Upload
lycong
View
216
Download
1
Embed Size (px)
Citation preview
medicine
KITO CHAIN SLING 100
Strictly Avoid OverloadingKito Chain Sling 100 products have Kito Sling Tags attached. Be sure to use the product within the range of the working load limits displayed on the Kito Sling Tag. (Refer to page 3.)
Changes in the Working Load Limit according to the Angle of Loading
The working load limits will change according to the angle of loading. Be certain to confirm the actual angle of loading with the angle of loading and working load limits described on the Kito Safety Tag.
Minimizing the Impact Loading Impact loading will lead to unexpected overloading. Take particular care to avoid shock when the loads are lifted off and returned to the ground.
Measures when Loads have Sharp Edges For loads that have sharper edges, an increasingly unreasonable force will be applied to the chain slings, affecting their strength. Apply pads to protect the load and chains, and use chains considering the safety factor margin.
Chain Twisting and TanglingVerify that the chain is not twisted, tangled, or tangled with the sling components prior to use.
When the Load is Out of BalanceSuspend loads in such a way that the loading is applied equally to all the chain slings. In cases where the form of the load makes it difficult to suspend with equal loading on each chain, select the slings while considering the chain side that bears the heaviest load as the reference.
Apply Loads to the Center of the HookBe certain to suspend the load from the center of the hook (deepest part). Avoid suspending loads from the hook tip.
Variations in Working Load Limits under High Temperatures
In the situation of using chain slings in high temperature environments, or in cases where chain slings are used under normal temperatures after they have been used in high temperature environments, the working load limits should be reduced according to the corresponding temperature in the table below.
Resistance to ChemicalsThese products cannot be used in environments that are subject to chemicals.
Leaving Loads in a Suspended Condition
Do not leave loads in a suspended condition for long periods.
Reductions in the Working Load Limits
To allow safe use of chain slings, when using under the following conditions the working load limits should be reduced to 80% or less of the values given in the working load limit list.(1) Work that is carried out with high frequency or when the working load is applied continuously(2) Work in which vibration is applied continuously(3) Usage by incorporation in an automatic line
Chain Sling Usage Limits Observe the usage limitations due to wear and elongation, and do not use products that have become deformed or cracked.
BULLETIN NO. CSGE1508-05
1
Supporting ideal lifting work with outstanding quality
Printed in japan 30.01(SE.H)CSGE05-011
Distributed by:
•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •In case you intend to use our products for special purposes, consult us in advance.•In case you intend to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.
KITO CORPORATIONSHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com
1 8
9
10
11
12
2
3
4
5
6
7
Precautions for Use Recommendationsfor Correct Equipment
Administration
Inspection is the first step of safety.
In order to use the equipment
safety, carry out the daily
inspections, monthly inspections
and periodic inspections.
Daily and Periodic InspectionsDaily inspections should be implemented by the operator before using the chain slings for work. In addition, periodic inspections should be implemented by the persons determined by the business entity.
Chain Sling StorageStore chain slings in appropriate locations under favorable environments where they will not rust.
Chain Sling Record AdministrationThe administration of inspection records is important for the safe use of chain slings.
Kito has prepared a “Periodic Inspection Standards Manual” which describes the inspection standards and periodic inspection check sheets.
•This catalog is intended to allow the use of Kito Chain Sling 100 products at working load limits with a safety factor of 5:1.
•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another
1
2
3
Working load limit (%)Temperature, t (°C)
-40 < t ≤ 100100 < t ≤ 260200 < t ≤ 300300 < t ≤ 350350 < t ≤ 400
Over 400
10090756560
Usage not allowed
2
600
500
400
300
200
100
5Chaindiameter (mm)
BreakingForce
(kN)
10 15 20
Grade 10
Grade 8
Grade 6
KITO CHAIN SLING 100
EN, ISO
ASME, ASTM, NACM, JIS
•Kito Sling Tag •Contents
Index
Every Kito Chain Sling 100 product has a Kito Sling Tag attached.The Kito Sling Tag is an important item for carrying out safe work,so be sure to confirm that the tag is attached to the product before starting work.
For Single Leg Sling
For Double/ Triple/ Quardruple Leg Sling
Front Back
The following important information is described on the Kito Sling Tag.
Method of Lifting and
Working Load Limits
Manufacture Date
ChainDiameter
ManagementNumber
(Optional)
Kito Link Chain Grade 10 Achieves the World’s Strongest Level•This is the world’s strongest link chain with a breaking
stress of 1000 N/mm2 or more which was developed
based on Kito’s many years of accumulated technology
and experience.
•Using a carefully manufactured special alloy steel as
the material, the chain links are formed and welded by
completely automated machines, before undergoing
quenching and tempering using special automatic heat
treatment equipment.
•Tension test is implemented on all lots to ensure that
all products maintain the breaking stress of 1000
N/mm2 or more.
•These chain manufacturing technologies, unrivaled
anywhere in the world, create the high level of link chain
strength.
Wide Range of Variations allow Selection of the Optimum Combination for Any Application•Standard link chains are provided in various diameters
from Ø6.0 mm to Ø20.0 mm to support work lifting
heavy and large-sized objects. The link chain and fitting
combinations offer clevis-type products with exclusive
retaining pins, and eye-type products which use
Hicouplings.
•Since a wide range of fittings are also available, it is
possible to freely select from among single leg, double
leg, triple leg, quadruple leg, and endless types to
match the usage purpose.
High Product Quality realizes Safe and Highly Efficient Work•All Kito Chain Sling 100 products have a safety factor
of 5:1.
•Due to the inspections carried out in each
manufacturing process, link chains with high
dimensional accuracy are being manufactured.
•Fittings are forged from specially selected alloy steel
that undergoes quenching and tempering to realize high
strength and outstanding wear resistance.
•All products have a Kito Safety Tag attached. These
tags enable promotion of even safer work.
•Link chains offer great freedom of usage, so that
simple, speedy, and secure lifting work can be realized
by combining them with appropriate fittings.
Advanced Chain Manufacturing Technologies realize Outstanding Ultimate Elongation•Kito link chains have both a high breaking stress and
toughness due to the advanced chain manufacturing
technologies that are utilized. The factor that verifies
this is the numerical value known as the ultimate
elongation which achieves a value of 20% or more. In
addition, concerning the strength in the link bending
direction, the use of advanced welding technology gives
the links sufficient absorbability as shown by the
photograph (at bottom right) of the result of bending
test according to ISO 1834, and no
breakage or cracking occurs.
(However, this does not indicate that
the product should be used until it
reaches the condition shown in the
photograph.)
Achievement of Outstanding Economic Efficiency due to the High Wear Resistance•Regarding wear due to the chain linking, Kito’s unique
heat treatment technology exhibits its true worth so that
the wear factor of the link chains has become extremely
small. This enables the link chains to also sufficiently
withstand long-period use, realizing excellent economic
efficiency.
Kito Sling Tag
Linking the load to the crane, Kito Chain Sling 100 products prove their worth in the locations closest to the operator
Since its establishment in 1932, Kito has aimed
to create products that are safe and easy to operate.
Kito gives its primary consideration to safety
•Product Features
•Kito Sling Tag
•Link Chain Specification Table
•Selection Procedure
•Method of Lifting and Working Load Limits
Fittings Components
•Selection Table of kit of Pin for clevis hook
Fittings Components Clevis Type
Fittings Components Eye Type
Standard Sling Types
•Kito Standard Sling Types [Way to Read The Code]
Standard Sling Types Clevis Type SCP2
Standard Sling Types Eye Type SCE2
Standard Sling Types Eye Type SCE2 (HMS)
•Constituent Components Reference Example
•Large Master Link HL/HLD
•Example
•Reference Examples of Special Specification Systems
•Introduction to High Versatility Balance Beams
2
3
4
4
5
6
7
8
10
12
13
14
16
18
19
20
24
25
26
•Kito will also design and manufacture chain slings and accessories other than the standard products in response to user requests. Please feel free to contact your Kito dealer for more information.
Be certain to use the sling within the range of the working load limits that are indicated on the tag. The working load limits and angles of loading are inscribed based on the “Method of Lifting and working Load Limits” on page 5.
Because a space is prepared on the tag so that customers can write an optional administration number, please use this for your product safety administration.
CHAIN SLINGWARNING
・ALWAYS read owner’s manual.・NEVER lift more than WLL.
3
600
500
400
300
200
100
5Chaindiameter (mm)
BreakingForce
(kN)
10 15 20
Grade 10
Grade 8
Grade 6
KITO CHAIN SLING 100
EN, ISO
ASME, ASTM, NACM, JIS
•Kito Sling Tag •Contents
Index
Every Kito Chain Sling 100 product has a Kito Sling Tag attached.The Kito Sling Tag is an important item for carrying out safe work,so be sure to confirm that the tag is attached to the product before starting work.
For Single Leg Sling
For Double/ Triple/ Quardruple Leg Sling
Front Back
The following important information is described on the Kito Sling Tag.
Method of Lifting and
Working Load Limits
Manufacture Date
ChainDiameter
ManagementNumber
(Optional)
Kito Link Chain Grade 10 Achieves the World’s Strongest Level•This is the world’s strongest link chain with a breaking
stress of 1000 N/mm2 or more which was developed
based on Kito’s many years of accumulated technology
and experience.
•Using a carefully manufactured special alloy steel as
the material, the chain links are formed and welded by
completely automated machines, before undergoing
quenching and tempering using special automatic heat
treatment equipment.
•Tension test is implemented on all lots to ensure that
all products maintain the breaking stress of 1000
N/mm2 or more.
•These chain manufacturing technologies, unrivaled
anywhere in the world, create the high level of link chain
strength.
Wide Range of Variations allow Selection of the Optimum Combination for Any Application•Standard link chains are provided in various diameters
from Ø6.0 mm to Ø20.0 mm to support work lifting
heavy and large-sized objects. The link chain and fitting
combinations offer clevis-type products with exclusive
retaining pins, and eye-type products which use
Hicouplings.
•Since a wide range of fittings are also available, it is
possible to freely select from among single leg, double
leg, triple leg, quadruple leg, and endless types to
match the usage purpose.
High Product Quality realizes Safe and Highly Efficient Work•All Kito Chain Sling 100 products have a safety factor
of 5:1.
•Due to the inspections carried out in each
manufacturing process, link chains with high
dimensional accuracy are being manufactured.
•Fittings are forged from specially selected alloy steel
that undergoes quenching and tempering to realize high
strength and outstanding wear resistance.
•All products have a Kito Safety Tag attached. These
tags enable promotion of even safer work.
•Link chains offer great freedom of usage, so that
simple, speedy, and secure lifting work can be realized
by combining them with appropriate fittings.
Advanced Chain Manufacturing Technologies realize Outstanding Ultimate Elongation•Kito link chains have both a high breaking stress and
toughness due to the advanced chain manufacturing
technologies that are utilized. The factor that verifies
this is the numerical value known as the ultimate
elongation which achieves a value of 20% or more. In
addition, concerning the strength in the link bending
direction, the use of advanced welding technology gives
the links sufficient absorbability as shown by the
photograph (at bottom right) of the result of bending
test according to ISO 1834, and no
breakage or cracking occurs.
