-MRXI

• • • • •

1300-1800 N

15 dB(A)

-50 to +120 ºC

2000 N

3000-5000 N

18 dB(A)

-50 to +120 ºC

3000-5000 N

10000-13000 N

16 dB(A)

-50 to +120 ºC

15-64 mm

M8, M10

• High quality 1.4571 / 1.4404 (A4)

15-65 mm

M8, M10

• High quality 1.4571 / 1.4404 (A4)

68-224 mm

M10, M12, M16

• High quality 1.4571 / 1.4404 (A4)

68-224 mm

M10, M12, M16

• High quality 1.4571 / 1.4404 (A4)

244-508 mm

M16 • High quality 1.4571 / 1.4404 (A4)

• • • •

• •

• • •

• •

• • •

Hot-dipped galvanized pipe rings

MP-MI-F

• • • • • •

MP-M-F

• • • • •

MP-MXI-F

• • • • • •

MP-MX-F

• • • • •

1800 N 18 dB(A)

-50 to +120 ºC

1800 N

2400-17000 N

16 dB(A)

-50 to +120 ºC

4000-17000 N

20-90 mm

M10 • Good resistance to corrosion (45 µm)

20-90 mm

M10 • Good resistance to corrosion (45 µm)

60-508 mm

M10/M12, M16

• Good resistance to corrosion (45 µm)• High loads to 17 kN

60-508 mm

M16 • Good resistance to corrosion (45 µm)• High loads to 17 kN

• •

• • • •

• •

Pipe Ring Picture Applications Techincal Data Features Approvals

Fre

sh

wa

ter

dis

trib

uti

on

pip

es

He

ati

ng

Pip

es

Ga

s d

istr

ibu

tio

n

pip

es

Wa

ste

wa

ter

dis

trib

uti

on

pip

es

Ch

ille

d w

ate

rp

ipe

s

Sp

rin

kle

r p

ipe

s

Lig

ht

ind

ustr

ial

ap

plic

ati

on

sC

orr

osiv

e

Su

rro

un

din

gs

Re

co

mm

en

de

dsta

tic

lo

ad

fo

r su

sp

en

de

din

sta

llati

on

- F

rec

Ave

rag

e n

ois

ee

dc

tio

n

Tem

pe

ratu

re

resis

tan

ce

Cla

mp

ing

ra

ng

e

Co

nn

ec

tio

n b

oss Special features

2)

3)

4) 3)

2) Only clamping range 15 mm to 200 mm 3) Only boss sizes M16, 3/4”, 1”4) Only M10/12 and M16

1)

1) Only clamping range 8 mm to 110 mm

Pipe Ring selector chart

Insta

llati

on

S

yste

ms

www.hilti.group


Pipe ring MP-PITechnical dataMaterial composition

SPCC-SD FB - Q/BQB402, DC01 – EN 10130



-40 - 110 °C


75° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected, Fire Class E


The maximum load of 5000 N in accordance with RAL-GZ 655-B can be achieved if pipe rings 8 inches in diameter and larger are fastened with two threaded rods

Insulation material EPDM

Key applications and advantages■ Fresh water distribution pipes■ Waste water distribution pipes■ Heating and gas distribution pipes■ Securely fixed rubber inlay – no drop-

ping out■ High-quality product with third-party

approvals

Ordering designation Clamping range - D

Nominal pipe size (imperial)

Width - B Cross section width and thick-ness (b x s)

Distance centre pipe to top - h

Maximum load - F

Distance be-tween holes - A

Sales pack quantity

Item number

MP-PI 11-15 1/4” M8/M10 11 - 15 mm 1/4 in 54 mm 20 x 1.2 mm 33 mm 750 N 39 mm 150 pc 2126900MP-PI 16-20 3/8” M8/M10 16 - 20 mm 3/8 in 58 mm 20 x 1.2 mm 35 mm 750 N 42 mm 150 pc 2126901MP-PI 20-24 1/2” M8/M10 20 - 24 mm 1/2 in 62 mm 20 x 1.2 mm 37 mm 750 N 47 mm 150 pc 2126902MP-PI 25-28 3/4” M8/M10 25 - 28 mm 3/4 in 68 mm 20 x 1.2 mm 40 mm 750 N 53 mm 150 pc 2126903MP-PI 32-36 1” M8/M10 32 - 36 mm 1 in 76 mm 20 x 1.2 mm 43 mm 750 N 61 mm 150 pc 2126904MP-PI 38-46 11/4” M8/M10 38 - 46 mm 1-1/4 in 91 mm 20 x 1.2 mm 48 mm 750 N 74 mm 100 pc 2126905MP-PI 48-53 11/2” M8/M10 48 - 53 mm 1-1/2 in 98 mm 20 x 1.2 mm 51 mm 750 N 81 mm 100 pc 2126906MP-PI 54-58 M8/M10 54 - 58 mm 105 mm 20 x 1.5 mm 54 mm 1250 N 87 mm 100 pc 2126907MP-PI 59-66 2” M8/M10 59 - 66 mm 2 in 111 mm 20 x 1.5 mm 58 mm 1250 N 94 mm 100 pc 2126908MP-PI 67-73 M8/M10 67 - 73 mm 119 mm 20 x 1.5 mm 62 mm 1250 N 101 mm 50 pc 2073470MP-PI 75-80 21/2” M8/M10 75 - 80 mm 2-1/2 in 124 mm 20 x 1.5 mm 64 mm 1250 N 106 mm 50 pc 2073471MP-PI 81-87 M8/M10 81 - 87 mm 134 mm 20 x 1.5 mm 68 mm 1250 N 116 mm 50 pc 2073472MP-PI 87-92 3” M8/M10 87 - 92 mm 3 in 137 mm 20 x 1.5 mm 72 mm 1250 N 119 mm 50 pc 2073473MP-PI 99-105 31/2” M8/M10 99 - 105 mm 3-1/2 in 150 mm 20 x 1.5 mm 77 mm 1250 N 131 mm 50 pc 2073474MP-PI 107-115 4” M8/M10 107 - 115 mm 4 in 163 mm 20 x 2 mm 83 mm 1500 N 145 mm 50 pc 2073475MP-PI 120-128 M8/M10 120 - 128 mm 185 mm 20 x 2 mm 92 mm 1500 N 167 mm 50 pc 2073476MP-PI 129-134 M8/M10 129 - 134 mm 188 mm 20 x 2 mm 94 mm 1500 N 170 mm 50 pc 2073477MP-PI 135-143 5” M8/M10 135 - 143 mm 5 in 201 mm 20 x 2 mm 101 mm 1500 N 183 mm 50 pc 2073478MP-PI 149-161 M8/M10 149 - 161 mm 212 mm 20 x 2 mm 108 mm 1500 N 195 mm 50 pc 2073479MP-PI 162-170 6” M8/M10 162 - 170 mm 6 in 228 mm 20 x 2 mm 113 mm 1500 N 210 mm 50 pc 2073480MP-PI 177-182 M8/M10 177 - 182 mm 236 mm 25 x 2 mm 118 mm 1750 N 218 mm 25 pc 2073481MP-PI 192-204 M8/M10 192 - 204 mm 261 mm 25 x 2 mm 131 mm 1750 N 243 mm 25 pc 2073482MP-PI 207-219 M8/M10 207 - 219 mm 284 mm 25 x 2.5 mm 144 mm 2250 N 266 mm 25 pc 2073483MP-PI 218-226 8” M12 218 - 226 mm 8 in 298 mm 25 x 2.5 mm 146 mm 2250 N 275 mm 25 pc 2073484MP-PI 242-253 M12 242 - 253 mm 326 mm 30 x 3 mm 148 mm 2500 N 303 mm 10 pc 2073485MP-PI 272-281 10” M12 272 - 281 mm 10 in 360 mm 30 x 3 mm 162 mm 2500 N 337 mm 10 pc 2073486MP-PI 313-326 12” M12 313 - 326 mm 12 in 407 mm 30 x 3 mm 185 mm 2500 N 384 mm 10 pc 2073487

Residential pipe ring MP-LHITechnical dataMaterial composition

DC01 - DIN EN 10130



-40 - 110 °C


45° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 655-B

Insulation material EPDM rubber

Key applications and advantages■ Light-duty pipe installation up to 2”■ Fastening drinking water pipes and

heating pipes in residential and industri-al construction

■ Gas distribution pipes■ Quick-release closure with only one

clamping screw - easy, quick closing and easy re-opening

■ The adhesive-bonded acoustic insu-lation insert doesn’t drop out during installation

Insta

llati

on

S

yste

ms


388



Width - B

Cross section width and thick-ness (b x s)

Max. extension from centre - b1


Max-imum load - F

Sales pack quantity

Item number

MP-LHI 12-16 1/4” M8

12 - 16 mm 1/4 in 47 mm 20 x 0.8 mm 27 mm 22 mm 400 N 25 pc 2020539

MP-LHI 20-25 1/2” M8


MP-LHI 25-31 3/4” M8


MP-LHI 31-38 1” M8

31 - 38 mm 1 in 70 mm 20 x 0.8 mm 37 mm 34 mm 400 N 25 pc 2020733

MP-LHI 38-45 1 1/4” M8

38 - 45 mm 1-1/4 in 77 mm 20 x 1.2 mm 41 mm 37 mm 750 N 25 pc 2020734

MP-LHI 45-52 1 1/2” M8

45 - 52 mm 1-1/2 in 85 mm 20 x 1.2 mm 45 mm 42 mm 750 N 25 pc 2020735

MP-LHI 52-59 M8 52 - 59 mm 92 mm 20 x 1.2 mm 49 mm 45 mm 750 N 25 pc 2020736

MP-LHI 59-66 2” M8

59 - 66 mm 2 in 100 mm 20 x 1.2 mm 53 mm 49 mm 750 N 10 pc 2020737

Insta

llati

on

S

yste

ms

www.hilti.group


Residential pipe ring MP-HITechnical dataMaterial composition

DC01 - DIN EN 10130



-40 - 110 °C


45° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected, Fire class B2, RAL-GZ 655-B, RAL-GZ 656


Key applications and advantages■ Light-duty pipe installation up to 6”

diameter■ Fastening drinking water pipes and

heating pipes in residential and industri-al construction

■ Gas distribution pipes■ Two-screw pipe ring with side swivelling

mechanism■ Safe click closure for easy and fast

pre-fixing



Width - B Cross section width and thickness (b x s)


