INSTALLATION INSTRUCTIONS FOR PART 95 - … (without power package) 2007-2011 Yaris 2012-2017 Scion FR-S 2013-2016 iQ 2012-2015 tC 2005-2016 xA 2004-2006 ... – Toyota Yaris 2012-2017

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

The World’s best kits.® MetraOnline.com © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 8/31/17 INST95-8202

I N S TA L L AT I O N I N S T R U C T I O N S95-8202

KIT FEATURES• ISO DDIN radio provision

KIT COMPONENTS• A) ISO DDIN trim plate brackets

TOOLS REQUIRED• Cutting tool • Phillips screwdriver • Socket set • Dremel/grinder tool

TABLE OF CONTENTS

See Page 2

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: Please visit metraonline.com for wiring harness options

Antenna Adapter: Please visit metraonline.com for antenna adapter options

A

Toyota/Scion Multi-kit 2000-2017

APPLICATIONSSee inside front cover

1.800.221.0932 | MetraOnline.com2

APPLICATIONS TABLE OF CONTENTS

Toyota Rav-4 2001-2005 MR2 Spyder 2000-2005 Celica 2000-2005 Echo 2000-2005Highlander (without factory navigation) 2001-2007Matrix 2005-2008Matrix (with factory navigation) 2009-20104 Runner (excluding limited) 2003-2009Tundra 2003-2006Sequoia 2003-2007FJ Cruiser 2007-2014Yaris (without power package) 2007-2011Yaris 2012-2017

Scion FR-S 2013-2016iQ 2012-2015tC 2005-2016xA 2004-2006 xB 2004-2015 xD 2008-2014

Subaru BRZ 2013-2015Forester (with SD based navigation) 2009-2013

Dash Disassembly

– Toyota Rav4 2001-2005.............................................................. 3

– Toyota MR2 Spyder 2000-2005 ................................................. 3

– Toyota Celica 2000-2005 ...........................................................4

– Toyota Echo 2000-2005 .............................................................4

– Toyota Highlander 2001-2007 (without factory navigation) .......5

– Toyota Matrix 2005-2008...........................................................5

– Toyota Matrix 2009-2010 (with factory navigation) ....................6

– Toyota 4 Runner 2003-2009 (excluding limited) .................... 6-7

– Toyota Tundra 2003-2006 .......................................................7-8

– Toyota Sequoia 2003-2007 ........................................................8

– Toyota FJ Cruiser 2007-2014 .......................................................9

– Toyota Yaris 2007-2011 (without power package) ...................... 10

– Toyota Yaris 2012-2017 .............................................................. 11

– Scion FR-S 2013-2016 ................................................................. 11

– Scion iQ 2012-2015 .....................................................................12

– Scion xA 2004-2006 ..................................................................13

– Scion xB 2004-2006 ................................................................. 14

– Scion xB 2008-2015 .................................................................. 14

– Scion tC 2005-2010 ....................................................................15

– Scion tC 2011-2016 ......................................................................15

– Scion xD 2008-2014 .................................................................. 16

– Subaru BRZ 2013-2015 ...............................................................17

– Subaru Forester 2009-2013 (with SD based navigation) ...............17

Kit Preparation ...........................................................................18

Kit Assembly

–ISO DDIN radio provision ............................................................ 19

REV. 8/31/2017 INST95-8202 3

DASH DISASSEMBLY

Toyota Rav-4 2001-2005

1. Unclip and remove side panel from both sides of radio and climate controls. (Figure A)

2. Remove (4) Phillips screws securing the radio/climate control trim panel. (Figure B)

3. Remove (4) 10mm bolts securing the radio. (Figure C)

4. Unplug and remove radio.

5. Remove factory brackets from radio. Retain brackets for use during kit assembly.

Continue to Kit Preparation

(Figure C)

Toyota MR2 Spyder 2000-2005

1. Unsnap the lower trim piece from each side of the dash console and remove (2) Phillips screws exposed in each cavity. Remove the upper trim piece from each side of the console. (Figure A)

2. Remove the climate control knobs and (2) Phillips screws exposed. Remove the climate control trim bezel. (Figure A)

3. Remove the ashtray and (1) 10mm bolt exposed. Unclip the ashtray trim bezel and remove. (Figure A)

4. Unclip the radio trim bezel, remove (4) Phillips screws securing the radio and disconnect the wiring.


Continue to Kit Preparation(Figure A)

