I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 1

Install Windows 10 Enterprise From CD Or From ISO

Dr. Tom Hicks Trinity University

Install Windows 10 Place Icons On Desktop

Configure File View Download & Install Chrome

Download & Install Notepad ++ Add Snipping Tool To Taskbar

Run Automatic Update Create Windows Share Folders

Configure Share Access To Your Computer Set Your Computer Name Configure Remote Desktop

1] The intent of this tutorial is to help those installing Windows 10 from CD as well as those installing Windows 10 on

VirtualBox. Push the Next Button.

2] Ppush the Install Now Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 2 3] Accept the terms. Push the Next Button.

4] Push the Custom Install Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 3 5] Push the Custom Install Button.

6] Your system should install Windows; you will see it getting devices ready. It will probably restart a time or two.

7] Push Use Express Settings.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 4 8] Select Join a Local Domain. Push the Next Button.

9] Enter your username and a password.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 5 10] Configure Cortana if you like. I will push the Not Now Button.

10] Windows Is Up & Running

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 6

Place Desktop Icons On Desktop

1] Right mouse-click on the desktop Select Personalize.

2] Push the Themes Button (left).

3] Push the Desktop Icons Button (right).

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 7 4] Check all 5 of the Desktop Icons. Push the Apply Button.

5] Push the OK Button. Close the Windows.

6] These desktop icons will make it easier to get to windows components.

Configure File View

1] Double-Click on the Control Panel.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 8 2] Hold down the Category Button Select Large Icons

3] Launch the File Explorer Option

4] Select the View Tab.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 9 5] Check Display the full path. Uncheck Hide empty drives. Uncheck Hide extensions. Push the Appy/OK Button.

6] Among other things, this will enable you to see the well know extensions such as .png, .pdf, .c, .cpp, .h,, etc. This is a one time configuration change.

Download & Install Chrome

https://www.google.com/chrome/?brand=CHBD&gclid=CjwKCAiAlO7uBRANEiwA_vXQ-_XtL7Jc_Ilpnvxwe-gO4pENfhBwcZsWHqxtyPYBqwNvhE86q9HZcBoC8OkQAvD_BwE&gclsrc=aw.ds

1] Navigate your browser to the link above. The page may look different. Push the Download Chrome Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 10 2] Push the Accept & Install Button.

3] Push the Save As Button.

4] Select the Desktop (on the left). Push the Save Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 11 5] Push the Run Button.

6] Push the Yes Button.

7] Your browser should now be functional. I recommend adding it to your credentials.

8] I recommend that you pin Chrome to both the task bar and the start menu.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 12

Download & Install Notepad ++

https://notepad-plus-plus.org/ 1] Navigate your browser to the link above. The page may look different. Push the Current Version Button (left).

2] Chose the Installer of your choice. I am going to choose the 64-bit. Both work well.

3] Double-Click on the Download.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 13 4] Push the Yes Button.

5] Push the OK Button.

6] Push the Next Button.

7] Push the I Agree Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 14 8] Push the Next Button.

9] Push the Next Button.

10] Push the Next Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 15 11] Push the Next Button.

12] I would recommend that you pin Notepad++ to the start menu and the taskbar. You will find a good text editor quite useful.

Add Snipping Tool To Taskbar

1] Enter Snipping Tool in the search portion of the taskbar (bottom left). Right Mouse Click on the Snipping Tool (top

left) Place it on both the start menu and the taskbar.

2] If you have followed these recommendations, your task bar should now have the following.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 16

Windows Update

1] Hold down the Start Menu Push the Settings Button (left)

2] Push the Update & Security Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 17 3] Since the Retry button is there, something did not install. We could push it again to see if it works? I would prefer

to view the history to see if it provides any insights. Push the Update History Button.

4] I can see that two of the history installs are pending a restart. Once we restart and allow these to complete, it is possible that the update that failed may be successful?

5] Right-Mouse Click on the Start Button Select Shut down or sign out Select Update and restart.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 18 6] Once the system restarts, login. It will probably take a couple minutes, or so, to complete the updates. Be patient

after you log in.

7] Return to your Windows Update history. I now see that two of the updates have been completed. But what about the most recent failure at the top?

8] When I return to my Windows Update, I notice that the system will start to download the failed update (may take a few minutes to start and will take a while to download.

9] I would encourage you to return to this tab and continue updating until your system is up to date.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 19

Create Windows Share Folders

1] Create folder C:\Share

2] Right-Click on folder C:\Share Select Properties

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 20 3] Select the Sharing Tab.

4] Push the Advanced Sharing Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 21 5] Check Share This Folder. Push the Permissions Button.

6] I have given full control everyone who has a username and password on this system group permissions. I have also given full control to thicks and administrator individual permissions. Push the OK Button.

5] I have also shared folder C:\ Administrator and thicks have full remote control of the entire hard drive.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 22

Configure Share Access To Your Computer

1] Right-Mouse Click on Networkr Select Properties.

2] Select Change Advanced Sharing Settings (left)

3] Configure the Private Network as shown below.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 23 4] Configure the Public Network as shown below.

