.

INSTALLATION NOTE

^ •After the USB driver installation has been completed^ (Step 1), connect the cloning cable to the PC (Step 2).^•The displayed dialog boxes, indications or operations% may differ slightly from the following instructions, de-^ pending on your system settings, type of OS and its ser-^ vice pack level.

CD USB driver installation (Step 1)

1 When installing on other than a Windows 98SE or Me PC,% log on as the administrator.

© Make sure Windows has completed it's start-up, and noother applications are running.

(D Insert the supplied CD into the CD drive.

(D Double click "ICOM USB Driverlnstaller.exe" contained inthe 'XP_2K_98SE_ME' folder on the CD icon.

© "Welcome to the InstallShield Wizard for Icom USB-to-Serial" appears.Click [Next >].

© "License Agreement" appears.Read all of the license agreement, and then click [Yes] tocontinue, if you agree.

Click

InstallShield Wizard

License Acreeaeirl

Press the PACEWW key I o see I he rot of Ihe tireeeent.

End User License Atreeaent ('ELLA") *.

5o not install or use the soflrare until you have read and acceptedII of the license tern. Permission to use the sof leans It

conditional upon your atreelnt to the license terns. Installation orof the softtare by you nl 11 be deeaed to be acceptance of themse terns. Acceptance .III bind you to the license term In a

lestlly enforceable contract »llh Prolific Technolocy Inc.

• SCRIARE LICENSE AMD LIMITED lAJWAJfTY -v

Do you accept all the tents of the precedinr License Acreeaent? If youchoose Ko. the seta? Till close. To Install ICOa US8-to-Serlal. you euslaccept this e*ree=er.t.

Yes

££• These Instructions are based on using Windows XP.^ However, the instructions are similar to another operat-% ing systems, such as Windows 98SE, Me and 2000.

^» Please refer to the installation guide on the CD for in-w, stalling Windows Vista or Windows 7.% To read the installation guide, Adobe® Reader® is re-% quired. Ifyou have not installed the reader, please down-% load it from Adobe Systems Incorporated's website.

© "Software Installation" appears.Click "Continue Anyway" to start the USB driver installation.

t\ The «crtv«ejioue>ei^B»no^r«t patted Wr«Jowi LocoLK.\ l»il*iglnv.iJy««c<v«pati^**Windo»«t><P. fTelmewhv

tmSafBttMhalmO

Conlmumg youi inilollelion ol this lollwjrc stay «•«"«m deslabifao Ihe collect opetebon of yout sytteneithei ieaaedwlety 01 in the hfiae. Miaosoft strong);leconoendt thai you slop this mtlalWron now andcontact the solhvate venooi loi eofhtate thai haspassed Windowa Looo letting.

Click>w 1 rir-—'t^—1 STOPIr»lot*«n j

(7) After the installation has completed, "InstallShield WizardComplete" appears.Click [Finish].

^-•w^fll ImtsltShiold Wizard

HIInelallShield lizard Coas>lete

InstallShield already successfully to InstalledICOM CLOWINC CAOE driver. Please press [Finish]button to close end out of InstallShield.

If you have been plucsed cable on PC before runthis setup, please unplus and then plus cableataln for systte delect this device!

Click Finish Cancel I—*H

(D Restart the PC.

Icom, Icom Inc. and the Icom logo are registered trademarks ofIcom Incorporated (Japan) in Japan, the United States, the UnitedKingdom, Germany, France, Spain, Russia and/or other countries.Adobe and Reader are registered trademarks of Adobe SystemsIncorporated in the United States and/or other countries.Microsoft, Windows and Windows Vista are registered trademarks

of Microsoft Corporation in the United States and/or other countries.All other products or brands are registered trademarks or trademarks of their respective holders.

2] Cable connection (Step 2)After completing Step 1, connect the cloning cable to the PC tocomplete the installation.

© Connect the cloning cable to the USB cable, and thenthe USB cable to the PC's USB port, as illustrated below.• Attach the Ferrite EMI filter to the PC side of the USB cable.

to the USB port

USB cable

Cloning cable

(D This dialog box appears on the desktop.

~\i) Found New Hardware lj*J

USB-Serial Controller

®<8>UH

(D "Welcome to the Found New Hardware Wizard" appears.Select "No, not this time,"and then click [Next>].