(Figure B)

(Figure A)


DASH DISASSEMBLY (CONT)

Toyota Celica 2000-2005

1. Unclip and remove the gear shifter trim bezel and remove (2) Phillips screws exposed below the climate controls. (Figure A)

2. Pull off climate control knobs and remove (2) Phillips screws exposed. (Figure A)

3. Unclip the climate control/factory radio trim bezel and remove. (Figure A)

4. Remove (4) 10mm screws securing the factory radio and disconnect the wiring.



(Figure A)

Toyota Echo 2000-2005

1. Remove the climate control knobs and (2) Phillips screws exposed. Unclip and remove the climate control trim bezel. Depress the side clips securing the climate control panel and move the panel to access (2) Phillips screws from the top of the factory radio brackets. (Figure A)

2. Remove the ashtray. Unclip and remove the radio trim bezel. Remove (2) Phillips screws from the bottom of the radio brackets and disconnect the wiring.



(Figure A)

REV. 8/31/2017 INST95-8202 5


Toyota Highlander 2001-2007 (without factory navigation)

1. Pull and remove dash panel from radio and climate controls. Tip: There are 8 clips. (Figure A)

2. Remove (6) 10mm bolts from radio and climate controls assembly. (Figure B)

3. Remove assembly and disconnect the wiring.

4. Remove (8) Phillips bolts and (4) Phillips screws to separate brackets from assembly. Retain brackets for use during kit assembly. (Figure C)


(Figure C)

Toyota Matrix 2005-2008

1. Unclip the bottom edge of the radio trim panel then lift up and out to remove. (Figure A)

2. Remove (4) 10mm bolts securing the factory radio. (Figure B)


(Figure B)

(Figure A)

(Figure A)

(Figure B)

SCAN

SEEKTRACK

TUNE

AM FM1 FM2 DISK



Toyota Matrix 2009-2010 (with factory navigation)

1. Unclip and remove the radio trim panel including the A/C vent. (Figure A)

2. Remove (4) 10mm bolts securing the factory radio. Unplug and remove the radio. (Figure B)


Toyota 4-Runner 2003-2009 (excluding limited)

1. Unsnap and remove trim from around shifter.

2. Unsnap and remove trim covers from around center console pocket edge at front and rear of console.

3. Unsnap and remove center console cover. (Figure A)

4. Unsnap trim ring from around ignition key cylinder.

5. Remove (1) 10mm bolt from bottom right of panel below steering column. Unsnap panel and pull away to gain access behind panel. (Figure B)

6. Remove (1) 10mm bolt on bottom left of center panel behind panel below steering column. (Figure B)

Continued on next page (Figure B)

(Figure A)

(Figure B)

A/C

0

1 2 3

45

(Figure A)

PASSENGER

SECURITY

A/C

0

1 2 3

45

REV. 8/31/2017 INST95-8202 7


Toyota 4-Runner 2003-2009 (Cont) (excluding limited)

7. Remove (1) 10mm bolt beneath climate control behind pocket door. Unsnap and remove climate control. (Figure C)

8. Remove (2) 10mm bolts beneath radio behind climate controls.

9. Unsnap and remove entire center panel around radio. (Figure D)

10. Remove (2) 10mm bolts securing radio.




(Figure C)

(Figure B)

Toyota Tundra 2003-2006

1. Remove the (3) climate control knobs by pulling straight outward. (Figure A)

2. Remove (3) Phillips screws from behind knobs. (Figure A)

3. Position vents facing upward and remove (1) Phillips screw from each A/C vent. (Figure B)

Continued on next page

(Figure B)

(Figure A)


Toyota Tundra 2003-2006 (Cont)

4. Unclip and remove entire trim panel. (Figure C)

5. Remove (4) 10mm bolts to remove radio. (Figure D)




(Figure D)

(Figure C)

Toyota Sequoia 2003-2007

1. Position vents facing upward and remove (1) Phillips screw from each A/C vent. (Figure A)

2. Unclip and remove entire radio trim panel including climate controls. (Figure B)

3. Remove (4) 10mm bolts to remove radio. (Figure C)




(Figure C)(Figure A)

(Figure B)


