Upload
gheorghe2
View
292
Download
1
Embed Size (px)
DESCRIPTION
Installation Instructions for VCDS version 11.11.3; 2012
Citation preview
Diagnostic Software for European Automobiles
Ross-Tech, LLC 881 Sumneytown Pike
Lansdale PA 19446, USA Tel: +1 267 638 2300
Installation Instructions for VCDS® version 11.11.3
The installer for version 11.11.1 and newer has several new options users should be aware of:
The vast majority of users who are installing VCDS for the first time or who are updating
from a version older than 11.11.1 don’t need to change anything on this screen and can
simply click the “Next” button. However, to avoid countless phone calls and e-mails asking
what these options do, we present this guide.
If you’re updating from 11.11.1 or 11.11.2, you can uncheck all the options for a speedier
install.
Clean-Up old USB Drivers is recommended if you’re updating from 11.11.0 or earlier and is
selected by default. This will remove most previously installed versions of Ross-Tech’s USB
drivers from your system, including those which came with 11.11.0 and were a source of
unstable communications on some PCs.
Install Standard USB Drivers is recommended for most PCs and is selected by default. These
are the same drivers which came with Release 10.6.5 and are considered quite stable.
Install Special USB Drivers should be used only on very late model PCs with Fresco Logic USB
3.0 chipsets. The previous stable drivers which are considered “Standard” in this Release
11.11.1 are not compatible with PCs that have Fresco Logic USB 3.0 ports and may cause
“BSOD” crashes on those machines, hence such machines should use these “Special” drivers
instead.
Install 32-bit EXE on 64-bit Systems can only be selected if your PC is running a 64-bit
Windows. The vast majority of users with 64-bit Windows do not need this option and should
use the 64-bit EXE files which are installed by default on those systems. However or 64-bit EXE
doesn’t work at all on a small percentage of 64-bit systems, and this option give those users an
immediate work-around.
Create Start Menu Shortcuts is selected by default and will put the usual entries in your Start
Menu. However, if you don’t want to clutter up your Start Menu, you can de-select this.
Create a Desktop Shortcut is selected by default and will put the usual shortcut on your
desktop. However, if you don’t want to clutter up your Desktop, you can de-select this.
A note about Driver Versions: If you’re updating from Beta 11.8, 11.10, or Release 11.11.0, on
some PCs (most often those running Windows XP) you may at some point see a message from
Windows that the driver files you are installing are older than the files already present on the
machine. This is normal and expected, and you should confirm that this is indeed what you
want to do.
This document is Copyright © 2012 by Ross-Tech, LLC, all rights reserved.
Unauthorized reproduction and re-distribution is explicitly prohibited.