Maximum load - F

Clamping screw

Sales pack quantity

Item number

MP-HI 8-12 M8/M10 8 - 12 mm

52 mm 20 x 1 mm 30 mm 600 N M5 25 pc 386402

MP-HI 12-16 M8/M10 12 - 16 mm

1/4 in 52 mm 20 x 1 mm 30 mm 600 N M5 25 pc 386403

MP-HI 16-20 M8/M10 16 - 20 mm

3/8 in 57 mm 20 x 1 mm 32 mm 600 N M5 25 pc 386404

MP-HI 20-25 M8/M10 20 - 25 mm

1/2 in 62 mm 20 x 1 mm 35 mm 600 N M5 25 pc 386405

MP-HI 25-31 M8/M10 25 - 31 mm

3/4 in 69 mm 20 x 1 mm 38 mm 600 N M5 25 pc 386406

MP-HI 31-38 M8/M10 31 - 38 mm

1 in 76 mm 20 x 1 mm 41 mm 600 N M5 25 pc 386407

MP-HI 38-45 M8/M10 38 - 45 mm

1-1/4 in 86 mm 20 x 1.2 mm 46 mm 750 N M5 25 pc 386408

MP-HI 45-52 M8/M10 45 - 52 mm

1-1/2 in 93 mm 20 x 1.2 mm 49 mm 750 N M5 25 pc 386409

MP-HI 52-59 M8/M10 52 - 59 mm

100 mm 20 x 1.2 mm 53 mm 750 N M5 25 pc 386410

MP-HI 59-66 M8/M10 59 - 66 mm

2 in 108 mm 20 x 1.2 mm 57 mm 750 N M5 10 pc 386411

MP-HI 66-75 M8/M10 66 - 75 mm

128 mm 25 x 1.8 mm 63 mm 1200 N M6 10 pc 386412

MP-HI 75-84 M8/M10 75 - 84 mm

2-1/2 in 137 mm 25 x 1.8 mm 67 mm 1200 N M6 10 pc 386413

MP-HI 84-93 M8/M10 84 - 93 mm

3 in 146 mm 25 x 1.8 mm 72 mm 1200 N M6 10 pc 386414

MP-HI 93-101 M8/M10 93 - 101 mm

155 mm 25 x 1.8 mm 76 mm 1200 N M6 10 pc 386415

MP-HI 101-110 M8/M10 101 - 110 mm

164 mm 25 x 1.8 mm 81 mm 1200 N M6 10 pc 386416

MP-HI 110-119 M8/M10 110 - 119 mm

4 in 175 mm 25 x 2.2 mm 86 mm 1500 N M6 10 pc 386417

MP-HI 119-129 M8/M10 119 - 129 mm

185 mm 25 x 2.2 mm 91 mm 1500 N M6 10 pc 386418

MP-HI 129-137 M8/M10 129 - 137 mm

193 mm 25 x 2.2 mm 95 mm 1500 N M6 10 pc 386419

MP-HI 137-145 M8/M10 137 - 145 mm

5 in 203 mm 25 x 2.2 mm 100 mm 1500 N M6 10 pc 386420

MP-HI 145-155 M8/M10 145 - 155 mm

211 mm 25 x 2.2 mm 104 mm 1500 N M6 10 pc 386421

MP-HI 155-163 M8/M10 155 - 163 mm

220 mm 25 x 2.2 mm 109 mm 1500 N M6 10 pc 386422

MP-HI 163-172 M8/M10 163 - 172 mm

6 in 228 mm 25 x 2.2 mm 113 mm 1500 N M6 10 pc 386423

Insta

llati

on

S

yste

ms


390

Heavy-duty pipe ring MP-MI M10/M12Technical dataMaterial composition

S235JRG - DIN EN 10025



-40 - 110 °C


50° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected, Fire class B2


Key applications and advantages■ Heavy-duty pipe installations in diame-

ters up to 250 mm■ Installation of industrial pipework■ Process and control lines■ M8 clamping screws, secured against

loss, with comination cross-recess head■ Welded-on heavy-duty nuts for clamp-

ing screw sizes 68 / 72 and above


Clamping range - D Nominal pipe size (imperial)



Maximum load - F

Clamping screw

Sales pack quantity

Item number

MP-MI 3/8” G 15 - 19 mm 3/8 in 64 mm 24 x 2 mm 33 mm 1800 N M8 25 pc 20843MP-MI 1/2” G 20 - 25 mm 1/2 in 69 mm 24 x 2 mm 36 mm 1800 N M8 25 pc 20845MP-MI 1” G 32 - 38 mm 1 in 83 mm 24 x 2 mm 42 mm 1800 N M8 25 pc 20849MP-MI 1 1/4” G 40 - 45 mm 1-1/4 in 92 mm 24 x 2 mm 47 mm 1800 N M8 25 pc 20851MP-MI 1 1/2” G 48 - 54 mm 1-1/2 in 101 mm 24 x 2 mm 50 mm 1800 N M8 25 pc 20853MP-MI 54/57 G 54 - 57 mm 107 mm 24 x 2 mm 53 mm 1800 N M8 10 pc 20855MP-MI 2” G 57 - 64 mm 2 in 111 mm 24 x 2 mm 55 mm 1800 N M8 10 pc 20857MP-MI 68/72 G 68 - 72 mm 123 mm 24 x 2 mm 60 mm 1800 N M8 10 pc 20860MP-MI 2 1/2” G 70 - 77 mm 2-1/2 in 130 mm 24 x 2 mm 64 mm 1800 N M8 10 pc 20862MP-MI 78/84 G 80 - 84 mm 139 mm 24 x 2 mm 68 mm 1800 N M8 10 pc 20865MP-MI 3” G 82 - 90 mm 3 in 144 mm 24 x 2 mm 71 mm 1800 N M8 10 pc 20866MP-MI 101.6 G 97 - 103 mm 163 mm 30 x 2.5 mm 78 mm 2400 N M8 5 pc 20869MP-MI 4” G 108 - 114 mm 4 in 174 mm 30 x 2.5 mm 84 mm 2400 N M8 5 pc 20871MP-MI 125 G 122 - 127 mm 187 mm 30 x 2.5 mm 90 mm 2400 N M8 5 pc 20876MP-MI 133 G 132 - 137 mm 198 mm 30 x 2.5 mm 95 mm 2400 N M8 10 pc 20879MP-MI 5” G 137 - 142 mm 5 in 203 mm 30 x 2.5 mm 98 mm 2400 N M8 10 pc 20882MP-MI 159 G 156 - 162 mm 223 mm 30 x 2.5 mm 107 mm 2400 N M8 10 pc 20885MP-MI 6” G 162 - 168 mm 6 in 229 mm 30 x 2.5 mm 110 mm 2400 N M8 10 pc 20887

Heavy-duty pipe ring MP-MI M16Technical dataMaterial composition

S235JRG - DIN EN 10025



-40 - 110 °C


50° ±5° Shore A





ters up to 250 mm■ Installation of industrial pipework■ Process and control lines■ M8 clamping screws, secured against

loss, with comination cross-recess head■ Welded-on heavy-duty nuts for clamp-

ing screw sizes 68 / 72 and above

Ordering designation Clamping range - D Nominal pipe size (imperial)



Max-imum load - F

Clamping screw

Sales pack quantity

Item number

MP-MI 2” C 57 - 64 mm 2 in 111 mm 24 x 2 mm 56 mm 1800 N M8 10 pc 20858MP-MI 2 1/2” C 70 - 77 mm 2-1/2 in 130 mm 24 x 2 mm 65 mm 1800 N M8 10 pc 20863MP-MI 3” C 82 - 90 mm 3 in 144 mm 24 x 2 mm 72 mm 1800 N M8 10 pc 20867MP-MI 4” C 108 - 114 mm 4 in 174 mm 30 x 2.5 mm 84 mm 2400 N M8 5 pc 20872MP-MI 133 C 132 - 137 mm 198 mm 30 x 2.5 mm 96 mm 2400 N M8 10 pc 20880MP-MI 159 C 156 - 162 mm 223 mm 30 x 2.5 mm 107 mm 2400 N M8 10 pc 229087MP-MI 6” C 162 - 168 mm 6 in 229 mm 30 x 2.5 mm 111 mm 2400 N M8 10 pc 20888MP-MI 193.7 C 190 - 200 mm 263 mm 30 x 3 mm 127 mm 4500 N M8 10 pc 20892MP-MI 212 C 210 - 219 mm 283 mm 30 x 3 mm 136 mm 4500 N M8 10 pc 20894MP-MI 219.1 C 217 - 224 mm 8 in 288 mm 30 x 3 mm 139 mm 4500 N M8 10 pc 20896MP-MI 244.5 C 242 - 250 mm 314 mm 30 x 3 mm 152 mm 4500 N M8 5 pc 20898

Insta

llati

on

S

yste

ms

www.hilti.group


Heavy-duty pipe ring (metric) MP-MXITechnical dataMaterial composition

DD11 - DIN EN 10111



-50 - 120 °C


50° ±5° Shore A




Key applications and advantages■ Heavy-duty installations up to 508 mm■ Process and control lines■ Heavy-duty pipe runs■ Solid connection boss, welded all round■ Strong clamping bolts for high loads


Clamping range - D




Maximum load - F

Distance between holes - A

Sales pack quantity

Item number

MP-MXI 4” M16 108 - 116 mm

4 in 210 mm 40 x 4 mm 90 mm 3100 N 172 mm 25 pc 372229

MP-MXI 125 M16

122 - 126 mm

221 mm 40 x 4 mm 95 mm 3100 N 183 mm 25 pc 372230

MP-MXI 133 M16

132 - 138 mm

231 mm 40 x 4 mm 100 mm 3100 N 193 mm 10 pc 372231

MP-MXI 5” M16 139 - 144 mm

5 in 238 mm 40 x 4 mm 104 mm 3100 N 200 mm 10 pc 372232

MP-MXI 159 M16

159 - 166 mm

261 mm 40 x 4 mm 115 mm 3100 N 223 mm 10 pc 372233

MP-MXI 6” M16 163 - 170 mm

6 in 265 mm 40 x 4 mm 117 mm 7500 N 234 mm 10 pc 372234

MP-MXI 177.8 M16

177 - 182 mm

284 mm 40 x 4 mm 123 mm 7500 N 246 mm 10 pc 372235

MP-MXI 193.7 M16

192 - 200 mm

303 mm 40 x 4 mm 132 mm 7500 N 264 mm 10 pc 372236

MP-MXI 210 M16

210 - 218 mm

321 mm 40 x 4 mm 141 mm 7500 N 283 mm 10 pc 372237

MP-MXI 219 M16

219 - 228 mm

330 mm 40 x 4 mm 146 mm 7500 N 292 mm 10 pc 372238

MP-MXI 244.5 M16

244 - 253 mm

355 mm 40 x 4 mm 158 mm 7500 N 317 mm 10 pc 372239

MP-MXI 267/274 M16

267 - 274 mm

375 mm 40 x 4 mm 167 mm 7500 N 334 mm 10 pc 372240

MP-MXI 275 M16

275 - 282 mm

384 mm 40 x 4 mm 173 mm 7500 N 346 mm 10 pc 372241

MP-MXI 324 M16

315 - 324 mm

441 mm 50 x 5 mm 190 mm 11000 N 391 mm 1 pc 372242

MP-MXI 326 M16

325 - 330 mm

445 mm 50 x 5 mm 192 mm 11000 N 394 mm 1 pc 372243

MP-MXI 368 M16

364 - 372 mm

488 mm 50 x 5 mm 213 mm 11000 N 437 mm 1 pc 372245

MP-MXI 406 M16

400 - 409 mm

525 mm 50 x 5 mm 232 mm 11000 N 474 mm 1 pc 372246

MP-MXI 457 M16

454 - 462 mm

586 mm 70 x 6 mm 259 mm 17000 N 530 mm 1 pc 372247

MP-MXI 508 M16

500 - 508 mm

632 mm 70 x 6 mm 282 mm 17000 N 577 mm 1 pc 372248

Insta

llati

on

S

yste

ms


392

Sprinkler pipe hanger LHTechnical dataMaterial composition

Carbon steel type B - ASTM A653M-06a, SGCC - JISG 3302


Key applications and advantages■ Sprinkler installations■ Cost-efficient pipe installation thanks to

pre-assembled sprinkler band hangers■ Coordinated system of sprinkler com-

ponents from one supplier - reduces administrative work as you are dealing with only one company


Clamping range - D

Nomi-nal pipe size (impe-rial)

Cross section width and thickness (b x s)


Max-imum load - F

Approvals Weight Sales pack quantity

Item number

LH 1/2” M10 20 - 25 mm 1/2 in 16 x 1.2 mm 62 mm 2000 N UL approved EX15279 0.04 kg 100 pc 388612LH 3/4” M10 27 - 28 mm 3/4 in 16 x 1.2 mm 63 mm 2000 N UL approved EX15279,

FM approved0.04 kg 100 pc 388613

LH 1” M10 34 - 35 mm 1 in 16 x 1.2 mm 67 mm 2000 N UL approved EX15279, FM approved