REV. 8/31/2017 INST95-8202 9


Toyota FJ Cruiser 2007-2014

1. Remove two Phillips screws from bottom part of side trim panels. (Figure A)

2. Using a panel removal tool, carefully remove the side trim panels. (Figure B)

3. Remove (2) Phillips screws from radio trim panel. (Figure C)

4. Using panel removal tool, carefully remove radio trim panel. (Figure D)

5. Remove (4) 10mm bolts securing the radio.




(Figure C)

(Figure A)

(Figure D)

(Figure B)



(Figure B)

(Figure A)

Yaris 2007-2011 (without power package)

1. Unclip the bottom trim panel located underneath the A/C controls. (Figure A)

2. Unclip the two side trim panels that surround the A/C controls and radio. (Figure A)

3. Unclip the Instrument trim Panel surrounding the speedometer and gauges. (Figure B)

4. Unclip the radio/AC vents trim panel. (Figure B)

5. Remove (4) Phillips screws securing radio. (Figure C)


7. Remove (4) Phillips screws securing factory brackets on each side of the radio and remove brackets. Retain brackets for use during kit assembly. (Figure D)


(Figure D)

(Figure C)

REV. 8/31/2017 INST95-8202 11


Yaris 2012-2017

1. Unclip and remove entire panel including A/C vent on passenger side of dash. (Figure A)

2. Unclip and remove the panel from around the radio. (Figure B)

3. Remove four 10 mm bolts and remove factory radio. (Figure C)


(Figure B)

(Figure A)

(Figure A)

Scion FR-S 2013-2014

1. Unclip and remove the panel from around the radio. (Figure A)

2. Remove four 10 mm bolts and remove factory radio. (Figure B)


(Figure B)



Scion iQ 2012-2015

1. Unclip and remove the climate control panel. (Figure A)

2. Unclip and remove the panel from around the radio. (Figure B)

3. Remove four 10 mm bolts and remove factory radio. (Figure C)


(Figure B)

(Figure A)

(Figure C)

REV. 8/31/2017 INST95-8202 13


(Figure B)

(Figure A)

(Figure D)

(Figure C)

Scion xA 2004-2006

1. Pull outward on the (3) climate control knobs and remove. (Figure A)

2. Remove (2) Phillips screws from behind the outer two climate knobs. (Figure B)

3. Unsnap and remove the trim pieces on each side of the climate control/ashtray/pocket assembly. (Figure C)

4. Remove (2) Phillips screws from the bottom of the climate control/radio trim panel and unsnap and remove the entire panel. (Figure D)

5. Remove (4) Phillips screws to remove the factory radio.





Scion xB 2008-2015

1. Unclip and remove the trim panel around the radio including the A/C vents. (Figure A)

2. Unclip and remove the trim panel at the bottom edge of the dash cavity. (Figure B)

3. Remove (4) 10mm bolts securing the radio. (Figure C)


(Figure C)

(Figure B)

(Figure A)

Scion xB 2004-2006

1. Pull outward on the (3) climate control knobs and remove. (Figure A)

2. Remove (2) Phillips screws from behind the outer (2) knobs. (Figure B)

3. Unsnap and remove the entire panel surrounding the climate controls and the radio. (Figure C)

4. Remove (4) Phillips screws to remove the factory radio.



(Figure A) (Figure B)

REV. 8/31/2017 INST95-8202 15


Scion tC 2005-2010

1. Unsnap trim from around shifter (not necessary to be removed). (Figure A)

2. Unclip and remove panel from around radio (including climate controls and radio door). (Figure B)

3. Remove (2) 10mm nuts from the top mounting locations and (2) 10mm bolts from the bottom mounting locations to remove the radio. (Figure C)



(Figure C)

(Figure B)

(Figure A)

Scion tC 2011-2016

1. Unclip and remove the radio trim panel. (Figure A)

2. Remove (4) 10mm bolts securing the radio. (Figure B)



(Figure B)

(Figure A)



Scion xD 2008-2014

1. Unclip radio trim panel. Unplug and remove panel. (Figure A)

2. Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure B)

3. Remove factory brackets from radio. Retain brackets for use during kit assembly. (Figure C)



(Figure C)

REV. 8/31/2017 INST95-8202 17


Subaru Forester (with SD based navigation) 2009-2013

1. Unclip and remove the trim panel surrounding the factory radio including the A/C vents. (Figure A)

2. Remove (4) Phillips screws securing the radio. Unplug and remove the radio. (Figure B)


Subaru BRZ 2013-2015

1. Unclip and remove the panel from around the radio. (Figure A)

2. Remove four 10 mm bolts and remove factory radio. (Figure B)


(Figure A)

