V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Installation Instructions,4x4 Post Anchor Kit (4x4-OPAK-LS) (56632)6x6 Post Anchor Kit (6x6-OPAK-LS) (56633)8x8 Post Anchor Kit (8x8-OPAK-LS) (56634)

Installation Instructions, 56632-34 1

All sizes of Ornamental Post Anchors will be installed the same.

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Choose your installation methodInstallation Instructions, 56632-34 3

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

50880 accessoryInstallation Instructions, 56632-34 4

50880 shown with customer applied black finish. suggest

spray can truck bedliner

optional accessory for extra stability#50880

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

post level #50740(sold separately)

not installedwhile driving

until 1/2 way

check angleevery 1"

repeat

sledge hammer

scrap piece

56632 shown

(not included)

install plates and screws

sledge hammerInstallation Instructions, 56632-34 5

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

jack hammer(rental)

JDK #20480(sold separately)

56632 shownuntil 1/2 way

check angleevery 1"

repeat

post level #50740(sold separately)

not installed while driving

JDKInstallation Instructions, 56632-34 6

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

MDK #20500(sold separately)

upper sectionslides up & downto drive post anchor

56632 shown

MDKInstallation Instructions, 56632-34 7

until 1/2 way

check angleevery 1"

repeat

post level #50740(sold separately)

not installed while driving

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

soil & grass

56632 shown

Post alignmentInstallation Instructions, 56632-34 8

====

post

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Typical Installation & Basic AssemblyInstallation Instructions, 56632-34 9

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Typical Installation & Basic AssemblyInstallation Instructions, 56632-34 10

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Typical Installation & Basic AssemblyInstallation Instructions, 56632-34 11

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

step 1

base mounting

38.101.50

additional instructionscenter post as shown in •previous stepsinstall 1 compression plate •with fastenersremove, reposition & reinstall •post/compression plate as shown with plate facing wallcomplete assembly as shown•

this procedure applies to all OZCO Post Bases & Post Anchors utilizing compression plates (56607 shown)

step 4

Special Instructions-mounting next to wallInstallation Instructions, 56632-34 12

step 2 step 3

V2.00 - Installation Instructions, Specifications and Project Plans are effective 5/8/2017 . This information is updated periodically and should not be relied upon after 2 years from 5/8/2017 . Please visit OZCOBP.com to get current information.

Idea'sInstallation Instructions, 56632-34 13