INSTALL PFSENSE+LUSCA

7/21/2019 INSTALL PFSENSE+LUSCA

1/36

INSTALL PFSENSE+LUSCA-CACHE IN VIRTUALBOX AND

USE A SEPARATE VIRTUAL DRIVE AS ITS CACHE

pfSense is an another type of protection for our vulnerable network. A modular router that can be

customize base on your network needs. It has the ability to act as a router or a firewall, or even

your cache server which means all your youtube, facebook, and other sites has being temporarilysaved in a storage and soon if someone in your LAN access the same website it can instantly

retrive or view without the irony of web page reload or to buffer the video again. That's why

your internet might become faster

than your previous setup when you use pfSense. But dont worry with the right settings that suites

your needs, your cache storage will not be full. Cache settings can be customized to overwritecache objects if the disk are full, so that your browsing, and live streaming experience will not be

affected. And the best of all, it is free because it is an opensource software.

Now this tutorial describes how to install PFSense and Lusca+Cache in Virtual Box. I prefer to

useVirtualBoxbecause I often use it for Virtualization.

First, you need to setup a pfSense Virtual Environment. Let say you have an existing network

setup and you don't want to disrupt the current network connectivity. It's like you have this kindof setup.

Basic network setup, w/o pfSense
https://www.virtualbox.org/wiki/Downloadshttps://www.virtualbox.org/wiki/Downloadshttps://www.virtualbox.org/wiki/Downloadshttp://2.bp.blogspot.com/--cVCc-T_qKQ/UocGxKTflwI/AAAAAAAAAHg/06IWQ0l5XPc/s1600/no_pf_sense_infra.pnghttps://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcRptd79p5irfGD8_Lw6F3x9r93K4O-XRPFI4E678n1AhWq1uVKohttps://www.virtualbox.org/wiki/Downloads


2/36

Then you need to do something like this,

In this case, pfSense is only an option. Use or not to use pfSense scenario.

Or, you totally remove your traditional router and replaced by pfSense(Hardware Mode)

But this time, we will only setup and configure the second one. The "optional" pfSenseinfrastructure. Since we have the existing network setup that we do not want to disrupt the

existing network. And at the same time we just want to test it first before bringt it to production

environment.

First, downloadpfSense-LiveCD-2.0.3-RELEASE-i386...iso

Note: latest pfSense build has a bug (I already test it), it happens after you install lusca-cache

package the proxy server gui doesn't show. Thats why I stick to the version 2.0.3.

Now, setup a pfSense Virtual Machine in your VirtualBox, Go to Settings, then StorageYou may notice that I have two virtual disk, which I will use as Primary Drive(8gb) for pfSense

and Secondary Drive(40gb) for Lusca-cache storage.
http://files.nyi.pfsense.org/mirror/downloads/old/pfSense-LiveCD-2.0.3-RELEASE-i386-20130412-1022.iso.gzhttp://files.nyi.pfsense.org/mirror/downloads/old/pfSense-LiveCD-2.0.3-RELEASE-i386-20130412-1022.iso.gzhttp://files.nyi.pfsense.org/mirror/downloads/old/pfSense-LiveCD-2.0.3-RELEASE-i386-20130412-1022.iso.gzhttp://4.bp.blogspot.com/-ggM1B6F3PZY/UocK-0WNHvI/AAAAAAAAAH4/kMkFjx1chlc/s1600/pf_sense_as_router.pnghttp://1.bp.blogspot.com/-v741wrpuDDk/UocIK6BMTuI/AAAAAAAAAHs/nLA7RdGXBHw/s1600/with_pf_sense_infra.pnghttp://files.nyi.pfsense.org/mirror/downloads/old/pfSense-LiveCD-2.0.3-RELEASE-i386-20130412-1022.iso.gz


3/36

Then setup the network for WAN and LAN interfaceGo to Network tab, then

Adapter 1 for your WAN Interface

Set it Bridge Adapterwhere it Attached to

Select your WAN Interfacewhere the internet connection from your host machine isconnected

