206
Patent No. US 8,856,780 CA 2759622 20181121 REVISION DATE ADS-RSA-TL7-[HC2352AC] FIRMWARE HC2352AC HARDWARE ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED. VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE. ACCESSORIES DOCUMENT NUMBER 2016 LEXUS IS200T PTS AT www.idatalink.com Automotive Data Solutions Inc. © 2018 INSTALL GUIDE TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certifed Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certifed Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specifc notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of proft, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certifed Technicians, non- compliant Certifed Technicians or end users.

INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016 LEXUS IS200T PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 2: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 3: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T001_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 4: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 5: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T001_W

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) WHITE - 06

CANL (DATA) BLACK - 14

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 6: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 7: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 8: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 9: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017 LEXUS IS200T PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 10: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 11: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T010_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 12: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 13: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T010_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) BLACK - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 14: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 15: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 16: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus IS200t PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 17: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2014-2015 LEXUS IS250 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 18: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 19: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T001_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 20: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 21: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T001_W

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) WHITE - 06

CANL (DATA) BLACK - 14

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 22: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 23: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 24: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2015 Lexus IS250 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 25: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016 LEXUS IS300 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 26: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 27: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T001_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 28: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 29: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T001_W

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) WHITE - 06

CANL (DATA) BLACK - 14

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 30: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 31: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 32: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 33: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2018 LEXUS IS300 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 34: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 35: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T010_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 36: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 37: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T010_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) BLACK - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 38: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 39: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 40: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 41: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2014-2016 LEXUS IS350 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 42: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 43: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T001_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 44: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T001_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 45: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T001_W

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) WHITE - 06

CANL (DATA) BLACK - 14

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 46: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 47: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 48: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 49: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2018 LEXUS IS350 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 50: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 51: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T010_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 52: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T010_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 53: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T010_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) BLACK - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 54: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 55: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 56: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus IS350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 57: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2018 LEXUS LX570 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 58: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 59: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T006_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 60: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 61: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

T006_W

1

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) GREEN - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) PINK - 08

LOCK (-) GREEN - 29

UNLOCK (-) PINK - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) BLACK - 05

SLP (-) RED - 04

IGNITION (+) PINK - 06

12V (+) GREEN - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 62: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 63: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 64: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus LX570 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 65: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2015-2017 LEXUS NX200T PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 66: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 67: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

T002_H

1

3

4

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) GREEN - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

1 2

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 68: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 69: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

1

6

5 4 3 2 1

10 9 8 7

T002_W

3

3

2

2

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) GREEN - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, BELOW DASH FUSEBOX (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) WHITE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) YELLOW - 04

IGNITION (+) PINK - 06

12V (+) BLUE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

POWER LIFTGATE (-) RED - 05

AUTOLIGHT (-) GREEN - 08

LOCK (-) RED - 29

UNLOCK (-) LTGREEN - 02

1 2

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 70: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 71: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 72: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2017 Lexus NX200T PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 73: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2018-2019 LEXUS NX300 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 74: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 75: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

T002_H

1

3

4

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) GREEN - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

1 2

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 76: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 77: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

1

6

5 4 3 2 1

10 9 8 7

T002_W

3

3

2

2

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) GREEN - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, BELOW DASH FUSEBOX (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) WHITE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) YELLOW - 04

IGNITION (+) PINK - 06

12V (+) BLUE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

POWER LIFTGATE (-) RED - 05

AUTOLIGHT (-) GREEN - 08

LOCK (-) RED - 29

UNLOCK (-) LTGREEN - 02

1 2

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 78: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 79: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 80: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Lexus NX300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 81: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017 LEXUS NX300H PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 82: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 83: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

T002_H

1

3

4

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) GREEN - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

1 2

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 84: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T002_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 85: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

1

6

5 4 3 2 1

10 9 8 7

T002_W

3

3

2

2

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) GREEN - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, BELOW DASH FUSEBOX (B)

STEERING LOCK (C)

CANH (DATA) YELLOW - 14

CANL (DATA) WHITE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) YELLOW - 04

