Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
1
inoBEAM Delivery pumps
Delivery pumps for efficient spraying and application of liquid and paste-like materials.
INOTEC GmbHWe make your construction site easier!
2
Delivery pumps make your work easier!
3
Benefits at a glance• Lightweight, small and handy • For liquid and paste-like materials• Extremely efficient peristaltic pump technology • Simple operation • Very fast cleaning and maintenance• Continuously variable quantity control• Suitable for dry running• Detachable plastic material hopper• Forward and reverse running• Can be combined with large containers (drum)
Basic moduleItem no. 10000080-008
Scope of deliveryinoBEAM M8:• Rack made from stainless steel• Plastic material hopper• Gear motor• Peristaltic pump unit• Electric control system with 3 m connecting cable• Operating instructions
inoBEAM M8 Plaster SetItem no. 10040770
Scope of deliveryAs with the basic module (item no. 10000080-008)Plus:• 10 m combined material hose with a diameter of 1”• Spray pipe with nozzles (4, 5, 6, 8, 10, 13 mm)• Remote control cable, 16 m• Cover for material hopper
Accessories from page 8
inoBEAM M8The handy 230 V peristaltic delivery pump for liquid and paste-like materials
Technical dataMax. operating pressure 15 bar
Operating voltage 230 V / 16 A / 50 Hz
Motor rating 0.55 kW
Delivery rate 0 – 8 l/min
Delivery range Up to 30 m*
Delivery height Up to 20 m*
Material hopper 30 l
Dimensions 600 x 230 x 750mm(L x W x H)
Weight approx. 28kg
* Depending on the material consistency
The inoBEAM M8 delivery pump handles materials based on the “walk principle”. A flexible rubber disc pushes the material to be conveyed through the pump housing and into the material hose. This delivers a considerable benefit: less frictional heat is gen-erated and the material is conveyed very efficiently. The very fast cleaning and simple maintenance processes keep operating costs low and save time.
Areas of applicationLiquid and paste-like materials, paints, plasters, fillers and reinforcing compounds, bitumen and much more. (See table on page 7)
inoBEAM M8 Bitumen SetItem no. 10042326
Scope of deliveryAs with the basic module (item no. 10000080-008)Plus:• 10 m combined material hose with a diameter of 1”• Angled spray head with GEKA coupling ink. 8 mm nozzle• Remote control cable, 16 m• Cover for material hopper
4
inoBEAM F12The versatile 230 V delivery pump for liquid and paste-like materials
The inoBEAM F12 is a compact and versatile 230 V delivery pump. The material hopper can be disassembled without the need for tools. It can be dismantled quickly and easily for cleaning purposes. The handy design and low weight make transporting the device simple.
Areas of application Liquid and paste-like materials, renovation and sealing applications, acoustic coats, fire protection mortar, decorative fine coats, liquid woodchip and much more. (See table on page 7)
Benefits at a glance
• Lightweight, small and handy
• For liquid and paste-like materials
• Continuously variable speed control using potentiometer
• Simple operation
• Simple cleaning and maintenance
• Detachable plastic material hopper
• Up to 3 mm grit size
• Forward and reverse running
Technical dataMax. operating pressure 16 bar
Operating voltage 230 V / 16 A / 50 Hz
Motor rating 1.5 kW (frequency-controlled)
Delivery rate 0 – 12 l/min.
Delivery range up to 30 m*
Delivery height up to 20 m*
Material hopper 50 l
Dimensions 1,450 x 530 x 700 mm(L x W x H)
Weight approx. 65 kg
* Depending on the material consistency
Basic moduleItem no. 10041065
Scope of deliveryinoBEAM F12:• 2 running wheels & 2 steering wheels• Plastic material hopper• Cover for material hopper• Gear motor• Rotor/Stator D 6-3 Eco gold short• Electric control system with 10 m connecting cable• Pump housing made from stainless steel• Mortar pressure gauge• Pump shaft• Assembly spray lubricant• Operating instructions
inoBEAM F12 setItem no. 10041574
Scope of deliveryinoBEAM F12 Set:
As with the basic module (item no. 10041065)
Plus:• 10 m combined material hose with a diameter of 1”• Spray pipe set with nozzles (4, 5, 6, 8, 10, 13 mm)• Remote control cable, 16 m• Tool set
Accessories from page 8
5
Benefits at a glance • For liquid and paste-like materials
• Detachable plastic material hopper
• High delivery rate
• Continuously variable speed control using potentiometer
• Simple operation
Basic moduleItem no. 10041083
Scope of deliveryinoBEAM F30:• Frame• 2 running wheels & 2 steering wheels• Plastic material hopper• Cover for material hopper• Gear motor
Set “D”-F30 for spray applications (18 l / 40 bar) Item no. 10041913*
Set “R”-F30 for floor levelling compounds (50 l / 15 bar) Item no. 10043416*
Set “HP”-F30 for airless spray-on smoothing compounds (8 l / 90 bar) Item no. 10044242*
* Scope of delivery, see accessories
Technical dataMax. operating pressure 40 bar
Operating voltage 230 V / 16 A / 50 Hz
Motor rating 3.0 kW (frequency-controlled)
Delivery rate 2 – 50 l/min.
Delivery range Up to 80 m*
Delivery height Up to 25 m*
Material hopper 50 l
Dimensions 1,450 x 530 x 700 mm(L x W x H)
Weight approx. 85 kg
* Depending on the material consistency
The inoBEAM F30 is a high-performance 230 V deliverypump suitable for a wide range of indoor and outdoor appli-cations. The simple and clear layout of the operating elements make working safe and easy. With the optional sets that are available, the delivery pump can be converted for various fields of application in just a couple of steps. This offers maximum flexibility on your construction site thanks to unlimited areas of application (spraying, adhesion, filling, reinforcing and now also paint spraying, etc.) with an unbeatable price/perfor-mance ratio.
