2

3

1

4 x

4 x

© 2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.

Compatible with these Alpine double DIN devices

Alpine Navigation

Double DIN Kit contents:

• (1) Facia Plate• (2) Metal Brackets • (3) Fixing Screws

Installation Manual Double DIN Kit APF-F291320VW

• VW CC (Type 3CC)• VW Eos (Type 1F)• VW Golf V/IV• VW Jetta V/VI

• VW Tiguan (Type 5N)• VW Touran (Type 1T/GP/GP2• VW T5 facelift

• VW Sharan II (Type 7N)• VW Caddy (Type 2K) • VW Scirocco III (Type 13)• VW Beetle (Type 16) • VW Polo (Type 6R)• VW Amarok (Type 2H) • VW Passat (Type 3C/CC)

Installation Manual Double DIN Kit APF-F291320-10 VW

VW Golf V only

VW Golf V only:

Pull up the aircone unit (fixed by clips). Remove two Torx (TX20) screws (see arrows) which become visible.

1. Remove the original trimframe, surrounding the radio(fixed by clips).

2. Remove the 4 Torx (TX20) screws(These screws will be used againlater).

Remove the OEM head unit.

4. Mount both metal brackets at thefacia plate as shown in the samplepicture on the left.

5. Push the Double DIN head unitinto the facia plate and fix the si-des of the head unit with 2 screwson each side.

6. Connect all wires and fix theDouble DIN head unit with theoriginal Torx (TX20) screws.

7. Reinstall everything in reverseorder to finish installation.

All installation work must be performed by a qualified professional installer only.The manufacturer / dealer is not liable for any kind of incidential or indirect damages.