IGNITION (+) PINK - 06

12V (+) BLUE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

POWER LIFTGATE (-) RED - 05

AUTOLIGHT (-) GREEN - 08

LOCK (-) RED - 29

UNLOCK (-) LTGREEN - 02

1 2

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 86: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 87: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 88: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017 Lexus NX300h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 89: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2018 LEXUS RC300 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 90: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 91: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T006_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 92: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 93: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

T006_W

1

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) GREEN - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) PINK - 08

LOCK (-) GREEN - 29

UNLOCK (-) PINK - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) BLACK - 05

SLP (-) RED - 04

IGNITION (+) PINK - 06

12V (+) GREEN - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 94: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 95: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 96: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2018 Lexus RC300 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 97: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2015-2018 LEXUS RC350 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 98: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T004_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 99: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T004_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) PINK - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 100: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T004_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 101: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T004_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) LTGREEN OR YELLOW - 14

CANL (DATA) BLACK - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) PINK - 05

SLP (-) RED - 04

IGNITION (+) BLACK - 06

12V (+) GREEN - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) PINK - 08

LOCK (-) BLUE - 29

UNLOCK (-) LTGREEN - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 102: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 103: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 104: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2015-2018 Lexus RC350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 105: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2018 LEXUS RX350 PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 106: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T007_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 107: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T007_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) RED - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 108: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T007_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

CB

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 109: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

16

4

789

19

123

2021

101112

222324

131415

252627 171828

56

T007_W

1

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) LTBLUE - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) GREEN - 08

LOCK (-) PINK - 29

UNLOCK (-) PURPLE - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) RED - 05

SLP (-) GRAY - 04

IGNITION (+) PINK - 06

12V (+) PURPLE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 110: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 111: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 112: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX350 PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 113: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2018 LEXUS RX450H PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 114: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T014_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

D

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 115: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T014_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) RED - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLE - STARTER (+) OUTPUTPURPLE - STARTER (+) OUTPUT

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

STARTER (+) LtGREEN - 27

1: WHITE

CERTIFICATION ECU, BEHIND GLOVEBOX (D)

1

1

5

1821222324 1920252627

67891011121314151617

234

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 116: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T014_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

CB D

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 117: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

16

4

789

19

123

2021

101112

222324

131415

252627 171828

56

T014_W

1

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) LTBLUE - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) GREEN - 08

LOCK (-) PINK - 29

UNLOCK (-) PURPLE - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) RED - 05

SLP (-) GRAY - 04

IGNITION (+) PINK - 06

12V (+) PURPLE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

STARTER (+) LtGREEN - 27

1: WHITE

CERTIFICATION ECU, BEHIND GLOVEBOX (D)

1

1

5

1821222324 1920252627

67891011121314151617

234

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 118: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 119: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 120: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2018 Lexus RX450h PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 121: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2018-2019 TOYOTA C-HR PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 122: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T011_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 123: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T011_H

1

3

4

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

PTS (-) GRAY - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOTRED/WHITE•BLACK DOT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 124: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T011_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 125: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

T011_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) GRAY - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

MAIN BODY ECU, BELOW DASH FUSEBOX (B)

STEERING LOCK (C)

CANH (DATA) GREEN - 14

CANL (DATA) LTBLUE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) GREEN - 04

IGNITION (+) BLACK - 06

12V (+) BLUE - 07

HOOD SWITCH

1

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) WHITE - 08

LOCK (-) GREEN - 29

UNLOCK (-) BLUE - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 126: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 127: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 128: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2018-2019 Toyota C-HR PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 129: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2018 TOYOTA CAMRY HYBRID PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 130: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T013_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

E

CD

PAGE 2 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 131: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

T013_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1: BLACK

1: BLACK

PTS (-) GRAY - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: BLACK (K52)

2: BLACK (K53)

MAIN BODY ECU/DASH FUSEBOX (B)

STEERING LOCK (C)

HEADLAMP SWITCH (D)

CANH (DATA) TAN - 05

CANL (DATA) WHITE - 04

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) TAN - 04

IGNITION (+) LTGREEN - 06

12V (+) WHITE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) WHITE OR YELLOW - 05