0.05 kg 100 pc 388614

LH 1-1/4” M10

42 - 45 mm 1-1/4 in

16 x 1.2 mm 71 mm 2000 N UL approved EX15279, FM approved

0.05 kg 100 pc 388615

LH 1-1/2” M10

48 - 51 mm 1-1/2 in

16 x 1.2 mm 77 mm 2000 N UL approved EX15279, FM approved

0.05 kg 100 pc 388616

LH 2” M10 57 - 64 mm 2 in 16 x 1.2 mm 79 mm 2000 N UL approved EX15279, FM approved

0.06 kg 100 pc 388617

LH 2-1/2” M10

70 - 76 mm 2-1/2 in

19 x 2 mm 98 mm 4500 N UL approved EX15279, FM approved

0.12 kg 100 pc 388618

LH 3” M10 83 - 89 mm 3 in 19 x 2 mm 117 mm 4500 N UL approved EX15279, FM approved

0.13 kg 50 pc 388619

LH 4” M10 106 - 114 mm

4 in 19 x 2 mm 131 mm 4500 N UL approved EX15279, FM approved

0.15 kg 50 pc 388620

LH 6” M12 165 - 168 mm

6 in 19 x 2.5 mm 190 mm 8000 N UL approved EX15279, FM approved

0.28 kg 25 pc 388621

LH 8” M12 217 - 224 mm

8 in 23 x 3 mm 198 mm 8000 N UL approved EX15279, FM approved

0.47 kg 10 pc 388622

Insta

llati

on

S

yste

ms

www.hilti.group


Sprinkler pipe hanger M10, M12, M16 MP-SPTechnical dataMaterial composition

DX51D Z275 - DIN EN 10327


Approvals FM approved, UL approved EX2709, VDS approved G4930027

Key applications and advantages■ Sprinkler installations■ Insert the pipe, press to close, click -

that’s all Time-saving solution■ Simple levelling with the new height

adjuster

Ordering designation Clamping range - D Nominal pipe size (imperial)

Cross section width and thickness (b x s)


Maximum load - F

Weight Sales pack quantity

Item number

MP-SP 3/4”-M10 27 - 28 mm 3/4 in 21 x 1.5 mm 50 mm 2000 N 0.07 kg 100 pc 229041MP-SP 1”-M10 34 - 35 mm 1 in 21 x 1.5 mm 50 mm 2000 N 0.07 kg 100 pc 229042MP-SP 1 1/4”-M10 42 - 45 mm 1-1/4 in 21 x 1.5 mm 58 mm 2000 N 0.09 kg 50 pc 229043MP-SP 1 1/2”-M10 48 - 51 mm 1-1/2 in 21 x 1.5 mm 65 mm 2000 N 0.09 kg 50 pc 229044MP-SP 2”-M10 57 - 64 mm 2 in 21 x 1.5 mm 73 mm 2000 N 0.1 kg 50 pc 229045MP-SP 2 1/2”-M10 70 - 76 mm 2-1/2 in 20 x 2.5 mm 78 mm 5000 N 0.17 kg 25 pc 216597MP-SP 3”-M10 83 - 89 mm 3 in 20 x 2.5 mm 96 mm 5000 N 0.19 kg 25 pc 216598MP-SP 108-M10 102 - 108 mm 20 x 2.5 mm 122 mm 5000 N 0.23 kg 25 pc 216599MP-SP 4”-M10 108 - 114 mm 4 in 20 x 2.5 mm 131 mm 5000 N 0.24 kg 25 pc 216600MP-SP 133-M12 133 - 133 mm 24 x 2.5 mm 108 mm 6000 N 0.29 kg 25 pc 216601MP-SP 5”-M12 139 - 140 mm 5 in 24 x 2.5 mm 115 mm 6000 N 0.3 kg 25 pc 216602MP-SP 159-M12 159 - 159 mm 24 x 2.5 mm 133 mm 6000 N 0.32 kg 25 pc 216603MP-SP 6”-M12 165 - 169 mm 6 in 24 x 2.5 mm 142 mm 6000 N 0.36 kg 25 pc 216604MP-SP 219,1-M16 219 - 220 mm 35 x 2.5 mm 186 mm 7000 N 0.71 kg 10 pc 216605

Refrigeration pipe ring MI-CFTechnical dataMaterial composition

Closed-cell polyure-thane foam



-80 - 140 °C

Thermal conductivi-t a r va e

0.03 W/mK

Approx. density 80 kg/m³

Compressive strength

0.7 N/mm²

Diffusion resistance Impermeable

Key applications and advantages■ For installing chilled pipes up to 3” di-

ameter in industrial and air conditioning applications

■ Fastening pipes for refrigeration and air-conditioning systems

■ Contains no H-CFCs or CFCs■ Easy initial installation of the pipe

thanks to the two-screw pipe ring with pivot mechanism

Ordering designation Diameter - D Nominal pipe size (imperial)


Maximum load - F

Clamping screw

Tightening torque

Sales pack quantity

Item number

MI-CF 21/25 21.3 mm 1/2 in 111 mm 75 x 25 mm 50 N M16 20 Nm 20 pc 373652

MI-CF 27/25 26.9 mm 3/4 in 123 mm 75 x 25 mm 100 N M6 2 Nm 20 pc 372634

MI-CF 42/25 42.4 mm 1-1/4 in 145 mm 75 x 25 mm 155 N M6 2 Nm 12 pc 372635


MI-CF 60/25 60.3 mm 2 in 162 mm 75 x 25 mm 220 N M6 2 Nm 10 pc 372637


Insta

llati

on

S

yste

ms


394

Refrigeration pipe ring MI-CFTechnical dataMaterial composition

Closed-cell polyure-thane foam



-80 - 140 °C


0.03 W/mK


Compressive strength

0.7 N/mm²

Diffusion resistance Impermeable

Approvals Fire class B2

Key applications and advantages■ Fastening pipes for refrigeration and

air-conditioning systems■ Contains no H-CFCs or CFCs■ Impact-resistant, aluminium-PET-alu-

minium laminations


Diameter - D Nominal pipe size (imperial)


Max-imum load - F

Clamping screw

Tightening torque

Sales pack quantity

Item number

MI-CF 21/30 21.3 mm 1/2 in 136 mm 75 x 30 mm 80 N M6 2 Nm 20 pc 372639MI-CF 27/30 26.9 mm 3/4 in 136 mm 75 x 30 mm 100 N M6 2 Nm 16 pc 372640MI-CF 34/30 33.7 mm 1 in 145 mm 75 x 30 mm 125 N M6 2 Nm 12 pc 372641MI-CF 42/30 42.4 mm 1-1/4 in 162 mm 75 x 30 mm 155 N M6 2 Nm 12 pc 372642MI-CF 48/30 48.3 mm 1-1/2 in 162 mm 75 x 30 mm 180 N M6 2 Nm 12 pc 372643MI-CF 54/30 54 mm 162 mm 75 x 30 mm 160 N M6 2 Nm 12 pc 372644MI-CF 60/30 60.3 mm 2 in 172 mm 75 x 30 mm 220 N M6 2 Nm 10 pc 372645MI-CF 76/30 76.1 mm 2-1/2 in 172 mm 75 x 30 mm 280 N M6 2 Nm 10 pc 372646MI-CF 89/30 88.9 mm 3 in 203 mm 100 x 30 mm 325 N M6 2 Nm 10 pc 372647

Refrigeration pipe ring (medium insulated) MIP-MTechnical dataMaterial composition

CFC-free PUR/PIR (elastomer), outside bearing shells made of painted aluminium sheeting 0.8 mm thick



-40 - 105 °C



0.036 W/mK



Key applications and advantages■ For installing chilled pipes and ducts up

to 410 mm diameter in industrial and air-conditioning applications

■ Designed for standard thicknesses of insulating material (material: elastomeric caoutchouc)

■ Excellent joint between refrigeration pipe ring and insulating material (elasto-meric caoutchouc)


Clamping range - D Nominal pipe size (imperial)


Max. exten-sion from centre - b1


Max-imum load - F

Sales pack quantity

Item number

MIP-M/10-12 10 - 14 mm 1/4 in 94 mm 55 x 20 mm 44 mm 48 mm 40 N 18 pc 314144MIP-M/15-18 15 - 18 mm 3/8 in 102 mm 55 x 20 mm 48 mm 52 mm 50 N 18 pc 314145MIP-M/21-25 21 - 26 mm 1/2 in 107 mm 55 x 20 mm 51 mm 55 mm 75 N 12 pc 314146MIP-M/27-30 27 - 31 mm 3/4 in 113 mm 55 x 21 mm 54 mm 57 mm 75 N 12 pc 314147MIP-M/34-38 33 - 39 mm 1 in 119 mm 65 x 22 mm 57 mm 64 mm 150 N 12 pc 314148MIP-M/42-45 42 - 46 mm 1-1/4 in 134 mm 65 x 22 mm 64 mm 68 mm 200 N 12 pc 314149MIP-M/54-57 53 - 58 mm 154 mm 65 x 23 mm 76 mm 75 mm 300 N 12 pc 314151MIP-M/60-64 59 - 65 mm 2 in 161 mm 75 x 23 mm 79 mm 79 mm 475 N 12 pc 314152MIP-M/76-80 75 - 81 mm 2-1/2 in 176 mm 85 x 24 mm 86 mm 86 mm 750 N 12 pc 314154MIP-M/89 88 - 90 mm 3 in 186 mm 100 x 24 mm 91 mm 91 mm 1100 N 10 pc 314155MIP-M/102-108 101 - 109 mm 216 mm 100 x 25 mm 107 mm 107 mm 1300 N 8 pc 314156MIP-M/114 113 - 115 mm 4 in 214 mm 116 x 25 mm 105 mm 105 mm 1700 N 6 pc 314157MIP-M/133 130 - 134 mm 235 mm 116 x 25 mm 119 mm 116 mm 2000 N 6 pc 314684MIP-M/140 138 - 141 mm 5 in 254 mm 116 x 25 mm 133 mm 126 mm 2000 N 6 pc 314159MIP-M/159-160 158 - 161 mm 274 mm 118 x 25 mm 138 mm 136 mm 2200 N 6 pc 314160MIP-M/165-168 164 - 169 mm 6 in 274 mm 128 x 25 mm 138 mm 136 mm 2600 N 3 pc 314161MIP-M/216-219 216 - 219 mm 363 mm 170 x 25 mm 182 mm 154 mm 5000 N 3 pc 314162MIP-M/267-273 267 - 275 mm 428 mm 170 x 25 mm 210 mm 183 mm 6000 N 1 pc 314163

Insta

llati

on

S

yste

ms

www.hilti.group


Standard duty clevis hanger SDCTechnical dataMaterial composition

Q235B - ASTM A36


Key applications and advantages■ Heavy-duty support for piping systems■ All models are for use with ANSI/MSS

SP-58 (Type 1) heavy-duty sizes■ Attachment to threaded rod porvides

easy installation and hight adjustment

Ordering designation Nominal pipe size (imperial)


Cross section width - b

Rod size - RS

Approvals Allowable load Weight Sales pack quantity

Item number

SDC 1/2” EG 1/2 in 41 mm 19 mm M10 UL approved EX15279

2.8 kN 0.07 kg 50 pc 388634

SDC 3/4” EG 3/4 in 47 mm 19 mm M10 UL approved EX15279

2.8 kN 0.07 kg 50 pc 388635

SDC 1” EG 1 in 51 mm 19 mm M10 UL approved EX15279

2.8 kN 0.08 kg 50 pc 388636

SDC 1- 1/4” EG 1-1/4 in 59 mm 25 mm M10 UL approved EX15279

2.8 kN 0.12 kg 25 pc 388637

SDC 1- 1/2” EG 1-1/2 in 65 mm 25 mm M10 UL approved EX15279

2.8 kN 0.13 kg 25 pc 388638


2.8 kN 0.17 kg 25 pc 388639

SDC 2- 1/2” EG 2-1/2 in 96 mm 30 mm M12 UL approved EX15279, FM approved

4.8 kN 0.39 kg 10 pc 388640

SDC 3” EG 3 in 109 mm 30 mm M12 UL approved EX15279, FM approved

4.8 kN 0.43 kg 10 pc 388641


4.8 kN 0.6 kg 10 pc 388642


6.3 kN 0.95 kg 5 pc 388643


8.5 kN 1.73 kg 5 pc 388644


9 kN 2.5 kg 2 pc 388645


16.5 kN 4.5 kg 2 pc 388646


16.5 kN 5 kg 2 pc 388647

CHANNEL INSTALLTIONSystem MQ/MC Hot Dip Galvanized


Installation channel MQ-21 HDG ASTMTechnical dataMaterial composition

S235JR - DIN EN 10025

Surface finish Hot-dip galvanized, 65 µm - ASTM A123

Key applications and advantages■ Pipework■ Air ducts■ Cable trays■ C-profile with serrated edges■ Aesthetic appearance