Areas of applicationLiquid and paste-like materials, acoustic finishing coats, liquid woodchip, porous concrete coats, floor levelling compounds and much more. (See table on page 7)
inoBEAM F30The efficient 230 V delivery pump for liquid and paste-like materials
Accessories from page 8
• Switching cabinet• 3 m connecting cable• Pump shaft• Pump housing made from stainless steel• Tool set• Assembly spray lubricant• Operating instructions
6
The inoBEAM F50 is the most powerful 400 V delivery pump suitable for a wide range of indoor andoutdoor applications. Especially suitable for restoration plasters, single-layer sgraffito and concrete repair materials as well as floor levelling compounds or reprofiling mortar.With the optional sets that are available, the delivery pump can be converted for various fields of application in just a couple of steps. This offers maximum flexibility on your construction site thanks to unlimited areas of application (spraying, bonding, filling, reinforcing, etc.).
Areas of applicationPaste-like materials, fine sgraffito, industrial flooring, SPCC mortar, floor filling compounds, floor levelling compounds and much more. (See table on page 7)
Benefits at a glance
• For paste-like materials
• For coarse-particle materials
• Material hopper made of steel
• Very high delivery rate
• Continuously variable speed control using potentiometer
• Simple operation
Technical dataMax. operating pressure 40 bar
Operating voltage 400 V / 32 A / 50 Hz
Motor rating 6.3 kW (frequency-controlled)
Delivery rate 2 – 100 l/min
Delivery range Up to 80 m*
Delivery height Up to 40 m*
Material hopper 70 l
Dimensions approx. 1,200 x 660 x (L x W x H) 750 mm
Weight approx. 130 kg
* Depending on the material consistency
Basic moduleItem no. 10043421
Scope of deliveryinoBEAM F50:• Frame• 4 running wheels• Material hopper made of steel• Gear motor• Switching cabinet• Tool set• Assembly spray lubricant• Operating instructions
Set “D”-F50 for spray applications (22 l / 40 bar) Item no. 10043978
Set “Ü1”-F50 for industrial flooring (100 l / 15 bar) Item no. 10043790*
Set “Ü2”-F50 for floor levelling compounds (100 l / 30 bar) Item no. 10043937*
Set “RS”-F50 for the processing of coarse-grained material up to grit size 8 mm (50 l / 15 bar) Item no. 10043791*
* Scope of delivery, see accessories
Accessories from page 8
inoBEAM F50The most powerful 400 V delivery pump
7
Technical data
inoBEAM M8 inoBEAM F12 inoBEAM F30 inoBEAM F50
Operating pressure max. 15 bar max. 16 bar max. 40 bar** max. 40 bar**
Operating voltage 230 V / 16 A / 50 Hz 230 V / 16 A / 50 Hz 230 V / 16 A / 50 Hz 400 V / 32 A / 50 Hz
Motor rating 0.55 kW 1.5 kW frequency-controlled 3.0 kW, frequency-controlled 6.3 kW frequency-controlled
Delivery rate** 0 - 8 l/min 0 - 12 l/min 2 - 50 l/min 2 - 100 l/min
Delivery range* Up to 30 m Up to 30 m Up to 80 m Up to 80 m
Delivery height* Up to 20 m Up to 20 m Up to 25 m Up to 40 m
Material hopper 30 l 50 l 50 l 70 l
Dimensions 600 x 230 x 1,450 x 530 x 1,450 x 530 x 1,200 x 660 x (L x W x H) 750 mm 700 mm 700 mm 750 mm
Weight approx. 28 kg approx. 65 kg approx. 85 kg approx. 160 kg
Grit size to be processed Up to 3 mm** Up to 3 mm** Up to 6 mm** Up to 8 mm**
* Depending on the material and hose diameter ** Depending on the rotor/stator
Airless spray-on smoothing compounds
With set “HP”
Outdoor / indoor dispersion paint Silicate paint *
With set “HP”
Fine acoustic finishing coatsAcoustic renovation paint
Multi-layer acoustic spray plasters
Cotton plastersConcrete bonderBitumenFloor spattling compoundsFire protection mortarDecorative fine coatsLiquid woodchipFloor levelling compoundsPorous concrete coatsLime-based finishing plastersLime plastersLime cement plastersMineral textured plastersPaste-like textured plastersPlaster primerReprofiling mortarRenovating plaster systemsSPCC MortarSPCC SpatulaSpray-on filling compoundsETICS glue, mineralETICS glue, paste-likeCement pastes, suspensionsCement plasters
* The material can be applied using a machine – treatment with a brush or roller afterwards is possible. It is essential that the information the manufacturer has provided about the material be observed!
Applications inoBEAM M8 inoBEAM F12 inoBEAM F30 inoBEAM F50
8
AccessoriesCombined material hose• For applying, with integrated air hose• Colour: black / yellow• Operating pressure: 20 bar• With GEKA couplings, lockable
Ø
3/4”
1”
1”
1”
Length
10 m
5 m
10 m
15 m
Item no.
10022140
10008344-007
10008344-003
10008344-005
P PPP
P PPP
—
—
—
—
—
—
—
—
Material hose • Colour: black / yellow • Operating pressure: 20 bar • With GEKA coupling, lockable
Ø
1/2”
1”
Length
10 m
10 m
Item no.
10008345-005
10008345-001
PPPP
—
—
—
—
Water/air hose• For universal use, e.g. air, water• GEKA couplings crimped with sleeves on both sidesTechnical data:Max. operating pressure: 20 barTemperature range: -20 up to +90°C
Ø
1/2”
1/2”
1/2”
3/4”
Length
10 m
15 m
20 m
20 m
Item no.
10022000
10022001
10022002
10022011
PPPP
PPPP
PPPP
PPPP
Ultralight hose
- with mortar coupling
- with GEKA coupling
Ø
25 mm
25 mm
Length
10 m
10 m
Item no.
10043874
10043875
—
P—
PP—
P—
Inotec mortar hose• Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof• For an operating pressure of 40 bar with 3 times the reliability• Yellow on the outside: less heat builds up in the event of sun exposure• With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)• With cam levers on the M-pieceTechnical data: Operating pressure: 40 bar,Bursting pressure: 120 bar
Ø
25 mm
25 mm
25 mm
35 mm
35 mm
Length
10 m
15 m
20 m
10 m
20 m
Item no.