STARTER (+) LTBLUE - 09

LOCK (-) LTGREEN - 18

UNLOCK (-) TAN - 17

TRUNK (-) LTGREEN - 04

12345678910111213141516

19202122232425262728293031323334353637383940

1718

12345

678910111213141516171819

202122282930 2324252627

12

1415161718192021

345678910111213

1

2

1: WHITE

HYBRID ECU, RIGHT OF DRIVER DASH FUSEBOX (E)

1: GRAY

123456

10111213141516

27 171819

282930

20212223242526

35 31323334

789

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 3 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 132: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 4 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 133: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 5 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 134: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 6 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 135: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2018 TOYOTA CAMRY PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 136: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T012_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 2 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 137: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

T012_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1: BLACK

1: BLACK

PTS (-) GRAY - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: BLACK (K52)

2: BLACK (K53)

MAIN BODY ECU/DASH FUSEBOX (B)

STEERING LOCK (C)

HEADLAMP SWITCH (D)

CANH (DATA) TAN - 05

CANL (DATA) WHITE - 04

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) TAN - 04

IGNITION (+) LTGREEN - 06

12V (+) WHITE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) WHITE OR YELLOW - 05

LOCK (-) LTGREEN - 18

UNLOCK (-) TAN - 17

TRUNK (-) LTGREEN - 04

12345678910111213141516

19202122232425262728293031323334353637383940

1718

12345

678910111213141516171819

202122282930 2324252627

12

1415161718192021

345678910111213

1

2

1: WHITE

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 3 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 138: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 4 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 139: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 5 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 140: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 6 OF 6

Patent No. US 8,856,780 CA 2759622 2018 Toyota Camry PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 141: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2019 TOYOTA COROLLA HATCHBACK PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 142: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T015_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

CD

PAGE 2 OF 6

Patent No. US 8,856,780 CA 2759622 2019 Toyota Corolla Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 143: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

7 6 5 4 3 2 1

T015_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1: BLACK

1: BLACK

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: BLACK

2: BLACK

MAIN BODY ECU/DASH FUSEBOX (B)

STEERING LOCK (C)

HEADLAMP SWITCH (D)

CANH (DATA) TAN - 05

CANL (DATA) WHITE - 04

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) RED - 04

IGNITION (+) RED - 06

12V (+) BLUE - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) YELLOW - 05

LOCK (-) GREEN - 18

UNLOCK (-) PURPLE - 17

12345678910111213141516

19202122232425262728293031323334353637383940

1718

12345

678910111213141516171819

202122282930 2324252627

12

1415161718192021

345678910111213

1

2

1: WHITE

1

7

2

8

3

9

4

10

5

11

6

12M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 3 OF 6

Patent No. US 8,856,780 CA 2759622 2019 Toyota Corolla Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 144: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 4 OF 6

Patent No. US 8,856,780 CA 2759622 2019 Toyota Corolla Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 145: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 5 OF 6

Patent No. US 8,856,780 CA 2759622 2019 Toyota Corolla Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 146: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 6 OF 6

Patent No. US 8,856,780 CA 2759622 2019 Toyota Corolla Hatchback PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 147: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2014-2016 TOYOTA HIGHLANDER HYBRID PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 148: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T003_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 149: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T003_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) GRAY - 05

PTS (-) PURPLE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 150: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T003_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

D

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 151: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T003_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) PURPLE - 06

CANL (DATA) WHITE - 14

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) GRAY - 05

SLP (-) LTGREEN - 04

IGNITION (+) RED - 06

12V (+) BLACK - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) BLACK - 08

LOCK (-) PURPLE - 29

UNLOCK (-) LTBLUE - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 152: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 153: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 154: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 155: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2019 TOYOTA HIGHLANDER HYBRID PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 156: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T009_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 157: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T009_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) GRAY - 05

PTS (-) PURPLE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 158: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T009_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 159: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T009_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) RED - 14

CANL (DATA) WHITE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) GRAY - 05

SLP (-) LTGREEN - 04

IGNITION (+) RED - 06

12V (+) BLACK - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) BLACK - 08

LOCK (-) PURPLE - 29

UNLOCK (-) LTBLUE - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 160: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 161: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 162: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander Hybrid PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 163: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2014-2016 TOYOTA HIGHLANDER PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 164: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T003_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 165: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T003_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) GRAY - 05