Click the small arrow to collapse the Advancesection

Set Promiscuous Modeto Denyto disallow packets in and out your host and virtual

machine

Tick the Cable connected check box, it should be in check state Then click OK
http://4.bp.blogspot.com/-SlE1z6kLrU0/UowUI_ZZFJI/AAAAAAAAAQw/95QnXDlrSyI/s1600/1.1.pnghttp://2.bp.blogspot.com/-Vt5sAd8hB3c/UocMM6BYjVI/AAAAAAAAAIE/3_jSiJIJxgI/s1600/1.png


4/36

Adapter 2 for your LAN Interface

Set it Internal Networkwhere it Attached to

Select your LAN Interfacewhere the internet connection from your host machine is

connected

Click the small arrow to collapse the Advancesection

Set Promiscuous Modeto Allow VMsto allow packets in and out your virtual

machines Tick the Cable connected check box, it should be in check state

Then click OK

Then power onyour pfSense virtual machine
http://1.bp.blogspot.com/-CKypx5uLinM/UocOJnvlBeI/AAAAAAAAAIQ/6Q-P2jSGgbw/s1600/2.pnghttp://4.bp.blogspot.com/-Ut0HU0MOY3k/UowWlrXIZaI/AAAAAAAAAQ8/5efR93a-G6Q/s1600/1.2.png


5/36

While booting, pfSense will show an installation option. Press I on your keyboard

Then the Installation Wizard appears, Select Accept these Settings

Select Install pfSense
http://1.bp.blogspot.com/-9uOkculD1j0/UocSAsRUtNI/AAAAAAAAAJQ/7HtK8p0U448/s1600/2.3.pnghttp://3.bp.blogspot.com/-a9j8JR4LXkA/UocRpm5zNmI/AAAAAAAAAJI/9wW8yeOuuBY/s1600/2.2.pnghttp://1.bp.blogspot.com/--NiVEcPhY7o/UocRDFPjuPI/AAAAAAAAAJA/vaJxc88j-yI/s1600/2.1.png


6/36

Select storageto install pfSense. Here we need to select ad0 for pfSense Installation

Select Format this Disk

Select Use this Geometry
http://4.bp.blogspot.com/-_LoDve0uPAo/UocSo4k70NI/AAAAAAAAAJo/x_x_TONk9y4/s1600/2.6.pnghttp://2.bp.blogspot.com/-3gXP8ucyzKY/UocSgFCQssI/AAAAAAAAAJg/0d-hFU_EE-0/s1600/2.5.pnghttp://1.bp.blogspot.com/-QrUBm0DemQ0/UocSTkwzcvI/AAAAAAAAAJY/5KfENAgRtg4/s1600/2.4.png


7/36

Format ad0disk

Then, Partition disk

Select Accept and Create
http://4.bp.blogspot.com/-P59qJ6BDy2I/UocTNT64BbI/AAAAAAAAAKA/JhFVO0GFZqs/s1600/2.9.pnghttp://3.bp.blogspot.com/-Hl2m2SXi87c/UocS_uJ0ZSI/AAAAAAAAAJ4/VXVT4kG9l60/s1600/2.8.pnghttp://1.bp.blogspot.com/-vx4GEacvsSI/UocS0dtl-bI/AAAAAAAAAJw/RLGP-uNvfaA/s1600/2.7.png


8/36

Select Yes, partition ad0

Press enter to select OK, to continue

Select Accept and Install Bootblocks
http://1.bp.blogspot.com/-3YhqTxPT6bE/UocUlJDxhfI/AAAAAAAAAKk/s4HIiIzS5m4/s1600/2.12.pnghttp://2.bp.blogspot.com/-WnH6cs9C1xw/UocThvvtuPI/AAAAAAAAAKQ/EFyECf45Jjw/s1600/2.11.pnghttp://4.bp.blogspot.com/-dcR0HBaGrNs/UocTW9U7ceI/AAAAAAAAAKI/nYFwCiZsbBc/s1600/2.10.png


9/36

Select OK

Select 1st partitionto install pfSense

Select OK. WARNING! All data in primary partition will be deleted. Be sure you don't have

important files in it. And you know what you are doing
http://2.bp.blogspot.com/-wvLVXS-1uOU/UocVPotrLpI/AAAAAAAAAK8/rNXxgNXEef0/s1600/2.15.pnghttp://3.bp.blogspot.com/-jwH3j1xsmMk/UocU8S0c_cI/AAAAAAAAAK0/uoo6BdZy2Pw/s1600/2.14.pnghttp://1.bp.blogspot.com/-Eb_t4_vglns/UocUxi1nd7I/AAAAAAAAAKs/zmwodE2_8Xs/s1600/2.13.png