(Figure B)

(Figure B)

(Figure A)

1 2 3 4 5

PTY/CAT MENU

CD/AUX

FM/AM

SAT

TEXT

RPT

SCAN

TUNE/TRACK/CHVOLUME


KIT PREPARATION

For the Scion tC (both generations) and xA:

Cut off the front upper section of the ISO DDIN trim plate brackets, as shown by the dotted lines labeled “A” in. (Figure A)

Continue to Kit Assembly

For the Toyota Rav-4 2001-2005, Toyota Highlander 2001-2007 (without factory navigation), Toyota Tundra 2003-2006 and Toyota Sequoia 2003-2007:

Cut off the rear section of the ISO DDIN trim plate brackets, as shown by the dotted lines labeled “B” in. (Figure A)


For the Scion FR-S 2013-2016 and Subaru BRZ 2013-2015:

Cut the ISO DDIN trim plate brackets as shown in. (Figure B)

Note: Care must be taken to cut this. A Dremel tool and a steady hand must be used. If the bracket is damaged you can still use the it by using the single screw hole leftover. If you do go this route, you will have to brace up the rear of the radio to prevent it from dropping down. (Figure B)


For all other vehicles skip to Kit Assembly.


If bracket is broken during trimming use this portion. Style of factory

brackets may differ.

Carefully cut-out the shaded area using a dremel tool to accommodate for the factory bracket.

A

A

B

B

AA

B

B

REV. 8/31/2017 INST95-8202 19

KIT ASSEMBLY

ISO DDIN radio provision

1. If applicable, remove the trim ring from the aftermarket radio.

2. Attach the factory mounting brackets and the ISO DDIN trim plate brackets to the radio with the screws supplied with the radio.

Note: Remove locating pins from factory brackets using a grinder tool.

3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the radio for proper operation.

4. Reassemble the dash in reverse order of disassembly.

Style of factory brackets may differ

KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

®

Metra recommends MECP certified technicians

IMPORTANTIf you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.


I N S TA L L AT I O N I N S T R U C T I O N S95-8202

¡PRECAUCIÓN! Todos los accesorios, interruptores, paneles de controles de clima y especialmente las luces del indicador de las bolsas de aire deben estar conectados antes ciclar la ignición. Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando.


I N S T R U C C I O N E S D E I N S TA L AC I Ó N95-8202

CARACTERÍSTICAS DEL KIT• ProvisiónderadioISODDIN

COMPONENTES DEL KIT•A)SoportesdeplacademolduraISODDIN

HERRAMIENTAS REQUERIDAS•Herramientadecorte•DestornilladorPhillips•Juegodetubos•HerramientaDremel/Grinder

INDICE

Vealapágina2

CABLEADO Y CONEXIONES DE ANTENA(sevendenporseparado)

Arnésdecableado:Visitemetraonline.compara lasopcionesdearnésdecableado

AntennaAdapter:Visitemetraonline.compara lasopcionesdeadaptadordeantena

A

Toyota/ScionMulti-kit2000-2017

APLICACIONESVer interior de la portada


APLICACIONES INDICE

Toyota Rav-4 2001-2005MR2Spyder 2000-2005Celica 2000-2005Echo 2000-2005Highlander(sin navegación de fábrica) 2001-2007Matrix 2005-2008Matrix (con navegación de fábrica) 2009-20104Runner(excluyendo limited) 2003-2009Tundra 2003-2006Sequoia 2003-2007FJCruiser 2007-2014Yaris(sin unidad de alimentación) 2007-2011Yaris 2012-2017

Scion FR-S 2013-2016iQ 2012-2015tC 2005-2016xA 2004-2006xB 2004-2015xD 2008-2014

Subaru BRZ 2013-2015Forester(con navegación basada en SD) 2009-2013

Desmontaje del tablero

– ToyotaRav42001-2005.............................................................. 3

– ToyotaMR2Spyder2000-2005................................................. 3

– ToyotaCelica2000-2005...........................................................4

– ToyotaEcho2000-2005.............................................................4

– ToyotaHighlander2001-2007(sin navegación de fábrica).........5

– ToyotaMatrix2005-2008...........................................................5

– ToyotaMatrix2009-2010(con navegación de fábrica)...............6

– Toyota4Runner2003-2009(excluyendo limited)................. 6-7

– ToyotaTundra2003-2006.......................................................7-8