PTS (-) PURPLE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 166: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T003_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

D

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 167: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16

1 2 3 4 5 6

14

6 7 8

9

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T003_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (C)

STEERING LOCK (D)

CANH (DATA) PURPLE - 06

CANL (DATA) WHITE - 14

PTS SWITCH (A)

OBDII (B)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) GRAY - 05

SLP (-) LTGREEN - 04

IGNITION (+) RED - 06

12V (+) BLACK - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) BLACK - 08

LOCK (-) PURPLE - 29

UNLOCK (-) LTBLUE - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 168: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 169: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 170: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2014-2016 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 171: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2019 TOYOTA HIGHLANDER PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 172: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T009_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 173: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T009_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

TRUNK (-) GRAY - 05

PTS (-) PURPLE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 174: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T009_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 175: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

6

5 4 3 2 1

10 9 8 7

164

7

8

9

19

1

2

3

20

21

10

11

12

22

23

24

13

14

15

25

26

27

17

18

28

5

6

T009_W

1

1

1

3

3

2

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) PURPLE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) RED - 14

CANL (DATA) WHITE - 13

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) GRAY - 05

SLP (-) LTGREEN - 04

IGNITION (+) RED - 06

12V (+) BLACK - 07

HOOD SWITCH

1

2

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLE IS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

AUTOLIGHT (-) BLACK - 08

LOCK (-) PURPLE - 29

UNLOCK (-) LTBLUE - 02

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 176: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 177: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 178: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2017-2019 Toyota Highlander PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 179: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2019 TOYOTA LAND CRUISER PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 180: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 181: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T006_H

1

3

4

2

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

2: WHITE

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

POWER LIFTGATE (-) RED - 05

PTS (-) BLUE - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4JS8

TL6

RED/WHITE•BLACK DOT - TRUNK (-) OUTPUTRED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 182: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T006_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

C

B

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 183: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

16

28

15

27

14

26

13

25

12

24

11

23

10

22

9

21

8

20

7

19

6

18

5

17

4 3 2 1

T006_W

1

2

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) BLUE - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) GREEN - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) PINK - 08

LOCK (-) GREEN - 29

UNLOCK (-) PINK - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK (-) OUTPUT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

TRUNK (-) BLACK - 05

SLP (-) RED - 04

IGNITION (+) PINK - 06

12V (+) GREEN - 07

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIREDM1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 184: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 185: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 186: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Land Cruiser PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 187: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2017-2018 TOYOTA PRIUS PRIME PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 188: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T008_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

CB

D

PAGE 2 OF 6

Patent No. US 8,856,780 CA 2759622 2017-2018 Toyota Prius Prime PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 189: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

T008_W

10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9

323130292827262524 232221

201918171615141312 1110 9

8 7 6 5 4 3 2 1

1

1

2

54 53 52 51 50 49 48 47 46 45 44 43 42 41

40 39 38 37 36 35 34 33 32 31 30 29 28 27

26 25 24 23 22 21 20 19 18 17 16 15 14

13 12 11 10 9 8 7 6 5 4 3 2 1

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1: BLACK

1: BLACK

1: WHITE

PTS (-) GREEN - 01

STARTER (+) BLACK - 04

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

OBDII (D)

CANH (DATA) LTBLUE - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) BLACK OR WHITE - 08

LOCK (-) PURPLE - 29

UNLOCK (-) GREEN - 02

PTS SWITCH (A)

HYBRID VEHICLE CONTROL ECU, BEHIND GLOVE BOX (C)HYBRID VEHICLE CONTROL ECU, BEHIND GLOVE BOX (C)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

IGNITION (+) PURPLE - 10

12V (+) PURPLE - 16

GROUND (-) WHITE/BLACK - 04

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 3 OF 6

Patent No. US 8,856,780 CA 2759622 2017-2018 Toyota Prius Prime PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 190: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 4 OF 6

Patent No. US 8,856,780 CA 2759622 2017-2018 Toyota Prius Prime PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 191: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 5 OF 6

Patent No. US 8,856,780 CA 2759622 2017-2018 Toyota Prius Prime PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 192: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 6 OF 6

Patent No. US 8,856,780 CA 2759622 2017-2018 Toyota Prius Prime PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 193: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2018 TOYOTA PRIUS PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 194: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T008_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

CB

D

PAGE 2 OF 6

Patent No. US 8,856,780 CA 2759622 2016-2018 Toyota Prius PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 195: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

!