(However, this does not indicate that
the product should be used until it
reaches the condition shown in the
photograph.)
Achievement of Outstanding Economic Efficiency due to the High Wear Resistance•Regarding wear due to the chain linking, Kito’s unique
heat treatment technology exhibits its true worth so that
the wear factor of the link chains has become extremely
small. This enables the link chains to also sufficiently
withstand long-period use, realizing excellent economic
efficiency.
Kito Sling Tag
Linking the load to the crane, Kito Chain Sling 100 products prove their worth in the locations closest to the operator
Since its establishment in 1932, Kito has aimed
to create products that are safe and easy to operate.
Kito gives its primary consideration to safety
•Product Features
•Kito Sling Tag
•Link Chain Specification Table
•Selection Procedure
•Method of Lifting and Working Load Limits
Fittings Components
•Selection Table of kit of Pin for clevis hook
Fittings Components Clevis Type
Fittings Components Eye Type
Standard Sling Types
•Kito Standard Sling Types [Way to Read The Code]
Standard Sling Types Clevis Type SCP2
Standard Sling Types Eye Type SCE2
Standard Sling Types Eye Type SCE2 (HMS)
•Constituent Components Reference Example
•Large Master Link HL/HLD
•Example
•Reference Examples of Special Specification Systems
•Introduction to High Versatility Balance Beams
2
3
4
4
5
6
7
8
10
12
13
14
16
18
19
20
24
25
26
•Kito will also design and manufacture chain slings and accessories other than the standard products in response to user requests. Please feel free to contact your Kito dealer for more information.
Be certain to use the sling within the range of the working load limits that are indicated on the tag. The working load limits and angles of loading are inscribed based on the “Method of Lifting and working Load Limits” on page 5.
Because a space is prepared on the tag so that customers can write an optional administration number, please use this for your product safety administration.
CHAIN SLINGWARNING
・ALWAYS read owner’s manual.・NEVER lift more than WLL.
4
p
bwd R
•Link Chain Specification Table •Ordering Procedure
Link Chain Specification Table
Selection Procedure
Chain Diameterd
(mm)Code
Pitchp
(mm)
MaximumOutside Width
bw (mm)
W.L.L.(Working Load Limit)
(t)
BreakingForce(kN)
Mass (Weight)per Meter
(kg)
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
SV2060
SV2070
SV2080
SV2100
SV2130
SV2160
SV2200
18.0
21.0
24.0
30.0
39.0
48.0
60.0
22.2
25.9
29.6
37.0
48.1
59.2
74.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
56.5
77
101
160
268
402
630
0.8
1.1
1.4
2.2
3.8
5.85
9.5
SV
•Method of Lifting and Working Load Limits
1. Work that is carried out with high frequency or when the working load is applied continuously
2. Work in which vibration is applied continuously
3. Usage by incorporation in an automatic line
Reductions in the Working Load Limits
In order to use products safely over a long period, when using products under the conditions described at below, the working load limits should be reduced to 80% and the appropriate slings should be selected.
Apply a pad to a sharp edge of the load when wrapping the chain around the edge with a radius smaller than the chain diameter. Reduce the working load limit to 70% of the value shown.
Sling Type Selection Number of legs, fittings, slinging methods
Clevis type or eye type
Confirming the working load limits according to the slinging method (Refer to the right side page.)
Determination of the reach (Calculation of the angle of loading ß)
Determination of the chain diameter
SelectionExample
1
SelectionExample
2
Set Product ClassificationTop Fitting Type
L DimensionChain Diameter
Bottom Fitting Type
Q - VD-VSS•6.0mm-1.0m
D-HM-OO•13mm-2.7m
In the situation where two-set slinging is necessary, calculation should be carried out assuming that half of the suspended load weight will be applied to the chain sling. In this situation, it will be important to take care that equal loading is applied to the two sets.
1 Set
2 Set
Regarding the Code, refer to “Kito Standard Sling Types [Way to Read The Code]” on page 13.
•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For slinging methods that do not have a “*” mark, no load reduction will be required. •The red-colored numerical values in the tables are exclusive values for “When using the Large Master Link HL/HLD” and “When using the Master Link HMS with Sub Links” respectively.
In basket hitch slinging, because the angle of loading will change according to the dimensions of the load, before use be certain to confirm the angle of loading and use the products within the range of the working load limits.
In the case of the selection example 2, both slings must be loaded equally.
What is the form of the suspended load?
What is the weight of the suspended load?
Load form = Box pallet•Clevis type•Quadruple leg slings with sling hooks (with hook latches)
Weight = 2t•Reach: L 1 m•The W.L.L. is 2.1 t at θ = 90° for 6 mm
Load form = H-beams (400 x 400)Lifting of 4 beams together•Eye type•Endless sling 2 sets
Total Weight = 7tWeight that can be supported by one sling set: 3.5 t•Reach: L 2.7 m•The W.L.L is 4.0 t (5.7 t × 70 % to account for the sharp edge) at θ = 60° for 13mm
L
When Using the Large Master Link HL/HLD
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.7
2.4
3.2
5.1
8.0
12.5
20.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
2.4
3.2
5.0
8.0
12.5
20.0
32.0
2.1
2.8
4.0
6.4
10.4
16.0
25.0
1.5
2.0
2.8
4.5
7.3
11.2
18.0
1.7
2.4
3.2
5.1
8.0
12.5
20.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.2
1.6
2.2
3.6
5.7
9.0
14.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
2.4
3.2
5.0
8.0
12.5
20.0
32.0
2.1
2.8
4.0
6.4
10.4
16.0
25.0
1.5
2.0
2.8
4.5
7.3
11.2
18.0
1.8
2.5
3.6
5.6
9.0
14.0
22.4
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.2
1.6
2.2
3.6
5.7
9.0
14.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
- 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° --
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
SingleLeg
DoubleLegs
Slinging Method
Angle of Loading θChain Diameter
(mm) Working Lord Limit (t)
Triple andQuadruple Legs Double Legs
Endless Choke Hitch
Quadruple Legs Single Leg Double Legs Double ChokeHitch
Note that in the case of using the Large Master Link HL/HLD or the Master Link HMS,the “Slinging Methods and W.L.L. (Working Load Limits)” will be different.
Please refer to the appropriate tables and use the product within the range of the working load limits.
1.1
1.5
2.0
3.2
5.0
8.0
11.5
1.7
2.0
3.2
5.0
8.0
11.5
-
1.5
2.0
2.8
4.5
7.3
11.2
-
1.1
1.5
2.0
3.2
5.2
8.0
-
2.0
3.2
5.0
8.0
11.5
--
2.0
2.8
4.0
6.4
10.4
--
1.5
2.0
2.8
4.5
7.3
--
1.7
2.0
3.2
5.0
8.0
11.5
-
1.5
2.0
2.8
4.5
7.3
11.2
-
1.1
1.5
2.0
3.2
5.2
8.0
-
1.2
1.6
2.2
3.6
5.7
9.0
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
-
2.0
3.2
5.0
8.0
11.5
--
2.0
2.8
4.0
6.4
10.4
--
1.5
2.0
2.8
4.5
7.3
--
1.8
2.5
3.6
5.6
9.0
--
1.5
2.1
2.8
4.5
7.3
--
1.1
1.5
2.0
3.2
5.2
--
1.2
1.6
2.2
3.6
5.7
9.0
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
9.0
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
When Using Master Link HMS
- - - -
2.6
3.2
4.2
6.4
10.4
16.0
25.0
2.2
3.0
4.0
6.4
10.4
16.0
25.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
- - - - - -
2.6
3.2
4.2
6.4
10.4
16.0
25.0
2.2
3.0
4.0
6.4
10.4
16.0
25.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.8
2.5
3.6
5.6
9.0
14.0
22.4
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
- - - --
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
θ
θ
Sharp edge
5
p
bwd R
•Link Chain Specification Table •Ordering Procedure
Link Chain Specification Table
Selection Procedure
Chain Diameterd
(mm)Code
Pitchp
(mm)
MaximumOutside Width
bw (mm)
W.L.L.(Working Load Limit)
(t)
BreakingForce(kN)
Mass (Weight)per Meter
(kg)
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
SV2060
SV2070
SV2080
SV2100
SV2130
SV2160
SV2200
18.0
21.0
24.0
30.0
39.0
48.0
60.0
22.2
25.9
29.6
37.0
48.1
59.2
74.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
56.5
77
101
160
268
402
630
0.8
1.1
1.4
2.2
3.8
5.85
9.5
SV
•Method of Lifting and Working Load Limits
1. Work that is carried out with high frequency or when the working load is applied continuously
2. Work in which vibration is applied continuously
3. Usage by incorporation in an automatic line
Reductions in the Working Load Limits
In order to use products safely over a long period, when using products under the conditions described at below, the working load limits should be reduced to 80% and the appropriate slings should be selected.
Apply a pad to a sharp edge of the load when wrapping the chain around the edge with a radius smaller than the chain diameter. Reduce the working load limit to 70% of the value shown.
Sling Type Selection Number of legs, fittings, slinging methods
Clevis type or eye type
Confirming the working load limits according to the slinging method (Refer to the right side page.)
Determination of the reach (Calculation of the angle of loading ß)
Determination of the chain diameter
SelectionExample
1
SelectionExample
2
Set Product ClassificationTop Fitting Type
L DimensionChain Diameter
Bottom Fitting Type
Q - VD-VSS•6.0mm-1.0m
D-HM-OO•13mm-2.7m
In the situation where two-set slinging is necessary, calculation should be carried out assuming that half of the suspended load weight will be applied to the chain sling. In this situation, it will be important to take care that equal loading is applied to the two sets.
1 Set
2 Set
Regarding the Code, refer to “Kito Standard Sling Types [Way to Read The Code]” on page 13.
•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For slinging methods that do not have a “*” mark, no load reduction will be required. •The red-colored numerical values in the tables are exclusive values for “When using the Large Master Link HL/HLD” and “When using the Master Link HMS with Sub Links” respectively.
In basket hitch slinging, because the angle of loading will change according to the dimensions of the load, before use be certain to confirm the angle of loading and use the products within the range of the working load limits.
In the case of the selection example 2, both slings must be loaded equally.
What is the form of the suspended load?
What is the weight of the suspended load?