– ToyotaSequoia2003-2007........................................................8

– ToyotaFJCruiser2007-2014.......................................................9

– ToyotaYaris2007-2011(sin unidad de alimentación)................. 10

– ToyotaYaris2012-2017.............................................................. 11

– ScionFR-S2013-2016................................................................. 11

– ScioniQ2012-2015.....................................................................12

– ScionxA2004-2006..................................................................13

– ScionxB2004-2006................................................................. 14

– ScionxB2008-2015.................................................................. 14

– SciontC2005-2010....................................................................15

– SciontC2011-2016......................................................................15

– ScionxD2008-2014.................................................................. 16

– SubaruBRZ2013-2015...............................................................17

– SubaruForester2009-2013(con navegación basada en SD)........17

Preparación del kit....................................................................18

Ensamble del kit

–ProvisiónderadioISODDIN....................................................... 19

REV. 8/31/2017 INST95-8202 3

DESMONTAJE DEL TABLERO

Toyota Rav-4 2001-2005

1. Desengancheyquiteelpanellateraldeambosladosdelradioyloscontrolesdelclima.(FiguraA)

2. Quitelos(4)tornillosPhillipsquesujetanelpaneldelamolduradelradio/controldeclima.(FiguraB)

3. Quitelos(4)pernosde10mmquesostienenelradio.(FiguraC)

4. Desconecteyretireelradio.

5. Quitelossoportesdefábricadelradio.Guardelossoportesparausarlosalensamblarelkit.

Continúe con la Preparación del Kit

(Figura C)

Toyota MR2 Spyder 2000-2005

1. Desenganchelapiezademoldurainferiordecadaladodelaconsoladeltableroyquitelos(2)tornillosPhillipsquequedanalavistaencadacavidad.Quitelapiezademoldurasuperiordecadaladodelaconsola.(FiguraA)

2. Quitelasperillasdecontroldeclimaylos(2)tornillosPhillipsquequedanalavista.Quiteelbiseldelamolduradelcontroldeclima.(FiguraA)

3. Quiteelceniceroy(1)10mmpernoexpuesto.Desengancheelbiseldelamolduradelceniceroyquítelo.(FiguraA)

4. Desengancheelbiseldelamolduradelradio,quitelos(4)tornillosPhillipsquesujetanlaunidadydesconecteelcableado.


Continúe con la Preparación del Kit(Figura A)

(Figura B)

(Figura A)


DESMONTAJE DEL TABLERO (CONT)

Toyota Celica 2000-2005

1. Desengancheyquiteelbiseldelamolduradelapalancadevelocidadesyquitelos(2)tornillosPhillipsexpuestosdebajodeloscontrolesdelclima.(FiguraA)

2. Quitelasperillasdecontroldeclimaylos(2)tornillosPhillipsquequedanalavista.(FiguraA)

3. Desengancheelbiseldelcontroldeclima/molduradelradiodefábricayquite.(FiguraA)

4. Quitelos(4)tornillosde10mmquesujetanelradiodefábricaydesconecteelcableado.



(Figura A)

Toyota Echo 2000-2005

1. Quitelasperillasdecontroldeclimaylos(2)tornillosPhillipsquequedanalavista.Desengancheyquiteelbiseldelamolduradelcontroldeclima.Presionelosganchoslateralesquesujetanelpaneldelcontroldeclimaymuevaelpanelparaaccesarlos(2)tornillosPhillipsdesdelapartesuperiordelossoportesdelradiodefábrica.(FiguraA)

2. Quiteelcenicero.Desengancheyquiteelbiseldelamolduradelradio.Quitelos(2)tornillosPhillipsdelaparteinferiordelossoportesdelradioydesconecteelcableado.