3

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

1

1

3

1

2

2

6

5 4 3 2 1

10 9 8 7

T008_W

10 11 12 13 14 15 16

1 2 3 4 5 6 7 8

9

323130292827262524 232221

201918171615141312 1110 9

8 7 6 5 4 3 2 1

1

1

2

54 53 52 51 50 49 48 47 46 45 44 43 42 41

40 39 38 37 36 35 34 33 32 31 30 29 28 27

26 25 24 23 22 21 20 19 18 17 16 15 14

13 12 11 10 9 8 7 6 5 4 3 2 1

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1: BLACK

1: BLACK

1: WHITE

PTS (-) GREEN - 01

STARTER (+) BLACK - 04

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

2: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

OBDII (D)

CANH (DATA) LTBLUE - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) BLACK OR WHITE - 08

LOCK (-) PURPLE - 29

UNLOCK (-) GREEN - 02

PTS SWITCH (A)

HYBRID VEHICLE CONTROL ECU, BEHIND GLOVE BOX (C)HYBRID VEHICLE CONTROL ECU, BEHIND GLOVE BOX (C)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED13 GREEN/RED14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE - STARTER (+) OUTPUT19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

IGNITION (+) PURPLE - 10

12V (+) PURPLE - 16

GROUND (-) WHITE/BLACK - 04

HOOD SWITCH

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 3 OF 6

Patent No. US 8,856,780 CA 2759622 2016-2018 Toyota Prius PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 196: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 4 OF 6

Patent No. US 8,856,780 CA 2759622 2016-2018 Toyota Prius PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 197: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 5 OF 6

Patent No. US 8,856,780 CA 2759622 2016-2018 Toyota Prius PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 198: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 6 OF 6

Patent No. US 8,856,780 CA 2759622 2016-2018 Toyota Prius PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 199: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

Patent No. US 8,856,780 CA 2759622

20181121

REVISION DATE

ADS-RSA-TL7-[HC2352AC]

FIRMWARE

HC2352AC

HARDWARE

ATTENTION: TO COMPLETE THIS INSTALLATION SOME ACCESSORIES MAY BE REQUIRED.

VISIT OUR WEBSITE TO SEE ALL THE REQUIRED ACCESSORIES FOR YOUR VEHICLE.

ACCESSORIES

DOCUMENT NUMBER

2016-2019 TOYOTA TACOMA PTS AT

www.idatalink.comAutomotive Data Solutions Inc. © 2018

INSTALL GUIDE

TERMS OF USEAutomotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.

Page 200: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T005_H

T-HARNESS / COMPONENT LOCATOR - 1 OF 1

A

BC

PAGE 2 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 201: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

4

5

3

1

T005_H

1

3

4

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

NOT REQUIRED FOR BASIC INSTALLATION.INSERT WIRE TERMINALS IN MS3 CONNECTOR FOR OPTIONAL OUTPUTS.REFER TO PRODUCT GUIDE FOR MORE INFORMATION.

T-HARNESS / WIRING DIAGRAM - 1 OF 1

1

1: BODY ECU

M5

M4

M2

M3

0404

03030404

PTS SWITCH (A)

MAIN BODY ECU, DRIVER SIDE DASH (B)

0606

08

010102020303

0505

0707

0909

11111212

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01010202

050506060707080809091010

121213131414151516161717181819192020

0101

04040505

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

1010

HOOD SWITCH

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CONNECT IF VEHICLE IS NOTEQUIPPED WITH OEM HOOD PIN

PTS (-) GRAY - 01

CONNECTION REQUIRED IF IDLE MODE IS DESIRED.