Load form = Box pallet•Clevis type•Quadruple leg slings with sling hooks (with hook latches)
Weight = 2t•Reach: L 1 m•The W.L.L. is 2.1 t at θ = 90° for 6 mm
Load form = H-beams (400 x 400)Lifting of 4 beams together•Eye type•Endless sling 2 sets
Total Weight = 7tWeight that can be supported by one sling set: 3.5 t•Reach: L 2.7 m•The W.L.L is 4.0 t (5.7 t × 70 % to account for the sharp edge) at θ = 60° for 13mm
L
When Using the Large Master Link HL/HLD
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.7
2.4
3.2
5.1
8.0
12.5
20.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
2.4
3.2
5.0
8.0
12.5
20.0
32.0
2.1
2.8
4.0
6.4
10.4
16.0
25.0
1.5
2.0
2.8
4.5
7.3
11.2
18.0
1.7
2.4
3.2
5.1
8.0
12.5
20.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.2
1.6
2.2
3.6
5.7
9.0
14.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
2.4
3.2
5.0
8.0
12.5
20.0
32.0
2.1
2.8
4.0
6.4
10.4
16.0
25.0
1.5
2.0
2.8
4.5
7.3
11.2
18.0
1.8
2.5
3.6
5.6
9.0
14.0
22.4
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
1.2
1.6
2.2
3.6
5.7
9.0
14.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
0.7
1.0
1.4
2.2
3.6
5.6
9.0
- 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° 60° 90° 120° --
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
SingleLeg
DoubleLegs
Slinging Method
Angle of Loading θChain Diameter
(mm) Working Lord Limit (t)
Triple andQuadruple Legs Double Legs
Endless Choke Hitch
Quadruple Legs Single Leg Double Legs Double ChokeHitch
Note that in the case of using the Large Master Link HL/HLD or the Master Link HMS,the “Slinging Methods and W.L.L. (Working Load Limits)” will be different.
Please refer to the appropriate tables and use the product within the range of the working load limits.
1.1
1.5
2.0
3.2
5.0
8.0
11.5
1.7
2.0
3.2
5.0
8.0
11.5
-
1.5
2.0
2.8
4.5
7.3
11.2
-
1.1
1.5
2.0
3.2
5.2
8.0
-
2.0
3.2
5.0
8.0
11.5
--
2.0
2.8
4.0
6.4
10.4
--
1.5
2.0
2.8
4.5
7.3
--
1.7
2.0
3.2
5.0
8.0
11.5
-
1.5
2.0
2.8
4.5
7.3
11.2
-
1.1
1.5
2.0
3.2
5.2
8.0
-
1.2
1.6
2.2
3.6
5.7
9.0
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
-
2.0
3.2
5.0
8.0
11.5
--
2.0
2.8
4.0
6.4
10.4
--
1.5
2.0
2.8
4.5
7.3
--
1.8
2.5
3.6
5.6
9.0
--
1.5
2.1
2.8
4.5
7.3
--
1.1
1.5
2.0
3.2
5.2
--
1.2
1.6
2.2
3.6
5.7
9.0
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
-
1.1
1.5
2.0
3.2
5.2
8.0
-
0.7
1.0
1.4
2.2
3.6
5.6
9.0
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
When Using Master Link HMS
- - - -
2.6
3.2
4.2
6.4
10.4
16.0
25.0
2.2
3.0
4.0
6.4
10.4
16.0
25.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
- - - - - -
2.6
3.2
4.2
6.4
10.4
16.0
25.0
2.2
3.0
4.0
6.4
10.4
16.0
25.0
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.8
2.5
3.6
5.6
9.0
14.0
22.4
1.5
2.1
2.8
4.5
7.3
11.2
18.0
1.1
1.5
2.0
3.2
5.2
8.0
12.5
- - - --
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
θ
θ
Sharp edge
6
•Selection Table of kit of Pin for clevis hook
ChainDiameter
(mm)Code Chain Pin
D1 x L1Spring Pin
d2 x l2 Applicable Fittings
VP2060
VP2060B
VP2060K
VP2070
VP2070K
VP2080
VP2080K
VP2100
VP2100F
VP2100K
VP2100B
VP2130
VP2130F
VP2130K
VP2130B
VP2160
VP2160F
VP2160K
VP2160B
VP2200
VP2200K
VP2250
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
(ø20.0)
ø3x16
ø2.5X16
ø3x20
ø3x20
ø3x25
ø3x20
ø3x25
ø3x26
ø3x28
ø4x32
ø3x26
ø4x32
ø4x36
ø5x40
ø4x36
ø4x36
ø4.5x40
ø5x50
ø4.5x40
ø5x50
ø6x63
ø10x70
VG2060
VSL2060
VA2060
VG2070
VA2070
VG2080
VA2080
VW2100
VG2100
VA2100
VSL2100
VW2130
VG2130
VA2130
VSL2130
VW2160
VG2160
VA2160
VSL2160
VG2200
VA2200
VD20020
VW2060
VB2060
VW2070
VB2070
VW2080
VB2080
VF2100
VB2100
VF2130
VB2130
VF2160
VB2160
VB2200
VF2060
VC2060
VF2070
VC2070
VF2080
VC2080
VC2100
VC2130
VC2160
VC2200
VD2060
VSL2070
VD20706
VD20807
VD21008
VD21310
VD21613
VD22016
VE2060
VE2070
VE2080
VE2100
VE2130
VE2160
VE2200
VN2060
VN2070
VN2080
VN2100
VN2130
VN2160
VN2200
VR2060
VR2070
VR2080
VR2100
VR2130
VR2160
VR2200
VSL3060
VSL3070
VSL3080
VSL3100
VSL3130
VSL3160
VSL3200
ø7.5x17.5
ø9x22.5
ø10x22.5
ø13x31.5
ø13x29.5
ø16x42
ø16x37
ø21x51.5
ø20x52
ø24x61.5
ø24x73
ø32x95
All clevis-type fittings have chain pins and spring pins packed together with them. When purchasing Kit of Pin for clevis hook as replacements, purchase the Chain Pin Set that matches the fitting according to the table described below.
Clevis-type and eye-type fittings components are available
for Kito chain sling 100 products. Selection can be made from among
a wide range of types to match the usage purposes.
Fittings Components
Chain Pin
Spring Pin
L1
D1
l2
d2
KITO CHAIN SLING 100
7
•Selection Table of kit of Pin for clevis hook
ChainDiameter
(mm)Code Chain Pin
D1 x L1Spring Pin
d2 x l2 Applicable Fittings
VP2060
VP2060B
VP2060K
VP2070
VP2070K
VP2080
VP2080K
VP2100
VP2100F
VP2100K
VP2100B
VP2130
VP2130F
VP2130K
VP2130B
VP2160
VP2160F
VP2160K
VP2160B
VP2200
VP2200K
VP2250
ø6.0
ø7.0
ø8.0
ø10.0
ø13.0
ø16.0
ø20.0
(ø20.0)
ø3x16
ø2.5X16
ø3x20
ø3x20
ø3x25
ø3x20
ø3x25
ø3x26
ø3x28
ø4x32
ø3x26
ø4x32
ø4x36
ø5x40
ø4x36
ø4x36
ø4.5x40
ø5x50
ø4.5x40
ø5x50
ø6x63
ø10x70
VG2060
VSL2060
VA2060
VG2070
VA2070
VG2080
VA2080
VW2100
VG2100
VA2100
VSL2100
VW2130
VG2130
VA2130
VSL2130
VW2160
VG2160
VA2160
VSL2160
VG2200
VA2200
VD20020
VW2060
VB2060
VW2070
VB2070
VW2080
VB2080
VF2100
VB2100
VF2130
VB2130
VF2160
VB2160
VB2200
VF2060
VC2060
VF2070
VC2070
VF2080
VC2080
VC2100
VC2130
VC2160
VC2200
VD2060
VSL2070
VD20706
VD20807
VD21008
VD21310
VD21613
VD22016
VE2060
VE2070
VE2080
VE2100
VE2130
VE2160
VE2200
VN2060
VN2070
VN2080
VN2100
VN2130
VN2160
VN2200
VR2060
VR2070
VR2080
VR2100
VR2130
VR2160
VR2200
VSL3060
VSL3070
VSL3080
VSL3100
VSL3130
VSL3160
VSL3200
ø7.5x17.5
ø9x22.5
ø10x22.5
ø13x31.5
ø13x29.5
ø16x42
ø16x37
ø21x51.5
ø20x52
ø24x61.5
ø24x73
ø32x95
All clevis-type fittings have chain pins and spring pins packed together with them. When purchasing Kit of Pin for clevis hook as replacements, purchase the Chain Pin Set that matches the fitting according to the table described below.
Clevis-type and eye-type fittings components are available
for Kito chain sling 100 products. Selection can be made from among
a wide range of types to match the usage purposes.
Fittings Components
Chain Pin
Spring Pin
L1
D1
l2
d2
KITO CHAIN SLING 100
8
b
a
t
mp
a
t
m p
b
t
n
p
s
b
b m
p
s
b
pm
l
r
a
cp
d
l
b
h
p l
b
t
h b
t
p l
b
a
t
p l
b
p l
t
m'
p
s
n
b
t
m'
p
s
n
b
Clevis Master Link
▲
For single leg slings
▲
For double leg slings
▲
For triple and quadruple leg slings(Using Single Connector VA or Dual Connector VB)
VE
VD
VD
VF
VG
VWClevis Master Link
VSL(VSL3)
Sling Hook
Shackle
VN
Single Connector
VC
Endless Connector
VR
Foundry Hook
Grab Hook
Shortening Clutch
•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•Each fitting has the chain pins and spring pins attached.•The weight of each fitting includes the weights of the chain pins and spring pins.
Single Connector
VA
Dual Connector
VBDual Connector VB
Single Connector VA
Triple
Quadruple
Single Connector VB
VD
F i t t i n g s
Clevis Type
•In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the table at right.
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VN2060VN2070VN2080VN2100VN2130VN2160VN2200
6570.570
79.599.5124.5160.5
0.53
0.89
1.52.75.811.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
26.5
30.5
344354
68.5
a
50
60
6885106135
b
43
47.5
536784105
c
14
17
20253240
d
103
116
135.5169214
271.5
lCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VC2060VC2070VC2080VC2100VC2130VC2160VC2200
5065
64.579
99.5124159
0.28
0.51
1.02.04.28.3
ChainDiameter
(mm)
Mass(Weight)
(kg)p
18.5
26.5
32.54254
67.5
a
45
60
7494120150
b
77.5
99.5
123154194246
l
13.5
17
21.526.533.542
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
ø6ø7
ø10ø13ø16
VR2060VR2070VR2080VR2100VR2130VR2160VR2200
25.5313039506480
0.240.410.420.831.63.56.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44
546684102
b
55
67
86108139172
lCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
VF2060VF2070VF2080VF2100VF2130VF2160
0.7
1.1
1.73.65.6
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
100
120.4
131165
198.5
p
32
40
505868
b
53
64
7689101
n
26
31
3444.550.5
s
21.5
25.5
25.54045
t
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
VW2060VW2070VW2080VW2100VW2130VW2160
0.21
0.48
1.11.82.8
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
45
56
7890106
p
30
35
475870
b
88.69.612.51519
m
2427.530.538.550.562
r
74
92.5
125.5146.5172
l
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6 ø7 ø8
ø10 ø13 ø16 ø20
VG2060VG2070VG2080VG2100VG2130VG2160VG2200
0.2
0.44
0.962.13.45.2
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
50.565.56580
105.5112145
p
30
37
4556
67.584
b
8
10
131619
23.5
m
20.5
27.5
3647
60.575.5
s
Clevis Type
StandardSling Types
Single Leg Sling/Double Leg Sling
Triple Leg Sling/Quadruple Leg Sling
P14
P15
•The chain diameters D and TQ show the number of sling legs. D: Double leg slings, TQ: Triple and quadruple leg slings
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VE2060VE2070VE2080VE2100VE2130VE2160VE2200
115131
130.5146
169.5199250
0.38
0.65
1.12.24.38.5
ChainDiameter
(mm)
Mass(Weight)
(kg)p
56
63
718090112
a
79
91
105122142176
b
90
100
110125145180
m
11.5
14
17212632
tCode
Dimensions (mm)
VSL(VSL2)
Sling Hook (Small Hook)W.L.L.
