Upload
dinhlien
View
232
Download
0
Embed Size (px)
Citation preview
Stucki Brake Beam—Angle Corrected, Reversible Strut
Stucki Extended Travel—Metal Capped
Stucki Standard Travel—Metal Capped
Resilient Friction Elements
Height & Wear Indicator Inspection Additional Wear Indicator Inspection
Setup Height Measurement & AdjustmentHydraulic StabilizersPlates & Wedges
Inspection and Maintenance ChartStucki Standard Travel—Dual Action
Model ISB-125400 lb. Preload
Model ISB-9DR4500 lb. Preload
Model ISB-104500 lb. Preload
Stucki Standard Travel—Nonmetal Capped
Model 656-CR6000 lb. Preload
Model 690-RL3600 lb. Preload
Model 688-BR6000 lb. Preload
Tank Car Options
Model 675-RL3000 lb. Preload
Model 685-RM4500 lb. Preload
Model 656-CRH5400 lb. Preload
RetroXT LP Bolt−On
For most Standard and Extended (long) Travel metal capped bearings, a quick reference visual height indicator is shown for at-a-glance checking. (Side bearings are shown at free height.)
Brake beams available with replaceable heads, optional reversible strut, and diagonally corrected end extensions. (See A. Stucki Product Guide for more information. Also refer to AAR Rule 6 in the Field Manual for inspection and wear limit criteria.)
Upgrade to extended travel with RetroXT 5400C
Used for Barber Trucks Used for Ride Control Trucks Used for Super Service Ride Control Trucks
Used for Barber S-2-HD Trucks Used for Super Service Ride Master Trucks
Upgrade to extended travel with RetroXT 5400B
Upgrade to extended travel with RetroXT 5400B
Upgrade to extended travel with RetroXT 4500
Upgrade to extended travel with RetroXT 5400B
Upgrade to extended travel with RetroXT 5400C
Standard Travel—Metal Capped,Extended Travel—RetroXT 4500,
5400B, 5400C
Setup is at 5-1/16” when top of cage is aligned at lateral center of top notch.
Extended Travel—CCB
Setup is at 5-1/16” when top of cage is aligned with bottom of cap cutout.
Extended Travel—Metal Capped Retrofit, LP, SP
Setup is at 11/16” when bottom edge of cap is aligned with base step.
Extended Travel—Metal Capped LPC
Setup is at 11/16” when cap step is aligned with top of base.
Method 1 Method 2 Method 3
For field inspection criteria, refer to Rule 62 in the AAR Field Manual.
RetroXT LP Drop−In RetroXT LPCRetroXT SP Drop−In
tel. 412.771.7300 www.stucki.com
Wedge Style RetroXT LP, SP, and LPC CSB and SSB
Stucki Extended Travel—Metal Capped Retrofit
RetroXT 5400B RetroXT 5400CRetroXT 4500
Nominal11/16"
Tolerance±1/16"
Nominal3/4"
Tolerance±1/16"
Field Setup HeightShop Setup Height
RetroXT LPC (Measurement Method 1)
New Nonmetallic LinerMetal or Used Nonmetallic Liner
11/16"Nominal
±1/8"Tolerance
Nominal11/16"
Tolerance±1/16"
Nominal3/4"
Tolerance±1/16"
RetroXT SP and LP (Measurement Method 2)
Shop Setup Height Field Setup Height
Metal or Used Nonmetallic Liner New Nonmetallic Liner
11/16"Nominal
±1/8"Tolerance
Nominal5-1/16"
Tolerance±1/16"
Nominal5-1/8"
Tolerance±1/16"
All Remaining Side Bearings (Measurement Method 3)
Shop Setup Height Field Setup Height
Metal LinerElastomeric Liner or Lube Disc
5-1/16"Nominal
±1/8"Tolerance
Model SSB® Model CSB® Model CCB HydraShox™Gold Series
HS-7-100 HydraShox™ Platinum Series
RFE-16 RFE-18 RFE-26 RFE-41 RFE-53
Note: To order cage or side bearings, state Model Name + Preload + XT
2600 Neville Road • Pittsburgh, PA 15225 • tel. 412.771.7300 • fax 412.771.7308 • [email protected] For more information, refer to the A. Stucki Co. Product Guide. www.stucki.com Rev. 2 - 1/08
Ride Control and Super Service Ride Control are federally registered trade marks of ASF-Keystone, Inc. Barber is a federally registered trade mark of Barber, Inc. | Using any other manufacturer’s parts on A. Stucki Company products will void all warranties.
Using any other manufacturer’s parts on A. Stucki Company products will void all warranties.