© Select "Install from a list or specific location (Advanced);and then click [Next>].

Cfck Ned lo corttTK

0 Click Next>

Select "Don't search. I will choose the driver to install,and then click [Next>].

O Select

0 Click

Please choose your search and imtsfiation option*.

(J Sllii lor15 b«tdrivsr n these EcSCS

. '3ew;Vff<Kr/at<teiftro»rfc^y.tD-fiOH. J

lostjfcfttttoapninfcuBwrh

. [©Donisearch lichee* the dryer to instaJ jLhoote UK cpocn to itec <neowce orr/ei item a ui Wndowt does not guarantee lhatthe divaryouchoose wi be thebeatmatchforyou hardware.

^* Next> c«i

© Select "Icom USB-to-Serial Comm. Port" and then click[Next>].

mammSe*«c( Ihe device driver you w*nt Id aula* for Ihii hardware.

O Select •**

i <fefc that centers rha cover you Mart to "rotat cfckHaveDbfc.

0 Showcoiroalitre hardware

^ ThJt «M ••not«gJUIr"Bbw*

0 Click Next>

(Z) "Hardware Installation" appears.Click"Continue Anyway."

i\

Click

The softwareyou rte rstaEng foefrsr hatUars:

Icon USB-to-Seaa! Coram Port

hat notpassed Wrdow? Logot*»6ngto verly itscorrpabbitywihWndomXP. fTtf r* wt*ttat«trx3rtrrot<r<.i

Continuing your installation ol this sol Iware may iapairof desUbikze the correct operation or your ryttcraeither iwtediaiery ot in the future. Microsoft stronglyre cor— ends th«t you ttop this installation nor* andcontact the hardware vendor lor software that has

passed Windowi Logo testing.

"^I 1Continue^ryway ] j STCPtratgEs^ |

® After the installation has completed, "Completing theFound New Hardware Wizard" appears. Click [Finish].

Oci Fran to dote the wuasd

Click • >». Finish

1 Restart the PC.

-

GD COM port confirmation (Step 3)Afterthe driver installation has completed, confirm the driveravailability and the port number.The COM port number is used to set communication withthe cloning software.

© Click the Windows "start" button.

© Right click [My Computer] in the <start> menu, and thenclick [Properties], as shown below.

• "System Properties" appears.

© Click the [Hardware] tab, and then click [Device Manager].

• "Device Manager" appears.

O Click

0 Click

l^~. I«~

System Properties

SystemRestore j Autop^r"--'-— ^55 • Saiss,.»j> fi H«dwtto

DeviceManege

TheDeviceManagerfcj al thehardwaredevicej rotaledon you conputer. Use the Device Manager lo change thepropertiesof any device.

•H [Manager

Drives Signrrg led you make sure thai inttaied driversaiecompetUe withWindows.WindowsUpdate let*you set upho* Windows connects loWhdows Update fordwell.

Dfivec Signing Windows Update

HaidwatePioSes

Hardwareprofilesprovidea wayforyou to set up and storedifferenthardware configurations.

Apt*

© Click the" a" next to "Ports (COM&LPT)."Confirm "Icom USB-to-Serial Comm. Port (COM*)" is displayed.• In this example, the COM port number is "5."

O Click

0 Confirm

•^ Device Manager BSii£ile Action View (Help

«=»•*• GE3

[fi-TJft Mice andother pointing devices <sBfe* ModemsS-§ Monitors0- *3> Network adapters

frj PCMCIA adapters"(JDj? Ports (COM &LPT)

V~3r Communications Port (COM1)L_ <? prp PrirJ-cf Pn^ (IPTH

»-[-^ Icom U58-to-5erial Comm. Port (COM5) [a-%p rrm.oxjii

B $4 Sound, video andgame controlersB--3 System devicesH <^* Universal Serial Bus controlers

^•lf the COM port number is not displayed, or several^ numbers are displayed at the same time like "Icom% USB-to-Serial Comm. Port (COM*)(COM*)." the driver% may not be installed properly. In such case, uninstall thevfo USB driver and install it again.*%> • You can uninstall the program using the "Add or RemoveY/ Programs" in the Windows Control Panel.

Count on us!