(Figura A)

REV. 8/31/2017 INST95-8202 5


Toyota Highlander 2001-2007 (sin navegación de fábrica)

1. Jaleyquiteelpaneldeltablerodelradioyloscontrolesdelclima.Sugerencia:Hay8ganchos.(FiguraA)

2. Quitelos(6)pernosde10mmdeloscontrolesdelradioyclima.(FiguraB)

3. Quiteelensambleydesconecte elcableado.

4. Quitelos(8)pernosPhillipsylos(4)tornillosPhillipsparasepararlossoportesdelensamble.Guardelossoportesparausarlosalensamblarelkit.(FiguraC)


(Figura C)

Toyota Matrix 2005-2008

1. Desengancheelbordeinferiordelpaneldelamolduradelradioyluegolevanteyretire.(FiguraA)

2. Quitelos(4)pernosde10mmquesujetanelradiodefábrica.(FiguraB)


(Figura B)

(Figura A)

(Figura A)

(Figura B)

SCAN

SEEKTRACK

TUNE

AM FM1 FM2 DISK



Toyota Matrix 2009-2010 (con navegación de fábrica)

1. Desengancheelbordeinferiordelpaneldelamolduradelradioyluegolevanteyretire.(FiguraA)

2. Quitelos(4)pernosde10mmquesujetanelradiodefábrica.(FiguraB)


Toyota 4-Runner 2003-2009 (excluyendo limited)

1. Suelteapresiónyretirelamolduradealrededordelapalancadevelocidades.

2. Suelteapresiónyquitelastapasdelamolduradealrededordelbordedelacavidaddelaconsolacentralalfrenteyatrásdelaconsola.

3. Suelteapresiónyquitelatapadelaconsolacentral.(FiguraA)

4. Suelteapresiónelanillodemolduraquerodeaelcilindrodelallavedemarcha.

5. Quite(1)pernode10mmdelaparteinferiorderechadelpaneldebajodelacolumnadedirección.Suelteapresiónelpanelyjaleparaobteneraccesoatrásdelpanel.(FiguraB)

6. Quite(1)pernode10mmdelaparteinferiorizquierdadetrásdelpaneldebajodelacolumnadedirección.(FiguraB)

Continua en la siguiente pagina

(Figura B)

(Figura A)

(Figura B)

A/C

0

1 2 3

45

(Figura A)

PASSENGER

SECURITY

A/C

0

1 2 3

45

REV. 8/31/2017 INST95-8202 7


Toyota 4-Runner 2003-2009 (Cont) (excluyendo limited)

7. Quite(1)pernode10mmdeabajodelcontroldeclima,detrásdelapuertadelacavidad.Suelteapresiónyquiteelcontroldelclima.(FiguraC)

8. Quitelos(2)pernosde10mmdeabajodelradioydetrásdeloscontrolesdelclima.

9. Suelteapresiónyquitetodoelpanelcentralquerodeaelradio.(FiguraD)

10. Quitelos(2)pernosde10mmquesostienenelradio.




(Figura C)

(Figura B)

Toyota Tundra 2003-2006

1. Quitelas(3)perillasdecontroldeclimajalandodirectamentehaciaelfrente.(FiguraA)

2. Quitelos(3)tornillosPhillipsdeatrásdelasperillas.(FiguraA)

3. Posicionelasrejillasorientadashaciaarribayquite(1)tornilloPhillipsdecadarejilladeaireacondicionado.(FiguraB)

Continua en la siguiente pagina

(Figura B)

(Figura A)


Toyota Tundra 2003-2006(Cont)

4. Desengancheyquitetodoelpaneldelamoldura.(FiguraC)

5. Quitelos(4)pernosde10mmparaquitarelradio.(FiguraD)




(Figura D)

(Figura C)

Toyota Sequoia 2003-2007

1. Posicionelasrejillasorientadashaciaarribayquite(1)tornilloPhillipsdecadarejilladeaireacondicionado.(FiguraA)

2. Desengancheyquitetodoelpaneldelamolduradelradio,incluyendoloscontrolesdelclima.(FiguraB)

3. Quitelos(4)pernosde10mmparaquitarelradio.(FiguraC)




(Figura C)(Figura A)

(Figura B)


REV. 8/31/2017 INST95-8202 9


Toyota FJ Cruiser 2007-2014

1. Quite(2)tornillosPhillipsdelapartedeabajodelospanelesdelamolduralateral.(FiguraA)

2. Conunaherramientaderemocióndepanel,quiteconcuidadolospanelesdelamolduralateral.(FiguraB)

3. Quitelos(2)tornillosPhillipsdelpaneldelamolduradelradio.(FiguraC)

4. Conlaherramientaderemocióndepanel,quiteconcuidadoelpaneldelamolduradelradio.(FiguraD)

5. Quitelos(4)pernosde10mmquesostienenelradio.



Continúe con la Preparación del Kit(Figura C)

(Figura A)

(Figura D)

(Figura B)