10008346-001
10008346-002
10008346-003
10022032
10008346-007
—
—
—
—
—
—
—
—
—
—
PPPPP
PPPPP
Inotec mortar hose• Abrasion-resistant special hose for pumping highly pressurised wet mortar; largely kink-proof• For an operating pressure of 40 bar with 3 times the reliability• Black on the outside• With mortar hose couplings, M-piece and rotating V-piece (only with diameters of 25 mm)• With cam levers on the M-pieceTechnical data: Operating pressure: 40 bar / burst-ing pressure: 120 bar
Ø
40 mm
40 mm
50 mm
50 mm
Length
13.3 m
20 m
13.3 m
20 m
Item no.
10041544
10041545
10008346-010
10008346-011
—
—
—
—
—
—
—
—
PP—
—
PPPP
Reprofiling sprayer
• Reprofiling sprayer 35 V with nozzle pipe 12 mm, connection 35 V-piece
• Nozzle pipe 12 mm
• Nozzle pipe 15 mm
Item no.
10023309
10022789
10022790
—
—
—
—
—
—
PPP
PPP
Flushing hose• For clearing blockages in mortar hoses
Length
10 m
Item no.
10024385 PPP P
230 V / 3 x 2.5 mm2 connecting cable• 16 A Schuko plug and CEE coupling
Length
15 m
Item no.
10015126 — — P —
400 V / 5 x 4 mm² extension cable• 32 A plug and socket
Length
20 m
Item no.
10015201 — — — P
inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
9
230 V 3 x 2.5 mm2 extension cable• 16 A Schuko plug and coupling
Length
10 m
Item no.
10015208 PP — —
3 x 2.5 mm2 cable reel made from impact-resistant plastic• Plastic cable reel with 33 m H07BQ-F3G2,5 cable • Robust, impact-resistant design, all-round roll-over protection• 4 protective contact sockets (splash-proof, with self-closing lids)• Protection class: IP44
Length
33 m
Item no.
10044024 PPP —
Wireless remote control • Wireless remote control, 3-channels, with handheld transmitter, integrated antenna, 24 V Harting connector with LED display• Only for devices with a control voltage of 12-24 V
Item no.
10043315 PPP P
Remote control cable with remote control switch Length
16 m
32 m
Item no.
10042464
10042465
PPPPPPPP
Remote control extension cable without remote control switch• For remote control cable• For remote control switch• For inoCOLL / inoCOLL Pro one-handed gun
Length
16 m
32 m
Item no.
10015210
10042463
PPPPPPPP
Adapter for remote control cable
• m-tec plug– Harting socket
• m-tec socket – Harting plug
Item no.
10015121
10015120
PPPPPPPP
Remote control switch • With 0.2 m cable, indicator light and 4-pin Harting plug
Item no.
10015134 PPP P
Hose holder• For rapidly fixing hoses to the scaffold
Item no.
10018503 PPP P
inoCOLL one-handed gun• For bonding and basecoat mortars• 2 m whip hose with a diameter of 19 mm and an LW 24 mortar connection coupling, suitable for a 25 mm mortar hose• For grit sizes up to 1.5 mm
Item no.
10024144 — — P P
inoCOLL one-handed gun with GEKA coupling• For bonding and basecoat mortars• For grit sizes up to 1.5 mm
Item no.
10024143 PP — —
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
10
inoCOLL PRO one-handed gun • For applying reinforcing mortar and finishing plaster up to 4 mm grit size• Operating pressure: up to 40 bar
Item no.
10041950 — — P P
inoCOLL PRO one-handed gun with GEKA coupling• For bonding and basecoat mortars• For grit sizes up to 4.0 mm
Item no.
10041973 PP — —
Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection• For spraying mineral and paste-like products• With 10 mm nozzle
Item no.
10039322 — — P P
Spray attachment for inoCOLL / PRO one-handed gunwith EWO air connection• For spraying mineral and paste-like products• With 10 mm nozzle
Item no.
10042332 PP — —
“Joint Set” nozzle attachment (10044173) for inoCOLL / PRO One-handed gun, complete – consisting of 6, 9 and 13 mm diame-ter nozzle attachments and a GEKA coupling
Nozzle attachment
Nozzle attachment, complete
Nozzle attachment: 6 mm, ET 3/4”
Nozzle attachment: 9 mm, ET 3/4”
Nozzle attachment: 13 mm, ET 3/4”
Item no.
10044173
10043198
10043199
10043200
PPPP
—
—
—
—
—
—
—
—
—
—
—
—
Short spray pipe in a set with GEKA couplingShort, lightweight spray pipe for spraying paste-like materials. Thanks to the special nozzle geometry, a small compressor (air flow rate from 200 l/min.) is sufficient to achieve a very good spray pattern. The air quantity can be regulated using the integrated mini ball valve.• For grit sizes up to 3 mmScope of delivery:Short spray pipe in a set, including 4 / 5 / 6 / 8 / 10 / 13 mm nozzles, nozzle bit, cleaning brush, in a systainer
Item no.
10039886 PP — —
Small spray pipe in a set with GEKA couplingSmall, lightweight spray pipe for spraying paste-like materials. For grit sizes up to 3 mm. The nozzle geometry require an air output of at least 250 l / min. The air quantity can be regulated using the integrated mini ball valve.Scope of delivery: Small Spray pipe in a set including 4,5 / 6,5 / 8,5 / 10,5 mm, nozzles, nozzle bit, cleaning brush, in a systainer
Art.-Nr.
10012707 PP — —
Paint spray set for inoBEAM M8
Scope of delivery:20 m combination material hose 1/2” with GEKA coupling (lockable),Spray pipe short (10012700), slit nozzle (10024202), in Systainer
Item no.
10044204 P — — —
Spray set for inoBEAM M8for any water-based, unfilled base paints and primers and unfilled anti-poros-ity treatments.
Scope of delivery: Spray lance, fabric hose, plastic case
Item no.
10044183 P — — —
Angled spray head with GEKA coupling• E.g. for spraying bitumen, etc.• Length: 65 cm• 45° angleScope of delivery:Spray head including 8 mm nozzle
Item no.
10039457 PP — —
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
11
inoCOLL PRO one-handed gun • For applying reinforcing mortar and finishing plaster up to 4 mm grit size• Operating pressure: up to 40 bar
Item no.
10041950 — — P P
inoCOLL PRO one-handed gun with GEKA coupling• For bonding and basecoat mortars• For grit sizes up to 4.0 mm
Item no.
10041973 PP — —
Spray attachment for inoCOLL / PRO one-handed gun with GEKA air connection• For spraying mineral and paste-like products• With 10 mm nozzle
Item no.
