Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0cWe reserve the right to make changes without prior notice
Installation manual
BB LEDlightpipe EVO
BB-Lightconcepts a division of TKH Parking Solutions B.V.Fabriekstraat 16-047005 AR Doetinchem (Netherlands)www.bb-lightconcepts.eu
We reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO ve rsion 3.0c
Page
1 2 3 3 3 4 4 5 6 7 8 910111213
Table of contents:
1.Introduction 2.BB LEDlightpipe EVO components and modules 3.Light-tubes 4.LED unit 5.LED driver module 6.BB LEDlightpipe type's 7.Producttable 8.Bracket types 9.Infeed BB LEDlightpipes10.Connecting BB LEDlightpipe lines11.Connecting "split in two parts" BB LEDlightpipes12.Stand alone luminairs: BB LEDlightpipe ECO, 4 t ypes13.BB LEDlightpipe ECO with integrated Emergency l ight14.BB LEDlightpipe ECO, integrated PIR sensor15.Parkguidance16.Integrated certified evacuation / broadcasting s ystem
We reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0c
BB Lightconcepts.euTa -40/+50 _C IP 66
Input: 120-277 V~ 50/60 Hz
Type: EVO BEB.. - ..
Product label
Certificates:
IEC 60598-1 (ed.7), IEC 60598-2-1 (ed.1 );am1, IEC 62031(ed.1)
EN 55015:2006 +A1:2007, +A2:2009 EN 61000-3-2:2006 +A1:2009, +A2:2009 EN 61000-3-3:2008 EN 61547:2009 EN 61000-4-2:2009 EN 61000-4-3:2006 +A1:2008, +A2:2010 EN 61000-4-4:2012 EN 61000-4-5:2006 EN 61000-4-6:2009 EN 61000-4-8:2010 EN 61000-4-11:2004
Emission for lighting equipmentHarmonic current emmisionsLimitation of voltage fluctuationsProduct group immunity standard lighting equipmentElectrostatic discharge (ESD) immunity RadiatedElectro-Magnetic field immunityElectrical fast transient (EFT) immunitySurge transient immunityConducted Radio-Frequency disturbances immunityPower frequency magnetic field immunityImmunity to voltage dips and short interrupts
Page 1
1.Introduction
Input voltage Frequency Rated Power
Dimming signal Shock resistance Insulation class Dust/waterresistance
LED type LED circuits LED protection
Ambient temperature Color temperature All wires LSZH
Luminous flux
Vac HzWatt
---- ----
------
ºCK
Lumen
120-277(UL version) or 220-240 (EU version)50/6040, 81 or 162
DALIIK 10+class I IP 66
NICHIA, high power ceramicNO parallel circuitsNTC on LED boards
-40ºC/ +50ºC5000 (standard) 2700 K --- 6500 K(low smoke zero halogen)
3275 for luminairs with 1 LEDunit 6550 for luminairs with 2 LEDunits13100 for luminairs with 4 LEDunits
The BB LEDlightpipe is a modular build luminaire concept. A standarized LED unit beams the light into a polycarbonat tube.Optical foils are mounted inside the tube to transport and extract the light over the length of the tube.An absolute glare free lightdistribution is achieved.Due to this modularity a great number of different luminaires, lengths from 2,3 meters up to 12 meters and luminousoutput up to 13.000 Lumens, are available.All luminairs are standard DALI controlled, other options 1-10V or Dynadim are also available.The color temperature is 5000 Kelvin, if not specified differently. Colors from minimum 2700 K to maximal 6500 K can be ordered as well.
All luminaires can be used in a line setup or as stand alone luminaire and contain plug and play connectors.The ECO is especially designed for the retrofit market.BB LEDlightpipes in a line setup can be extended with a fully integrated Park guidance and sound or evacuation system.
E box
Lighttube
Tube stop
Output connector
Mounting bracket
Bracket is moveable
Pop rivet
LED driver
Internal wires
Input connector LED Unit
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0cWe reserve the right to make changes without prior notice.
Page 2
2.BB LEDlightpipe EVO components and modules
The BB LEDlightpipe EVO is a modular lighting sytem, suitable for continuous light lines or stand alone luminairs.The luminairs for the light lines are equipped with a plug&play connector system for a fast and secure installation.The luminairs for stand alone are equipped with standard terminal blocks.All BB LEDlightpipes EVO can be wired through to the other end, so-called wired versions.The last BB LEDlightpipe in a line does not contain wires, so-called end versions.The lighttube comes with two different lengths, L1 and L2 and can contain either one (mono) or two (bi)LEDunits.
Lighttube mono
Lighttube bi
Input connector 770-1105
wired version ( standard 1 Phase )
Internal wires
1 phase is standard 3 phase on request
LED driver 150 W to control 4 LED units LED driver 75 W to control 2 LED units LED driver 40 W to control 1 LED unit
Replaceable LED pcboardLumenmaintenance LED (IEC PAS 62717)L90F50=200.000 h meaning:after 200.000h:50% of the LEDs produce 90% of the initial luminous flux
c 2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0We reserve the right to make changes without prior notice.