(Working Load Limit)
(t)
1.11.53.25.28.0
VSL2060VSL2070VSL2100VSL2130VSL2160
6995110136155
0.250.551.0 1.73.2
ChainDiameter
(mm)
Mass(Weight)
(kg)p
29.536
44.55167
b
29.539475864
n
1725293743
m’
20.528334149
s
15192530
37.5
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.72.43.25.18.0
12.520.032.0
ø6ø7ø8
ø10ø13ø16ø20-
- ø6ø7ø8
ø10ø13ø16ø20
VD206VD20706VD20807VD21008VD21310VD21613VD22016VD20020
125140
139.5159
179.5224279359
0.75
1.2
2.24.18.014.930.2
Chain Diameter(mm) Mass
(Weight)(kg)pD T,Q
63
71
8090112140180
a
91
105
122142176220280
b
100
110
125140180225280
m
14
17
2126324050
tCode
Dimensions (mm)
ø6ø7ø8
ø10ø13ø16ø20
VA2060VA2070VA2080VA2100VA2130VA2160VA2200
39.54350598099
119.5
0.230.310.390.721.53.05.3
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44546684102
h
22
27
34425468
b
6975.584.5102132167201
l
7810
12.5162025
tCode
Dimensions (mm)
ø6ø7ø8
ø10ø13ø16ø20
VB2060VB2070VB2080VB2100VB2130VB2160VB2200
39.54350598099
119.5
0.340.470.621.22.34.98.6
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44546684102
h
48
57
7290114142
b
707786104134170205
l
7810
12.5162025
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VSL3060VSL3070VSL3080VSL3100VSL3130VSL3160VSL3200
8510099.5119140
168.5209
0.55
0.94
1.73.57.011.8
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44
546684102
b
45
50
56637595
n
26
31
39465368
m’
24.5
30
37.547.56075
s
18
21.8
27.234.54556
tCode
Dimensions (mm)
9
b
a
t
mp
a
t
m p
b
t
n
p
s
b
b m
p
s
b
pm
l
r
a
cp
d
l
b
h
p l
b
t
h b
t
p l
b
a
t
p l
b
p l
t
m'
p
s
n
b
t
m'
p
s
n
b
Clevis Master Link
▲
For single leg slings
▲
For double leg slings
▲
For triple and quadruple leg slings(Using Single Connector VA or Dual Connector VB)
VE
VD
VD
VF
VG
VWClevis Master Link
VSL(VSL3)
Sling Hook
Shackle
VN
Single Connector
VC
Endless Connector
VR
Foundry Hook
Grab Hook
Shortening Clutch
•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•Each fitting has the chain pins and spring pins attached.•The weight of each fitting includes the weights of the chain pins and spring pins.
Single Connector
VA
Dual Connector
VBDual Connector VB
Single Connector VA
Triple
Quadruple
Single Connector VB
VD
F i t t i n g s
Clevis Type
•In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the table at right.
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VN2060VN2070VN2080VN2100VN2130VN2160VN2200
6570.570
79.599.5124.5160.5
0.53
0.89
1.52.75.811.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
26.5
30.5
344354
68.5
a
50
60
6885106135
b
43
47.5
536784105
c
14
17
20253240
d
103
116
135.5169214
271.5
lCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VC2060VC2070VC2080VC2100VC2130VC2160VC2200
5065
64.579
99.5124159
0.28
0.51
1.02.04.28.3
ChainDiameter
(mm)
Mass(Weight)
(kg)p
18.5
26.5
32.54254
67.5
a
45
60
7494120150
b
77.5
99.5
123154194246
l
13.5
17
21.526.533.542
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
ø6ø7
ø10ø13ø16
VR2060VR2070VR2080VR2100VR2130VR2160VR2200
25.5313039506480
0.240.410.420.831.63.56.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44
546684102
b
55
67
86108139172
lCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
VF2060VF2070VF2080VF2100VF2130VF2160
0.7
1.1
1.73.65.6
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
100
120.4
131165
198.5
p
32
40
505868
b
53
64
7689101
n
26
31
3444.550.5
s
21.5
25.5
25.54045
t
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
VW2060VW2070VW2080VW2100VW2130VW2160
0.21
0.48
1.11.82.8
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
45
56
7890106
p
30
35
475870
b
88.69.612.51519
m
2427.530.538.550.562
r
74
92.5
125.5146.5172
l
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6 ø7 ø8
ø10 ø13 ø16 ø20
VG2060VG2070VG2080VG2100VG2130VG2160VG2200
0.2
0.44
0.962.13.45.2
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
50.565.56580
105.5112145
p
30
37
4556
67.584
b
8
10
131619
23.5
m
20.5
27.5
3647
60.575.5
s
Clevis Type
StandardSling Types
Single Leg Sling/Double Leg Sling
Triple Leg Sling/Quadruple Leg Sling
P14
P15
•The chain diameters D and TQ show the number of sling legs. D: Double leg slings, TQ: Triple and quadruple leg slings
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VE2060VE2070VE2080VE2100VE2130VE2160VE2200
115131
130.5146
169.5199250
0.38
0.65
1.12.24.38.5
ChainDiameter
(mm)
Mass(Weight)
(kg)p
56
63
718090112
a
79
91
105122142176
b
90
100
110125145180
m
11.5
14
17212632
tCode
Dimensions (mm)
VSL(VSL2)
Sling Hook (Small Hook)W.L.L.
(Working Load Limit)
(t)
1.11.53.25.28.0
VSL2060VSL2070VSL2100VSL2130VSL2160
6995110136155
0.250.551.0 1.73.2
ChainDiameter
(mm)
Mass(Weight)
(kg)p
29.536
44.55167
b
29.539475864
n
1725293743
m’
20.528334149
s
15192530
37.5
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.72.43.25.18.0
12.520.032.0
ø6ø7ø8
ø10ø13ø16ø20-
- ø6ø7ø8
ø10ø13ø16ø20
VD206VD20706VD20807VD21008VD21310VD21613VD22016VD20020
125140
139.5159
179.5224279359
0.75
1.2
2.24.18.014.930.2
Chain Diameter(mm) Mass
(Weight)(kg)pD T,Q
63
71
8090112140180
a
91
105
122142176220280
b
100
110
125140180225280
m
14
17
2126324050
tCode
Dimensions (mm)
ø6ø7ø8
ø10ø13ø16ø20
VA2060VA2070VA2080VA2100VA2130VA2160VA2200
39.54350598099
119.5
0.230.310.390.721.53.05.3
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44546684102
h
22
27
34425468
b
6975.584.5102132167201
l
7810
12.5162025
tCode
Dimensions (mm)
ø6ø7ø8
ø10ø13ø16ø20
VB2060VB2070VB2080VB2100VB2130VB2160VB2200
39.54350598099
119.5
0.340.470.621.22.34.98.6
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44546684102
h
48
57
7290114142
b
707786104134170205
l
7810
12.5162025
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
VSL3060VSL3070VSL3080VSL3100VSL3130VSL3160VSL3200
8510099.5119140
168.5209
0.55
0.94
1.73.57.011.8
ChainDiameter
(mm)
Mass(Weight)
(kg)p
38
44
546684102
b
45
50
56637595
n
26
31
39465368
m’
24.5
30
37.547.56075
s
18
21.8
27.234.54556
tCode
Dimensions (mm)
10
t
n
m
c
p
s
m'
ba
t
n
p
s
m'
m
ba
t
n
p
s
a
b
b
a m
p
s
e
d
p
c
ab
f
a
d
p t
g
t
b
a
m'
n
p
s
t
b
a
m'
n
p
s
Master Link
HM
Self Locking Hook
HJ
Swivel Hook
HK
Foundry Hook
HQ
Grab Hook
HH
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
HJ2060
HJ2080
HJ2100HJ2130HJ2160
109
135
168205251
0.5
0.96
1.73.36.1
p
19.5
24.5
3238.548
a
11
12
162027
b
34.5
43.5
566980
n
28
34
4551.559
m
28
34
4551.559
m’
20.5
25.5
30.539.549
s
15.8
20.5
24.534.536.5
t
1.11.52.03.25.2
ø6ø7ø8
ø10ø13
HK2060
HK2080
HK2100HK2130
158
182
217271
0.6
1.1
2.0 4.0
p
35.5
35.5
43.548.5
a
14
14
17.522.5
b
26
26
3343
c
34.5
43.5
5669
n
28
34
4551.5
m
28
34
4551.5
m’
20.5
25.5
30.539.5
s
15.8
20.5
24.534.5
t
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HQ2060
HQ2080
HQ2100HQ2130HQ2160HQ2200
102.5
125
150173210260
0.61
0.92
1.82.85.07.6
p
13.5
22.5
3025.545
53.5
a
12.5
15
16.520.526
30.5
b
53
62
7689101116
n
26
31.5
3444.550.565
s
21.5
26
26404554
t
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HH2060
HH2080
HH2100HH2130HH2160HH2200
51.5
69
86.5110.5129172
0.18
0.4
0.882.03.24.9
p
12
15.5
20.523.53037
a
10
12.5
17.519.523
28.5
b
8
10
131619
23.5
m
20.5
27
3647.560.575.5
s
Hi-coupling
HC 1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HC3060HC3070HC3080HC3100HC3130HC3160HC3200
0.10.180.210.420.861.73.2
This eye-type fitting can be widely used with various kinds of lifting tools (including wire rope). In addition, please contact your Kito dealer regarding special fittings.
•The chain diameters S,D,TQ show the number of sling legs. S: Single leg slings, D: Double leg slings, TQ: Triple and Quadruple leg slings.
•In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the table at right.
•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of the eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•In addition to using the eye-type components by assembling them as Kito Chain Sling 100 products, they can also be used for many other purposes.•Each fitting is not provided with a Hi-coupling. This should be ordered at the same time when placing the order for the fitting.