Item number

MQ-21 6m HDG ASTM

21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 288388


S235JR - DIN EN 10025




Item number

MQ-41 6m HDG ASTM

41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 288386


S235JR - DIN EN 10025




Item number

MQ-52 6m HDG ASTM

52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m 430799

Insta

llati

on

S

yste

ms


398


S235JR - DIN EN 10025




Item number

MQ-72 6m HDG ASTM

72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m 430804

Installation channel MQ-21-HDG plusTechnical dataMaterial composition

S235JR - DIN EN 10025

Surface finish Continuous hot-dip galvanized, approx. 70 µm - DIN EN 10346



Item number

MQ-21-HDG plus 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 304098

Installation channel MQ-31-HDG plusTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ Pipe work■ Air ducts■ Cable trays■ C-profile with serrated edges■ Aesthetic appearance


Item number

MQ-31-HDG plus 6m 31 mm 6 m 2 mm 1760 g RAL-GZ 655-C 6 m 284530

Insta

llati

on

S

yste

ms

www.hilti.group


Installation channel MQ-41-HDG plusKey applications and advantages■ Pipework■ Air ducts■ Cable trays■ C-profile with serrated edges■ Aesthetic appearance

Installation channel MQ-21 D-HDG plusTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ Pipework■ Air ducts■ Cable trays■ C-profile with serrated edges■ Pre-marked dimensions make installa-



Item number

MQ-21-D-HDG plus 6m

41 mm 6 m 2 mm 2980 g RAL-GZ 655-C 6 m 284385

Hot-dip galvanized double installation channel (HDG plus) MQ-41 D-HDG plusTechnical dataMaterial composition

S235JR - DIN EN 10025





Item number

MQ-41 D-HDG plus 6m

83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m 304111

Technical dataMaterial composition

S235JR - DIN EN 10025



Item number

MQ-41-D-HDG plus 6m

41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 304101

Insta

llati

on

S

yste

ms


400

Hot-dip galvanized installation channel MQ-21-FTechnical dataMaterial composition

S235JR - DIN EN 10025

Surface finish Hot-dip galvanized, 45 µm - DIN EN ISO 1461



Item number

MQ-21-F 6m 21 mm 6 m 2 mm 1480 g RAL-GZ 655-C 6 m 304097


S235JR - DIN EN 10025




Item number

MQ-41-F 6m 41 mm 6 m 2 mm 2130 g RAL-GZ 655-C 6 m 304100


S235JR - DIN EN 10025




Item number

MQ-52-F 6m 52 mm 6 m 2.5 mm 3010 g RAL-GZ 655-C 6 m 304103

Insta

llati

on

S

yste

ms

www.hilti.group



S235JR - DIN EN 10025




Item number

MQ-72-F 6m 72 mm 6 m 2.75 mm 4200 g RAL-GZ 655-C 6 m 304105

Hot-dip galvanized installation channel MQ-21 D-FTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-21 D-F 6m 41 mm 6 m 2 mm 2970 g RAL-GZ 655-C 6 m 304108

Hot-dip galvanized installation channel MQ-41 D-FTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-41 D-F 6m 83 mm 6 m 2 mm 4290 g RAL-GZ 655-C 6 m 304110

Insta

llati

on

S

yste

ms


402

Hot-dip galvanized double installation channel MQ-52-72 D-FTechnical dataMaterial composition

S250GD - DIN EN 10346





Item number

MQ-52-72 D-F 6m 124 mm 6 m 2.5 mm, 2.75 mm 7260 g RAL-GZ 655-C 6 m 304112

Hot-dip galvanized bracket MQK-21-FTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ For stand-alone use on ceilings, walls

and floors or in conjunction with chan-nel systems


■ Serrated C-section■ Pre-marked dimensions make installa-

tion, assembly and measurement easy


Item number

MQK-21/300-F MQ-21-F 300 mm Channel: 2 mm, Baseplate: 6 mm 746 g 10 pc 304113



S235JR - DIN EN 10025








Item number





Insta

llati

on

S

yste

ms

www.hilti.group



S235JR - DIN EN 10025








Item number

MQK-72/450-F MQ-72-F 450 mm Channel: 2.75 mm, Baseplate: 10 mm 2755 g 6 pc 304122

MQK-72/600-F MQ-72-F 600 mm Channel: 2.75 mm, Baseplate: 10 mm 3235 g 6 pc 304123

Hot-dip galvanized angle brace MQK-S-FTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ Recommended for fabricating wall

brackets with individual stand-off lengths

■ Increases the loadbearing capacity of brackets

■ Easily customized stand-alone structures

■ Channel assembly in two positions is possible


Item number

MQK-SK-F 328 mm 324 mm 355 mm 3 mm 620 g 10 pc 304129

MQK-SL-F 528 mm 524 mm 635 mm 3 mm 1069 g 10 pc 304128

Channel connector HDG plus MQN-HDG plusTechnical dataMaterial composition

Bolt: grade 8.8 - DIN EN ISO 898, Nut: C4C - DIN EN 10263, Plate: DD11 - DIN EN 10111

Surface finish Multi-layer coating – performance in salt spray test equal to hot-dip galvanizing


Coating designed for corrosion environment category C3 according to EN ISO 9223

Key applications and advantages■ Recommended for connecting angles

to channels■ One-piece component for connecting

channels and structural elements■ Simple, compact, time-saving■ Provides a secure hold once pressed in,

turned and tightened

Ordering designation Wrench size Tightening torque Weight Sales pack quantity

Item number

MQN-HDG plus 17 mm 40 Nm 67 g 50 pc 387779

Insta

llati

on

S

yste

ms


404

Wing nut MQM-DG plusTechnical dataMaterial composition

Wings: plastic PA, Nut: QStE 380 TM, SEW 92

Surface finish Multi-layer coating


Coating designed for corrosion environment category C3 according to EN ISO 9223


parts of structures■ Simple, compact, time-saving■ Flush design of channel wing nut


Item number

MQM-M6 HDG plus M6 10 Nm 25 g 50 pc 298499



Hot-dip galvanized wing nut MQM-FTechnical dataMaterial composition

Wings: plastic PA, Nut: C4C - DIN EN 10263



parts of structures■ Simple, compact and time-saving■ Flush design of channel wing nut


Item number

MQM-M12-F M12 40 Nm 36 g 25 pc 304134

Hot-dip galvanized pipe ring saddle MQA-FTechnical dataMaterial composition

Nut: EN-GJMW-450-7 - DIN EN 1562, Plate: S235JR - DIN EN 10025, Plastic: PB


Key applications and advantages■ Various suspensions with threaded rods■ Pipe ring saddle for pipe installation■ For metric threads■ One-piece, time-saving and easy to

handle■ Only one type of saddle nut for all MQ

channels


Item number

MQA-M8-F M8 9 Nm 95 g 25 pc 304138

MQA-M10-F M10 18 Nm 92 g 25 pc 304139MQA-M12-F M12 31 Nm 87 g 25 pc 304140MQA-M16-F M16 40 Nm 82 g 25 pc 304141

Insta

llati

on

S

yste

ms

www.hilti.group


Hot-dip galvanized angle MQW 90°-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Assembly of frames as well as other

assemblies■ Quick installation■ Suitability for universal use results in

fewer parts for a variety of applications


Item number

MQW-2-F 90 ° 110 g 20 pc 304171

MQW-P2-F 90 ° 160 g 10 pc 304177

MQW-3-F 90 ° 160 g 20 pc 304172

MQW-4-F 90 ° 263 g 10 pc 304174

MQW-8/90-F 90 ° 420 g 10 pc 304175

Hot-dip galvanized angle MQW 45°/135°-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ Quick installation■ Universal: only a few parts required for

many different applications


Item number

MQW-3/45-F 45 ° 155 g 20 pc 304173

Insta

llati

on

S

yste

ms


406


Item number

MQW-2/45-F 45 ° 354 g 10 pc 304178

MQW-8/45-F 45 ° 410 g 10 pc 304176

Hot-dip galvanized angle bracket MQW-S-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ For fastening to walls, floors and

ceilings■ Quick installation■ Universal: few parts for all applications


Item number

MQW-S/1-F 90 ° 430 g 10 pc 304180

MQW-S/2-F 90 ° 1190 g 10 pc 304181

Connector 2-D HDG MQV-2D-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For clever single-plane channel design■ Universal: few parts for various



Item number

MQV-2/2 D-F 90 ° 450 g 10 pc 304150

MQV-3/2 D-F 90 ° 602 g 10 pc 304152

Insta

llati

on

S

yste

ms

www.hilti.group


Hot-dip galvanized 3-D connector MQV-3D-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For clever 3D channel design■ Universal: few parts for various



Item number

MQV-3/3 D-F 90 ° 465 g 10 pc 304153

MQV-4/3 D-F 90 ° 770 g 10 pc 304154

Hot-dip galvanized longitudinal connector MQV-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Connecting two MQ channels together■ Quick extension of installation channels■ Easy to handle


Item number

MQV-12-F 583 g 10 pc 304155

Hot-dip galvanized longitudinal connector MQV-FTechnical dataMaterial composition

S235JR - DIN EN 10025




together■ Simple extension of channel length■ The MQN-F pushbutton can be prefitted


Item number

MQV-P4-F 188 g 10 pc 304156

Insta

llati

on

S

yste

ms


408

Hot-dip galvanized flat connector MQV-T-FTechnical dataMaterial composition

S235JR - DIN EN 10025






Item number

MQV-T-F 196 g 10 pc 304157

Hot-dip galvanized rail support MQV 2/2 D-FTechnical dataMaterial composition

S235JR - DIN EN 10025






Item number

MQV-2/2 D-14-F 450 g 10 pc 304151

Hot-dip galvanized rail support MQP-1-FTechnical dataMaterial composition

S235JR - DIN EN 10025






Item number

MQP-1/1-F 120 g 20 pc 304161

MQP-1/3-F 190 g 20 pc 304162

Insta

llati

on

S

yste

ms

www.hilti.group


Hot-dip galvanized rail support MQP-FTechnical dataMaterial composition

S235JR - DIN EN 10025





Item number

MQP-21-72-F 1150 g 12 pc 304165

MQP-82-F 1880 g 8 pc 304166

MQP-124-F 2730 g 6 pc 304167

Hot-dip galvanized rail support MQP-G-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ For constructing channel structures for

attachment to almost any supporting materials

■ For connecting structures to inclined surfaces

■ Channel connection on rotatable base■ High application flexibility


Item number

MQP-G-F 1055 g 10 pc 304168

Pivoting channel connector HDG MQP-U2-FKey applications and advantages■ Connection of MQ channels at various

angles■ Pivoting connection between MQ chan-

nels and concrete■ Universal pivoting channel connection

with high load capacity■ Suitable for fastening to various struc-

tures such as other MQ channels, MI girders, concrete and steel components

Ordering designation Weight Sales pack quantity Item number

MQP-U2-F 614 g 20 pc 2062899


S235JR/DDM


Material thickness 3.0 mm

Insta

llati

on

S

yste

ms


410

Hot-dip galvanized beam clamp MQT-FTechnical dataMaterial composition

U-bolt: S235JRG2 - DIN EN 10025






■ No drilling or welding neccessary■ Versatile, no small parts to lose


Item number

MQT-21-41-F M8 13 mm 10 Nm 360 g 10 pc 304190

MQT-41-82-F M10 17 mm 20 Nm 602 g 10 pc 304191

Clamp (channel to channel) HDG MQB-FTechnical dataMaterial composition

S235JR - DIN EN 10025



Key applications and advantages■ Channel cross connection■ Universal: few parts for all applications■ Suitable for various MQ channel profiles