(Figura B)

(Figura A)

Yaris 2007-2011 (sin unidad de alimentación)

1. Desengancheelpaneldelamoldurainferiorlocalizadoabajodeloscontrolesdeaireacondicionado.(FiguraA)

2. Desenganchelosdospanelesdelamolduralateralquerodeanloscontrolesdeaireacondicionadoyelradio.(FiguraA)

3. Desengancheelpaneldelamolduradeinstrumentosquerodeaelvelocímetroylosindicadores.(FiguraB)

4. Desengancheelpaneldelamolduradelradio/lasrejillasdeaireacondicionado.(FiguraB)

5. Quitelos(4)tornillosPhillipsquesostienenelradio.(FiguraC)


7. Quitelos(4)tornillosPhillipsquesujetanlossoportesdefábricaacadaladodelradioyquitelossoportes.Guardelossoportesparausarlosalensamblarelkit.(FiguraD)


(Figura D)

(Figura C)

REV. 8/31/2017 INST95-8202 11


Yaris 2012-2017

1. Desengancheyquitetodoelpanel,incluyendolarejilladeaireacondicionadoeneltablerodelladodelpasajero.(FiguraA)

2. Desengancheyquiteelpaneldealrededordelradio.(FiguraB)

3. Quiteloscuatropernosde10mmyquiteelradiodefábrica.(FiguraC)


(Figura B)

(Figura A)

(Figura A)

Scion FR-S 2013-2014

1. Desengancheyquiteelpaneldealrededordelradio.(FiguraA)

2. Quiteloscuatropernosde10mmyquiteelradiodefábrica.(FiguraB)


(Figura B)



Scion iQ 2012-2015

1. Desengancheyquiteelpaneldelcontroldelclima.(FiguraA)

2. Desengancheyquiteelpaneldealrededordelradio.(FiguraB)

3. Quiteloscuatropernosde10mmyquiteelradiodefábrica.(FiguraC)


(Figura B)

(Figura A)

(Figura C)

REV. 8/31/2017 INST95-8202 13


(Figura B)

(Figura A)

(Figura D)

(Figura C)

Scion xA 2004-2006

1. Jalehaciaafueralas(3)perillasdecontroldeclimayquítelas.(FiguraA)

2. Quitelos(2)tornillosPhillipsdelapartedeatrásdelasdosperillasexterioresdelclima.(FiguraB)

3. Suelteapresiónyquitelaspiezasdemolduradecadaladodelensambledelcontroldeclima/cenicero/bolsillo.(FiguraC)

4. Quitelos(2)tornillosPhillipsdelaparteinferiordelpaneldelcontroldeclima/radioyluegosuelteapresiónyquitetodoelpanel.(FiguraD)

5. Quitelos(4)tornillosPhillipsparaquitarelradiodefábrica.





Scion xB 2008-2015

1. Desengancheyquiteelpaneldemolduraquerodeaelradio,incluyendolasrejillasdelaireacondicionado.(FiguraA)

2. Desengancheyquiteelpaneldemolduradelbordeinferiordelacavidaddeltablero.(FiguraB)

3. Quitelos(4)pernosde10mmquesujetanelradio.(FiguraC)


(Figura C)

(Figura B)

(Figura A)

Scion xB 2004-2006

1. Jalehaciaafueralas(3)perillasdecontroldeclimayquítelas.(FiguraA)

2. Quitelos(2)tornillosPhillipsdelapartedeatrásdelasperillasexteriores(2).(FiguraB)

3. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclimayaireacondicionado.(FiguraC)

4. Quitelos(4)tornillosPhillipsparaquitarelradiodefábrica.



(Figura A) (Figura B)

REV. 8/31/2017 INST95-8202 15


Scion tC 2005-2010

1. Suelteapresiónlamolduraquerodealapalancadevelocidades(noesnecesarioquitarla).(FiguraA)

2. Desengancheyquiteelpanelquerodeaelradio(incluyendoloscontrolesdelclimaylapuertadelradio).(FiguraB)

3. Quite(2)tuercasde10mmdelasubicacionessuperioresdemontajey(2)pernosde10mmdelasubicacionesinferioresdemontajeyquiteelradio.(FiguraC)



(Figura C)

(Figura B)

(Figura A)

Scion tC 2011-2016

1. Desengancheyquiteelpaneldelamolduradelradio.(FiguraA)

2. Quitelos(4)pernosde10mmquesostienenelradio.(FiguraB)



(Figura B)