F i t t i n g s
Eye Type
Sling Hook
HTL(HTL3)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HTL3060
HTL3080
HTL3100HTL3130HTL3160HTL3200
100
120
140171200250
0.49 0.84
1.6 3.0 5.710.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
23
27
32.5384654
a
11
13.5
1721.526.534
b
45
50
56637595
n
26
31
39465368
m’
24.5
30
37.547.56075
s
18
21.8
27.234.54556
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
Eye Type
StandardSling Types
Single Leg Sling/Double Leg Sling
Triple Leg Sling/Quadruple Leg Sling
P16
P17
4855637596118142
p
16.819.422
26.534
41.552.5
a
4551577089110136
b
17.5192327364553
c
89.410.613.116.82025
d
14.316.817.522.328.83645
e
14161822303645
f
11.213.115
18.724.330
37.5
g
W.L.L.(Working Load Limit)
(t)
2.63.24.26.4
10.416.025.0
ø6ø7ø8
ø10ø13ø16ø20
HMS2060HMS2070HMS2080HMS2100HMS2130HMS2160HMS2200
135
160180200260350
1.3
2.33.56.39.6
22.7
ChainDiameter
(mm)
Mass(Weight)
(kg)p
75
90100110140190
a
18
2226323651
d
54
7085115140150
p1
25
3440506570
a1
13
1618222632
d1Code
Dimensions (mm)
The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.
Master Link with Sub Links
HMS a
d
p
a1d1
p1
▲
For triple and quadruple Leg slings
Master Link HMSEye Type
StandardSling Types Triple Leg Sling/Quadruple Leg Sling
P18
Sling Hook (Small Hook)
HTL(HTL2)1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HTL2060
HTL2080
HTL2100HTL2130HTL2160HTL2200
81
101
131159183203
0.25
0.5
0.971.93.34.5
p
18.5
23.5
32.541.548
52.5
a
11.5
11
1619
24.527
b
29.5
39
4758
64.576
n
17
25
293743
52.5
m’
20.5
27
3343
48.553
s
16.5
19
26334051
t
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.72.43.25.28.0
12.5
20.0
ø6ø7ø8
ø10ø13ø16-
ø20-
- ø6ø7ø8
ø10ø13ø16-
ø20
HM20706
HM20807HM21008HM21310HM21613HM21816HM22018HM200
110
110135160180200260280
0.34
0.530.921.62.54.16.28.1
Chain Diameter(mm) Mass
(Weight)(kg)p
60
607590
100110
140
a
13
16182226323640
d
11
1415
18.522283034
tS D
-
ø6ø7ø8
ø10ø13- ø16
T,QCode
Dimensions (mm)
11
t
n
m
c
p
s
m'
ba
t
n
p
s
m'
m
ba
t
n
p
s
a
b
b
a m
p
s
e
d
p
c
ab
f
a
d
p t
g
t
b
a
m'
n
p
s
t
b
a
m'
n
p
s
Master Link
HM
Self Locking Hook
HJ
Swivel Hook
HK
Foundry Hook
HQ
Grab Hook
HH
1.11.52.03.25.28.0
ø6ø7ø8
ø10ø13ø16
HJ2060
HJ2080
HJ2100HJ2130HJ2160
109
135
168205251
0.5
0.96
1.73.36.1
p
19.5
24.5
3238.548
a
11
12
162027
b
34.5
43.5
566980
n
28
34
4551.559
m
28
34
4551.559
m’
20.5
25.5
30.539.549
s
15.8
20.5
24.534.536.5
t
1.11.52.03.25.2
ø6ø7ø8
ø10ø13
HK2060
HK2080
HK2100HK2130
158
182
217271
0.6
1.1
2.0 4.0
p
35.5
35.5
43.548.5
a
14
14
17.522.5
b
26
26
3343
c
34.5
43.5
5669
n
28
34
4551.5
m
28
34
4551.5
m’
20.5
25.5
30.539.5
s
15.8
20.5
24.534.5
t
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HQ2060
HQ2080
HQ2100HQ2130HQ2160HQ2200
102.5
125
150173210260
0.61
0.92
1.82.85.07.6
p
13.5
22.5
3025.545
53.5
a
12.5
15
16.520.526
30.5
b
53
62
7689101116
n
26
31.5
3444.550.565
s
21.5
26
26404554
t
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HH2060
HH2080
HH2100HH2130HH2160HH2200
51.5
69
86.5110.5129172
0.18
0.4
0.882.03.24.9
p
12
15.5
20.523.53037
a
10
12.5
17.519.523
28.5
b
8
10
131619
23.5
m
20.5
27
3647.560.575.5
s
Hi-coupling
HC 1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HC3060HC3070HC3080HC3100HC3130HC3160HC3200
0.10.180.210.420.861.73.2
This eye-type fitting can be widely used with various kinds of lifting tools (including wire rope). In addition, please contact your Kito dealer regarding special fittings.
•The chain diameters S,D,TQ show the number of sling legs. S: Single leg slings, D: Double leg slings, TQ: Triple and Quadruple leg slings.
•In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the table at right.
•When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.•The specifications of the eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.•In addition to using the eye-type components by assembling them as Kito Chain Sling 100 products, they can also be used for many other purposes.•Each fitting is not provided with a Hi-coupling. This should be ordered at the same time when placing the order for the fitting.
F i t t i n g s
Eye Type
Sling Hook
HTL(HTL3)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HTL3060
HTL3080
HTL3100HTL3130HTL3160HTL3200
100
120
140171200250
0.49 0.84
1.6 3.0 5.710.4
ChainDiameter
(mm)
Mass(Weight)
(kg)p
23
27
32.5384654
a
11
13.5
1721.526.534
b
45
50
56637595
n
26
31
39465368
m’
24.5
30
37.547.56075
s
18
21.8
27.234.54556
tCode
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
Eye Type
StandardSling Types
Single Leg Sling/Double Leg Sling
Triple Leg Sling/Quadruple Leg Sling
P16
P17
4855637596118142
p
16.819.422
26.534
41.552.5
a
4551577089110136
b
17.5192327364553
c
89.410.613.116.82025
d
14.316.817.522.328.83645
e
14161822303645
f
11.213.115
18.724.330
37.5
g
W.L.L.(Working Load Limit)
(t)
2.63.24.26.4
10.416.025.0
ø6ø7ø8
ø10ø13ø16ø20
HMS2060HMS2070HMS2080HMS2100HMS2130HMS2160HMS2200
135
160180200260350
1.3
2.33.56.39.6
22.7
ChainDiameter
(mm)
Mass(Weight)
(kg)p
75
90100110140190
a
18
2226323651
d
54
7085115140150
p1
25
3440506570
a1
13
1618222632
d1Code
Dimensions (mm)
The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.
Master Link with Sub Links
HMS a
d
p
a1d1
p1
▲
For triple and quadruple Leg slings
Master Link HMSEye Type
StandardSling Types Triple Leg Sling/Quadruple Leg Sling
P18
Sling Hook (Small Hook)
HTL(HTL2)1.11.52.03.25.28.0
12.5
ø6ø7ø8
ø10ø13ø16ø20
HTL2060
HTL2080
HTL2100HTL2130HTL2160HTL2200
81
101
131159183203
0.25
0.5
0.971.93.34.5
p
18.5
23.5
32.541.548
52.5
a
11.5
11
1619
24.527
b
29.5
39
4758
64.576
n
17
25
293743
52.5
m’
20.5
27
3343
48.553
s
16.5
19
26334051
t
W.L.L.(Working Load Limit)
(t)
ChainDiameter
(mm)
Mass(Weight)
(kg)Code
Dimensions (mm)
W.L.L.(Working Load Limit)
(t)
1.11.72.43.25.28.0
12.5
20.0
ø6ø7ø8
ø10ø13ø16-
ø20-
- ø6ø7ø8
ø10ø13ø16-
ø20
HM20706
HM20807HM21008HM21310HM21613HM21816HM22018HM200
110
110135160180200260280
0.34
0.530.921.62.54.16.28.1
Chain Diameter(mm) Mass
(Weight)(kg)p
60
607590
100110
140
a
13
16182226323640
d
11
1415
18.522283034
tS D
-
ø6ø7ø8
ø10ø13- ø16
T,QCode
Dimensions (mm)
12
•Kito Standard Sling Types [Way to Read The Code]
The Code of the Kito Standard Sling Types consist of the three types described below.
VES VSS
SingleLeg Sling
Sling Type
1
Top Fitting
2
Bottom Fitting
3
Ex.1: Clevis Type
S
D
T
Q
Single Leg Sling
Double Leg Sling
Triple Leg Sling
Quadruple Leg Sling
Single Chain Suspension
Double Chain Suspension
Triple Chain Suspension
Quadruple Chain Suspension
HMQ HTS
QuadrupleLeg Sling
Sling Type
1
Top Fitting
2
Bottom Fitting
3VEVDHMHL
HLDHMSVSSVSNHTSHTNVW
Ex.2: Eye Type
Clevis Master Link VE (VE2)
Clevis Master Link VD (VD2)
Master Link HM (HM2)
Large Master Link HL (HL)
Large Master Link HLD (HLD)
Master Link HMS with Sub Links (HMS)
Sling Hook VSL (VSL3)
Sling Hook VSL (VSL2)
Sling Hook HTL (HTL3)
Sling Hook HTL (HTL2)
Shortening Clutch VW (VW2)
HHHJHKHMHL
HLDHQHTSHTNVCVEVFVGVN
VSSVSNVWOO
Grab Hook HH (HH2)
Self Locking Hook HJ (HJ2)
Swivel Hook HK (HK2)
Master Link HM (HM2)
Large Master Link HL (HL)
Large Master Link HLD (HLD)
Foundry Hook HQ (HQ2)
Sling Hook HTL (HTL3)
Sling Hook HTL (HTL2)
Connector VC (VC2)
Master Ring VE (VE2)
Foundry Hook VF (VF2)
Grab Hook VG (VG2)
Shackle VN (VN2)
Sling Hook VSL (VSL3)
Sling Hook VSL (VSL2)
Shortening Clutch VW (VW2)
Endless Connector
This shows the basic system of the Sling Types.
A wide range of types of Standard Sling Types,
from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products.
These should be selected to match the usage purpose.
Standard Sling TypesKITO CHAIN SLING 100
13
•Kito Standard Sling Types [Way to Read The Code]
The Code of the Kito Standard Sling Types consist of the three types described below.