10039322 — — P P
Spray attachment for inoCOLL / PRO one-handed gunwith EWO air connection• For spraying mineral and paste-like products• With 10 mm nozzle
Item no.
10042332 PP — —
“Joint Set” nozzle attachment (10044173) for inoCOLL / PRO One-handed gun, complete – consisting of 6, 9 and 13 mm diame-ter nozzle attachments and a GEKA coupling
Nozzle attachment
Nozzle attachment, complete
Nozzle attachment: 6 mm, ET 3/4”
Nozzle attachment: 9 mm, ET 3/4”
Nozzle attachment: 13 mm, ET 3/4”
Item no.
10044173
10043198
10043199
10043200
PPPP
—
—
—
—
—
—
—
—
—
—
—
—
Short spray pipe in a set with GEKA couplingShort, lightweight spray pipe for spraying paste-like materials. Thanks to the special nozzle geometry, a small compressor (air flow rate from 200 l/min.) is sufficient to achieve a very good spray pattern. The air quantity can be regulated using the integrated mini ball valve.• For grit sizes up to 3 mmScope of delivery:Short spray pipe in a set, including 4 / 5 / 6 / 8 / 10 / 13 mm nozzles, nozzle bit, cleaning brush, in a systainer
Item no.
10039886 PP — —
Small spray pipe in a set with GEKA couplingSmall, lightweight spray pipe for spraying paste-like materials. For grit sizes up to 3 mm. The nozzle geometry require an air output of at least 250 l / min. The air quantity can be regulated using the integrated mini ball valve.Scope of delivery: Small Spray pipe in a set including 4,5 / 6,5 / 8,5 / 10,5 mm, nozzles, nozzle bit, cleaning brush, in a systainer
Art.-Nr.
10012707 PP — —
Paint spray set for inoBEAM M8
Scope of delivery:20 m combination material hose 1/2” with GEKA coupling (lockable),Spray pipe short (10012700), slit nozzle (10024202), in Systainer
Item no.
10044204 P — — —
Spray set for inoBEAM M8for any water-based, unfilled base paints and primers and unfilled anti-poros-ity treatments.
Scope of delivery: Spray lance, fabric hose, plastic case
Item no.
10044183 P — — —
Angled spray head with GEKA coupling• E.g. for spraying bitumen, etc.• Length: 65 cm• 45° angleScope of delivery:Spray head including 8 mm nozzle
Item no.
10039457 PP — —
Short spray pipe with mortar coupling 25 mmShort, lightweight spray pipe with L24 coupling for spraying paste-like materials. Thanks to the special nozzle geometry, a small compressor (air flow rate from 200 l/min.) is sufficient to achieve a very good spray pattern. The air quantity can be regulated using the integrated mini ball valve.• For grit sizes up to 3 mm / • Suitable for a 25 mm mortar hoseScope of delivery: Short spray pipe with 2 m whip hose (diameter 19 mm), with mortar coupling 25 mm and 2 m air hose with GEKA coupling, without nozzles
Item no.
10039887 — — P P
Nozzles for:- Spray attachment for inoCOLL / PRO one-handed gun (10039322) - Short spray pipe with mortar coupling 25 (10039887)- Angled spray head with GEKA coupling (10039457)- Short spray pipe as a set (10039886)
• Made of stainless steel
* For grit size up to 6 mm
Ø
4 mm
5 mm
6 mm
8 mm
10 mm
13 mm*
Item no.
10039271
10042461
10039220
10039221
10039222
10040941
PPPPPP
PPPPPP
PPPPPP
PPPPPP
Nozzles for spray pipe short in a set (10012707)
• Made of stainless steel
• Slot nozzle (for paint)
Ø
4,5 mm
6,5 mm
8,5 mm
10,5 mm
4,5 mm
Art.-Nr.
10024060
10024062
10024064
10024058
10024202
PPPPP
PPPPP
—
—
—
—
—
—
—
—
—
—
MAI finishing coat device, straight• With 25 mm M-piece coupling• Including a 14 mm jet nozzle
Item no.
10024362 — — P P
Jet nozzle• For MAI finishing coat device
Ø
10 mm
12 mm
14 mm
16 mm
Item no.
10024378
10024379
10024380
10024381
—
—
—
—
—
—
—
—
PPPP
PPPP
Straight finishing coat device• With 25 mm M-piece coupling• incl. 14 mm finishing coat nozzle
Item no.
10024098 — — P P
Finishing coat nozzles• For finishing coat device, item no.: 10024098
Ø
10 mm
12 mm
14 mm
16 mm
Item no.
10024089
10024090
10024091
10024093
—
—
—
—
—
—
—
—
PPPP
PPPP
Plastic material containerMaterial container as an optional attachment for the pump hopper for increasing the container volume from 10 to 50 litres.
Item no.
10044178 — PP —
Cover for material hopper• For protecting the contents of the hopper against impurities• Made from black plastic
Item no.
10041816 — PP —
Bag mangle• For emptying plastic bags with paste-like materials
Item no.
10041971 — PP —
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
12
Straight decorative plaster spraying device• Not including nozzle with 25 mm M-piece coupling• For grit sizes up to 6.0 mm
Item no.
10024246 — — P P
Nozzle for straight decorative plaster spraying device• Made from stainless steel
Ø
8 mm
10 mm
12 mm
Item no.
10024071
10024065
10024066
—
—
—
—
—
—
PPP
PPP
inoBEAM M 8 service systainer• Contains all key wearing parts and accessories such as the diaphragm, conveyor disc, GEKA coupling, seals, etc., for rapid replacement on the construction site
Item no.
10042613 P — — —
Plastic material hopper for inoBEAM M8Material hopper with a capacity of 30 litres
Item no.
10011958 P — — —
Cover for material hopper inoBEAM M8• For protecting the hopper contents from impurities • Made from black plastic
Item no.
10011830 P — — —
Green conveyor disc Item no.
10011858 P — — —
Diaphragm (price per pair) Item no.
10011890 P — — —
GLEITMO silicone paste• 100 g tube• For inoBEAM M8 diaphragm
Item no.
10004505 P — — —
Air quantity controller with EWO couplings• For precisely adjusting the air quantity when spraying. • Is connected between the air hose and spraying device.