Item number

MQB-41-F 240 g 10 pc 304183

MQB-41x2-F 295 g 10 pc 304188

MQB-124-F 553 g 10 pc 304187

Insta

llati

on

S

yste

ms

www.hilti.group


Hot-dip galvanized drilled plate MQZ-L-FTechnical dataMaterial composition

S235JR - DIN EN 10025


Key applications and advantages■ For fastening metric threaded parts to

MQ channel■ Matching items in program■ Suitable for MQ installation channels

and brackets


Item number

MQZ-L9-F 9.5 mm 92 g 20 pc 304196

MQZ-L11-F 11.5 mm 88 g 20 pc 304197

MQZ-L13-F 13.5 mm 84 g 20 pc 304198

MQZ-L17-F 17.5 mm 80 g 20 pc 304199

Hot-dip galvanized 3D-System MQ3D-FTechnical dataSurface finish Hot-dip galvanized, 56

µm - ASTM A153Material thickness 3 mm

Key applications and advantages■ Assembly of 3-D structures on site■ Bracing and stiffening of complex fas-

tening solutions■ Designing three-dimensional support

frames■ Universal: few parts for all applications■ Quick and easy to use

Ordering designation Angle Thread - M Wrench size Tightening torque Weight Sales pack quantity

Item number

MQ3D-W45-F 45 ° M10 17 mm 40 Nm 156 g 16 pc 304211

MQ3D-A-F 45 ° M10 17 mm 40 Nm 98 g 20 pc 304212

Insta

llati

on

S

yste

ms


412

Channels

MC-3D-41 OC-A 3m 2063297MC-3D-41 OC-A 6m 2063296

MC-72 OC-A 6m 2063299 MC-B-3D-41/350 OC-A 2063720MC-B-3D-41/450 OC-A 2063721MC-B-3D-41/650 OC-A 2063722MC-B-3D-41/1000 OC-A 2063723

MC-BE-320 OC-A 2063729MC-BE-630 OC-A 2063730

MC-CL OC-A 2063760

Base Connector Channel Connectors Angles

MQZ-E31 369686 MQZ-E41 369685

Wing nuts Channel screws Channel stiffener Channel plate

MC-CB OC-A 2061833 MC-CH OC-A 2063281 MC-CU OC-A 2063762 MC-A-90 OC-A 2063770 MC-AH-90 OC-A 2063733 MC-AF-90 OC-A 2063740

MC-WN-M10 OC 2063742 MC-WN-3D OC 2063735

End cap

MC-SI-M10 OC-A 2063739 MC-S-M10 OC-A 2063737 MC-PI OC-A 2063718 MC-PU OC-A 2063224

Overview System MC Hot Dipped Galvanized

Brackets Longitudinal connector

Accessories MC-MI connector MI accessories

M10x20-F 2063241 M10x65-F 2063242M12x105-F 2063244

A10.5/28-F 2063247 MC-MI-AH-90 OC-A 2063283 MIA-EH90 304887MIA-EH-P 304891

M10-SL-F 2063245M12-F-SL-WS 3/4” 382897

Insta

llati

on

S

yste

ms

www.hilti.group


Installation channel HDG MC-3D-41 OC-ATechnical dataMaterial composition



Key applications and advantages■ Cable tray supports outdoors■ Integrated floor supports■ Instrumentation supports outdoors■ Connectivity from all channel sides■ High flexibility in terms of fastening type

and direction


Item number

MC-3D-41 OC-A 3m 41 mm 3 m 1.6 mm 1713 g 3 m 2063297

MC-3D-41 OC-A 6m 41 mm 6 m 1.6 mm 1760 g 6 m 2063296

Installation channel HDG MC-72 OC-ATechnical dataMaterial composition



Key applications and advantages■ Cable tray supports outdoors■ Integrated floor supports■ Instrumentation supports outdoors■ Serrated C-section profile■ High load capacity


Item number

MC-72 OC-A 6m 72 mm 6 m 2.75 mm 4108 g 6 m 2063299

Bracket HDG MC-B-3D-41 OC-ATechnical dataMaterial composition

Structural steel with a minimum yield strength of 275 N/mm2 for the channel, 355 N/mm2 for the plate


Key applications and advantages■ Cable tray supports outdoors■ Instrumentation supports outdoors■ Integrated floor supports■ Connectivity from all channel sides■ High flexibility


Item number

MC-B-3D-41/350 OC-A MC-3D-41 350 mm 1.6 mm 1033 g 12 pc 2063720




Insta

llati

on

S

yste

ms


414

Electrical bracket HDG MC-BE OC-ATechnical dataMaterial composition



Key applications and advantages■ Cable tray supports outdoors■ Easy to install■ Various fastening options


Item number

MC-BE-320 OC-A 97 mm 322 mm 50 mm 1.5 mm 557 g 12 pc 2063729

MC-BE-630 OC-A 147 mm 632 mm 100 mm 1.5 mm 1138 g 12 pc 2063730

Longitudinal channel connector HDG MC-CL OC-ATechnical dataMaterial composition




Key applications and advantages■ Longitudinal connector for MC channels■ Easy to use on the open side or back of

the channel■ Compatible with all MC channels


Item number

MC-CL OC-A 675 g 20 pc 2063760

Base connector HDG MC-CB OC-ATechnical dataMaterial composition



Key applications and advantages■ Connection of MC channels to concrete■ Fastening to floors, ceilings or walls■ Various, easy installation options■ Height adjustment


Item number

MC-CB OC-A 925 g 12 pc 2061833

Insta

llati

on

S

yste

ms

www.hilti.group


Angle HDG MC-A-90 OC-ATechnical dataMaterial composition






modular system structures■ Various, easy installation options■ Can be fitted regardless of the direction

in which the open side of the channel is facing


Item number

MC-A-90 OC-A 90 ° 324 g 10 pc 2063770

Height-adjustable angle HDG MC-AH-90 OC-ATechnical dataMaterial composition






modular system structures■ High application flexibility■ Easy height adjustment along the full

channel length and on all channel sides


Item number

MC-AH-90 OC-A 90 ° 168 g 20 pc 2063733

Height-adjustable angle HDG MC-MI-AH-90 OC-ATechnical dataMaterial composition




Key applications and advantages■ Connection of MC channels to Hilti MI

channels at 90 degrees■ Easy to use■ Easy height adjustment


Item number

MC-MI-AH-90 OC-A 90 ° 222 g 10 pc 2063283

Insta

llati

on

S

yste

ms


416

Flat angle HDG MC-AF-90 OC-ATechnical dataMaterial composition





degrees■ Various, easy installation options■ High application flexibility


Item number

MC-AF-90 OC-A 90 ° 128 g 20 pc 2063740

Height-adjustable connector HDG MC-CH OC-ATechnical dataMaterial composition




Key applications and advantages■ Cross-connector for MC channels■ Three-dimensional structures such as

integrated floor supports■ Easy to install■ Height adjustment


Item number

MC-CH OC-A 710 g 20 pc 2063281

Universal connector HDG MC-CU OC-ATechnical dataMaterial composition




Key applications and advantages■ Connection of MC-3D channel to Hilti

MC and MI installation channels■ Connection of MC-3D channel to

concrete■ Bracing for modular system structures■ Various, easy installation options■ High flexibility in terms of fastening type

and direction


Item number

MC-CU OC-A 338 g 12 pc 2063762

Insta

llati

on

S

yste

ms

www.hilti.group


Wing nut MC-WN-M10 OCTechnical dataMaterial composition


Surface finish Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223


the open side of MC channel■ Fastening connectors at the open side

of MC channel, anywhere along its length

■ Easy-to-use single part■ For universal use with all channel sizes


Item number

MC-WN-M10 OC M10 40 Nm 22 g 50 pc 2063742

Wing nut MC-WN-3D OCTechnical dataMaterial composition


Surface finish Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223


any side of MC-3D channel■ Fastening connectors at any side of

MC-3D channel■ Assembly of two and three-dimensional

modular system structures■ High application flexibility■ Easy-to-use single part


Item number

MC-WN-3D OC M10 40 Nm 41 g 20 pc 2063735

Universal plate HDG MC-PU OC-ATechnical dataMaterial composition



Key applications and advantages■ Load distribution plate for use where

bolts and threaded rods are fitted through MC channel

■ Various, easy installation options■ Can be fitted on all sides of MC-3D

channel

Ordering designation Material thickness Hole diameter - D Weight Sales pack quantity

Item number

MC-PU OC-A 4 mm 13.5 mm 34 g 100 pc 2063224

Insta

llati

on

S

yste

ms


418

Channel insert screw MC-SI-M10 OC-ATechnical dataMaterial composition

Steel grade 8.8



modular system structures■ Fitting connectors to the back or side of

MC-3D channel■ Strong and cost-efficient connection■ High application flexibility


Item number

MC-SI-M10 OC-A M10 17 g 100 pc 2063739

Channel connection screw MC-S-M10 OC-ATechnical dataMaterial composition

Steel grade 8.8



modular system structures■ Fitting connectors to the back of MC

channels■ Strong and cost-efficient connection■ High application flexibility


Item number

MC-S-M10 OC-A M10 47 g 100 pc 2063737

Channel stiffener insert MC-PI OC-ATechnical dataMaterial composition



Key applications and advantages■ Channel stiffening insert for use where

bolts and threaded rods are fitted through MC channels

■ Easy-to-use single part■ Surface level with channel after

installation


Item number

MC-PI OC-A 18 g 50 pc 2063718

Insta

llati

on

S

yste

ms

www.hilti.group


Hot-dip galvanized threaded rod AMTechnical dataMaterial composition

Steel grade 4.8

Surface finish Hot-dip galvanized

Ordering designation Thread - M Length - L Weight Sales pack quantity

Item number

AM10x1000-F 4.8 M10 1000 mm 435 g 20 pc 304773

AM10x2000-F 4.8 M10 2000 mm 950 g 20 pc 414784

AM12x1000-F 4.8 M12 1000 mm 687 g 15 pc 304774

AM12x2000-F 4.8 M12 2000 mm 1433 g 15 pc 304775

AM16x1000-F 4.8 M16 1000 mm 1320 g 5 pc 304776

AM16x2000-F 4.8 M16 2000 mm 2622 g 5 pc 304777

AM20x1000-F 4.8 M20 1000 mm 2066 g 5 pc 304778

AM20x2000-F 4.8 M20 2000 mm 4109 g 5 pc 304779

Hot-dip galvanized flat washer DIN 125Technical dataMaterial composition

Steel - DIN EN ISO 7089



Item number

A 8,4/16-F 8.4 mm 16 mm 1.6 mm 2 g 100 pc 2142951

A 10,5/20-F 10.5 mm 20 mm 2 mm 3 g 100 pc 2142952

A 13/24-F 13 mm 24 mm 2.5 mm 6 g 100 pc 2142953

A 17/30-F 17 mm 30 mm 3 mm 10 g 100 pc 2142954

Flat washer similar to ISO 7089 (HDG) Technical dataMaterial composition

Steel



Item number

A 10,5/28-F 10.5 mm 28 mm 2 mm 8 g 100 pc 2063247

Insta

llati

on

S

yste

ms


420

Hot-dip galvanized hexagon nutTechnical dataMaterial composition

Steel grade 8

Surface finish Hot-dip galvanized - DIN EN ISO 10684


Item number

M8-F M8 7 mm 13 mm 5 g 100 pc 2142984

M10-F M10 8 mm 17 mm 11 g 100 pc 2142985

M12-F M12 10 mm 19 mm 16 g 100 pc 2142986

M16-F M16 13 mm 24 mm 30 g 50 pc 2142987

M20-F M20 16 mm 30 mm 55 g 50 pc 304768

Prevailing torque hexagon nut HDG M10-SL-FTechnical dataMaterial composition

Steel grade 8


Key applications and advantages■ Self-locking function through the nut

insert


Item number

M10-SL-F 40 Nm 16 g 100 pc 2063245

Hot-dip galvanized hexagon bolt Technical dataMaterial composition

Steel grade 8.8


Insta

llati

on

S

yste

ms

www.hilti.group



Item number

M8x25-F M8 25 mm 5 mm 13 mm 13 g 100 pc 2142976

M10x20-F M10 20 mm 6 mm 17 mm 20 g 100 pc 2063241

M10x25-F M10 25 mm 6 mm 17 mm 23 g 100 pc 2142977

M12x25-F M12 25 mm 8 mm 19 mm 35 g 50 pc 2142978

M12x30-F M12 30 mm 8 mm 19 mm 36 g 50 pc 284387

M16x30-F M16 30 mm 10 mm 24 mm 76 g 25 pc 304790

Hexagon screw DIN 931 HDG Technical dataMaterial composition

Steel grade 8.8


Ordering designation Thread - M Thread length - L A Height - H Wrench size - W Weight Sales pack quantity