VES VSS
SingleLeg Sling
Sling Type
1
Top Fitting
2
Bottom Fitting
3
Ex.1: Clevis Type
S
D
T
Q
Single Leg Sling
Double Leg Sling
Triple Leg Sling
Quadruple Leg Sling
Single Chain Suspension
Double Chain Suspension
Triple Chain Suspension
Quadruple Chain Suspension
HMQ HTS
QuadrupleLeg Sling
Sling Type
1
Top Fitting
2
Bottom Fitting
3VEVDHMHL
HLDHMSVSSVSNHTSHTNVW
Ex.2: Eye Type
Clevis Master Link VE (VE2)
Clevis Master Link VD (VD2)
Master Link HM (HM2)
Large Master Link HL (HL)
Large Master Link HLD (HLD)
Master Link HMS with Sub Links (HMS)
Sling Hook VSL (VSL3)
Sling Hook VSL (VSL2)
Sling Hook HTL (HTL3)
Sling Hook HTL (HTL2)
Shortening Clutch VW (VW2)
HHHJHKHMHL
HLDHQHTSHTNVCVEVFVGVN
VSSVSNVWOO
Grab Hook HH (HH2)
Self Locking Hook HJ (HJ2)
Swivel Hook HK (HK2)
Master Link HM (HM2)
Large Master Link HL (HL)
Large Master Link HLD (HLD)
Foundry Hook HQ (HQ2)
Sling Hook HTL (HTL3)
Sling Hook HTL (HTL2)
Connector VC (VC2)
Master Ring VE (VE2)
Foundry Hook VF (VF2)
Grab Hook VG (VG2)
Shackle VN (VN2)
Sling Hook VSL (VSL3)
Sling Hook VSL (VSL2)
Shortening Clutch VW (VW2)
Endless Connector
This shows the basic system of the Sling Types.
A wide range of types of Standard Sling Types,
from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products.
These should be selected to match the usage purpose.
Standard Sling TypesKITO CHAIN SLING 100
14
•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling
A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
S t a n d a r d S l i n g Ty p e s
ClevisType SCP2
Clevis Type Single Leg Sling
W.L.L.(Working Load Limit)
(t)
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
S-VE-VE S-VE-VSS S-VE-VF *S-VE-VG S-VE-VC S-VE-VN S-VE-VW S-VSS-VSS *S-VSS-VG S-VSS-VW S-VW-VW
1.1 φ6(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.14 Weight 1.8 2.0 2.1 1.7 1.7 2.0 1.7 2.2 1.9 1.9 0.46
1.5 φ7(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.17Weight 2.7 3.0 3.2 2.5 2.6 3.0 2.6 3.3 2.9 2.9 1.0
2.0 φ8(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.18Weight 3.1 3.4 3.5 2.9 3.0 3.4 3.0 3.7 3.3 3.4 1.1
3.2 φ10(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 0.24Weight 4.9 5.6 5.5 4.9 4.9 5.4 5.1 6.3 5.6 5.7 2.4
5.2 φ13(×1) Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 0.29Weight 10.8 12.4 12.2 11.0 10.9 11.6 10.8 13.7 12.3 12.1 4.0
8.0 φ16(×1) Reach: L 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.35Weight 22.6 25.3 23.9 22.4 23.2 24.8 21.5 28.7 25.1 24.8 6.5
12.5 φ20(×1) Reach: L 3.0 3.0 - 3.0 3.0 3.0 - 3.0 3.0 - -Weight 43.1 46.4 - 41.0 44.1 47.2 - 50.9 44.3 - -
Clevis Type Double Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass(Weight) (kg)
Code
D-VD-VSS D-VD-VF D-VD-VC D-VD-VN D-VD-OO
1.7 φ6(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 3.9 4.2 3.4 3.9 3.0
2.4 φ7(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 5.9 6.2 5.1 5.8 4.3
3.2 φ8(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.7 6.9 5.8 6.6 5.1
5.1 φ10(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.1 11.1 10.0 11.0 8.3
8.0 φ13(×2) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 24.1 24.3 21.7 23.1 18.5
12.5 φ16(×2) Reach: L 2.5 2.5 2.5 2.5 2.5 Weight 49.5 46.7 45.1 48.3 38.3
20.0 φ20(×2) Reach: L 3.0 - 3.0 3.0 3.0 Weight 89.4 - 84.8 91.0 71.3
•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
S-VE-VE S-VE-VSS S-VE-VF S-VE-VG* S-VE-VC S-VE-VN S-VE-VW S-VSS-VSS S-VSS-VG* S-VSS-VW S-VW-VW
D-VD-VSS D-VD-VF D-VD-VC D-VD-VN D-VD-OO
L L L L L L L L L L
LLLLL
L
15
•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.
Clevis Type Triple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
T-VD-VSS T-VD-VF T-VD-VC T-VD-VN
2.4 φ6(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 6.4 6.9 5.7 6.4
3.2 φ7(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 8.9 9.4 7.7 8.9
5.0 φ8(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 11.2 11.4 10.1 11.0
8.0 φ10(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 18.8 18.8 17.1 18.6
12.5 φ13(×3) Reach: L 2.0 2.0 2.0 2.0 Weight 40.5 40.8 36.0 38.1
20.0 φ16(×3) Reach: L 2.5 2.5 2.5 2.5 Weight 82.2 78.0 75.6 80.4
32.0 φ20(×3) Reach: L 3.0 - 3.0 3.0 Weight 150.4 - 143.5 152.8
Clevis Type Quadruple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
Q-VD-VSS Q-VD-VF Q-VD-VC Q-VD-VN Q-VD-OO
2.4 φ6(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 8.2 8.7 7.1 8.1 6.2
3.2 φ7(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.5 12.0 9.8 11.3 8.0
5.0 φ8(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 14.3 14.4 12.6 13.9 10.8
8.0 φ10(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 24.0 23.6 21.3 23.3 18.0
12.5 φ13(×4) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 51.8 51.3 44.9 47.7 39.0
20.0 φ16(×4) Reach: L 2.5 2.5 2.5 2.5 2.5 Weight 105.6 98.3 95.2 101.6 81.5
32.0 φ20(×4) Reach: L 3.0 - 3.0 3.0 3.0 Weight 192.3 - 180.0 192.4 152.8
Q-VD-VSS Q-VD-VF Q-VD-VC Q-VD-VN Q-VD-OO
T-VD-VSS T-VD-VF T-VD-VC T-VD-VN
L
L L L L
LL LL
16
S t a n d a r d S l i n g Ty p e s
EyeType SCE2
•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling
Eye Type Single Leg Sling
W.L.L.(Working Load Limit)
(t)
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
S-HM-HM S-HM-HTS S-HM-HJ S-HM-HK S-HM-HQ *S-HM-HH S-HTS-HTS *S-HTS-HH
1.1 φ6(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 1.8 2.0 2.0 2.1 2.1 1.7 2.1 1.9
1.5 φ7(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 2.4 2.9 2.9 3.0 2.9 2.5 3.3 3.0
2.0 φ8(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 3.1 3.4 3.6 3.6 3.5 3.1 3.7 3.4
3.2 φ10(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 Weight 5.1 5.8 5.8 6.1 6.0 5.2 6.5 5.9
5.2 φ13(×1) Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 Weight 10.7 12.1 12.1 12.8 11.9 11.4 13.5 12.8
8.0 φ16(×1) Reach: L 2.5 2.5 2.5 - 2.5 2.5 2.5 2.5 Weight 21.2 24.4 24.2 - 23.7 21.9 27.0 25.1
12.5 φ20(×1) Reach: L 3.0 3.0 - - 3.0 3.0 3.0 3.0 Weight 41.2 45.4 - - 42.6 41.1 49.6 45.3
Eye Type Double Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
D-HM-HTS D-HM-HJ D-HM-HK D-HM-HQ D-HM-OO
1.7 φ6(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 3.6 3.7 3.8 3.9 2.7
2.4 φ7(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 5.6 5.7 5.9 5.6 3.9
3.2 φ8(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.6 6.8 7.0 6.8 5.1
5.1 φ10(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.1 11.3 11.6 11.5 8.2
8.0 φ13(×2) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 23.5 23.5 24.3 23.1 17.7
12.5 φ16(×2) Reach: L 2.5 2.5 - 2.5 2.5 Weight 46.6 47.4 - 45.2 36.5
20.0 φ20(×2) Reach: L 3.0 - - 3.0 3.0 Weight 86.5 - - 80.9 65.7
•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
S-HM-HM S-HM-HTS S-HM-HJ S-HM-HK S-HM-HQ S-HM-HH* S-HTS-HTS S-HTS-HH*
D-HM-HTS D-HM-HJ D-HM-HK D-HM-HQ D-HM-OO
LLLLLL L L
LLLLL
A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as Kito Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
17
Eye Type Triple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
T-HM-HTS T-HM-HJ T-HM-HK T-HM-HQ
2.4 φ6(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 5.7 5.8 6.0 6.1
3.2 φ7(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 8.5 8.9 9.2 8.8
5.0 φ8(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 10.7 10.8 11.0 10.9
8.0 φ10(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 17.9 18.2 18.7 18.5
12.5 φ13(×3) Reach: L 2.0 2.0 2.0 2.0 Weight 36.8 37.7 38.9 36.2
20.0 φ16(×3) Reach: L 2.5 2.5 - 2.5 Weight 75.5 74.8 - 71.5
Eye Type Quadruple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
Q-HM-HTS Q-HM-HJ Q-HM-HK Q-HM-HQ Q-HM-OO
2.4 φ6(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.3 7.4 7.7 7.8 5.5
3.2 φ7(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 10.9 11.4 11.8 11.3 7.7
5.0 φ8(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 13.4 13.6 13.9 13.7 10.2
8.0 φ10(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 22.4 22.8 23.5 23.2 16.3
12.5 φ13(×4) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 46.5 47.7 49.3 45.7 35.5
20.0 φ16(×4) Reach: L 2.5 2.5 - 2.5 2.5 Weight 95.8 94.9 - 90.5 73.1
Q-HM-HTS Q-HM-HJ Q-HM-HK Q-HM-HQ Q-HM-OO
T-HM-HTS T-HM-HJ T-HM-HK T-HM-HQ
L
L L L L
LLLL
•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.
18
S t a n d a r d S l i n g Ty p e s
(HMS)
Master Link with Sub Links HMS•Triple Leg Sling•Quadruple Leg Sling•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.
EyeType
SCE2
Eye Type Triple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
T-HMS-HTS T-HMS-HJ T-HMS-HK T-HMS-HQ
2.6 φ6(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 6.0 6.1 6.3 6.4
3.2 φ7(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 8.5 8.9 9.1 8.7
4.2 φ8(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 10.5 10.9 11.1 10.8
6.4 φ10(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 17.2 17.5 18.0 17.8
10.4 φ13(×3) Reach: L 2.0 2.0 2.0 2.0 Weight 35.6 36.5 37.7 35.0
16.0 φ16(×3) Reach: L 2.5 2.5 - 2.5 Weight 70.6 69.9 - 68.5
25.0 φ20(×3) Reach: L 3.0 - - 3.0 Weight 134.9 - - 126.5
Eye Type Quadruple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
Q-HMS-HTS Q-HMS-HJ Q-HMS-HK Q-HMS-HQ
2.6 φ6(×4) Reach: L 1.5 1.5 1.5 1.5 Weight 7.6 7.7 8.0 8.1
3.2 φ7(×4) Reach: L 1.5 1.5 1.5 1.5 Weight 10.9 11.4 11.8 11.2
4.2 φ8(×4) Reach: L 1.5 1.5 1.5 1.5 Weight 13.3 13.7 14.0 13.6
6.4 φ10(×4) Reach: L 1.5 1.5 1.5 1.5 Weight 21.7 22.1 22.8 22.5
10.4 φ13(×4) Reach: L 2.0 2.0 2.0 2.0 Weight 45.3 46.5 48.1 44.5
16.0 φ16(×4) Reach: L 2.5 2.5 - 2.5 Weight 90.9 90.0 - 88.1
25.0 φ20(×4) Reach: L 3.0 - - 3.0 Weight 172.3 - - 161.1
T-HMS-HTS T-HMS-HJ T-HMS-HK T-HMS-HQ
Q-HMS-HTS Q-HMS-HJ Q-HMS-HK Q-HMS-HQ
L
L
L
L
L
L
L
L
19
Constituent Components Reference Example
Clevis Type Constituent Components The case of ø7 mm chains
• For single and double leg slings, use components that are appropriate for the chain size that is being used.• *1: For triple (and quadruple) slings, use Clevis Master Link VD (together with Chain Pins) for chain diameters that are one size higher.
