Installation Instructions for Model 2012 Console Safe

Lock'er Down® is a registered Trademark of Lock'er Down, Inc. US Reg. Number 4183198 All Rights reserved.

First remove the cover on the underside of the console lid to expose the four screws attaching the lid to the hinge.

On either end of the hinge is a plastic cover that must be removed next. You can use a small screw driver or even a finger nail. Detailed photos on back.

Now, remove the two bolts holding the console to the truck body. You will need a 10MM socket.

Place the Lock’er Down Console Safe inside the console and attach to the truck body through the console with the supplied longer bolts.

Reverse the procedure above to reinstall the console hinge and lid. We hope you enjoy.

X X

Red X’s mark plastic covers that must be removed tp access hinge screws.