Upload
crazydocs
View
79
Download
2
Embed Size (px)
DESCRIPTION
Inspection Tools E-Catalog
Citation preview
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 1 of 8
HEAD OFFICE : 1396, JALAN MAWAR 24, TAMAN PERMIN JAYA, CHENDERING, 21080,KUALA TERENGGANU, TERENGGANU, MALAYSIA. TEL: 012-9601579 EMAIL: [email protected]
CATALOG
No Inspection Tool Description Price(RM)
1
CAM TYPE WELDING GAUGE
Angle of preparation, 00 to 600
Excess weld metal (capping size)
Depth of undercut
Depth of pitting
Fillet weld throat size
Fillet weld leg length
Misalignment ( high - low )
200.00
2
ECONOMY SINGLE PURPOSE HI-LO WELDING GAUGE
Checking the internal alignment of the fit-up quickly with the HI-LO gauge
Easy operation determines root gap
Available in standard or metric
250.00
3
HI-LO WELDING GAUGE
Measurements read in standard on one side & metric on opposite side.
Measures internal alignment of pipe after fit-up/alignment and cuts radiographic rejects.
Measure internal misalignment of pipe before and after tacking
This handy devise even measures scribe lines, socket welds, crown height of welds & fillet weld size.
180.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 2 of 8
No Inspection Tool Description Price(RM)
4
TELESCOPIC INSPECTION MIRROR
50mm mirror diameter
Extent to 400mm
High quality of mirror material
20.00
5
STANLEY MEASUREMENT TAPE
8m / 26' length
High quality material
Heavy duty
Casing cover with rubber
Corrosion resistance tape
80.00
6
CONTOUR PROFILE GAUGE
125mm length
Stainless steel material.
Accurate to measure multi shape
100.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 3 of 8
No Inspection Tool Description Price(RM)
7
V-WAC WELD GAUGE
Undercut depth or crown height scale can be read to 1/32"
Porosity comparison of 1/8" & 1/16".
Figures and increments are etched into surface. They are easy to read and will not rub off.
Gauge is made of stainless steel
Gauge is 1 1/4" by 4", and can be easily carried in your pocket
180.00
8
TAPER GAUGE
1mm to 15mm scale
High quality material
Measure root gap
Measure hole diameter
90.00
9
PELICAN TORCH LIGHT
Bulb torch light
Explosion proof
Heavy duty
High quality material
250.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 4 of 8
No Inspection Tool Description Price(RM)
10
TELESCOPIC INSPECTION MIRROR
25mm mirror diameter
Comes with pick-up magnet
High quality mirror material
Extent to 480mm
With pocket clip
20.00
11
TEMPILSTIK
Measure accurate temperature
Fast indication
Various rate temperature
60.00
12
VENIER CALIPER
Measure outside diameter
Measure internal diameter
150mm length
Accurate measurement
Stainless steel
130.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 5 of 8
No Inspection Tool Description Price(RM)
13
STEEL RULE (FINE SCALE)
Have fine scale section
Stainless steel
High quality material
150mm
7.00
14
2 PIECES FILLET WELD GAUGE
The Fillet Weld Gauge allows fast, and accurate measurement.
To determine weld sizes, either concave or convex.
Each gauge blade is made from stainless steel to resist rust and bending.
All sizes and numerals are engraved into the surface for easier reading.
90.00
15
4 PIECES FILLET WELD GAUGE
The Fillet Weld Gauge allows fast, and accurate measurement.
To determine weld sizes, either concave or convex.
Each gauge blade is made from stainless steel to resist rust and bending.
All sizes and numerals are engraved into the surface for easier reading.
150.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 6 of 8
No Inspection Tool Description Price(RM)
16
7 PIECES FILLET WELD GAUGE 001
The Fillet Weld Gauge allows fast, and accurate measurement.
To determine weld sizes, either concave or convex.
Each gauge blade is made from stainless steel to resist rust and bending.
All sizes and numerals are engraved into the surface for easier reading.
180.00
17
7 PIECES FILLET WELD GAUGE 002
The Fillet Weld Gauge allows fast, and accurate measurement.
To determine weld sizes, either concave or convex.
Each gauge blade is made from stainless steel to resist rust and bending.
All sizes and numerals are engraved into the surface for easier reading.
180.00
18
AUTOMATIC WELD SIZE GAUGE
It is possible to meet specifications of butt and fillet type welds.
New redesigned instrument is pocket sized and easy to operate.
The convexity and concavity sizes have automatically been predetermined.
Instrument is precision built of stainless steel with dimensional reading chemically etched and filled for easier reading
180.00
19
DIGITAL WELDING SEAM GAUGE
Resolution 0.01 mm
Complete with spare battery
Simple reset and with a mm/inch button to switch from mm to inch
The welding gauge can be connected to a printer for data-output by means of a special data-cable.( Data cable not included)
250.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 7 of 8
No Inspection Tool Description Price(RM)
20
FAN SHAPE GAUGE
Special designed gauge
To measure fillet weld size at limited space
Formula and scale engrave on gauge for easier reading.
Made from stainless steel
200.00
21
PIPE PIT GAUGE
Range is 0 to 1/2" in 1/64" & 0.020 increments
All stainless steel
Gauge will fit in shirt pocket & comes in a soft case
Has handy formulas on front & decimal equivalents on back
200.00
22
SKEW-T FILLET WELD GAUGE
A handy compilation of mathematical relationships between leg length, throats, skew angles and inspection dimension.
The perfect companion to the Skew-T Fillet Weld Gauge. (Gauge measures in inch & metric)
Checking angle of vertical member
Checking weld acute side
Checking weld obtuse side
250.00
ENGINEERING INSPECTION SERVICES
SMOIZ ENTERPRISE (Company No. SA0144050-V)
Page 8 of 8
No Inspection Tool Description Price(RM)
23
WELDING SEAM GAUGE
To measure flat welding seams and welding seams in corners
Graduation : metric 0.1mm, inch 1/128"
With angle gages 600, 700, 800 and 900
Made of stainless steel, stain chrome plated reading surface
Packed in pouch or hard case
180.00
24
WELDING GAUGE
Three components : main scale, glide gauge and multiple-purpose gauge.
Use to measure bevel angle, height capping , and root gap.
200.00
Our others services :
Supply Manpower
Supply Welding Equipment
Supply PPE
Fabrication Works
Welding Works
Mechanical Works If you have inquiry, please do not hesitate to contact us at 012-9601579 or @facebook ---> http://www.facebook.com/SMOIZent