10/36

Select OKto proceed

Now in partitioning we don't need to modify it just select Accept and Create

Wait until the installation has been completed
http://4.bp.blogspot.com/-1jNOPSm7NPU/UocWFO-wIJI/AAAAAAAAALY/jvPOGpU1DYo/s1600/2.18.pnghttp://2.bp.blogspot.com/-vEf5X-fwSMQ/UocV8_mYdyI/AAAAAAAAALQ/2bam0qz3tD8/s1600/2.17.pnghttp://4.bp.blogspot.com/-6NOZ6gOihNg/UocVZ8VymdI/AAAAAAAAALE/yW89KtE6FSs/s1600/2.16.png


11/36

Select Symmetric multiprocessing...Then press enter

Now we need to press Esc on your keyboard many times until you are back on the main intall

page.

When you are back on the main install page, select Install pfSense then press enter
http://2.bp.blogspot.com/-HkkmVujU718/UorfdZ7-r2I/AAAAAAAAAMA/bUe0pNFQMFc/s1600/3.1.pnghttp://2.bp.blogspot.com/-xLlU-7bdUjU/UocWhaHZ4qI/AAAAAAAAALo/8OErSmOMxT0/s1600/2.20.pnghttp://1.bp.blogspot.com/-3rbFljT8CGY/UocWQejfbhI/AAAAAAAAALg/6kTb18Zo2bY/s1600/2.19.png


12/36

Nowfor lusca-cache we need select ad1 (40gb)

Select Format this Disk to format ad1 (40gb) storage for lusca-cache

Select Use this Geometry
http://3.bp.blogspot.com/-ilakxekUehU/UorhX84W-8I/AAAAAAAAAMg/NbULHsi8t98/s1600/3.4.pnghttp://2.bp.blogspot.com/-CCHIjARWr1Y/Uorgz9C0cNI/AAAAAAAAAMc/dMMDi7xe0UE/s1600/3.3.pnghttp://4.bp.blogspot.com/-sTRIWdyyNB4/UorgETX5VVI/AAAAAAAAAMI/9Nun_LggHdw/s1600/3.2.png


13/36

Select Format ad1 to proceed formatting, then it will show a loading screen very quickly

Select Partition Disk

Select Accept and Create by using down arrow
http://3.bp.blogspot.com/-2wGL3eJTVBo/UoriNroNZ3I/AAAAAAAAAM8/ym6lMmjKDY8/s1600/3.7.pnghttp://2.bp.blogspot.com/-HJkRnpZPXLY/UorhtttyZ7I/AAAAAAAAAMw/HhwmJUHCZKA/s1600/3.6.pnghttp://3.bp.blogspot.com/-PqZBN8mLPWo/Uorhg4jX8NI/AAAAAAAAAMo/Fh8SVjV6D7E/s1600/3.5.png


14/36

Select Yes, partition ad1

The wizard will prompt you that the disk was successfully partitioned, then press enter to

continue

Then it will want you to install bootblocks. You should just skip this step
http://4.bp.blogspot.com/-5zmYw6d8mac/UoryGXirelI/AAAAAAAAANc/rZ7jSNgI4Js/s1600/3.10.pnghttp://4.bp.blogspot.com/-qI2E5ypGp9E/UorxljufnxI/AAAAAAAAANU/qvy3jMDrCrg/s1600/3.9.pnghttp://2.bp.blogspot.com/-jlzn2LfhQ6g/Uoricmwp3FI/AAAAAAAAANE/tvn_XIP3erI/s1600/3.8.png