• For single leg slings, use components that are appropriate for the W.L.L. (Working Load Limit) of the link chain that is being used.• *2: For double leg slings, only the Master Links should use components for working load limits that are one level higher.• *3: For quadruple (and triple) leg slings, use Master Links for working load limits that are two levels higher, and use Hi-couplings (for the Sub Links) for working load limits that are one level higher.• In the situation of using the Large-sized Master Link HL/HLD and the Master Link HMS, because the constituent components will be different, contact your Kito dealer for more details.
k i t o f p i n a r e p a c k e d t o g e t h e r w i t h a l l t h e fi t t i n g s .
Single Leg SlingS-VE-VSS
Double Leg SlingD-VD-VSS
Triple Leg Sling/Quadruple Leg SlingT-VD-VSS/Q-VD-VSS
7 mm Clevis Master Link VE (VE2070)
7 mm kit of pin VP (VP2070K)
7 mm kit of pin VP (VP2070)
7 mm Sling Hook VSL (VSL3070)
7 mm Link Chain (SV2070)
6/7 mm Master Link HM (HM20706)
7 mm Hi-coupling HC (HC3070)
7 mm Hi-coupling HC (HC3070)
7 mm Sling Hook HTL (HTL3080)
7 mm Link Chain (SV2070)
6/7/8 mm Master Link HM (HM20807) *2
7 mm Hi-coupling HC (HC3070)
7 mm Hi-coupling HC (HC3070)
7 mm Sling Hook HTL (HTL3080)
7 mm Link Chain (SV2070)
Eye Type Constituent Components The case of ø7 mm chains
Single Leg SlingS-HM-HTS
Double Leg SlingD-HM-HTS
Triple Leg Sling/Quadruple Leg SlingT-HM-HTS/Q-HM-HTS
7/8/10 mm Master Link HM (HM21008) *3
7 mm Hi-coupling HC (HC3070)
7 mm Hi-coupling HC (HC3070)
7 mm Sling Hook HTL (HTL3080)
7 mm Link Chain (SV2070)
8 mm Hi-coupling HC (HC3080) *3
6/7 mm Clevis Master Link VD (VD20706)
7 mm kit of pin VP (VP2070K)
7 mm kit of pin VP (VP2070)
7 mm Sling Hook VSL (VSL3070)
7 mm Link Chain (SV2070)
7/8 mm Clevis Master Link VD (VD20807) *1
8 mm kit of pin VP (VP2080K)
7 mm kit of pin VP (VP2070K)
7 mm kit of pin VP (VP2070)
7 mm Sling Hook VSL (VSL3070)
7 mm Link Chain (SV2070)
7 mm Dual Connector VB (VB2070)
7 mm Single Connector VA (VA2070)
Kito Sling Tag Kito Sling TagKito Sling Tag
Kito Sling Tag Kito Sling Tag
Kito Sling Tag
20
Large Master Link HL/HLD Specifications Table
Hi-coupling Combinations for use with the Large Master Link HL/HLD
1.11.51.72.03.25.08.011.5
1.11.52
3.258
11.51.72
3.258
11.52
3.258
11.52
3.258
11.5
ø6ø7ø8ø10ø13ø16ø20ø6ø7ø8ø10ø13ø16ø6ø7ø8ø10ø13ø6ø7ø8ø10ø13
HL020HL020HL020HL030HL050
HLD080HLD115HL020HL020HL030HL050
HLD080HLD115HL020HL030HL050
HLD080HLD115HL020HL030HL050
HLD080HLD115
HC3080HC3080HC3080HC3100HC3130HC3160HC3200
HC3080x2HC3080x2HC3080x2HC3100x2HC3160x2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2
HC3060HC3070-----
HC3060x2HC3070x2--
HC3130x2HC3160x2HC3060X3HC3070X3HC3080X3HC3100X3HC3130X3HC3060X4HC3070X4HC3080X4HC3100X4HC3130X4
ø6ø7-
ø8ø10ø13ø16ø20
--
ø6ø7ø8ø10ø13ø16
---
ø6ø7ø8ø10ø13
W.L.L.(Working Load Limit)
(t)
W.L.L.(Working Load Limit)
(t)Chain Diameter
(mm)
Singleleg
Doublelegs
Triplelegs
Quadruplelegs
Single leg
Master Link Hi-coupling Referencediagram
S D T,Q
Chain Diameter (mm)
The example photograph mentioned above uses all HLD080.
Dimensions (mm) Mass(weight)
(kg)dapCode
1.2
1.62.18.09.8
17
20233640
t
13
1619.528.533.5
112
112112180180
225
225225340340
HL020
HL030HL050
HLD080HLD115
a
d
p t
Large Master Link for Use on Work Sites with Large Cranes!The link’s large width makes it suitable for use with various types of large-sized cranes, tower cranes, and wire rope hoists.
Working Load Limit
1.1t
11.5t
HL020
HLD115
•Chain Diameter S.D.TQ mean number of chain. S: Single sling / D: Double sling / TQ: Triple or Quadraple sling
•Large Master Link HL/HLD Specifications Table •Hi-coupling Combinations for use with the Large Master Link HL/HLD
Large Master Link HL/HLD
180mm
The HLD type hasa large width.
Double legs Triple legs Quadruple legs
In the case of assembling set products
using the Large Master Link HL/HLD,
use in combination with Hi-couplings
as described in the contents of the
table at right.
Reference example
21
Large Master Link HL/HLD Specifications Table
Hi-coupling Combinations for use with the Large Master Link HL/HLD
1.11.51.72.03.25.08.0
11.5
1.11.52
3.258
11.51.72
3.258
11.52
3.258
11.52
3.258
11.5
ø6ø7ø8
ø10ø13ø16ø20ø6ø7ø8
ø10ø13ø16ø6ø7ø8
ø10ø13ø6ø7ø8
ø10ø13
HL020HL020HL020HL030HL050
HLD080HLD115HL020HL020HL030HL050
HLD080HLD115HL020HL030HL050
HLD080HLD115HL020HL030HL050
HLD080HLD115
HC3080HC3080HC3080HC3100HC3130HC3160HC3200
HC3080x2HC3080x2HC3080x2HC3100x2HC3160x2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2HC3080x2HC3080X2HC3100X2HC3160X2HC3200x2
HC3060HC3070-----
HC3060x2HC3070x2--
HC3130x2HC3160x2HC3060X3HC3070X3HC3080X3HC3100X3HC3130X3HC3060X4HC3070X4HC3080X4HC3100X4HC3130X4
ø6ø7-
ø8ø10ø13ø16ø20
--
ø6ø7ø8
ø10ø13ø16
---
ø6ø7ø8
ø10ø13
W.L.L.(Working Load Limit)
(t)
W.L.L.(Working Load Limit)
(t)Chain Diameter
(mm)
Singleleg
Doublelegs
Triplelegs
Quadruplelegs
Single leg
Master Link Hi-coupling Referencediagram
S D T,Q
Chain Diameter (mm)
The example photograph mentioned above uses all HLD080.
Dimensions (mm) Mass(weight)
(kg)dapCode
1.2
1.62.18.09.8
17
20233640
t
13
1619.528.533.5
112
112112180180
225
225225340340
HL020
HL030HL050
HLD080HLD115
a
d
p t
Large Master Link for Use on Work Sites with Large Cranes!The link’s large width makes it suitable for use with various types of large-sized cranes, tower cranes, and wire rope hoists.
Working Load Limit
1.1t
11.5t
HL020
HLD115
•Chain Diameter S.D.TQ mean number of chain. S: Single sling / D: Double sling / TQ: Triple or Quadraple sling
•Large Master Link HL/HLD Specifications Table •Hi-coupling Combinations for use with the Large Master Link HL/HLD
Large Master Link HL/HLD
180mm
The HLD type hasa large width.
Double legs Triple legs Quadruple legs
In the case of assembling set products
using the Large Master Link HL/HLD,
use in combination with Hi-couplings
as described in the contents of the
table at right.
Reference example
22
Eye Type Single Leg Sling
W.L.L.(Working Load Limit)
(t)
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
S-HL-HL S-HL-HTS S-HL-HJ S-HL-HK S-HL-HQ S-HL-HH*1.1 φ6(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5
Weight 3.7 2.9 2.9 3.0 3.1 2.7
1.5 φ7(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 4.1 3.7 3.8 3.9 3.8 3.3
2.0 φ8(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 4.1 3.9 4.0 4.1 4.0 3.5
3.2 φ10(×1) Reach: L 1.5 1.5 1.5 1.5 1.5 1.5 Weight 6.1 6.2 6.3 6.5 6.4 5.6
5.0 φ13(×1) Reach: L 2.0 2.0 2.0 2.0 2.0 2.0 Weight 11.1 12.3 12.6 13.0 12.1 11.6
S-HLD-HLD S-HLD-HTS S-HLD-HJ - S-HLD-HQ S-HLD-HH
8.0 φ16(×1) Reach: L 2.5 2.5 2.5 - 2.5 2.5 Weight 29.7 28.6 28.4 - 27.9 26.8
11.5 φ20(×1) Reach: L 3.0 3.0 - - 3.0 3.0 Weight 47.2 49.0 - - 46.2 43.5
Eye Type Double Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
D-HL-HTS D-HL-HJ D-HL-HK D-HL-HQ D-HL-OO
1.7 φ6(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 4.7 4.6 4.8 4.9 3.7
2.0 φ7(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 6.2 6.5 6.6 6.4 4.6
3.2 φ8(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.0 7.2 7.4 7.2 5.5
5.0 φ10(×2) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.3 11.5 11.9 11.7 8.3
D-HLD-HTS D-HLD-HJ D-HLD-HK D-HLD-HQ D-HLD-OO
8.0 φ13(×2) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 30.3 30.3 31.1 29.9 24.5
11.5 φ16(×2) Reach: L 2.5 2.5 - 2.5 2.5 Weight 55.6 55.2 - 54.2 44.9
•For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.