03030202

0606

1111

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

JS4

MS3

MS1

VS3

VS4

JS8

TL6

RED/WHITE•BLACK DOTRED/WHITE•BLACK DOT

GREEN/BLACK•BLACK DOTGREEN/BLACK•BLACK DOTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUTBLUE/WHITE•BLACK DOT - PTS (-) OUTPUT

PURPLEPURPLE

VS1

VS2

MS2

1: BODY ECU HARNESS

NCNC

JS7

TL2/7

JS6

!

2

2

SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.SOME PARTS OF THE T-HARNESS (JS3, JS4 AND JS8-TL6)ARE NOT USED IN THIS INSTALL DO NOT CONNECT THEM.

6

5 4 3 2 1

10 9 8 7

STEERING LOCK (C)

JS1 JS2

1: STEERING LOCK

1: STEERING LOCK HARNESS

JS5

M1

04

010102020303

0505

07070808

0606

!

M3

M1

M2 M5M4

PAGE 3 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 202: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

T005_W

HARDWIRE / COMPONENT LOCATOR - 1 OF 1

A

B

C

PAGE 4 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 203: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

5

!

4

10 11 12 13 14 15 16 17 18

19 20 21 22 23 24 25 26 27 29 30

1 2 3 4 5 6

7 8

29

2

8 9

28

7 6 5 4 3 2 1

1

1

4

1

2

2

2

3

3

6

5 4 3 2 1

10 9 8 7

T005_W

IMPORTANT:1- NO TAKEOVER AVAILABLE. UPON OPENING VEHICLE DOOR ENGINE WILL SHUTDOWN.

2- ALL DOORS MUST BE CLOSED TO REMOTE START VEHICLE.

CUT LOOP FOR AUTOMATIC TRANSMISSION ONLYCUT LOOP FOR AUTOMATIC TRANSMISSION ONLY

HARDWIRE / WIRING DIAGRAM - 1 OF 1

1

1

PTS (-) GRAY - 01

M5

M4

M2

M3

04 GREEN/WHITE•BLACK DOT04 GREEN/WHITE•BLACK DOT

03 BROWN/RED - CANH 103 BROWN/RED - CANH 104 BROWN/YELLOW - CANL 104 BROWN/YELLOW - CANL 1

1: WHITE

MAIN BODY ECU, DRIVER SIDE DASH (B)

STEERING LOCK (C)

CANH (DATA) BLACK - 14

CANL (DATA) WHITE - 13

AUTOLIGHT (-) WHITE - 08

LOCK (-) LtBLUE - 29

UNLOCK (-) GREEN - 02

PTS SWITCH (A)

06 BLUE/WHITE•BLACK DOT06 BLUE/WHITE•BLACK DOT

08 WHITE/PURPLE•BLACK DOT

01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT03 RED/WHITE•BLACK DOT

05 GREEN/BLACK•BLACK DOT05 GREEN/BLACK•BLACK DOT

07 EMPTY07 EMPTY

09 PURPLE/BLACK•BLACK DOT09 PURPLE/BLACK•BLACK DOT

11 BROWN/BLACK•BLACK DOT11 BROWN/BLACK•BLACK DOT12 WHITE•BLACK DOT12 WHITE•BLACK DOT

01 BROWN•SILVER DOT01 BROWN•SILVER DOT02 BLACK/WHITE•SILVER DOT02 BLACK/WHITE•SILVER DOT03 PURPLE•SILVER DOT03 PURPLE•SILVER DOT04 GREEN•SILVER DOT04 GREEN•SILVER DOT05 PURPLE/WHITE•SILVER DOT05 PURPLE/WHITE•SILVER DOT06 WHITE/BLUE•SILVER DOT06 WHITE/BLUE•SILVER DOT