Item number

M10x65-F M10 27 mm 65 mm 6 mm 17 mm 45 g 100 pc 2063242

M12x105-F M12 32 mm 105 mm 7 mm 19 mm 105 g 50 pc 2063244

Hot-dip galvanized spacer coupling Technical dataMaterial composition

Steel grade 4.6


Key applications and advantages■ Accessories for pipe installation


Item number

M8x25-F M8 25 mm 11 mm 9 g 50 pc 304791

M10x30-F M10 30 mm 13 mm 14 g 50 pc 304792

M16x50-F M16 50 mm 20 mm 78 g 20 pc 304794

Heavy-duty pipe ring M10/M12, M16 HDG MP-MX-FTechnical dataMaterial composition

DD11 - DIN EN 10111



ters up to 508 mm■ Indoor applications in humid atmos-

pheres (moderate condensation)■ Outdoor applications in moderately

corrosive conditions■ Solid connection boss, welded all round■ Strong clamping bolts for high loads

Insta

llati

on

S

yste

ms


422


Clamping range - D



Max-imum load - F

Distance between holes - A

Clamping screw

Sales pack quantity

Item number

MP-MX-F 267/274 M16

267 - 274 mm

363 mm 40 x 4 mm 162 mm 11000 N 325 mm M16 10 pc 374957

Heavy-duty pipe ring, metric HDG MP-MXI-FTechnical dataMaterial composition

DD11 - DIN EN 10111



-50 - 120 °C


50° ±5° Shore A





ters up to 508 mm■ Indoor applications in humid atmos-


corrosive conditions■ Solid connection boss, welded all round■ Strong clamping bolts for high loads


Clamping range - D




Maximum load - F

Distance be-tween holes - A

Sales pack quantity

Item number

MP-MXI-F 4” M16

108 - 116 mm

4 in 210 mm 40 x 4 mm 90 mm 3100 N 172 mm 25 pc 374900

MP-MXI-F 125 M16

122 - 126 mm

221 mm 40 x 4 mm 95 mm 3100 N 183 mm 25 pc 374901

MP-MXI-F 6” M16

163 - 170 mm

6 in 265 mm 40 x 4 mm 117 mm 7500 N 234 mm 10 pc 374905

MP-MXI-F 219 M16

219 - 228 mm

330 mm 40 x 4 mm 146 mm 7500 N 292 mm 10 pc 374909

MP-MXI-F 267/274 M16

267 - 274 mm

375 mm 40 x 4 mm 168 mm 7500 N 334 mm 10 pc 374911

Hot-dip galvanized heavy-duty pipe ring MP-MI-FTechnical dataMaterial composition

S235JR - DIN EN 10025



-50 - 120 °C


50° ±5° Shore A




Key applications and advantages■ Heavy-duty installations up to 250 mm

diameter■ Indoor applications in humid atmos-


corrosive conditions■ Solid welded-on connection boss■ Good resistance to corrosion (hit-dip

galvanized to 45 µm)


Clamping range - D




Maximum load - F

Clamping screw

Sales pack quantity

Item number

MP-MI-F 1” 32 - 38 mm

1 in 83 mm 24 x 2 mm 34 mm 1800 N M8 25 pc 304260

MP-MI-F 1 1/2”

48 - 54 mm

1-1/2 in 101 mm 24 x 2 mm 42 mm 1800 N M8 25 pc 304262

MP-MI-F 80/84

78 - 84 mm

139 mm 24 x 2 mm 58 mm 1800 N M8 1 pc 304267

Insta

llati

on

S

yste

ms

www.hilti.group


Heavy-duty pipe ring HDG MP-M-FKey applications and advantages■ Heavy duty installation up to 3”■ Indoor applications in humid atmos-


corrosive conditions■ Solid welded-on connection boss■ Good resistance to corrosion (hot-dip

galvanised 45 µm)


S235JR - DIN EN 10025


Maximum load - F 1800 N

Clamping screw M8

Tightening torque 3 Nm

Ordering designation Clamping range - D Distance centre pipe to top - h Sales pack quantity Item numberHDGMP-M-F 1” 32 - 38 mm 32 mm 25 pc 304271

HDGMP-M-F 1 1/4” 40 - 45 mm 35 mm 25 pc 304272

HDG MP-M-F 1 1/2” 48 - 54 mm 39 mm 1 pc 304273

HDG MP-M-F 2” 57 - 64 mm 45 mm 1 pc 304275

HDG MP-M-F 2 1/2” 70 - 77 mm 50 mm 1 pc 304277

HDG MP-M-F 3” 82 - 90 mm 55 mm 1 pc 304278

CHANNEL INSTALLTIONSystem MQ Stainless Steel


Installation channel (A2 stainless steel) MQ-21-RA2Technical dataMaterial composition

Stainless steel, 1.4301 (A2) - EN 10088

Key applications and advantages■ Recommended for installation in indus-

trial atmospheres or areas with heavy condensation

■ Pipework■ Air ducts■ C-profile with serrated edges■ Pre-marked dimensions make installa-



Item number

MQ-21-RA2 6m 21 mm 6 m 2 mm 1450 g RAL-GZ 655-C 6 m 303991

Installation channel (A2 stainless steel) MQ-41-RA2Technical dataMaterial composition

Stainless steel, 1.4301 (A2) - EN 10088






Item number

MQ-41-RA2 6m 41 mm 6 m 2 mm 2090 g RAL-GZ 655-C 6 m 303995

Installation channel (A4 stainless steel) MQ-21-RTechnical dataMaterial composition

Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L






Item number

MQ-21-R 6m 21 mm 6 m 2 mm 1470 g RAL-GZ 655-C 6 m 303989

Insta

llati

on

S

yste

ms


426








Item number

MQ-41-R 6m 41 mm 6 m 2 mm 2120 g RAL-GZ 655-C 6 m 303993








Item number

MQ-52-R 6m 52 mm 6 m 2.5 mm 3000 g RAL-GZ 655-C 6 m 303997

Installation channel (A4 stainless steel) MQ-21 D-RTechnical dataMaterial composition







Item number

MQ-21 D-R 6m 41 mm 6 m 2 mm 2960 g RAL-GZ 655-C 6 m 303999

Insta

llati

on

S

yste

ms

www.hilti.group


Installation channel (A4 stainless steel) MQ-41 D-RKey applications and advantages■ Recommended for installation in indus-




Bracket (A4 stainless steel) MQK-41-RTechnical dataMaterial composition


Key applications and advantages■ For the installation of cable trays, air

ducts and pipe supports■ For installation in industrial atmos-

pheres or areas with high condensation■ Serrated C-section■ Pre-marked dimensions make installa-



Item number

MQK-41/300-R MQ-41-R 300 mm Channel: 2 mm, Baseplate: 8 mm 997 g 10 pc 304005



Channel connector (A4 stainless steel) MQN-RTechnical dataMaterial composition

Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L

Key applications and advantages■ One-piece component for connecting

channels and structural elements■ Universal: one and the same nut for all

channels■ Holds securely once pushed in, turned

and tightened


Item number

MQN-R M10 17 mm 40 Nm 77 g 25 pc 304012


Stainless steel, 1.4404 (A4) - EN 10088, AISI 316L

Ordering designation Height Length Material Thickness Weight per metre length Approvals Sales pack quantity

Item number

MQ-41D-R 6m 83 mm 6 m 2 mm 4275 g RAL-GZ 655-C 6 m 304003

Insta

llati

on

S

yste

ms


428

Wing nut (A4 stainless steel) MQM-RTechnical dataMaterial composition

Nut: 1.4581 (A4) - DIN EN 10283, Wings: plastic PA

Key applications and advantages■ Simple part for connecting channels

with structural elements■ For direct connection to channels■ In-plane connection to channel possible


Item number

MQM-M6-R M6 10 Nm 29 g 25 pc 304014

MQM-M8-R M8 20 Nm 28 g 25 pc 304015

MQM-M10-R M10 40 Nm 24 g 25 pc 304016

MQM-M12-R M12 40 Nm 31 g 25 pc 304017

Pipe ring saddle (A4 stainless steel) MQA-RTechnical dataMaterial composition

Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L, Plastic: PB

Key applications and advantages■ Various suspensions with threaded rods■ Pipe ring saddle for pipe installation■ One-piece design■ Easy to use, time-saving


Item number

MQA-M8-R M8 9 Nm 85 g 25 pc 304021

MQA-M10-R M10 18 Nm 82 g 25 pc 304022

MQA-M12-R M12 31 Nm 72 g 25 pc 304023

MQA-M16-R M16 40 Nm 76 g 25 pc 304024

Angle (A4 stainless steel) MQW 90°-RTechnical dataMaterial composition



Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ Quick installation■ Only few parts required for any

application

Insta

llati

on

S

yste

ms

www.hilti.group



Item number

MQW-2-R 90 ° 110 g 10 pc 304051

MQW-3-R 90 ° 160 g 10 pc 304052

MQW-4-R 90 ° 249 g 10 pc 304054

Angle (A4 stainless steel) MQW 45°/135°-RTechnical dataMaterial composition



Key applications and advantages■ Assembly of frames and structures■ Connection of channels■ Quick installation■ Only few parts required for any

application


Item number

MQW-3/45-R 45 ° 155 g 20 pc 304053

MQW-8/45-R 45 ° 410 g 10 pc 304056

Connector 2-D (A4 stainless steel) MQV-2D-RTechnical dataMaterial composition






Item number

MQV-2/2 D-R 440 g 10 pc 304032

Insta

llati

on

S

yste

ms


430


Item number

MQV-3/2 D-R 602 g 10 pc 304034

Rail support (A4 stainless steel) MQV-RTechnical dataMaterial composition






Item number

MQV-2/2 D-14-R 40 Nm 440 g 10 pc 304033

Rail support (A4 stainless steel) MQP-RTechnical dataMaterial composition





Item number

MQP-21-72-R 1150 g 12 pc 304047

MQP-82-R 1880 g 8 pc 304048

Insta

llati

on

S

yste

ms

www.hilti.group


Beam clamp (A4 stainless steel) MQT-RTechnical dataMaterial composition

Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L, Nut: A4-70 - DIN EN ISO 3506-2