Item no.
10017793 PPP P
Connecting coupling for compressors
EWO V-piece on GEKA
Item no.
10022353 PPP P
Reducer coupling• For connecting two mortar hoses or reducing the machine outlet.
35 V-piece -> 25 V-piece
50 V-piece -> 42 V-piece
50 V-piece -> 35 M-piece
42 M-piece -> 35 M-piece
Item no.
10022101
10041187
10022100
10022097
—
—
—
—
—
—
—
—
P—
—
P
PPPP
Plaster piece with GEKA coupling• For cleaning mortar hoses 25 V-piece
35 M-piece
25 M-piece
50 M-piece
42 V-piece
Item no.
10022113
10022114
10022112
10022116
10042213
—
—
—
—
—
—
—
—
—
—
PPP—
P
PPPPP
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
13
Sponge balls (soft version)• For cleaning material / mortar hoses
Ball
Ø
14 mm
20 mm
30 mm
45 mm
60 mm
Hose
Ø
13 mm
19 mm
25 mm
35 mm
40/50 mm
Item no.
10008116-001
10008116-003
10008116-004
10008116-005
10008116-006
PPP—
—
PPP—
—
PPPPP
PPPPP
Sponge balls (firm version)• For cleaning material / mortar hoses
Ball
Ø
30 mm
45 mm
Hose
Ø
25 mm
35 mm
Item no.
10008116-007
10008116-008
P—
P—
PPPP
230 V INOTEC Compact 330 compressorThe compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc. Technical data:Operating pressure: 10 barSuction capacity: 330 l/minOutput: 2.05 kWDimensions (L x W x H): 396 x 473 x 598 mmWeight: 32 kg
Item no.
10034389 PPP P
Connection unit for 2 INOTEC Compact 330 compressorsconsisting of check valve and EWO coupling- 2 x V parts- 1 x M part
Item no.
10019060 PPP P
KAESER 230 V Compressor Premium Car 450/30WThe compact 230 volt compressor is ideal for many applications, such as spraying decorative coatings, plaster or bitumen, for operating compressed air tools, and for painting, etc. Technical data:Operating pressure: 10 barSuction capacity: 450 l/minOutput: 2.2 kWDimensions (L x W x H): 870 x 560 x 590 mmWeight: 86 kg
Item no.
10039227 PPP P
Trolley with 2 plastic wheels for inoBEAM M8 delivery pump Item no.
10030015 P — — —
Set “HP”-F30The inoBEAM F30 delivery pump can be converted into a high-perfor-mance 230 V airless spraying device using an optional set and just a few, easy steps. A delivery rate of 7-8 l/min is achieved with 3.0 kW when processing spray-on filler.Scope of delivery: High-pressure pump SPRAY, high-pressure hose, airlessgun, pressure and suction flange “HP”, pressure control and tie rod “HP”, nozzle holder, nozzle
Item no.
10044242 — — P —
Set “R”-F30 (Rotor/Stator R7-1.5) Ø 115 mm, 50 l/min, 15 bar, e.g., for floor levelling compoundsScope of delivery: Suction flange, pressure flange, mortar pressure gauge, rotor/stator R7-1.5, coupling M part 50 (2” IT), 2 x M16 nuts, 2 x M16 threaded rods (330 mm), 2 x M16 double nuts
Item no.
10043416 — — P —
Set “D”-F30 (Rotor/stator D6-3 Eco gold)Ø 89 mm, 18 l/min, 40 bar, e.g., for spray applicationsScope of delivery: Pressure and suction flange with tension rods, mortar pressure gauge, rotor/stator D6-3 Eco gold
Item no.
10041913 — — P —
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
14
Set “D”-F50 (Rotor/stator D7-2.5 S) Ø 89 mm, 22 l/min, 40 bar, e.g., for spray applicationsScope of delivery: Pressure and suction flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator D7-2.5 S, coupling M part 35 (1 1/2” IT), 2 x M16 collar nuts, 2 x eyebolts
Item no.
10043978 — — — P
Set “Ü1”-F50 (rotor/stator 1R6) Ø = 101 mm, 100 l/min, 15 bar, for e.g. industrial screedsScope of delivery: Suction flange, pressure flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator 1R6, coupling M part 50 (2” IT), 4 x M16 nuts, 2 x M16 threaded rods (90 mm), 2 x M16 double nuts
Item no.
10043790 — — — P
Set “Ü2”-F50 (rotor/stator 2R6)Ø 101 mm, 100 l/min, 30 bar - for e.g. floor levelling compoundScope of delivery: Suction flange, pressure flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator 2R6, coupling M part 50 (2” IT), 2 x eyebolts, 4 x M16 nuts, 2 x M16 threaded rods (270 mm), 2 x M16 double nuts
Item no.
10043937 — — — P
Ser “RS”-F50 (Rotor/stator R7-1.5 with clamping strip) Ø 115 mm, 50 l/min, 15 bar, e.g., for coarse-grained materials, such as sgraffitoScope of delivery: Suction flange, pressure flange, mortar pressure gauge, Rotor/stator R7-1.5 with clamping strip, coupling M part 50 (2” IG)
Item no.
10043791 — — — P
Pump shaft for set “Ü” with Rotex coupling (without sprocket)
Pump shaft for set “D” with Rotex coupling (without sprocket)
Sprocket for Rotex coupling
Item no.
10041876
10043853
10041878
—
—
—
—
—
—
—
—
—
PP
P
Hose mixer for special screedThe material is mixed again by the hose mixer.40 mm hose mixer
35 mm hose mixer
Item no.
10042509
10042648
—
—
—
—
—
—
PP
Static mixers• Prevents/destroys lumps in mortar• Diameter: 35 mm• Length: 200 mm • Including coupling M-piece 35 mm and V-piece 35 mm
Item no.
10042362 — — P P
Rotor 1 R6
Stator 1 R6 (maintenance-free)
Item no.
10041243
10041242
—
—
—
—
—
—
PP
Rotor 2R6
Stator 2R6
Item no.
10044018
10044019
—
—
—
—
—
—
P
PRotor D4-½ output • Head marked in green
Stator D4-½ output (maintenance-free)
Stator D4-½ output, with clamping strip
Stator D4-½ output, soft with clamping strip
Item no.