08 BLUE•SILVER DOT08 BLUE•SILVER DOT09 GRAY/BLACK•SILVER DOT09 GRAY/BLACK•SILVER DOT10 EMPTY10 EMPTY

01 EMPTY01 EMPTY02 EMPTY02 EMPTY

05 BLUE/RED05 BLUE/RED06 BLUE/YELLOW06 BLUE/YELLOW07 EMPTY07 EMPTY08 ORANGE08 ORANGE09 YELLOW09 YELLOW10 EMPTY10 EMPTY11 GRAY/RED11 GRAY/RED12 GRAY/YELLOW12 GRAY/YELLOW13 GREEN/RED - SLP (-) OUTPUT13 GREEN/RED - SLP (-) OUTPUT14 ORANGE/WHITE14 ORANGE/WHITE15 BROWN15 BROWN16 ORANGE/BLACK - GROUND (-) INPUT16 ORANGE/BLACK - GROUND (-) INPUT17 PINK - IGNITION (+) IN/OUT17 PINK - IGNITION (+) IN/OUT18 PURPLE18 PURPLE19 RED - 12V (+) INPUT19 RED - 12V (+) INPUT20 BLACK - GROUND (-)20 BLACK - GROUND (-)

01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT01 GRAY/BLACK•BLUE DOT - PTS (-) OUTPUT02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE02 WHITE/BLACK•BLUE DOT - AUTOLIGHT (-) VEHICLE SIDE03 GRAY/RED•BLUE DOT03 GRAY/RED•BLUE DOT04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE04 WHITE/RED•BLUE DOT - AUTOLIGHT (-) CONNECTOR SIDE05 GRAY•BLUE DOT - GROUND (-) INPUT05 GRAY•BLUE DOT - GROUND (-) INPUT06 WHITE•BLUE DOT06 WHITE•BLUE DOT

07 GRAY•SILVER DOT - HOOD (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT

10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - HORN (-) OUTPUT

HORN (-)

SLP (-) TAN - 04

IGNITION (+) BLACK - 06

12V (+) RED - 07

HOOD SWITCH

1

INSTALL THE SUPPLIED HOOD SWITCH IF THE VEHICLEIS NOT EQUIPPED WITH ONE.

WITHOUT OEM HOOD STATUS ONLY

CONNECTION REQUIRED ONLY IF IDLE MODE IS DESIRED

OPTIONAL CONNECTIONS:-IF CONNECTED, OEM AND AFTERMARKET REMOTES

WILL ALWAYS BE SYNCHRONIZED.-IF NOT CONNECTED, USER MUST LOCK VEHICLE DOORS USING

OEM REMOTE OR DOOR REQUEST SWITCH AFTER OPERATINGVEHICLE, EVERY TIME.

FOR MORE INFORMATION, READ "WARNING: DOOR LOCKSYNCHRONIZATION".

M1

04 PINK/WHITE

01 ORANGE01 ORANGE02 RED02 RED03 PURPLE03 PURPLE

05 PINK05 PINK

07 RED07 RED08 BLACK08 BLACK

06 WHITE06 WHITE

!

M3

M1

M2 M5M4

PAGE 5 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 204: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

01

ENGINE

START

STOP

STOP ACC ON STARTON

02

03

ENGINE

START

STOP

STOP ACC ON STARTSTOP

04

05

ENGINE

START

STOP

STOP ACC ON STARTON

06

07

ENGINE

START

STOP

STOP ACC ON STARTSTOP

08

ENGINE

START

STOP

STOP ACC ON STARTSTART

09

10

11

12

13

MODULE PROGRAMMING PROCEDURE - 1 OF 1

Push start button twice [2x] to ON position.

Wait, if LED 1 turns solid GREEN for 2 seconds, proceed to step 7. If LED 1 flashes GREEN rapidly, proceed to step 3.

Push start button once [1x] to OFF position.

Wait, LED 1 will turn solid RED. (This may take up to 5 minutes.)

Push start button twice [2x] to ON position.

Wait, LED 1 will turn solid GREEN for 2 seconds.

Push start button once [1x] to OFF position.

START vehicle for 15 seconds.

Press and hold the brake pedal.

Press and release the module’s programming button.

Release the brake pedal.

Wait, LED 2 will flash GREEN.

Module Programming Procedure completed.

PAGE 6 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 205: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 1 OF 2

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press the LOCK button once [1x] on the aftermarket keyfob.

Question 1: Do the doors lock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

4 Press the UNLOCK button once [1x] on the aftermarket keyfob.

Question 2: Do the doors unlock?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and the wired door lock/unlock connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

5 Press the TRUNK release button once [1x] on the aftermarket keyfob if supported.

Question 3: Does the trunk or hatch open/unlock?