■ No drilling or welding neccessary■ Completely pre-assembled and suits all

standard T-beams


Item number

MQT-21-41-R M10 17 mm 10 Nm 427 g 10 pc 304067

MQT-52-82-R M10 17 mm 20 Nm 471 g 10 pc 304068

Drilled plate (A4 stainless steel) MQZ-L-RTechnical dataMaterial composition


Key applications and advantages■ For wall, ceiling or floor attachment of

angles, connectors or brackets■ For fastening metric threaded parts to

MQ channel■ Matches the MQ channel system

perfectly■ Suitable for MQ installation channels

and brackets


Item number

MQZ-L9-R 9.5 mm 90 g 20 pc 304071

MQZ-L11-R 11.5 mm 82 g 20 pc 304072

MQZ-L13-R 13.5 mm 80 g 20 pc 304073

Economical anchor rod for injection (A4 stainless steel),AM A4-70Technical dataAnchor type Metre rods

Head configuration Externally threaded

Material composition

Stainless steel A4-70

PROFIS software No

Material, corrosion Steel, stainless

Ordering designation Anchor size Base plate clearance hole Wrench size Anchor length Package contents Sales pack quantity

Item number

AM8x1000 A4-70 M8 9 mm 13 mm 1000 mm 1x Threaded stud M8X1000 stnls. 10 pc 58666AM8x2000 A4-70 M8 9 mm 13 mm 2000 mm 1x Threaded stud M8X2000 stnls. 10 pc 414778AM10x1000 A4-70 M10 12 mm 17 mm 1000 mm 1x Threaded stud M10X1000 stnls. 10 pc 58670AM10x2000 A4-70 M10 12 mm 17 mm 2000 mm 1x Threaded stud M10X2000 stnls. 10 pc 414779AM12x1000 A4-70 M12 14 mm 19 mm 1000 mm 1x Threaded stud M12X1000 stnls. 5 pc 58671AM12x3000 A4-70 M12 14 mm 19 mm 3000 mm 1x Threaded stud M12X3000 stnls. 5 pc 58709AM16x1000 A4-70 M16 18 mm 24 mm 1000 mm 1x Threaded stud M16X1000 stnls. 5 pc 58683

Insta

llati

on

S

yste

ms


432

Ordering designation Anchor size Base plate clearance hole Wrench size Anchor length Package contents Sales pack quantity

Item number

AM20x1000 A4-70 M20 22 mm 30 mm 1000 mm 1x Threaded stud M20X1000 stnls. 5 pc 58688AM24x1000 A4-70 M24 26 mm 36 mm 1000 mm 1x Threaded stud M24X1000 stnls. 5 pc 58689

Flat washer DIN 125 (A4 stainless steel)Technical dataMaterial composition

Stainless steel A4 – DIN EN ISO 7089


Item number

A 8,4/16 A4 8.4 mm 16 mm 1.6 mm 2 g 50 pc 58622

A 10,5/20 A4 10.5 mm 20 mm 2 mm 3 g 50 pc 58042

A 13/24 A4 13 mm 24 mm 2.5 mm 5 g 50 pc 58041

A 17/30 A4 17 mm 30 mm 3 mm 10 g 25 pc 387989

A 21/37 A4 21 mm 37 mm 3 mm 15 g 25 pc 387990

A 25/44 A4 25 mm 44 mm 4 mm 30 g 25 pc 387991

Hexagon nut (A4 stainless steel)Technical dataMaterial composition



Item number

M8 A4-70 M8 7 mm 13 mm 5 g 50 pc 52460

M10 A4-70 M10 8 mm 17 mm 11 g 50 pc 52461

M12 A4-70 M12 10 mm 19 mm 16 g 50 pc 52462

M16 A4-70 M16 13 mm 24 mm 31 g 25 pc 52463

M20 A4-70 M20 16 mm 30 mm 54 g 25 pc 387992

M24 A4-70 M24 19 mm 36 mm 96 g 25 pc 387993

Insta

llati

on

S

yste

ms

www.hilti.group


Hexagon bolt (A4 stainless steel)Technical dataMaterial composition

Stainless steel A4-70 - DIN EN ISO 3506-1


Item number

M8x25 A4-70 M8 25 mm 5 mm 13 mm 14 g 50 pc 87637

M10x20 A4-70 M10 20 mm 6 mm 17 mm 22 g 50 pc 26839

M10x25 A4-70 M10 25 mm 6 mm 17 mm 25 g 50 pc 87632

M12x20 A4-70 M12 20 mm 8 mm 19 mm 32 g 50 pc 387988

M12x25 A4-70 M12 25 mm 8 mm 19 mm 36 g 50 pc 87634

Spacer coupling, round (A4 stainless steel)Technical dataMaterial composition



Item number

M8x30 A4-70 round M8 30 mm 11 mm 11 g 50 pc 266885




Pipe ring (A4 stainless steel) MP-SRNITechnical dataMaterial composition

Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L


-50 - 120 °C


50° ±5° Shore A


Approvals Fire class B2, RAL-GZ 655-B


Key applications and advantages■ Heating and industry■ Food industry (except production)■ Water treatment■ Resistance-welded connection boss■ High resistance to corrosion (A4 stain-

less steel)


Clamping range - D




Maximum load - F

Clamping screw

Sales pack quantity

Item number

MP-SRNI 42 M10

38 - 44 mm 1-1/4 in 82 mm 17 x 2 mm 35 mm 1600 N M8 25 pc 374192

MP-SRNI 48/50 M10

48 - 52 mm 1-1/2 in 91 mm 17 x 2 mm 39 mm 1600 N M8 25 pc 374193

Insta

llati

on

S

yste

ms


434

Pipe ring metric (A4 stainless steel) MP-MRITechnical dataMaterial composition

Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L


-50 - 120 °C


50° ±5° Shore A




Key applications and advantages■ Heavy-duty pipe installations■ Heating and industry■ Food industry (except production)■ Solid connection boss, welded all round■ Greater stiffness from profiled pipe ring

steel band





Maximum load - F

Clamping screw

Sales pack quantity

Item number

MP-MRI 2 1/2” M10 70 - 77 mm 2-1/2 in 136 mm 24.5 x 2 mm 48 mm 3000 N M8 10 pc 372045MP-MRI 101,6 M12 97 - 103 mm 173 mm 30.5 x 2.5 mm 65 mm 4000 N M8 5 pc 372048MP-MRI 117 M12 114 - 119 mm 189 mm 30.5 x 2.5 mm 74 mm 4000 N M8 5 pc 372050MP-MRI 125 M12 122 - 127 mm 197 mm 30.5 x 2.5 mm 78 mm 4000 N M8 5 pc 372051MP-MRI 133 M12 132 - 137 mm 207 mm 30.5 x 2.5 mm 83 mm 4000 N M8 10 pc 372052MP-MRI 5” M16 137 - 142 mm 5 in 212 mm 30.5 x 2.5 mm 89 mm 4000 N M8 10 pc 372053MP-MRI 159 M16 156 - 162 mm 232 mm 30.5 x 2.5 mm 97 mm 4000 N M8 10 pc 372054MP-MRI 6” M16 162 - 168 mm 6 in 239 mm 30.5 x 2.5 mm 101 mm 4000 N M8 10 pc 372055MP-MRI 219,1 M16 217 - 224 mm 296 mm 30.5 x 3 mm 130 mm 5000 N M8 10 pc 372059

Insta

llati

on

S

yste

ms

www.hilti.group

CHANNEL INSTALLTIONSystem MI Industrial Pipe and Electrical Supports - Hot Dipped Galvanized

Insta

llati

on

S

yste

ms


436

Girder MITechnical dataMaterial composition

DD11 MOD - HN 555, S235JR - EN 10025


Key applications and advantages■ Provides easy-to-install, adjustable,

flexible solution for industrial and heavy commercial applications, eliminating the need for welding

■ Modular system for secondary steel structures such as pipe supports, cable tray supports and platforms

■ Fast and efficient installation■ Hot-dip galvanized, no need to paint

Ordering designation Height Length Weight per metre length Sales pack quantity

Item number

MI-90 6m 90 mm 6 m 9430 g 6 m 304799

MI-120 6m 120 mm 6 m 12600 g 6 m 304801

Connector MIC-UTechnical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461


No cantilever possible, Always support on both sides.

Key applications and advantages■ Modular four-part system for supporting

cable trays, pipes and miscellaneous secondary steel

■ Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications, elimi-nating the need for welding

■ Strong and rigid connection■ Can be finely adjusted by up to 5 mm

Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack quantity

Item number

MIC-90-U 90 Yes 2.51 kg 19 mm 84 Nm 4 pc 304803

MIC-120-U 120 Yes 2.79 kg 19 mm 84 Nm 4 pc 304804

Connector MIC-LTechnical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; backing plate, toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; backing plate, toothed plate, bolt, nut 45 µm - DIN EN ISO 1461




■ Cantilever connections■ Strong and rigid connection■ Can be finely adjusted by up to 5 mm

Insta

llati

on

S

yste

ms

www.hilti.group


Ordering designation MI girder type Set Weight Wrench size Tightening torque Sales pack quantity

Item number

MIC-90-L 90 Yes 4.05 kg 19 mm 84 Nm 2 pc 304805

Connector MIC-TTechnical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461


Use in pairs

Key applications and advantages■ Supporting cable trays, pipes and

miscellaneous secondary steel (MIC-T forms a safe, four-part system)

■ Industrial and heavy commercial appli-cations requiring an easy-to-install, ad-justable, flexible solution that eliminates the need for welding

■ Positive engagement for optimum transmission of forces and moments

■ Vibration-resistant screw fastenings thanks to self-locking nuts

Ordering designation MI girder type Weight Wrench size Tightening torque Sales pack quantity

Item number

MIC-T 90, 120 2.2 kg 19 mm 84 Nm 2 pc 304807

Connector MIC-ETechnical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461

Key applications and advantages■ Connecting MI girders■ Fast and efficient installation■ Positive locking hold for optimum trans-

mission of forces and moments


Item number

MIC-90-E 90 3.69 kg 19 mm 84 Nm 2 pc 304809

MIC-120-E 120 4.49 kg 19 mm 84 Nm 2 pc 304810

Insta

llati

on

S

yste

ms


438

Connector (steel) MIC-STechnical dataMaterial composition





■ Provides easy-to-install, adjustable, flexible solutions for industrial and heavy commercial applications

■ Fastening to standard steel beams without drilling or welding

■ Provides a strong and rigid connection■ Base plates are designed to cover a

large range of standard flange widths

Ordering designation MI girder type

Steel beam width

Weight Width - B X Y Tightening torque Sales pack quantity

Item number

MIC-S90-AA steel 90 75 - 165 mm

4.37 kg 100 mm 100 mm 170 mm 84 Nm 2 pc 304811

MIC-S90-A steel 90 75 - 165 mm

7.14 kg 280 mm 200 mm 140 mm 84 Nm 2 pc 304812

MIC-S90-C steel 90 235 - 300 mm

10.7 kg 430 mm 350 mm 290 mm 84 Nm 2 pc 304814

MIC-S120-A steel 120 75 - 165 mm

7.89 kg 280 mm 200 mm 140 mm 84 Nm 2 pc 304818

MIC-S120-B steel 120 165 - 235 mm

8.99 kg 350 mm 300 mm 210 mm 84 Nm 2 pc 304819

MIC-S120-C steel 120 235 - 300 mm

10.65 kg 430 mm 350 mm 290 mm 84 Nm 2 pc 304820

Connector (concrete) MIC-C-AA/-DTechnical dataMaterial composition






■ Easy installation of MI girders between two walls

■ Concrete connector base plates can be fastened using a variety of Hilti anchors

■ No welding, no downtime


Item number

MIC-C90-AA concrete 90 3.49 kg 19 mm 84 Nm 2 pc 304825

MIC-C90-D concrete 90 7.84 kg 19 mm 84 Nm 2 pc 304827

MIC-C120-D concrete 120 7.96 kg 19 mm 84 Nm 2 pc 304829

Insta

llati

on

S

yste

ms

www.hilti.group


Connector (concrete) MIC-C-UTechnical dataMaterial composition




No cantilever possible, Always support on both sides.