10022543
10022502
10022501
10022503
—
—
—
—
—
—
—
—
P
—
—
P
P
P
P
—
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
15
Set “D”-F50 (Rotor/stator D7-2.5 S) Ø 89 mm, 22 l/min, 40 bar, e.g., for spray applicationsScope of delivery: Pressure and suction flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator D7-2.5 S, coupling M part 35 (1 1/2” IT), 2 x M16 collar nuts, 2 x eyebolts
Item no.
10043978 — — — P
Set “Ü1”-F50 (rotor/stator 1R6) Ø = 101 mm, 100 l/min, 15 bar, for e.g. industrial screedsScope of delivery: Suction flange, pressure flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator 1R6, coupling M part 50 (2” IT), 4 x M16 nuts, 2 x M16 threaded rods (90 mm), 2 x M16 double nuts
Item no.
10043790 — — — P
Set “Ü2”-F50 (rotor/stator 2R6)Ø 101 mm, 100 l/min, 30 bar - for e.g. floor levelling compoundScope of delivery: Suction flange, pressure flange, mortar pressure gauge, pump shaft with Rotex coupling, rotor/stator 2R6, coupling M part 50 (2” IT), 2 x eyebolts, 4 x M16 nuts, 2 x M16 threaded rods (270 mm), 2 x M16 double nuts
Item no.
10043937 — — — P
Ser “RS”-F50 (Rotor/stator R7-1.5 with clamping strip) Ø 115 mm, 50 l/min, 15 bar, e.g., for coarse-grained materials, such as sgraffitoScope of delivery: Suction flange, pressure flange, mortar pressure gauge, Rotor/stator R7-1.5 with clamping strip, coupling M part 50 (2” IG)
Item no.
10043791 — — — P
Pump shaft for set “Ü” with Rotex coupling (without sprocket)
Pump shaft for set “D” with Rotex coupling (without sprocket)
Sprocket for Rotex coupling
Item no.
10041876
10043853
10041878
—
—
—
—
—
—
—
—
—
PP
P
Hose mixer for special screedThe material is mixed again by the hose mixer.40 mm hose mixer
35 mm hose mixer
Item no.
10042509
10042648
—
—
—
—
—
—
PP
Static mixers• Prevents/destroys lumps in mortar• Diameter: 35 mm• Length: 200 mm • Including coupling M-piece 35 mm and V-piece 35 mm
Item no.
10042362 — — P P
Rotor 1 R6
Stator 1 R6 (maintenance-free)
Item no.
10041243
10041242
—
—
—
—
—
—
PP
Rotor 2R6
Stator 2R6
Item no.
10044018
10044019
—
—
—
—
—
—
P
PRotor D4-½ output • Head marked in green
Stator D4-½ output (maintenance-free)
Stator D4-½ output, with clamping strip
Stator D4-½ output, soft with clamping strip
Item no.
10022543
10022502
10022501
10022503
—
—
—
—
—
—
—
—
P
—
—
P
P
P
P
—
Rotor D6-3 “Eco Gold” • Head marked in gold
Stator D6-3 “Eco Gold”• Without twist protection, colour: gold
Item no.
10022552
10022509
—
—
—
—
P
P
—
—
Rotor D6-3 Eco Gold short
Stator D6-3 Eco Gold short
Item no.
10039343
10040858
—
—
PP
—
—
—
—
Rotor R7-1.5
Stator R7-1.5 (maintenance-free)
Stator R7-1.5 with clamping strip
Item no.
10022887
10022522
10023395
—
—
—
—
—
—
PPP
PPP
Rotor D7-2.5 “S”
Stator D7-2.5 “Mono Plus” (maintenance-free)
Item no.
10022556
10042506
—
—
—
—
P
P
—
—
Rotor D7-2.5 S
Stator D7-2.5 S (maintenance free)
Item no.
10022556
10022515
—
—
—
—
—
—
PP
Rotor D8-1.5 • Head marked in yellow
Stator yellow D8-1.5 (maintenance-free)
Stator yellow D8-1.5 with clamping strip
Item no.
10022562
10022517
10022519
—
—
—
—
—
—
P
P
P
P
P
P
Rotor D8-2 (maintenance-free)
Stator D8-2 (maintenance-free)
Item no.
10022565
10022496
—
—
—
—
—
—
PP
Professional grease gun: 400 ccm cartridges with hand lever press• Hose length: 300 mm (Diameter: 8 mm)• Material: Steel• Good durability, easy handling• Weight: 1.10 kg
Grease cartridges (replacement cartridges) for professional grease gun
Item no.
10026629
10004510
—
—
—
—
P
P
P
PAssembly spray lubricant• For assembling the rotor and stator• 400 ml
Item no.
10004591 — PP P
Accessories inoBEAM F50 inoBEAM F30inoBEAM F12 inoBEAM M8
16 * n
= 4
00 rp
m; m
easu
red
with
wat
er**
Mea
sure
d w
ith w
ater
/ ob
serv
e th
e m
axim
um p
erm
issib
le p
ress
ures
of t
he h
oses
and
oth
er d
owns
tream
com
pone
nts
(gen
eral
ly 40
bar
)**
* no
t in
the
case
of d
eliv
ery
pum
ps!
Ord
erin
g h
otl
ine:
+49
774
1 68
05 6
66 •
ww
w.in
ote
c-g
mb
h.c
om
Overv
iew
of
stato
rs /
roto
rs f
or
mix
ing
an
d d
eli
very
pu
mp
sN
ame
Item
no.
sta
tor
Item
no.
roto
rTw
istpr
otec
tion
Phot
o De
liver
y
outp
ut *
max
. op
erat
ing
pr
essu
re *
*
Ø
mm
Le
ngth
m
m
G
rit
m
mFi
nish
ing
plas
ter
Gyp
sum
plas
ter
Ligh
tpl
aste
rBa
sepl
aste
rSc
ratc
hpl
aste
rAd
hesiv
em
orta
r
Rest
o -ra
tion
plas
ter
Fille
r(p
last
er)
Floo
r sc
reed
Thin
co
at-
ing
Mac
hin
ery
D4-
1/4
Ou
tpu
t (m
ain
-te
nan
ce f
ree)
1002
2524
1002
2534
ü7
l/min
40 b
ar89
270
3ü
——
——
ü—
ü—
ü40
0 V
mix
ing
and
deliv
ery
pum
ps
D4-
1/2
ou
tpu
t w
ith
cla
mp
ing
st
rip
10
0225
01
With
out a
ttach
-m
ent p
oint
s: 10
0225
43
St
ainl
ess
stee
l:
1002
2544
With
atta
ch-
men
t poi
nts,
fo
r afte
r mix
ers:
1002
2546
ü13
l/m
in40
bar
8927
04
ü—
——
—ü
üü
—ü
400
V m
ixin
g an
d de
liver
y pu
mps
D4-
1/2
Ou
tpu
t (m
aint
enan
ce fr
ee)
1002
2502
ü13
l/m
in40
bar
8927
02.
