Page 1 of 303/27/2017 INS638, REV B

Capture 120 Degree 3Way Connections

INSTALLATION INSTRUCTIONS

TOOLS REQUIRED: • 5MM Allen Wrench• #2Phillips Screw Driver

NOTE: Inspect the contents of the box for shipping/ handling damage. Make sure you have all the parts before proceeding.

NOTE: Panels that are electrically connected shall also be mechanically interconnected.

NOTE: Panel Systems with cord type power feeds shall be mechanically contiguous and the combined length of the Panel System with electrically interconnected raceways shall not exceed 30 ft.

PARTS INCLUDED: Item Description 1 3Way Frame Bracket2 Spring Clip3 Cam4 Corner Light Block5 3Way Stacker Post6 Glass-toGlass Cam7 M8x50 Socket Head Cap Screw8 Corner Top Cap9 Corner Top Cap Alignment Clip

INSTALLATION INSTRUCTIONS:

WARNING: FOR EASE OF INSTALLATION,ALL ELECTRICAL COMPONENTS (POWER FEEDS & PASS-THRU HARNESSES) MUST BE PRE-ROUTED THROUGH THE FRAMES BEFORE CONNECTING THE FRAMES TOGETHER.

FRAME-TO-FRAME 3WAY CONNECTION:

1. Insert 3Way Frame Brackets thru the designated slots in the vertical rails of the Frames that create the 3Way condition. (FIG. 1)

- For 34” to 42” Frames, 2 brackets are provided to be used at the top and bottom locations. - For 50” to 66” Frames, 3 brackets are provided to be used at the top, bottom, and beltline locations. - For 74” to 98” Frames, 4 brackets are provided to be used at the top, bottom, beltline, and 66”h locations. 2. Place a Spring Clip on top of each bracket making sure to capture the engaging feature of the 3Way Frame Bracket. (FIG. 2A & 2B)

1 2 3 4 5

76

FIG. 1

FIG. 2A

3Way Frame Bracket

Frame

Spring Clip

Cam

FIG. 2B

8

9

Page 2 of 303/27/2017 INS638, REV B

3. Place a Cam onto each bracket and rotate it clockwise about 135° turn until the Cam stops. Do not overturn. (FIG. 2A & 2B)

4. Press the Corner Light Block into the snap features of the 3Way Frame Brackets. (FIG. 3)

GLASS STACKER-TO-GLASS STACKER 3WAY CONNECTION:

6. Follow Steps 1-4 for the Frame-to-Frame 3Way Connection.

7. Install the Glass Stackers to the top of the Frames per the Glass Stacker installation instructions.

8. Align the 3Way Stacker Post with the threaded insert in the vertical rails of the Glass Stacker. Place a Glass-to-Glass Cam in the gap between the Glass Stacker and the 3Way Stacker Post. Rotate the Glass- to-Glass Cam clockwise about 90o to lock the Glass Stacker in place. Repeat for each Glass Stacker. (FIG 4A & 4B)

9. Press the Corner Light Blocks into the snap features of the 3Way Stacker Post. (FIG. 5)

FRAME-TO-GLASS STACKER 3WAYCONNECTION:

10. Follow Steps 1-4 for the Frame-to-Frame 3Way Connection to the height of the shorter Frame.

11. Install the Glass Stacker(s) to the top of the shorter Frame(s) per the Glass Stacker installation instructions.

12. Align the 3Way Stacker Post with the top connection slot in the vertical rail of the taller height Frame(s). Fasten the 3Way Stacker Post to the Frame(s) using a M8x50 Socket Head Cap Screw(s). (FIG 6A & 6B)

13. Place a Glass-to-Glass Cam in the gap between the Glass Stacker and the 3Way Stacker Post. Rotate the Glass-to-Glass Cam clockwise about 90o to lock the Glass Stacker in place. Repeat for each Glass Stacker. (FIG. 7)

14. Press the Corner Light Blocks into the snap feature of the 3Way Stacker Post. (FIG. 8)

FIG. 5

FIG. 4A

FIG. 4B

FIG. 7

FIG. 6A FIG. 6B

FIG. 8

Corner Light Block

Corner Light Block

Glass-to-Glass Cam

3Way Stacker Post

(NOTE: FIGURES SHOWN WITH 2 OF 3 PANELS FOR CLARITY)

3Way Stacker Post

3Way Stacker Post

3Way Stacker Post

M8x50 Socket Head Cap Screw

3Way Stacker Post

3Way Stacker Post

Glass-to-Glass Cam

3Way Stacker Post

FIG. 3Corner Light Block

Page 3 of 303/27/2017 INS638, REV B, ECN 15418 © Trendway Corporation, 2017. Printed in USA.

TOP CAP CONNECTION:

15. Align the snap features of the Corner Top Cap Alignment Clip with the snap features of the Corner Top Cap. Press the Corner Top Cap Alignment Clip into the snap fea - tures. (FIG. 9A & 9B)

NOTE: Top Cap Alignment Clips are required to be installed in order to ensure proper Top Cap alignment.

16. If the layout requires additional Corner Top Cap Alignment Clips, repeat Step 15 where required. (FIG. 9A & 9B)

17. Align the legs of the Corner Top Cap with the 3Way condition, and press the Top Cap into place. (FIG. 10)

Corner TopCap

FIG. 9A

Leg

3WayCondition

FIG. 9B

FIG. 10

AssembledCorner Top Cap

Corner TopCap

Corner Top CapAlignment Clip