N.K Industries Manufacturer Range Of Injectable Dry Powder Filling Machine With Rubber Stoppering For Dosing Sterile Powder In Vials And Bottles.More information can be obtain at http://www.nkcapingmachine.com/product/automatic-double-head-injectable-dry-powder-filling-machine.html
Citation preview
*http://www.nkcapingmachine.com/State of Art Injectable Dry
Powder Filling MachineFor More information About Injectable Dry
Powder Filling machine
The injectable dry powder filling machine also known as micro
dosing powder filling machine & they found their extensive used
in injectable section of pharmaceutical industries where They are
used for the dosing of injectable powders into vials. The powders
are filled into Glass Vial using a unique vacuum -pressure dosing
system. After that, the glass vials are sealed with a rubber
stopper.These series of micro dosing injectable dry powder filling
machine can fill from 50 mg to 6 grams powder in vial.
*Please Visit :http://www.nkcapingmachine.com/
1. Significance of Injectable Dry Powder Filling Machine
*2. Different model of Injectable dry powder filling
machinePlease Visit :http://www.nkcapingmachine.com/
Single wheel Injectable dry powder filling machine Output : 120
Vials per minute Double wheel Injectable dry powder filling machine
Output : 240 Vials per minute
*3. Salient Features of Injectable Dry powder filling
machineCompact footprint where different modules like turntables,
filling and rubber stoppering are assembled as one unit with
minimum space requirement.Entire transmission of machine is helical
gear driven, which impart long and trouble free operation.CGMP
Design.Highly precise powder dosing system based on Vacuum
-pressure.Simple, fast and repeatable changeover.Positive vial
transport system i.e. vial separator guide vials through module
like filling, stoppering ensuring they remain upright during
transport.Parts come in Contact with Sterile Powder & Rubber
stoppers are of AISI 316L.Please Visit
:http://www.nkcapingmachine.com/
*3.1 Salient Features of Injectable Dry powder filling
machineMultiple dosing of injectable / sterile powder or changeover
of container size and different fill size is possible by just
changing the vial separator or size of the piston respectivelyNO
VIAL NO FILL scheme eliminates wastage of costly Powder.Special
delrin conveyor belt to avoid sticking of vial on conveyor.All
electronics are of CE Certified.Autonomous pneumatic circuit i.e.
Vacuum and pressure circuit.Vacuum Filter of 10 micron and Air
filter of 2 micron.The electrical system of the equipment is being
housed as per cGMP and cGEP standards with adequate safetyDigital
Vacuum and pressure switch for monitoring vacuum and Air.
Please Visit :http://www.nkcapingmachine.com/
*4. How does these machine works:The Injectable dry Powder
Filling Machine with rubber stopper unit is having vari-speed S.S.
Slat chain Conveyor with optional Turn Table at in-feed &
out-feed.When the machine starts Vials are feed from Turn Table.
Product wheel will separate the vials, Powder is comes from the
Hopper, Suck by Filling wheel & then fill in to vial by piston
assembly fitted in Filling Wheel.Now, filled vials are travel to
Stopping Station, Rubber stopper are comes from the hopper by chute
one by one with the help of vibratory system. Rubber stopper puts
on vials & press wheel are press the stopper on vials. Now,
Filled & Stopper vials are goes to discharge endPlease Visit
:http://www.nkcapingmachine.com/
ParticularSpecificationType of MachineAutomatic single head
injectable dry powder filling machineAutomatic Double head
injectable dry powder filling machineFilling Speed120 Vials/minute
based on 5-10ml vial for Single Dosage (Depending up on size/types
of vial & powder density)240 Vials/minute based on 5-10ml vial
for Single Dosage (Depending up on size/types of vial & powder
density)DesignLeft to RightLeft to RightDosage50 mg to 1.5 grams.
Single Dose (with Change Parts) 1.5 grams to 6 grams. Double,
Triple and Four Doses. Fill range depending upon vial opening and
bulk density of powder. Under controlled level of Humidity (i.e.
25%)50 mg to 1.5 grams. Single Dose (with Change Parts) 1.5 grams
to 6 grams. Double, Triple and Four Doses. Fill range depending
upon vial mouth diameter and bulk density of powder. Under
controlled level of Humidity (i.e. 25%)Dosing wheelOneTwoDosing
port / Wheel8 Nos8 NosFill Accuracy2% depending upon consistency
and uniformity of bulk density of injectable powder2% depending
upon consistency and uniformity of bulk density of injectable
powderProduct Conveyor50 mm (2") wide delrin conveyor50 mm (2")
wide delrin conveyorPowder SuctionThrough VacuumThrough
VacuumPowder DeliveredThrough Air/Nitrogen (Customer to
Provide)Through Air/Nitrogen (Customer to Provide)Stopper
DeliveredThrough Vibratory Bowl & ChuteThrough Vibratory Bowl
& ChuteMachine Dimension 1830 (mm) X 915 (mm) X 1600 (mm)2100
(L) x 1170 (W) X 1600 (H)
