Installation Instructions

EPLAN Education

Version 2.1 Level: 10 / 2011

EPLAN Software & Service GmbH & Co. KG

Technical Information

Copyright © 2011 EPLAN Software & Service GmbH & Co. KG

EPLAN Software & Service GmbH & Co. KG assumes no liability for either technical or printing errors, or for deficiencies in this technical information and cannot be held liable for damages that may result directly or indirectly from the delivery, performance, and use of this material.

This document contains legally protected proprietary information that is subject to copyright. All rights are protected. This document or parts of this document may not be copied or reproduced by any other means without the prior consent of EPLAN Software & Service GmbH & Co. KG.

The software described in this document is subject to a license agreement. The use and reproduction of the software is only permitted within the framework of this agreement.

RITTAL® is a registered trademark of Rittal GmbH & Co. KG.

EPLAN®, EPLAN Electric P8®, EPLAN Fluid®, EPLAN PPE®, and EPLAN Cabinet® are registered trademarks of EPLAN Software & Service GmbH & Co. KG.

Windows NT®, Windows 2000®, Windows XP®, Windows Vista®, Microsoft Windows®, Microsoft® Excel®, Microsoft® Access® and Notepad® are registered trademarks of the Microsoft Corporation.

PC WORX®, CLIP PROJECT®, and INTERBUS® are registered trademarks of Phoenix Contact GmbH & Co.

AutoCAD® and AutoCAD Inventor® are registered trademarks of Autodesk, Inc.

STEP 7®, SIMATIC® and SIMATIC HW Config® are registered trademarks of Siemens AG.

InstallShield® is a registered trademark of InstallShield, Inc.

Adobe® Reader® and Adobe® Acrobat® are registered trademarks of Adobe Systems Inc.

TwinCAT® is a registered trademark of Beckhoff Automation GmbH.

Unity Pro® is a registered trademark of Schneider Electric.

RSLogix 5000® and RSLogix Architect® are registered trademarks of Rockwell Automation.

All other product and trade names and company names are trademarks or registered trademarks of their respective owners.

EPLAN uses the Open Source software 7-Zip (7za.dll), Copyright © by Igor Pavlov. The source code of 7-Zip is subject to the GNU Lesser General Public License (LGPL). The source code of 7-Zip as well as details on this license are available on the following Internet page: http://www.7-zip.org

EPLAN uses the Open-Source-Software Open CASCADE, Copyright © by Open CASCADE S.A.S. The source code of Open CASCADE are subject to the Open CASCADE Technology Public License. For the Open CASCADE source code and more details about this license, go to: http://www.opencascade.org

26.10.2011 3/17

Table of contents

4/17 26.10.2011

26.10.2011 5/17

Introduction

EPLAN Software & Service

EPLAN Software & Service engineering solutions has been developing software to speed up the product development process for more than 25 years. Interdisciplinary expert systems assure productivity and data inte-gration to the highest degree. As a solution provider, we develop PDM and PLM concepts tailored to our customers' requirements, and offer comprehensive services like customization, consulting and training.

Innovative expertise in development, consistently orientated to your day-to-day needs, and an international presence all contribute to our suc-cess.

EPLAN is part of Rittal International and is therefore a subsidiary of the Friedhelm Loh Group, with 11,500 employees worldwide and sales of 2.2 Bn € expected for 2011. EPLAN is therefore synonymous with continuity and investment security. Seven German EPLAN locations and our pres-ence in 50 countries support 19,500 customers with 65,000 installations worldwide.

"Efficient Engineering" – is our company's motto and it emphasizes our competency in optimized and efficient processes, which support our cus-tomers in staying competitive over the long run.

EPLAN efficient engineering

Our motto stands for high-end solutions for engineering disciplines in in-dustrial automation engineering, and individually tailored adaptations and integrations of our systems into existing IT landscapes. Our cooperation with autodesk underscores top competencies in the field of mechanical design.

The customer request is the beginning – this is where many develop-ment and design processes, which end up involving all kinds of disci-plines usually start. Data relevant to the processes must be exchanged and synchronized across all project phases. The main focus, aside from the requirement of interdisciplinary engineering and production integra-

6/17 26.10.2011

tion, is creating machinery and plant documentation that reaches across all trades.

The core challenges are factors like globalized markets, cost and time pressure, increasing demands on documentation, as well as the ever stronger growing competition.

EPLAN products and services are geared to each other so that they op-timize your engineering processes and provide long-term support in the efficient and cost-effective realization of your projects.

EPLAN Platform – Your key to success

The revolutionary EPLAN platform technology allows you to unlock the future of cross-disciplinary engineering. The platform provides core func-tions that are required in electrical, as well as in fluid or EI&C engineer-ing equally.

All systems are fed from the same database. Furthermore, the platform contains uniform, interdisciplinary basic functions, like the graphical edi-tor, a common rights management, viewer, translation functions, and re-vision system. Of course it can be connected with third-party tools as well.

26.10.2011 7/17

8/17 26.10.2011

Prerequisites

Rights

To install EPLAN Education you need to posses local administrator rights, and after the installation the "Change" right for all EPLAN directo-ries (local and network).

Software

You will need to have Microsoft .Net Framework 4 installed on the work-station.

Please ask EPLAN for additional prerequisites.

Hardware

Recommended workstation configurations:

Processor: Comparable to an Intel Pentium D at 3 GHz or comparable to an Intel Core 2 Duo at 2.4 GHz

RAM: 4 GB *1

Hard disk: 160 GB

Monitor / graphics resolu-tion:

2-screen solution 21" or 16:10 graphics system with a resolution of 1680 x 1050

3D display: Graphics card from ATI or Nvidia with the latest OpenGL driver

*1: Individual functions like PDF or DXF output require more memory in connection with projects or very extensive

graphics.

26.10.2011 9/17

Installation

Starting setup

Put CD into the DVD drive of your computer. Setup starts automatically. If auto-run does not start on its own, double click the setup.exe file in the main directory of the CD.

Registration

You must register to be able to use EPLAN Education. This is necessary to associate your activation and create an appropriate validation code.

Please use the form integrated in the setup to send us your information.

10/17 26.10.2011

Your data input will be checked by us for plausibility. Then, after the check, we can send your personal validation code to your email address.

Should you not have internet access at that time, or missed the registra-tion, you can reregister at a later time via the internet by running the setup.exe file again.

License agreement

Please read the license agreement and accept it to continue the installa-tion.

26.10.2011 11/17

Target directories

Setup the target directories appropriately. The optimum basic settings for your system come from the setup file.

If several parallel installations of EPLAN Education in various versions exist, we recommend you install all data (program and master data) completely separate from each other.

Enter a unique code in the Company code line, for instance your last name or initials.

12/17 26.10.2011

26.10.2011 13/17

Standard installation

The setup function installs the following program components of EPLAN Education:

Start the installation.

Desktop

During the installation of EPLAN Education the following icon will be put on your computer's desktop as a link to the program:

14/17 26.10.2011

Starting the software

1. Double click the EPLAN Education icon on your desktop to start the software.

You will be prompted on how you want to validate the license.

2. Select "With a validation code".

3. Enter the validation code, which you received per email, in the follow-ing New validation code dialog and confirm your entry with [OK]. (Note the sample email on the following page.)

You have now completed the installation and registration. The software will start.

26.10.2011 15/17

Sample email

EPLAN Software & Service GmbH & Co. KG An der alten Ziegelei 2 40789 Monheim am Rhein · Germany Phone: +49 (0) 21 73 / 39 64-0 Fax: +49 (0) 21 73 / 39 64-25 Info@eplan.de · www.eplan.de