Key applications and advantages■ Installation of MI girders between two

walls■ Fastening to concrete walls, floors or

ceilings■ Light-duty version for non-cantilever

structures with support on both sides■ Oblong holes simplify exact positioning


Item number

MIC-C90-U concrete 90 2.45 kg 19 mm 84 Nm 2 pc 304826

Connector MIC-U-MATechnical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; toothed plate, bolt, nut 45 µm - DIN EN ISO 1461


To be used in pairs

Key applications and advantages■ For supports or corner struts at angles

between 0° and 180°■ Vibration-resistant screw fastenings

thanks to self-locking nuts■ Can be finely adjusted by up to 5 mm


Item number

MIC-U-MA 90, 120 2.63 kg 19 mm 84 Nm 2 pc 304806

Connector MIC-CU-MATechnical dataMaterial composition



Key applications and advantages■ Connecting girders directly to concrete

at angles between 0° and 180°■ Fastening to concrete/walls■ Oblong holes simplify exact positioning


Item number

MIC-CU-MA concrete 90, 120 2.21 kg 19 mm 84 Nm 4 pc 304828

Insta

llati

on

S

yste

ms


440

U-bolt connector MIC-UBTechnical dataMaterial composition

Connector, square washer: DD11 MOD - HN 547, S235JR - DIN EN 10025; washer: DIN EN ISO 7089; bolt: 8.8 grade steel; nut: 8 grade steel

Surface finish HDG: connector, square washer 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461

Key applications and advantages■ Reliable fastening with U-bolts (not

included)■ Reliable fastening system for use with

U-bolts■ Long slots for precise adjustment of

pipe position

Ordering designation MI girder type Weight Wrench size Sales pack quantity

Item number

MIC-UB90-M16 90 1.28 kg 19 mm 6 pc 304834

MIC-UB90-M12 90 1.27 kg 19 mm 10 pc 304831

MIC-UB120-M12 120 1.38 kg 19 mm 10 pc 304833

U-bolt MI-UBTechnical dataMaterial composition

U-bolt: DD11 MOD - HN 547, S235JR - DIN EN 10025; nut: 8 grade steel; washer: DIN EN ISO 7093-1-200HV

Surface finish HDG: 45 µm - DIN EN ISO 1461

Key applications and advantages■ Provides easy-to-install, adjustable,

flexible solutions for industrial and heavy commercial applications, elimi-nating the need for welding

■ Small contact surface between U-bolt and pipe

■ Minimizes crevice corrosion


Nominal pipe size Thread - M Weight Thread length - L Height - H Width - B Sales pack quantity

Item number

MI-UB 25-M10 25 mm M10 oversized 0.17 kg 50 mm 76 mm 48 mm 20 pc 431587










Insta

llati

on

S

yste

ms

www.hilti.group


Easy hand screw MIA-EHTechnical dataMaterial composition

Bolt: 8.8 grade steel; toothed plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562


Key applications and advantages■ Parts designed for easy assembly

(shaped to prevent rotation)■ Integrated toothed plate allows easy

one-handed adjustment

Ordering designation MI girder type Length - L Weight Tightening torque Sales pack quantity

Item number

MIA-EH90 90 120 mm 0.18 kg 84 Nm 10 pc 304887

MIA-EH120 120 150 mm 0.21 kg 84 Nm 10 pc 304888

One-hand screw MIA-OHTechnical dataMaterial composition

Steel grade 8.8


Key applications and advantages■ Parts designed for easy assembly

(shaped to prevent rotation)

Ordering designation MI girder type Length - L Weight Tightening torque Sales pack quantity

Item number

MIA-OH90 90 95 mm 0.1 kg 84 Nm 10 pc 304889

MIA-OH120 120 127 mm 0.13 kg 84 Nm 10 pc 304890

Backing plate MIA-EH-PTechnical dataMaterial composition

Plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562; spring: 1.4319 AISI 302, 1.431 DIN EN 10088


Key applications and advantages■ Provides an easy-to-install, reliable

solution for the chemical, pharmaceu-tical and petrochemical industries or in incineration plants and power stations

■ Single-handed installation thanks to integrated anti-rotation device

■ Hand plate for single-handed adjust-ment of the connection

Ordering designation MI girder type Weight Sales pack quantity

Item number

MIA-EH-P 90, 120 0.29 kg 10 pc 304891

Insta

llati

on

S

yste

ms


442

Toothed plate MIA-TPTechnical dataMaterial composition

EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-7 - DIN EN 1562


Key applications and advantages■ “Easy hand” toothed plate for easy

single-handed adjustment of the connection


Item number

MIA-TP 90, 120 0.06 kg 20 pc 305707

Prevailing torque hex nut M12-F-SL-WS 3/4”Technical dataMaterial composition

Steel grade 8


Key applications and advantages■ Self-locking function through the thread

insert

Ordering designation Weight Tightening torque Sales pack quantity

Item number

M12-F-SL-WS 3/4” 0.02 kg 84 Nm 100 pc 382897

Girder end cap MIA-ECTechnical dataMaterial composition

Moplen EP 240H


-30 - 90 °C


These products are complementary to Hilti channels and sale is possible only together with channels in the ratio of two end caps to one channel For detailed lead time infor-mation please contact your Hilti representative

Key applications and advantages■ For closing the ends of girders■ With built-in opening to permit drainage

of liquids


Item number

MIA-EC90 90 0.02 kg 25 pc 432077

90.4

90.4

17

MIA-EC120 120 0.03 kg 25 pc 432078

90.4

120.4

17

Insta

llati

on

S

yste

ms

www.hilti.group


Beam clamp MI-SGCTechnical dataAdditional product information

Use in pairsKey applications and advantages■ MI beam clamp for direct connection of

MI girder to steel beam■ For steel beams with flange thicknesses

from 3 to 36 mm and angles of up to 15°

■ Corrosion protection on the steel beam is not damaged by the beam clamp

Ordering designation Thread - M Weight Width - B Wrench size Tightening torque Sales pack quantity

Item number

MI-SGC M12 M12 0.36 kg 30 mm 19 mm 84 Nm 16 pc 233859

Beam clamp MI-DGCTechnical dataMaterial composition

Clamp: EN-GJMB-350-10 - DIN EN 1562, EN-GJMW-400-5 - DIN EN 1562, EN-GJMW-450-6 - DIN EN 1562; U-bolt: Steel grade 8.8; Nut: Steel grade 8

Surface finish HDG: Clamp 55 µm - DIN EN ISO 1461; U-bolt, Nut 45 µm - DIN EN ISO 1461



Key applications and advantages■ MI beam clamp for direct connection of

MI girder to steel beam■ For steel beams with flange thicknesses

from 3 to 36 mm and angles of up to 15°

■ Corrosion protection on the steel beam is not damaged by the beam clamp

Ordering designation MI girder type Weight Tightening torque Sales pack quantity

Item number

MI-DGC 90 90 1.02 kg 84 Nm 4 pc 233860

MI-DGC 120 120 1.04 kg 84 Nm 4 pc 233861

MI/MQ cross connector MIC-MI/MQ-XTechnical dataMaterial composition



Key applications and advantages■ Direct connection of MQ installation

channels to the MI system■ Keyed hold for optimum transmission of

forces and moments■ Forces and moments are transmitted

reliably through positive engagement


Item number

MIC-MI/MQ-X 90, 120 0.36 kg 50 Nm 16 pc 304881

Insta

llati

on

S

yste

ms


444

Connector MIC-MI/MQ M8Technical dataMaterial composition

Connector: DD11 MOD - HN 547, S235JR - DIN EN 10025; bolt: 8.8 grade steel

Surface finish HDG: connector 55 µm - DIN EN ISO 1461; bolt 45 µm - DIN EN ISO 1461

Key applications and advantages■ Direct connection of MQ installation

channels to the MI system■ Forces and moments are transmitted

reliably through positive engagement■ Keyed hold for optimum transmission of

forces and moments


Item number

MIC-MI/MQ-M8 90, 120 0.06 kg 20 Nm 5 pc 304882

Elevator part MICTechnical dataSurface finish HDG: 55 µm - DIN EN

ISO 1461

Key applications and advantages■ Horizontal divider beam in elevator

shafts■ Fastening the guide rails■ Easy installation between two walls■ Oblong holes simplify exact positioning


Item number

MIC-U-EL 90 0.97 kg 8 pc 431681

MIC-U-EF 90, 120 0.22 kg 8 pc 431682

MIC-90-U-ED 90 2.98 kg 2 pc 431680

Insta

llati

on

S

yste

ms

www.hilti.group

VENTILATION SYSTEMS

Insta

llati

on

S

yste

ms


446

Perforated band hanger MV-SITechnical dataMaterial composition

DD11 steel - DIN EN 10111, EPDM



-40 - 110 °C


60° ±5° Shore A


Key applications and advantages■ For the installation of round air ducts to

the ceiling■ Easy to use■ Fits all folded spiral-seam tube sizes

Ordering designation Maximum load - F Maximum tensile load - Fz Weight Sales pack quantity

Item number

MV-SI 600 N 0.6 kN 30 g 50 pc 386530

Perforated band LBTechnical dataMaterial composition

DX51D+Z275-N-A - DIN EN 10346


Key applications and advantages■ For fastening pipes to ceilings

■ Easy and fast installation possible


Width - B Hole diameter - D Distance be-tween holes - A

X Cross section thickness - s

Length - L Maximum tensile load - F

Sales pack quantity

Item number

LB 12 12 mm 5.1 mm 14 mm 7 mm 0.9 mm 10000 mm 0.75 kN 10 pc 57711

LB 17 17 mm 7 mm 20 mm 10 mm 1 mm 10000 mm 1.2 kN 10 pc 57712

LB 26 26 mm 8.2 mm 26 mm 17.2 mm

1.2 mm 10000 mm 2.2 kN 10 pc 57713

Air duct bracket MVA-LC/-LPTechnical dataMaterial composition




-40 - 110 °C


40° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected

Key applications and advantages■ For the installation of rectangular air

ducts to ceilings■ Convenient solution for fastening

ventilation ducts directly to ceilings, suspended on threaded rods or in conjunction with MQ system for rising ducts

■ Scale for precise alignment and stand-off installation

Ordering designation Maximum load - F Thread - M Weight Sales pack quantity

Item number

MVA-LC 60 600 N M8, M10 90 g 25 pc 386533

Insta

llati

on

S

yste

ms

www.hilti.group


Air duct bracket MVA-ZCTechnical dataMaterial composition




-40 - 110 °C


40° ±5° Shore A


Key applications and advantages■ For the installation of rectangular air

ducts to ceilings■ Quick through-fastening for M8/M10

threaded rods■ Movable cage allows compensation of

dimensional tolerances in the struc-ture and avoidance of rebars during installation


Item number

MVA-ZC 600 N M8, M10 132 g 25 pc 386531

Heavy air duct bracket MVA-LHTechnical dataMaterial composition

DD11 - DIN EN 10111



-40 - 110 °C


60° ±5° Shore A


Approvals Acustic insulaton DIN 4109 inspected


Key applications and advantages■ For rectangular air ducts in vertical

shafts■ Perfect for heavy loads■ Convenient solution for bridging the

thickness of the insulation (up to 30 mm)


Item number

MVA-LH 800 N M8, M10 290 g 25 pc 2047749

Documents

INSTALLATION SYSTEMS - Madavimadavi.ir/img/products/catalouge/General Catalogue 2018...Installation Systems Installation Systems 344 Installation channel MM-C-16 Technical data Material