5ü
——
——
üü
ü—
ü40
0 V
mix
ing
and
deliv
ery
pum
ps
D4-
1/2
ou
tpu
t “s
oft
”, w
ith
cl
amp
ing
str
ip10
0225
0310
0225
43ü
12 l/
min
20 b
ar89
270
3ü
——
——
üü
ü—
ü23
0 V
mix
ing
and
deliv
ery
pum
ps
D6-
3 “E
co-
Go
ld”
(mai
nte
-n
ance
-fre
e)10
0225
0910
0225
52—
18 l/
min
30 b
ar89
270
3ü
—ü
ü—
üü
üü
ü23
0 V
mix
ing
and
deliv
ery
pum
ps
D6-
3 “E
co
Go
ld”
hal
f le
ng
th (
mai
nte
-n
ance
fre
e)
1004
0858
1003
9343
—17
l/m
in15
bar
8914
03
ü—
——
ü—
——
—ü
Onl
y fo
r del
iver
y pu
mp
inoB
EAM
F12
R7-
1.5
(mai
nte
-n
ance
-fre
e)10
0225
2210
0228
87ü
50 l/
min
15 b
ar11
527
06
——
——
——
——
ü—
230
/ 400
V
Mix
ing
and
deliv
ery
pu
mps
R7-
1.5
wit
h
clam
pin
g s
trip
1002
3395
1002
2887
ü50
l/m
in15
bar
115
270
8—
——
——
——
—ü
—23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D7-
2.5
Mo
no
Plu
s (m
ain
ten
ance
fr
ee)
1004
2506
1002
2556
ü20
l/m
in40
bar
8927
05
üü
üü
—ü
üü
üü
230
/ 400
V
Mix
ing
and
deliv
ery
pu
mps
D7-
2.5
S (m
ain
-te
nan
ce f
ree)
1002
2515
1002
2556
ü22
l/m
in40
bar
8927
05
ü—
üü
üü
üü
üü
400
V de
liver
y pu
mps
1R6
1004
1242
1004
1243
ü10
0 l/m
in15
bar
101
360
5—
——
——
——
—ü
—40
0 V
deliv
ery
pum
ps
2R6
1004
4019
1004
4019
ü10
0 l/m
in30
bar
101
540
5—
——
——
——
—ü
—40
0 V
deliv
ery
pum
ps
D8-
1.5
wit
h
clam
pin
g s
trip
1002
2519
With
out
atta
chm
ent
poin
ts:
1002
2562
W
ith
atta
chm
ent
poin
ts,
for
afte
r m
ixer
s:
1002
2563
ü33
l/m
in20
bar
89
270
6ü
——
—ü
—ü
—ü
ü23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D8-
1.5
(mai
nte
-n
ance
-fre
e)
10
0225
17ü
33 l/
min
20 b
ar89
270
5ü
——
—ü
—ü
—ü
ü23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D8-
2 (m
ain
te-
nan
ce-f
ree)
10
0224
9610
0225
65ü
33 l/
min
30 b
ar89
270
5ü
——
—ü
—ü
—ü
ü40
0 V
mix
ing
and
deliv
ery
pum
ps
17
Nam
eIte
m n
o. s
tato
rIte
m n
o. ro
tor
Twist
prot
ectio
nPh
oto
Deliv
ery
ou
tput
*
max
. op
erat
ing
pr
essu
re *
*
Ø
mm
Le
ngth
m
m
G
rit
m
mFi
nish
ing
plas
ter
Gyp
sum
plas
ter
Ligh
tpl
aste
rBa
sepl
aste
rSc
ratc
hpl
aste
rAd
hesiv
em
orta
r
Rest
o -ra
tion
plas
ter
Fille
r(p
last
er)
Floo
r sc
reed
Thin
co
at-
ing
Mac
hin
ery
D4-
1/4
Ou
tpu
t (m
ain
-te
nan
ce f
ree)
1002
2524
1002
2534
ü7
l/min
40 b
ar89
270
3ü
——
——
ü—
ü—
ü40
0 V
mix
ing
and
deliv
ery
pum
ps
D4-
1/2
ou
tpu
t w
ith
cla
mp
ing
st
rip
10
0225
01
With
out a
ttach
-m
ent p
oint
s: 10
0225
43
St
ainl
ess
stee
l:
1002
2544
With
atta
ch-
men
t poi
nts,
fo
r afte
r mix
ers:
1002
2546
ü13
l/m
in40
bar
8927
04
ü—
——
—ü
üü
—ü
400
V m
ixin
g an
d de
liver
y pu
mps
D4-
1/2
Ou
tpu
t (m
aint
enan
ce fr
ee)
1002
2502
ü13
l/m
in40
bar
8927
02.