(Figura A)



Scion xD 2008-2014

1. Desengancheelpaneldemolduradelradio.Desconecteyretireelpanel.(FiguraA)

2. Retirelos(4)tornillosPhillipsquesostienenelradio.Desconecteyquiteelradio.(FiguraB)

3. Quitelossoportesdefábricadelradio.Guardelossoportesparausarlosalensamblarelkit.(FiguraC)



(Figura C)

REV. 8/31/2017 INST95-8202 17


Subaru Forester (con navegación basada en SD) 2009-2013

1. Desengancheyquiteelpaneldemolduraquerodeaelradiodefábrica,incluyendolasrejillasdelaireacondicionado.(FiguraA)

2. Retirelos(4)tornillosPhillipsquesostienenelradio.Desconecteyquiteelradio.(FiguraB)


Subaru BRZ 2013-2015

1. Desengancheyquiteelpaneldealrededordelradio.(FiguraA)

2. Quiteloscuatropernosde10mmyquiteelradiodefábrica.(FiguraB)


(Figura A)

(Figura B)

(Figura B)

(Figura A)

1 2 3 4 5

PTY/CAT MENU

CD/AUX

FM/AM

SAT

TEXT

RPT

SCAN

TUNE/TRACK/CHVOLUME


PREPARACIÓN DEL KIT


Sielsoporteserompeduranteelrecorte,useestaporción. Elestilodelossoportesde

fábricapuedeserdiferente.

CorteconcuidadoeláreasombreadautilizandounaherramientaDremelparahacerespacioparaelsoportedefábrica.

A

A

B

B

AA

B

B

Para el Scion tC (ambas generaciones) y xA:

Corte la sección delantera superior de las placas de moldura doble DIN como se muestra en las líneas punteadas rotuladas “A” en la . (Figura A)

Continúe con Ensamble del kit

Para Toyota Rav4 2001-2005, Toyota Highlander 2001-2007 (sin navegación de fábrica), Toyota Tundra 2003-2006 y Toyota Sequoia 2003-2007:

Corte la sección trasera de las placas de moldura doble DIN como se muestra en las líneas punteadas rotuladas “B” en la. (Figura A)


Para Scion FR-S 2013-2016 y Subaru BRZ 2013-2015:Corte la placa de moldura doble DIN como se muestra en la. (Figura B)

Nota: Debe tener cuidado al cortar. Debe utilizar una herramienta Dremel y una mano firme. En caso de que el soporte esté dañado, puede utilizarlo usando el orificio sobrante para un solo tornillo. Si elige esta opción, tendrá que soportar la parte posterior del radio para impedir que caiga. (Figura B)


Para todos los demás vehículos, proceda al ensamble de kit.

REV. 8/31/2017 INST95-8202 19

ENSAMBLE DEL KIT

Provisión de radio ISO DDIN

1. Siaplica,retireelanillodemolduradelradiodemercadosecundario.

2. ColoquelossoportesdemontajedefábricaylassoportesdeplacasdemolduraISODDINalradioconlostornillossuministradosconlaunidad.(FiguraB)

Nota: Quite las clavijas localizadoras de los soportes de fábrica con la rectificadora.

3. Ubiqueelarnésdecableadodefábricaeneltablero.MetrarecomiendaelusodeunadaptadoradecuadodeacoplamientodeMetraodeAXXESS.Pruebelaunidadparaverificarquefuncionecorrectamente.

4. Vuelvaaarmareltableroalrevésdecomolodesarmó.

Lossoportesdefábricapuedenserdiferentes

KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

®

Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP).

EL CONOCIMIENTO ES PODERMejore sus habilidades de instalación y fabricación inscribiéndose en la escuela de dispositivos electrónicos móviles más reconocida y respetada de nuestra industria. Regístrese en www.installerinstitute.com o llame al 800-354-6782 para obtener más información y avance hacia un futuro mejor.

IMPORTANTESi tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.


I N S T R U C C I O N E S D E I N S TA L AC I Ó N95-8202

Documents

INSTALLATION INSTRUCTIONS FOR PART 95 - … (without power package) 2007-2011 Yaris 2012-2017 Scion FR-S 2013-2016 iQ 2012-2015 tC 2005-2016 xA 2004-2006 ... – Toyota Yaris 2012-2017