YES: Close trunk or hatch and go to next step.

NO: Verify the remote programming, the RF connections and the wired trunk/hatch connections as illustrated in the wiring diagram, if applicable. Repeat the test and call technical support, if the problem persists.

6 Press the AUX 1 button once [1x] on the aftermarket keyfob if supported.

Question 4: Does the driver side sliding door open?

YES: Press the AUX 1 button once [1x] to close the driver sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

7 Press the AUX 2 button once [1x] on the aftermarket keyfob if supported.

Question 5: Does the passenger side sliding door open?

YES: Press the AUX 2 button once [1x] to close the passenger sliding door and go to next step.

NO: Verify the remote programming and the RF connections. Repeat the test and call technical support, if the problem persists.

8 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 6: Does the vehicle remote start?

YES: Go to next step.

NO: Verify the remote programming, the RF connections and check the remote start error codes. Repeat the test and call technical support, if the problem persists.

9 Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle.

Question 7: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If problem persists, press the brake pedal once [1x] to shut down the vehicle and call technical support.

10 RAP and auto light shutdown test

Question 8: Did the radio, interior controls and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support if the problem persists.

11 Open hood.

12If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

13 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

Question 9: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

14 Close hood.

15 Enter vehicle and close the doors.

16 Press the START/STOP button once [1x] on the aftermarket keyfob to remote start vehicle.

17 Wait for the vehicle to start.

18 Press brake pedal.

Question 10: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press the START/STOP button once [1x] on the aftermarket keyfob to shut down vehicle, check connection as illustrated in the wiring diagram, if applicable, and call technical support.

19 Exit vehicle.

20 Installation checklist completed.

CHECKLIST - WITH AFTERMARKET KEYFOB

PAGE 7 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121

Page 206: INSTALL GUIDEimages.idatalink.com/corporate/Content/Manuals/RSA-TL7...2018/11/22  · Press and hold the brake pedal. Press and release the module’s programming button. Release the

INSTALLATION CHECKLIST - 2 OF 2

CHECKLIST - WITH OEM KEYFOB

1 WARNING: Vehicle engine will start many times. Test in a well ventilated area.

2 Close all vehicle doors, hood and trunk.

3 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 1: Does the vehicle remote start?

YES: Go to next step.

NO: The module doesn't detect OEM remote lock button from the vehicle communication network. Check all connections, repeat the test and call technical support, if the problem persists.

4 Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down vehicle.

Question 2: Does the vehicle shut down?

YES: Go to next step.

NO: Repeat step. If the problem persists, press on the brake pedal once [1x] to shut down the vehicle and call technical support.

5 RAP Shutdown test

Question 3: Did the radio, interior controls, and headlights turn off within 60 seconds after remote start shutdown?

YES: Go to next step.

NO: Verify the RAP SHUTDOWN connections as illustrated in the wiring diagram. Repeat the test and call technical support, if the problem persists.

6 Open hood.

7 If not already installed, affix the mandatory orange warning sticker under the hood and proceed to next step.

8 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

Question 4: Does the vehicle remote start?

YES: The vehicle is not equipped with a factory hood pin. Install a mandatory aftermarket hood switch, then repeat the test.

NO: Go to next step.

9 Close hood.

10 Enter vehicle and close the doors.

11 Press LOCK button three times [3x] rapidly on the OEM keyfob to remote start vehicle.

12 Wait for the vehicle to start.

13 Press brake pedal.

Question 5: Does the vehicle shut down?

YES: Go to next step.

NO: The module does NOT detect the brake pedal signal. Press LOCK button three times [3x] rapidly on the OEM keyfob to shut down, check the brake connection as illustrated in the wiring diagram, if applicable, and call technical support.

14 Exit vehicle.

15 Installation checklist completed.

PAGE 8 OF 8

Patent No. US 8,856,780 CA 2759622 2016-2019 Toyota Tacoma PTS AT www.idatalink.comAutomotive Data Solutions Inc. © 2018 ADS-RSA-TL7-[HC2352AC]-EN

20181121