15/36

Then select a Partition to format

The wizard will prompt you to that it will erase all data. Hit OK to continue

Then it will prompt you again that it was formatted
http://1.bp.blogspot.com/-Pimd1ROCQgQ/Uor4Sv_dtZI/AAAAAAAAAOA/H6BDj9UlkLU/s1600/3.13.pnghttp://3.bp.blogspot.com/-fAepZ0cfubQ/Uorz5Se6PLI/AAAAAAAAAN0/ID2n3Dg7cyI/s1600/3.12.pnghttp://1.bp.blogspot.com/-w02-e4PpTAY/UorzCdPhGDI/AAAAAAAAANo/k2pNWk99d5I/s1600/3.11.png


16/36

Then you need to delete the default swap partition

And change mount point to /var/squid/cache or /cache, its up to you where do you want to putthe cache storage but be sure you are aware of that

Select Accept and Create to format the partition and begin the installation of pfSense
http://4.bp.blogspot.com/-EEkFiKzQUCc/Uor51Iu9RgI/AAAAAAAAAOY/42h7NSH7pj0/s1600/3.16.pnghttp://2.bp.blogspot.com/-XCSm9O9NyzY/Uor5ZU1QAOI/AAAAAAAAAOQ/Qcy4f0aNo-Y/s1600/3.15.pnghttp://3.bp.blogspot.com/-Qq1UREBLgnI/Uor46UmljDI/AAAAAAAAAOI/jsQ9o8O0faE/s1600/3.14.png


17/36

Because we deleted the swap partition and do not install pfSense, the installation will be

confused and comes back with an error. But don't worry this is normal, you just need to

proceed. Select OKto continue

Then press, Cancel

Press enter again to continue
http://4.bp.blogspot.com/-7vC4a7lGVpU/UosmV1i2xdI/AAAAAAAAAO8/JXsKZuoSjio/s1600/3.19.pnghttp://3.bp.blogspot.com/-D_xwzSD7gCI/Uor6uejNBnI/AAAAAAAAAOs/EdnhRjuUMTY/s1600/3.18.pnghttp://1.bp.blogspot.com/-qvvDIzLJF-o/Uor6dZtIxPI/AAAAAAAAAOk/B9M7mCd6avs/s1600/3.17.png


18/36

At this point you need to keep on pressing Esc buttonor Select Return to Select task until you

are back to the main install page.

Select 'reboot' and once its rebooted, then remove the CD

After the virtual machine restarted, wait until pfSense has been done loading
http://3.bp.blogspot.com/-vE_yUj6XreM/UocOdpC8hyI/AAAAAAAAAIY/klhTZEbsF30/s1600/3.pnghttp://2.bp.blogspot.com/-gTcQAuA-hio/UosvM6XO0oI/AAAAAAAAAPU/sdpFa4qNtmc/s1600/3.21.pnghttp://1.bp.blogspot.com/-r8641RnrZ1Q/Uosu2IG3tmI/AAAAAAAAAPM/jFUrBiVIw6M/s1600/3.20.png


19/36

Skip vlan setup

Assign WAN interface

Assign LAN interface, then select Y to enable DHCP on LAN, then if you asked for OPT1 then

just press enter to continue
http://3.bp.blogspot.com/-_76yhvtFVvE/UocPrDBh5nI/AAAAAAAAAI0/qlCGjGvYeS4/s1600/6.pnghttp://1.bp.blogspot.com/-6xLkk29OMK8/UocO865TYGI/AAAAAAAAAIo/rMlUfWceGts/s1600/5.pnghttp://1.bp.blogspot.com/-bs_ZvaoO6a4/UocOwsNySrI/AAAAAAAAAIg/ZWpV05T1d7w/s1600/4.png


20/36

Then you should be asked if you want to proceed, just type y and press enter

At this point you are now in the main menu of pfSense which you have privileges to setup other

features like enabling ssh (14). But for this instance, I need to change the LAN IP address of

pfSense to 192.168.5.1. So I we need to type 2 for Set interface(s) IP address

Type number 2 to configure LAN interface
http://3.bp.blogspot.com/-eJVvgYz_KJI/UowcgVrEeeI/AAAAAAAAARc/_k5t7rzDkxM/s1600/1.5.pnghttp://3.bp.blogspot.com/-IhRQuQ6jqvo/UowbYOsCdmI/AAAAAAAAARQ/12CGZOA4Llc/s1600/1.4.pnghttp://2.bp.blogspot.com/-a2sgcbnWfmI/Uowa7AeDOqI/AAAAAAAAARI/kCrfpdMC5Yc/s1600/1.3.png


