2
High Gain Compact Digital Professional Aerial Tilting mast clamp for easy adjustment Easy dipole assembly Unique compact folding design 12dB gain Length: 790mm Electronic 75Ω balun with F type connection Installation Instructions Congratulations on the purchase of your compact high gain digital aerial. The aerial is ideal for the reception of all available signals in medium and strong signal areas. The aerial is of particularly robust construction to ensure a long operating life and features: For optimum results install the aerial using double screened CAI approved digital coax cable (not supplied) and screened coax outlets (not supplied). You will need to fit the coax cable with an F type connector to connect to the aerial balun. 1. Preparing the coax cable downlead: First slide the rubber weather boot provided over the aerial end of the cable. Strip the end of the cable as shown in Fig. 1. Once you have stripped the cable, fold the braid back over the outer sheath making sure that no braid is touching the copper core, as this will cause a short on the cable and you will not get any signal. Also cut or tear away any foil shielding. 2. Twist the ‘F’ connector supplied on to the prepared aerial end of the cable and trim the central conductor see Fig. 2. Once you have installed your aerial and run and secured the cable prepare the other end for connection to an outlet or coax plug (not supplied). For best results the aerial should be mounted on an outdoor aerial mast and pointed in the direction of the nearest transmitter* making sure it is in a position where the transmitter signal will not be obstructed by nearby trees and buildings. If you are in any doubt about the direction in which the aerial should be pointing or the orientation of the aerial (horizontal for main transmitter, vertical for relay transmitter) check your neighbours’ aerials. 1. Unfold the booms as shown opposte. To lock the booms in position turn both of the two knobs on either side of the aerial in a clockwise direction through 180˚ making sure that the arrows line up with the locked symbol - see Fig. 4. fold braid back over sheath 8mm inner wire cut or tear away foil 6.5mm Fig. 1 screw connector body onto cable 2mm approx. end of insulation should be flush with this face Fig. 2 Locking knob Fig. 3a Fig. 4 Locked Symbol LAB350W USER GUIDE Fig. 3b Fig. 3c

Installation Instructions - Free Instruction Manuals

  • Upload
    others

  • View
    9

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Installation Instructions - Free Instruction Manuals

High Gain Compact Digital Professional Aerial

• Tiltingmastclampforeasyadjustment

• Easydipoleassembly

• Uniquecompactfoldingdesign

• 12dBgain

• Length:790mm

• Electronic75ΩbalunwithFtypeconnection

Installation Instructions

Congratulations on the purchase of your compact high gain digital aerial. The aerial is ideal for the reception of all available signals in medium and strong signal areas.

The aerial is of particularly robust construction to ensure a long operating life and features:

For optimum results install the aerial using double screened CAI approved digital coax cable (not supplied) and screened coax outlets (not supplied). You will need to fit the coax cable with an F type connector to connect to the aerial balun.

1.Preparingthecoaxcabledownlead:Firstslidethe rubberweatherbootprovidedovertheaerialendof thecable.Striptheendofthecableasshownin Fig.1.Onceyouhavestrippedthecable,foldthe braidbackovertheoutersheathmakingsurethatno braidistouchingthecoppercore,asthiswillcausea shortonthecableandyouwillnotgetanysignal. Alsocutortearawayanyfoilshielding.

2.Twistthe‘F’connectorsuppliedontotheprepared aerialendofthecableandtrimthecentralconductor seeFig.2.Onceyouhaveinstalledyouraerialand runandsecuredthecablepreparetheotherendfor connectiontoanoutletorcoaxplug(notsupplied).

Forbestresultstheaerialshouldbemountedonanoutdooraerialmastandpointedinthedirectionofthenearesttransmitter*makingsureitisinapositionwherethetransmittersignalwillnotbeobstructedbynearbytreesandbuildings.Ifyouareinanydoubtaboutthedirectioninwhichtheaerialshouldbepointingortheorientationoftheaerial(horizontalformaintransmitter,verticalforrelaytransmitter)checkyourneighbours’aerials.

1.Unfoldtheboomsasshownopposte.Tolockthe boomsinpositionturnbothofthetwoknobson eithersideoftheaerialinaclockwisedirection through180˚makingsurethatthearrowsline upwiththelockedsymbol-seeFig.4.

foldbraidbackoversheath

8mm

innerwire

cutortearawayfoil

6.5mm

Fig. 1

screwconnectorbodyontocable

2mmapprox.

endofinsulationshouldbeflushwiththisface

Fig. 2

Lockingknob

Fig. 3a

Fig. 4 LockedSymbol

LAB350W USER GUIDE

Fig. 3b

Fig. 3c

Page 2: Installation Instructions - Free Instruction Manuals

2. Nextfastenthebaluntotheundersideofthemain boomasshowninFig.5.Makesurethebalunisthe rightwayroundasshowninFig.4and8.

3. Fixthereflectorstothemainboomusingthebrackets andtheboltwithwingnutsuppliedasshownbelow inFig.6.

TroubleshootingNo picture:CheckallconnectionsfromaerialtoTV.Poor picture:CheckallconnectionsfromaerialtoTV.Checkaerialisproperlyalignedtothecorrecttransmitter.Iftheaerialhasbeenloftmountedtrymountingoutside.Makesurenewdigitalcoaxcablehasbeenusedthroughouttheinstallation.Checkthetransmittersignalisnotobstructedbynearbytreesorbuildings.Ifinaveryweaksignalareaorforlongcableruns,installingamastheadamplifierwillimprovethesignal.Ifinastrongsignalareathesignalstrengthmayneedtobereducedbyfittinganattenuator.

Caution Whenmountingtheassembledaerial,alwaysobservesafetyprecautionsandusethecorrectequipment.Unlessyouarecompetentintheuseofladdersandotheraccessequipment,donotworkoutdoorsatroofheight.Ifinanydoubt,refertoaqualifiedaerialinstaller.

©PhilexElectronicLtd.2011.v1.2

Fig. 5

4. Connecttheaerialdownleadtothe‘F’socketonthe aerialbalun(becarefulnottoovertightenthe Fconnectorasthiswilldamagethebalun).Ensure thattheweatherbootiscorrectlysecuredover the‘F’connectorandsocket-seeFig.8. Makesurethatthecoaxcableisroutedas showninFig.8(throughthemiddleofthe lowerreflector).Useinsulatingtape,to securethethecoaxdownleadtothe reflectorandmast.

5. Usethetiltingmastclampsuppliedtofix theaerialsecurelytothemast.Toadjustthe tiltangleloosenthetwobolts,tiltto horizontalandthenre-tightennuts(seeFig.9).

Fig. 6

Fig. 7

InsulatingTape

Fig. 8

FConnection

Reflector

WeatherBoot

Useful Websites for Digital Advice:*Toconfirmthatyourhomeisinacoveragearea,tofindoutwhichDTTchannelsshouldbeavailablelocallyandtofindoutwhereyournearesttransmitterisvisit:www.dtg.org.uk/industry/coverage.htmlandenterpostcode.Tofindoutyournearesttransmitter’sdistanceandcompassbearingselectTradeviewfromthetopbar.

Forfurtherinformation,pleasecontact:Customer careline: 08457 573479 (LocalRate-UKOnly)Technical Support: www.philex.com/support/

Fig. 9

Loosennutstoadjusttilt