S-HL-HL/S-HLD-HLD S-HL-HTS/S-HLD-HTS S-HL-HJ/S-HLD-HJ S-HL-HK S-HL-HQ/S-HLD-HQ S-HL-HH/S-HLD-HH*
D-HL-HTS/D-HLD-HTS D-HL-HJ/D-HLD-HJ D-HL-HK/D-HLD-HK D-HL-HQ/D-HLD-HQ D-HL-OO/D-HLD-OO
In the case of 6mm and 7mm chain diameter single sling set products, two Hi-couplings should be used for connecting the Master Link to the Hi-coupling.
In the case of 6mm, 7mm, 13mm, and 16mm chain diameter double sling standard set products, two Hi-couplings should be used for connecting the Master Link to the Hi-coupling.
1 or 2 upper size
1 or 2 upper size
6mm and 7mm chain
6mm, 7mm, 13mm, and 16mm chain
LLLLLL
LLLLL
S t a n d a r d S l i n g Ty p e s
(HL/HLD)
Master Link HL/HLD•Single Leg Sling•Double Leg Sling•Triple Leg Sling•Quadruple Leg Sling•Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your Kito dealer for more information.•The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your Kito dealer for more information.
EyeType
SCE2
23
Eye Type Triple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
T-HL-HTS T-HL-HJ T-HL-HK T-HL-HQ
2.0 φ6(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 6.2 6.1 6.4 6.6
3.2 φ7(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 8.9 9.3 9.4 9.2
5.0 φ8(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 10.8 11.2 11.4 11.0
T-HLD-HTS T-HLD-HJ T-HLD-HK T-HLD-HQ
8.0 φ10(×3) Reach: L 1.5 1.5 1.5 1.5 Weight 23.9 24.2 24.7 24.5
11.5 φ13(×3) Reach: L 2.0 2.0 2.0 2.0 Weight 43.7 44.6 45.8 43.1
Eye Type Quadruple Leg Sling
W.L.L.(Working Load Limit)
(t) θ=60°
Chain Diameter(mm)
(x Number of Chains)
Dimensions (mm)Mass (Weight) (kg)
Code
Q-HL-HTS Q-HL-HJ Q-HL-HK Q-HL-HQ Q-HL-OO
2.0 φ6(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 7.7 7.6 7.9 8.2 5.8
3.2 φ7(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 11.3 11.7 11.9 11.6 8.0
5.0 φ8(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 13.4 13.9 14.2 13.7 10.3
Q-HLD-HTS Q-HLD-HJ Q-HLD-HK Q-HLD-HQ Q-HLD-OO
8.0 φ10(×4) Reach: L 1.5 1.5 1.5 1.5 1.5 Weight 28.0 28.4 29.1 28.8 21.9
11.5 φ13(×4) Reach: L 2.0 2.0 2.0 2.0 2.0 Weight 52.9 54.1 55.7 52.1 41.9
Q-HL-HTS/Q-HLD-HTS Q-HL-HJ/Q-HLD-HJ Q-HL-HK/Q-HLD-HK Q-HL-HQ/Q-HLD-HQ Q-HL-OO/Q-HLD-OO
T-HL-HTS/T-HLD-HTS T-HL-HJ/T-HLD-HJ T-HL-HK/T-HLD-HK T-HL-HQ/T-HLD-HQ
L
L L L L
LLLL
24
25
26
Reference Examples of Special Specification Systems Introduction to High Versatility Balance Beams
Standard Type Balance Beams These are ideal for lifting long objects in locations where the height is restricted. They allow work that makes effective use of the space.
Distance Bar Type Balance Beams These are perfect for lifting long objects. They realize stable and well-balanced lifting.
Balance Beams for Plastic Containers These are ideal for moving plastic containers. Because the levers can be opened and closed by one-hand operation, it will be possible to control the load while keeping hold of the push button unit.
Balance Beams for Flexible Containers These are perfect for lifting flexible containers The containers are firmly held by the four loops, realizing stable lifting work.
Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.
Overhead Crane(Single Girder)
Overhead Crane(Double Girder)
Jib Crane Pillar Type(JP Type)
Jib Crane Wall Type(JW Type)
Jib Crane Wall Type(LJW Type)
Light Crane(Steel Rail)
Light Crane(Aluminum Rail)
Low-head Crane Gantry Crane
Electric Chain Hoist ER2/EQ/ED(60kg to 20t)
Wire Rope Hoist(1/2t to 60t)
Chain Hoist M3/CX(250kg to 50t)
Products are order-made to match applications. (Several examples are introduced below)
Each Typeof Crane
Each Typeof Hoist
Kito Chain Sling 100Special Specifications
For Coils
For Train Wheels
For Coils
For Balance Beams/Distance Bars
For Rails
For Balance Beams/Standard Types
For Plastic Containers
For Pipes
For Short Headroom Types
For Pallets
In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,
Kito Chain Sling 100 “Special Specification” products will support every requirement.
S
S
S
S
L
S
L
27
Reference Examples of Special Specification Systems Introduction to High Versatility Balance Beams
Standard Type Balance Beams These are ideal for lifting long objects in locations where the height is restricted. They allow work that makes effective use of the space.
Distance Bar Type Balance Beams These are perfect for lifting long objects. They realize stable and well-balanced lifting.
Balance Beams for Plastic Containers These are ideal for moving plastic containers. Because the levers can be opened and closed by one-hand operation, it will be possible to control the load while keeping hold of the push button unit.
Balance Beams for Flexible Containers These are perfect for lifting flexible containers The containers are firmly held by the four loops, realizing stable lifting work.
Kito offers a variety of systems that are created by combining Kito Chain Sling 100 products with Kito’s motorized and manual hoists and cranes.Special specifications are realized as order-made products.
Overhead Crane(Single Girder)
Overhead Crane(Double Girder)
Jib Crane Pillar Type(JP Type)
Jib Crane Wall Type(JW Type)
Jib Crane Wall Type(LJW Type)
Light Crane(Steel Rail)
Light Crane(Aluminum Rail)
Low-head Crane Gantry Crane
Electric Chain Hoist ER2/EQ/ED(60kg to 20t)
Wire Rope Hoist(1/2t to 60t)
Chain Hoist M3/CX(250kg to 50t)
Products are order-made to match applications. (Several examples are introduced below)
Each Typeof Crane
Each Typeof Hoist
Kito Chain Sling 100Special Specifications
For Coils
For Train Wheels
For Coils
For Balance Beams/Distance Bars
For Rails
For Balance Beams/Standard Types
For Plastic Containers
For Pipes
For Short Headroom Types
For Pallets
In the situation where you wish to transport unique work pieces with high efficiency using dedicated slings,
Kito Chain Sling 100 “Special Specification” products will support every requirement.
S
S
S
S
L
S
L
28
medicine
KITO CHAIN SLING 100
Strictly Avoid OverloadingKito Chain Sling 100 products have Kito Sling Tags attached. Be sure to use the product within the range of the working load limits displayed on the Kito Sling Tag. (Refer to page 3.)
Changes in the Working Load Limit according to the Angle of Loading
The working load limits will change according to the angle of loading. Be certain to confirm the actual angle of loading with the angle of loading and working load limits described on the Kito Safety Tag.
Minimizing the Impact Loading Impact loading will lead to unexpected overloading. Take particular care to avoid shock when the loads are lifted off and returned to the ground.
Measures when Loads have Sharp Edges For loads that have sharper edges, an increasingly unreasonable force will be applied to the chain slings, affecting their strength. Apply pads to protect the load and chains, and use chains considering the safety factor margin.
Chain Twisting and TanglingVerify that the chain is not twisted, tangled, or tangled with the sling components prior to use.
When the Load is Out of BalanceSuspend loads in such a way that the loading is applied equally to all the chain slings. In cases where the form of the load makes it difficult to suspend with equal loading on each chain, select the slings while considering the chain side that bears the heaviest load as the reference.
Apply Loads to the Center of the HookBe certain to suspend the load from the center of the hook (deepest part). Avoid suspending loads from the hook tip.
Variations in Working Load Limits under High Temperatures
In the situation of using chain slings in high temperature environments, or in cases where chain slings are used under normal temperatures after they have been used in high temperature environments, the working load limits should be reduced according to the corresponding temperature in the table below.
Resistance to ChemicalsThese products cannot be used in environments that are subject to chemicals.
Leaving Loads in a Suspended Condition
Do not leave loads in a suspended condition for long periods.
Reductions in the Working Load Limits
To allow safe use of chain slings, when using under the following conditions the working load limits should be reduced to 80% or less of the values given in the working load limit list.(1) Work that is carried out with high frequency or when the working load is applied continuously(2) Work in which vibration is applied continuously(3) Usage by incorporation in an automatic line
Chain Sling Usage Limits Observe the usage limitations due to wear and elongation, and do not use products that have become deformed or cracked.
BULLETIN NO. CSGE1508-05
1
Supporting ideal lifting work with outstanding quality
Printed in japan 30.01(SE.H)CSGE05-011
Distributed by:
•The functions and performance of the products mentioned in the catalog have been designed based on the related regulations and standards. If they are used for other than their intended purposes such as being integrated into your equipment, we will not take any responsibility for accidents attributable to their unintended usages as well as guarantee their performance and functions. Never remodel our products. •In case you intend to use our products for special purposes, consult us in advance.•In case you intend to export our products, consult us in advance. There are different standards and regulations from one destination to another.•It is prohibited to reprint, copy or divert all the information in this catalog (product patents, trademarks, photos, designs, copies, illustrations, etc.) without our consent.•The specifications in this catalog are partly subject to change without prior notice.
KITO CORPORATIONSHINJUKU NS Bldg. 9F, 2-4-1 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-0809 JAPANTEL: +81-3-5908-0180 FAX: +81-3-5908-0189 www.kito.co.jp/en KITO Global Website: kito.com
1 8
9
10
11
12
2
3
4
5
6
7
Precautions for Use Recommendationsfor Correct Equipment
Administration
Inspection is the first step of safety.
In order to use the equipment
safety, carry out the daily
inspections, monthly inspections
and periodic inspections.
Daily and Periodic InspectionsDaily inspections should be implemented by the operator before using the chain slings for work. In addition, periodic inspections should be implemented by the persons determined by the business entity.
Chain Sling StorageStore chain slings in appropriate locations under favorable environments where they will not rust.
Chain Sling Record AdministrationThe administration of inspection records is important for the safe use of chain slings.
Kito has prepared a “Periodic Inspection Standards Manual” which describes the inspection standards and periodic inspection check sheets.
•This catalog is intended to allow the use of Kito Chain Sling 100 products at working load limits with a safety factor of 5:1.
•When you want to export our products, consult us in advance. There are different standards and regulations from one destination to another
1
2
3
Working load limit (%)Temperature, t (°C)
-40 < t ≤ 100100 < t ≤ 260200 < t ≤ 300300 < t ≤ 350350 < t ≤ 400
Over 400
10090756560
Usage not allowed