21/36

Type the LAN IP address you wish to specify, then press enter

Then type its subnet bit count, which is 24 = 255.255.255.0

Then enable DHCP server on LAN
http://2.bp.blogspot.com/-WMCc-2MUFDU/UowdrafaPSI/AAAAAAAAAR0/rVN_vNKs9VE/s1600/1.8.pnghttp://2.bp.blogspot.com/-8Mu2xs8RYj0/UowdPzl6nMI/AAAAAAAAARs/7O8BelWod64/s1600/1.7.pnghttp://1.bp.blogspot.com/-BOjyVrmOXI8/Uowc3Z1tPsI/AAAAAAAAARk/vPcM3VpdeKo/s1600/1.6.png


22/36

Type the start address of client address range. Start = 192.168.5.100

Then type the end address of the client address range. End = 192.168.5.150

Type y to revert to HTTP as the webConfigurator
http://3.bp.blogspot.com/-hW1TsnTI1m4/UoweryFMFRI/AAAAAAAAASM/8-ILzI6YrgI/s1600/1.11.pnghttp://3.bp.blogspot.com/-3kjfKMZ-fDw/UoweT59CbZI/AAAAAAAAASE/LdknRjvpHnE/s1600/1.10.pnghttp://2.bp.blogspot.com/-Eek-U8Ctcl0/Uowd_zvor9I/AAAAAAAAAR8/Dgr-bpQOptA/s1600/1.9.png


23/36

Now since you have setup the NICs and IP addresses now,

Now we will going to configure the pfSense using the web gui, Go to your Virtual Box Manager,

select the appropriate client vm you will use to test your internet connection. In this instance I

will be using Windows XP Service pack 3 for testing purposes. Then press Settings button

Then go to Network tab, Adapter 1, then select Attached to Internal Network. We need to this for

us to avoid affecting the external network because we need to enable the pfSense DHCP on the

LAN side to test if its working.
http://1.bp.blogspot.com/-ETD0Rhe55dk/UowSYrXkV5I/AAAAAAAAAQc/nI-crswq0Fc/s1600/5.2.pnghttp://1.bp.blogspot.com/-dR0yRWIkqRA/UowQSH1Dm8I/AAAAAAAAAQI/KrEToA4dxUM/s1600/5.1.pnghttp://1.bp.blogspot.com/-2BwvV9piqy0/UowOta1uwsI/AAAAAAAAAP8/lIByoUNBNNU/s1600/4.0.png


24/36

Then power on your Windows VM, then you should see from your Local Area Connection

Status window, that Windows has been given an IP address of 192.168.5.100 by the pfSense

LAN DHCP.

To do this, your Windows network connection should be set as obtain ip address from dhcp

server.

Now we may configure pfSense, fire up your google chrome or any web browser you like, andtype the default gateway(router) ip address which is the pfSense 192.168.5.1

Type adminas Usernameand pfsenseas Password

Then press enter to login
http://3.bp.blogspot.com/-SqBPwXX8k8A/UowugVXn5II/AAAAAAAAASo/jr07GAOqjCQ/s1600/1.13.pnghttp://3.bp.blogspot.com/-U9eeFKo_TJg/UowtFZ4QjnI/AAAAAAAAASc/H3XCKy3ZkjE/s1600/1.12.png


25/36

Then you should be redirected to the pfSense configuration wizard, click Next

Next, customized your Hostname and Domain name

Set your timezone. Then, click Next
http://4.bp.blogspot.com/-OQ4yT3wMD-M/UoxSgnLO_SI/AAAAAAAAATg/THBo3gTaS1E/s1600/1.16.pnghttp://2.bp.blogspot.com/-542Td_Pg2bY/UoxRrBS7XOI/AAAAAAAAATU/MyChbgSVG0c/s1600/1.15.pnghttp://2.bp.blogspot.com/-VUVF0VaupBA/UoxGXw59LII/AAAAAAAAAS4/Y-LUKgnK-3w/s1600/1.14.png