5ü
——
——
üü
ü—
ü40
0 V
mix
ing
and
deliv
ery
pum
ps
D4-
1/2
ou
tpu
t “s
oft
”, w
ith
cl
amp
ing
str
ip10
0225
0310
0225
43ü
12 l/
min
20 b
ar89
270
3ü
——
——
üü
ü—
ü23
0 V
mix
ing
and
deliv
ery
pum
ps
D6-
3 “E
co-
Go
ld”
(mai
nte
-n
ance
-fre
e)10
0225
0910
0225
52—
18 l/
min
30 b
ar89
270
3ü
—ü
ü—
üü
üü
ü23
0 V
mix
ing
and
deliv
ery
pum
ps
D6-
3 “E
co
Go
ld”
hal
f le
ng
th (
mai
nte
-n
ance
fre
e)
1004
0858
1003
9343
—17
l/m
in15
bar
8914
03
ü—
——
ü—
——
—ü
Onl
y fo
r del
iver
y pu
mp
inoB
EAM
F12
R7-
1.5
(mai
nte
-n
ance
-fre
e)10
0225
2210
0228
87ü
50 l/
min
15 b
ar11
527
06
——
——
——
——
ü—
230
/ 400
V
Mix
ing
and
deliv
ery
pu
mps
R7-
1.5
wit
h
clam
pin
g s
trip
1002
3395
1002
2887
ü50
l/m
in15
bar
115
270
8—
——
——
——
—ü
—23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D7-
2.5
Mo
no
Plu
s (m
ain
ten
ance
fr
ee)
1004
2506
1002
2556
ü20
l/m
in40
bar
8927
05
üü
üü
—ü
üü
üü
230
/ 400
V
Mix
ing
and
deliv
ery
pu
mps
D7-
2.5
S (m
ain
-te
nan
ce f
ree)
1002
2515
1002
2556
ü22
l/m
in40
bar
8927
05
ü—
üü
üü
üü
üü
400
V de
liver
y pu
mps
1R6
1004
1242
1004
1243
ü10
0 l/m
in15
bar
101
360
5—
——
——
——
—ü
—40
0 V
deliv
ery
pum
ps
2R6
1004
4019
1004
4019
ü10
0 l/m
in30
bar
101
540
5—
——
——
——
—ü
—40
0 V
deliv
ery
pum
ps
D8-
1.5
wit
h
clam
pin
g s
trip
1002
2519
With
out
atta
chm
ent
poin
ts:
1002
2562
W
ith
atta
chm
ent
poin
ts,
for
afte
r m
ixer
s:
1002
2563
ü33
l/m
in20
bar
89
270
6ü
——
—ü
—ü
—ü
ü23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D8-
1.5
(mai
nte
-n
ance
-fre
e)
10
0225
17ü
33 l/
min
20 b
ar89
270
5ü
——
—ü
—ü
—ü
ü23
0 / 4
00 V
M
ixin
g an
d de
liver
y
pum
ps
D8-
2 (m
ain
te-
nan
ce-f
ree)
10
0224
9610
0225
65ü
33 l/
min
30 b
ar89
270
5ü
——
—ü
—ü
—ü
ü40
0 V
mix
ing
and
deliv
ery
pum
ps ServiceServices from INOTEC
Silo technology functional and return testing
• Visual inspection
• Checklist-based inspection
• Emptying residual quantities in agreement with the customer
• Checking and, if necessary, replacing mechanical and electrical components
• Checking and, if necessary, replacing the water fitting
• Drawing up a test log and, if necessary, DGUV V3 testing
• Testing mobile equipment pursuant to the Ordinance on Industrial Health and Safety VDE 0701-0702
• Extensive visual inspection
• Measuring and determining the permissible values
• Separating work equipment with safety defects and
discussing how to proceed with the customer
• Attaching the inspection plate if the inspection has been passed
• Drawing up a legally binding test report
• Defining the inspection intervals with the customer
• Making an inventory of the work equipment, if requested
• Customer fault reporting
• Providing support over the phone during the troubleshooting process, or if necessary deploying a service technician
• Service technician travels to the construction site with the service vehicle
• Rectifying faults, if this can be done on the construction site
• Creating assembly certificates with the following information: machine / travel time / kilometres / fault description /
record of the spare parts / date / signature
Silo maintenance
Electrotechnical BGV A3 testing (DGUV V3)
Construction site applications
18
• Visual inspection and cleaning• Resetting / adjusting, lubricating and preserving• Replenishing or replacing the operating fluids• Replacing wearing parts (e.g. filters, seals, etc.) as scheduled,
if their expected service life is clearly sooner than the next main-tenance interval.
• Recording, procuring and replacing wearing parts• Should it be determined during the maintenance process that
parts are defective, the customer is contacted and an agreement reached on how to proceed. If the customer would like a repair, they are sent a cost estimate. The parts are then procured and replaced accordingly.
• Finally, functional testing and, upon customer request, DGUV V3 testing are performed.
• Extensive visual inspection• Testing to ensure safe working conditions• Visual inspection pursuant to BGV D 15 on devices up to 500 bar• Electrically testing the devices pursuant to VDE 701-702• Making an inventory of the work equipment, if requested
• Checking• Recording the parts to be replaced• Sending a cost estimate to the customerIf the customer decides to have the repair work carried out:• Procuring the parts• Replacing the parts • Functional testing and DGUV V3 testing, if necessary If the customer decides not to have the repair work carried out:• Assuming the costs incurred with the cost estimate
Maintenance of third-party and our own devices
Repairs
UVV testing
• Explaining the machine technology• Offering advice on potential uses and applications• Explaining the various machine functions• Safety notices• Practical tips• Maintenance notices• Rectifying faults
Training courses and commissioning
Rental fleetDon’t buy, rent!
Continuousmixers
Delivery pumps
Smallsilo*
* with integrated 400 V continuous mixer and 400 V delivery pump
Airless devices
Mixing pumps
Don’t buy, rent!
Do you need a mixing pump or another machine for one-off
use on your construction site?Would you like to purchase a
machine but check the efficiency and performance
first?
Then you’re in the right place with the INOTEC machine rental fleet !
Give us a call.We would be happy to provide you with a quote.
2020
LocationsYour sales partner (English language)
INOTEC GmbH(Headquarter)Daimlerstraße 9-1179761 Waldshut-TiengenGermanyPhone +49 7741 / 6805 675Fax +49 7741 / 6805 665E-Mail: [email protected]
Wherever you are, we’re there, too.
21
Compressed air / compressors
INOTEC GmbH • Daimlerstraße 9-11 • D-79761 Waldshut-Tiengen • Tel.: +49 77 41 / 68 05-0 • www.inotec-gmbh.com
Delivery pumps Mixing pumps Mixers Delivery systems
OWC technology
Silo technology
Airless devices Cutters Grinders One-handed guns
Power tools / electrical appliances
Waste watersystems
Tillage Accessories &spare parts
Product range
Heaters / air dehumidifiers / high-pressure
cleaners