5] Configure the All Networks as shown below.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 24 6] You can use ipconfig to determine your IP address. I have configured a static ip on my virtual machine. Most of

you will be getting dynamic IP addresses from your Internet supplier. Start a command prompt and run ipconfig

7] I am now going to access my two shared folders from another computer. Enter the IP (131.194.34.120) in the search window.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 25 8] Enter your credentials. Windows uses Pass-Through-Authentication. This means that if I had the same username

and password on both Cloud-2 and Cloud-20, the system would not bother asking me for credentials. Push the OK Button.

9] I can drag files and folders back and forth form Cloud-20 and Cloud-2.

Set Your Computer Name

1] Right-Mouse Click on this Computer Select Properties.

2] Select Advanced System Settings.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 26

3] Push the Change Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 27 4] Note that this computer name would not be very profound on a local area network. Change it to something

meaningful.

5] There have been times I named my personal computers with something like TomHicks or HicksLaptop. I have DNS entries for Cloud-20; I am going to use this. After you select your name, push the OK Button.

6] Restart Your System.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 28

Configure Remote Desktop

1] Right-Mouse Click on this Computer Select Properties.

2] Select Remote Settings (left).

3] Select Remote Connections to this computer. Push the Select Users Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 29 4] Push the Add Button.

5] Add your user name. Push the OK Button.

6] Push the OK Button.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 30 7] Push the OK Button.

8] You can use ipconfig to determine your IP address. I have configured a static ip on my virtual machine. Most of you will be getting dynamic IP addresses from your Internet supplier. Start a command prompt and run ipconfig

9] I am now on Cloud-2. I have started Remote Desktop, I enter the IP (131.194.34.120)

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 31 10] Enter your Windows UserName and Password.

11] Push the Yes Button.

12] I am now connected to my virtual machine.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 32

Software Engineering Tutorials

1] Historically, some students have come into Software Engineering with very little experience in Windows This

semester, we will be developing projects in Microsoft Visual Studio 2019.

Install—Configure-Visual-Studio.pdf

2] Database is an essential design component in today's software engineering. Well over 90% of applications utilize database; many of you will use it in internships and beyond. Since we do not have a required course in database the department has asked those teaching (1) CSCI-2320 to include at least 6 hours of database and (2) CSCI-3321 to include at least 8 hours of database. This fits very nicely in the design aspects of Software Engineering. We will begin with MySQL. Since some of you may choose to integrate portions of it with your Final Project, we are going to utilize MySQL in Windows.

Install-Configure-MySQL-Windows.pdf

3] Last year, I had some students with very little Windows Experience; they spent the first two-three weeks trying to get a Windows environment that they could use without coming to our labs.

4] WHAT DO I DO IF I DON"T HAVE A Windows 10 System?

A) You could come to the labs

B) If you are a MAC user, you could 1] Set up boot-camp (free) and run both Mac & Windows (if you have enough hard disk space). With this solution, you can run in both Windows & Mac OS but it requires a reboot. Easy to configure – check out YouTube for help. 2] Buy Parallels (educational $40-50) – allows you to run in both Windows & Mac at same time (if you have enough hard disk space). I use this myself. 3] Install VirtualBox on your Mac and create a Windows Virtual Image. C) If you are a LINUX user, you could 1] Partition your hard drive (if you have enough hard disk space) into two major portions – one for LINUX and one for Windows, Hard to configure – check out YouTube for help. 2] Install VirtualBox on your LINUZ and create a Windows Virtual Image.

D) You can come to me and I will give you remote access to one of my systems.

5] Several of my MAC and LINUX users during the past few years have chosen to do Virtual Box. Many of them had no experience with Virtualization. Installing VirtualBox is extremely easy (no-brainer). I have a tutorial that will help you set up a Windows Image.

Preparing-VirtualBox-Windows-10.pdf

6] Each of the approaches requires setting up Windows 10 from iso or cd. I have designed a tutorial to help. This tutorial would be worth reviewing if you are not comfortable with all of the following

A. Install Windows 10 G. Run Automatic Update B. Place Icons On Desktop H. Create Windows Share Folders C. Configure File View I. Configure Share Access To Your Computer D. Download & Install Chrome J. Set Your Computer Name E. Download & Install Notepad ++ K. Configure Remote Desktop F. Add Snipping Tool To Taskbar

Install-Configure-Windows-10.pdf

7] Your system could be a desktop that you remote into – if that is the case, make sure you have checked with IT to get a Windows 10 Professional or Windows 10 Enterprise version. The Home Versions just don't work.

I n s t a l l - C o n f i g u r e - W i n d o w s - 1 0 D r . T o m H i c k s P a g e | 33 8] If you want to do everything on your personal computer, you will need Microsoft Office. The Installation is so

simple, it hardly justifies a tutorial.

Install-Microsoft-Office-365.pdf

Configure Start Menu & Task Bar

1] On my virtual, I have installed only the tutorials above.

2] I encourage you to configure your Start Menu.

3] I also encourage you to place items that we will use a lot on your task bar.

4] The graphic below shows my Start Menu and Task Bar.