LEDunit containing,
- up to 18 NICHIA ceramic power LED's- a NTC resistor for thermal protection- all mounted on a metall core pcb- rigid aluminum heat sink to conduct the heat to the aluminum profiles- a lens to beam the light into the tube- a rigid seal (no rubber) to seal the tube IP66- a device to aerate the tub
end version (no internal wires)
3.Light-tubes4.LED unit
Page 3
5.LED driver module
The lighttube is available in 2 different standard lengths and 2 versions, mono and bi.All lighttubes are IP66.
Features LEDdrivers:
- Programmable- DALI dimmable, constant current, NO puls width modulation- Life @ TC 70°C is 100.000 hr- Maximum number on MCB-B 16A, 9 pcs for 150W, 10 pcs for 75W and 31 pcs for 40W this number can be increased by using an inrush current limiter for example http://www.camtec-powersupplies.com/inrushcurrentprotection_esb.html NOT included in delivery- IP66- Ambient temperature -40°C to +55°C- Thermal protection
Wired/End
9
10
11
500 2500 2500 500
700 7002600
Nr. Productnumber L (m) L (ft) Power (W) W (Kg) W (pound) Comment
1 ECO see page 9, 10,11 1.55 4,921' 40,5 7 15,4 standard 1 fase internal w ires
2 EB2,2-1W or EB2,2-1E 2.2 7,218' 40,5 9 19,8 w ired or end
3 EB2,2-2W or EB2,2-2E 2.2 7,218' 81 10 22 w ired or end
4 EB3,2-1W or EB3,2-1E 3.2 10,499' 40,5 12 25,5 w ired or end
5 EB3,2-2W or EB3,2-2E 3.2 10,499' 81 11 24,3 w ired or end
6 EB4-2W or EB4-2E 4 13,123' 81 13 28,7 w ired or end
7 EB4-4W or EB4-4E 4 13,123' 162 15 33,1 w ired or end
8 EB6-2W or EB6-2E 6 19,685' 81 14 30,8 w ired or end
9 EB6-4W or EB6-4E 6 19,685' 162 16 35,3 w ired or end
10 EB8-4W or EB8-4E 8 26,247' 162 26 57,3 consists of 2 Parts (A and B)
11 EB12-4W or EB12-4E 12 39,37' 162 28 61,7 consists of 2 Parts (A and B)
Length
c 2015 BB-Lightconcepts manual BB LEDlightpipe EVO ve rsion 3.0We reserve the right to make changes without prior notice.
1
2
3
4
5
6
7
8
EB = EVO B series
4 = 4 ledunits
PIR = motion sensor
EL = Emergency light
3K = 3000K, 5000K if not specified
CM = Custom length 11,6 mtrCB = Channel bracket, SB standard bracket if not specified
1-10V, DALI if not specified
3PH = 3 phase internal wires, 1 Phase if not specified
EB12 - 4 W - 3K - PIR - 3PH - CB - CM11,6 - 1-10V - EL
Option codesProduct Nr.
12 = length of the luminaire in meters
W = Wired E = End (with or without internal wires)
Length Weigth
Page 4
6.LEDLightpipe type's 7.Product table
mounting bracketsee page 5
112
4,429"114
4,505"
Metall plug (FDN 6-45 Fisher)
148
5,827"
130
5,118"
M8
30
1,181"
150
5,906"
25
0,984"
135
5,322"
153
6,018"
Cable channel nr.5216
130
5,115"
157
6,167"
60
2,362"
cWe reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0
Exchange bracket EB nr.4421Standard Bracket SB nr.2977 Rigid bracket RB nr. 3684
Channel bracket CB nr.4219 45_ bracket DB nr.3512
All standard brackets are made of stainless steel 1.4301 (AISI304).Other materials are available on request.Special brackets or suspensions can be developed in co-operationwith the engineering department.
8.Bracket types
Page 5
Connected
optional AC/DC converterfor Park Assist L4 module
Top infeed
Front infeed
optional cable
Infeed set nr.5025
Infeed line (optional) Cover line nr.5247
Cover nr.5248 Disc set nr.5257
Wago 770-1115 N, GND, L, DA, DA
Wago 770-215 N, GND, L1, L2, L3
Wago 890-1102 DA, DA
optional 3 phase setup
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0cWe reserve the right to make changes without prior notice.