26/36

Then, Browse down and click Next
http://4.bp.blogspot.com/-8PLcs8q71j8/UoxZByG2xkI/AAAAAAAAAUQ/J5DtWEYeNuU/s1600/1.19.pnghttp://1.bp.blogspot.com/-wkqkw-WrWc4/UoxYf4ChuMI/AAAAAAAAAT4/WdI1i3-LZ2M/s1600/1.18.pnghttp://1.bp.blogspot.com/-zLQP99UC128/UoxYIIme00I/AAAAAAAAATw/gP6S1Q0YmBk/s1600/1.17.png


27/36

Click Nextto proceed

Set your desired admin passwordand click Next
http://1.bp.blogspot.com/-6q4WQ3DfUow/UoxaHUWOnpI/AAAAAAAAAUk/_uOP5Sn2YbA/s1600/1.22.pnghttp://2.bp.blogspot.com/-EI_W_mDpKPQ/UoxZkpDemaI/AAAAAAAAAUc/KRcxkrqSpuM/s1600/1.21.pnghttp://3.bp.blogspot.com/-0VI4cR-r9mI/UoxYtOCyjFI/AAAAAAAAAUI/NzrJ7dNT6_M/s1600/1.20.png


28/36

Then wait for it finishes loading configuration

Then after it loads, click the herelink

Then you should redirected inside the pfSense web gui. where the Dashboard will be the defaultMain Page. Notice your WAN interface already acquired its IP address from your existing router.
http://2.bp.blogspot.com/-PE_4E4HUpH8/UoxlPR3HfHI/AAAAAAAAAVI/nqrE2P8-7Vk/s1600/1.25.pnghttp://2.bp.blogspot.com/-xSovZloNDK0/UoxkmXPP0XI/AAAAAAAAAU8/i_Y4DNAwEHc/s1600/1.24.pnghttp://2.bp.blogspot.com/-D1d3D_pFJ0k/UoxkXI0hu8I/AAAAAAAAAU0/88MHYbEhu9E/s1600/1.23.png


29/36

Then test your internet connection.

Then lets mount the second disk. Go to your fpSense gui, press 8on your keyboard to enter theshell where you can type in commands. We need to mount the second disk the ad1 to be use for

lusca-cache storage.

Then, type newfs /dev/ad1s1a or

Replace the '/dev/ad1s1a' with the proper name of your hard drive and the slice on your harddrive
http://2.bp.blogspot.com/-ho2B11FtzHU/UowOI57SrUI/AAAAAAAAAPw/CxodL09zYss/s1600/4.2.pnghttp://1.bp.blogspot.com/-tXZsE7BZiRE/UowLkfB4nTI/AAAAAAAAAPo/kOOSnj89c-s/s1600/4.1.pnghttp://1.bp.blogspot.com/-y7VO6E9ORM4/Uoxqr7MhedI/AAAAAAAAAVY/Le6fY-VXETs/s1600/1.26.png


30/36

This should show on your screen

Then edit fstab by typingvi /etc/fstabor ee /etc/fstaband add the following lines:/dev/ad1s1a /cache ufs rw 1 1

Press Esc to leave editor, and press enter
http://1.bp.blogspot.com/-JT4W8KaywNA/UoxtMDscfUI/AAAAAAAAAV0/vRQb88FjfTM/s1600/1.29.pnghttp://3.bp.blogspot.com/-KqQTBstJFoI/UoxsfmtGx5I/AAAAAAAAAVs/hg6_C-WXEiU/s1600/1.28.pnghttp://4.bp.blogspot.com/-N7Kj7NzoTrU/UoxrDvJC7HI/AAAAAAAAAVg/wQJaZls_EA8/s1600/1.27.png


31/36

And press enter again to save changes

Then changes has been save successfully, now type mount -a to mount the cache drive

An error will show saying No such file or directory, so we just need to mkdir /cacheto create

new folder/directory to the root(/) directory
http://1.bp.blogspot.com/-6YR5xjeFXOo/UoxuRN5kUOI/AAAAAAAAAWU/hfFk1BE_RQI/s1600/1.32.pnghttp://3.bp.blogspot.com/-TcgI8PYVbJU/UoxtwT16-PI/AAAAAAAAAWM/C13420iEbFU/s1600/1.31.pnghttp://3.bp.blogspot.com/-R7p0_hefEcg/UoxtgaR_hEI/AAAAAAAAAWE/sNjLSOJHAwY/s1600/1.30.png


32/36

Then it will show nothing but it already created the /cache directory. Then type mount -aagain

and it will show nothing again

But if you type df -h you may see it is now mounted. It should look like this

Now in your Windows client go to your pfSense web gui and go to Diagnostics, CommandPrompt and copy paste this code:

fetch http://pfsense-cacheboy.googlecode.com/svn/trunk/script/package.sh && chmod +x

package.sh && ./package.sh

Then, click Execute
http://1.bp.blogspot.com/-nrgA78HPb9k/Uox0FfjrmrI/AAAAAAAAAWw/YiUsi4H2G2E/s1600/1.35.pnghttp://4.bp.blogspot.com/-ETsRTxvrbeY/Uoxvx6NJeMI/AAAAAAAAAWk/T_JQ5K95XA0/s1600/1.34.pnghttp://2.bp.blogspot.com/-Jxzlbot3h80/Uoxu9JlqQPI/AAAAAAAAAWc/DFLDnWXNwB8/s1600/1.33.png


33/36

You should see this message, informing you that it's done

Then go to System, Package Manager, and Click Available Packages

Press Ctr+F on your keyboard to search for lusca-cache

Then click the + button to add/install lusca-cache

Click OK to continue if you've been asked by Chrome to install it

When the installation successfully completed, it should look like this
http://4.bp.blogspot.com/-2_6F8r1S9pY/Uox2kE0jNEI/AAAAAAAAAXY/VW1Z_dkHGmc/s1600/1.38.pnghttp://4.bp.blogspot.com/-JOkaOTChE8I/Uox1NSzGl3I/AAAAAAAAAXE/gtVu3zIlxzU/s1600/1.37.pnghttp://4.bp.blogspot.com/-sYb9pixRE5Q/Uox0jEG9fuI/AAAAAAAAAW4/-Z9nUJ_dRMo/s1600/1.36.png


34/36

Now go to Services, Proxy Server.

On the general tab, Tick the Transparent proxy check box

and Click save button below

Here on this tab, Select Hard disk cache systemto coss + aufs.

Then modify CossHard disk cache sizeto 100and for Hard disk cache size to 38000. It

depends on your configuration of virtual machine specs like HDD space, since we have only40gb cache storage we need to allocate 38000 in terms of mega bytes.

For COSS Hard disk cache location it would be /cache/coss. (if lusca doesn't create cossdirectory automatically, just mkdir coss inside /cache)

And for Hard disk cache locationit would be /cache

Maximum object size, higher than you declared value would not be cached but lower than

declared will be cached. Its up to you how many you want to allocate. But for this instance wewill just allocate 1gb which is 1024mbfor the Maximum object size

Then click save
http://1.bp.blogspot.com/-uNt9ue77Jt4/UpBqcd73a-I/AAAAAAAAAYg/7vweEsXtLwU/s1600/7.1.png


35/36

Now, since I prefer to choose to increase the download speed I decide to set 6024for Overall

bandwith throttling.

Click Save to save the settings
http://2.bp.blogspot.com/-4rWPqKMmffY/UpBrGLTzZTI/AAAAAAAAAY0/jXRSB-rd73E/s1600/7.3.pnghttp://1.bp.blogspot.com/-3LTNspmdm3M/UpBqp2tg-VI/AAAAAAAAAYo/Ph-UlqB0H8I/s1600/7.2.png


36/36

Then Go to Status at the Main Toolbar then click on Services to start the service

Then, Congratulation.. You have successfully installed and run the PFSense with Lusca-Cache.

Now what?

Go ahead and test it, if theres no changes in your internet performance you may tweak the

settings and play with it freely until you achieve your satisfaction. But remember, you must think

that there are many consideration that causes your internet connection to slow down, and I

cannot list here one by one for this post is only about the subject.
http://1.bp.blogspot.com/-UAQICxFJ2iY/UpBrs-cCPOI/AAAAAAAAAZE/6IfeuPqgFTI/s1600/7.4.png

Documents

INSTALL PFSENSE+LUSCA