Connected
Page 6
9.Infeed BB LEDlightpipes
Infeed luminaire (delivered with luminaire)
EB..-.W EB..-.W/E
output connectors input connectors (power dali + led)
connector configurations
moveunscrew the bolts
slide
LEDlightpipe fixed5 mm play
0,197"
Phase selection
Connect the LIVE wire (black) from the LED driver to L1, L2 or L3.Standard connected to L1.dali
dali
L3L2L1gndN
770-1115 770-215770-1105 770-205
890-1112890-1102
All connectors are WAGO winsta series.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0We reserve the right to make changes without prior notice.
c Page 7
10.Connecting BB LEDlightpipe lines
The BB LEDlightpipe contains internal wires for making continuous lightlines with one infeed point. The standard setup is single phase and DALI.A three phase plus DALI internal wiring is an option. The phase selection for the individual luminaire can be done on the wago connector sinceit has two contacts per pole.
dalidaliLgndN
1 Phase setup 3 Phase setup
Connected situation
Part A Part B
output connectorsPart A
input connectors (power dali + led circuit)Part B
dalidaliLgndN
L3L2L1gndN
LEDcircuit +LEDcircuit -
LEDcircuit +LEDcircuit -
dalidali
1 Phase setup 3 Phase setup
connector configurations
770-205
All connectors are WAGO winsta series.
unscrew the bolts
Part B
slide
Part A fixed
move
Optional powersupply forPark Assist L4 module
5 mm play0,197"
Part A Part B
890-1112
890-242 890-252
890-1102
770-215770-1115
770-1105
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0We reserve the right to make changes without prior notice.
c
Connected situation
The EB8 and EB12 are too long for one piece and for that reason consist of two separate parts to be connected in the mounting process.The LEDdriver is suited in the first part A. Part B contains the optional powersupply for the parkguidance.There are two possible connector configurations, a 1 phase + DALI and a 3 phase + DALI setup. A connector in the middle completes the LEDcircuit.
11.Connecting "split in two parts" BB LEDlightpipes
Page 8
155361,142"
155361,142"
180971,22"
motion sensorEmergency light
PECO-Sensor-ELPIR sensorEL
1335,217"
1244,878"
180971,22"
ECO-ELemergency light
c 2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0We reserve the right to make changes without prior notice.
Front view P
12. Stand alone luminairs: BB LEDlightpipe ECO, 4 types
ECOECO- DALI
ECO-SensorPIR sensor
Page 9
A lot of existing installations contain stand alone fluorescent luminairs.The BB LEDlightpipe is suiteable to update these installations without the needto modify the existing cabling lay-out. A build in adjustable motion sensor even enlarges the energy saving potential.The build in emergency light has abattery inside and a LED indicator outside to show its status.
Glands not includedin delivery.(all ECO models)
End connectorWago 294-4013(all ECO models)
Internal wires, N,L and GND, section 1,5 mm²(all ECO models)
Light distribution Famostar CELO
For connecting loosen the screws and take off the covers. (all ECO models)
mountbrackets not included in delivery.(all ECO models)
End connectorWago 294-4013(all ECO models)
We reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0c
LED Emergency lighttype: Famostar CELO CT8 VA-1 Ctotal flux 100 Lumentotal connected power 1W
13.BB LEDlightpipe ECO with integrated emergency light, ECO EL
Page 10
90 °
155061,024"
Detection angle Settings:
10
Cover with integratedmotion sensor
A
A
Detail A
87654321
Dipswitches
c 2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0We reserve the right to make changes without prior notice.
DIM level Time on
View A
14.BB LEDlightpipe ECO, integrated PIR sensor, ECO-Sensor
Page 11
1 2 3 4 5 6 7 8
0 0 0 0 100%0 0 0 1 10%0 0 1 0 20%0 1 0 0 40%1 0 0 0 70%
0 0 0 1 30 Sec0 0 1 0 60 Sec0 0 1 1 90 Sec0 1 0 0 120 Sec0 1 0 1 150 Sec0 1 1 0 180 Sec0 1 1 1 210 Sec1 0 0 0 240 Sec1 0 0 1 270 Sec1 0 1 0 300 Sec1 0 1 1 330 Sec1 1 0 0 360 Sec1 1 0 1 390 Sec1 1 1 0 420 Sec1 1 1 1 450 Sec
Top View
The Park Assist L4 modules can be placed on top of the BB LEDlightpipe. The modules are a cable channel, power on ethernet device,ethernet cables, L4 module and movable covers.
L4 module clicks on top
Side View
Cable channelSlide covers
Power on ethernetmodule
24V DC Powersupply
Side View
We reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0c
15.Parkguidance
Page 12
12250EVO 12 40,19'
6000Part A 19,685'
6250Part B 20,505'
IsolatorEVO 12 or 8
Speaker integrated in part B of the EB 12 or 8 250 mm extra length
Speaker tested acc. To EN54-24Manufactured by DNH A/S Norway
We reserve the right to make changes without prior notice.
2015 BB-Lightconcepts manual BB LEDlightpipe EVO version 3.0c
Central control unit
The integrated evacuation and broadcasting system is available for EVO 12 and EVO 8 LED lines.The certified speaker is added in between the lighttubes of part B of the luminaire. The total length increases with 250 mm.An isolator is mounted with each speaker and in case of fire or accident the isolator will shut of the affected speakers.The rest off the speaker will remain intact due to the loop configuration.
Page 13
16.Integrated certified evacuation / broadcasting system