[email protected] Product Information Presentation

[email protected] www.verpa-senco.com

SENCO CONCRETE PINNERS

Product Information Presentation


GENERAL

General information

What fastener to use in what concrete:

2

Thickness of Material

+ Penetration Depth

= Fastener Length


GENERAL

Cubical pressure

Cube of 150x150x150 mm Tested until it breaks to meausure

strength 2nd number in the concrete class

C16/20 A cube is stronger than a cilinder, there

for a smaller object is used.

3


GENERAL

Cylindrical pressure

Cilinder of 150x300 mm Tested until it breaks to meausure

strength 1st number in the concrete class

C16/20 A cylinder is weaker than a cube.

4


GENERAL

What fastener to use in what concrete

In steel structure beams (max 650 N/mm2): always use premium pins.

Max penetration depth = 6.5 mm

5

Thickness of Material (Examples)Concrete

ClassRecommended

Penetration Depth 1mm Steel Stud 3mm Steel Stud 10mm Wood

C16/20 25-28mm 25 / 32 32 38

C20/25 20-22mm 22 25 32

C25/30 15-20mm 19 19 / 22 25 / 32

C30/37 15-18mm 19 19 / 22 25

C40/50 13-16mm 15 19 / 22 25

C50/60 12-15mm 15 15 22 / 25

Premium pins advised


GENERAL

Fastener range various concrete classes

6

C12/15 C16/20 C20/25 C25/30 C28/35 C30/37 C35/45 C40/50 C50/600

5

10

15

20

25

30

35

min

max

Rec

om

men

ded

pen

etra

tio

n d

epth


PULL OUT AND TENSION

7


TO KEEP IN MIND

On site concreting can lead to more pebble-stones on the bottom than on the top side.

In such a case, on the ceiling side you need premium pins while on the floor side to can use regular pins.

8


TO KEEP IN MIND

9

In soft concrete the scoring rate is high. A normal pin is advised.

In hard concrete the nail can either bent or deform. This has an influance on the scoring rate. Therefor the premium pin is advised for usage in hard concrete.


TOOLS

SAP40XPSteel/Concrete Pinner 8 bar! Unique tool in the market Lightweight Trigger- and bottomfire Long thin nose 7 nail lengths

Normal and premium

10

Net weight: 3,2 kgNail capacity: 42 pinsDrive power: 90 JOperating press.: 5,5 – 8,3 bar

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mm


TOOLS

SGP40Steel/Concrete Pinner Cordless convenience Comfort grip Long thin nose 7 nail lengths

Normal and Premium

High voltage ignition

11

Net weight: 4 kgNail capacity: 42 pinsDrive power: 90 JDrive time: 2 shots/secondBattery capacity: 5200 shots

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mmFuel cell: GC0012


TOOLS

SGP40S (2nd generation): Short Magazine

(22 pins fitting the magazine) Block Out System Magazine “Quick Release” Depth of Drive Control

FIRST toolless “step free” DOD Control on a Concrete Pinner

Easy-Nail-Clear Magazine Magazine “Quick Release”

Optional long magazine

12

Net weight: 3,9 kgNail capacity: 22 pinsDrive power: 90 JDrive time: 2 shots/secondBattery capacity: 5200 shots

Fastener range: Collated pinsDiameter: 2,6 – 3,0 mmFastener length: 15 – 40 mmFuel cell: GC0012INTRODUCTIO

N

Q1/2012


Regular concrete pins 7 nail lengths

(15, 19, 22, 25, 32, 38, 40 mm)5 micron zinc, like nails

Premium pins (Hardened pins for hard concrete) 7 nail lengths

(15, 19, 22, 25, 32, 38, 40 mm) 5 micron zinc, like nails

FASTENERS

13


Fuel cells Single cell GC0012

1.300 shots, 80 ml

Premium fuel cell PC1274 1.300 shots, 80 ml, works from -15°C

FUEL CELLS

14


Fuel cells Blisterpack PC1254

750 shots, 2x40 ml + adaptor

FUEL CELLS

15


Car adaptor PC1196 12Vfor charging you batteries in the car

Gas tool cleaning kit For keeping your tool in perfect condition

ACCESSORIES

16


CERTIFICATES?

17

There is no specific standard for concrete fixing.

Only test certificates of competetion exist.


GAS TOOLS

18

Brand SENCO SENCO SPIT POWERS/ MAX HILTI

Model no. SGP40 SGP40S/L PULSA 700P C3 - 55010 GX120

Drive Power 90J 90J 100J 90J 100J

Pin Length Range 15- 40 mm 15- 40 mm 15- 40 mm 15- 40 mm 15- 40 mm

Actuation Type Full Sequential Full Sequential Full Sequential Full Sequential

Pin Head Type Round Head Round Head Round Head Round Head Round Head

Pin Shank Types Straight and Step Straight and Step Straight and Step Straight and Step Straight and Step

Magazine Capacity 42 pins 22 / 42pins 20 pins 42 pins 40 pins

Drives per Fuel Cell 1200 1200 650 1200 750

Fuelcell Composition Propylene Butane Propylene Butane - MAPP Formulation Propylene Isobutane

Fuel LubricationSynthetic

(Propylene Glycol)Synthetic

(Propylene Glycol) - - -

Net Fuel per Cell 40 gr/80ml 40 gr/80ml 20gr/40ml 34gr/68ml 34gr/68ml

Dimensions Fuelcell 165 mm 165 mm 115 mm 150 mm

Lowest Operating Temp. - 7°C - 7°C - 11°C - 11°C

Battery Type Ni- MH 6V Ni- MH 6V NiCD 6V 600mAh Ni- MHDisposable - 2AA Electric ignotion

Batteries 2 2 2 2 -

Drives per Charge 5200 5200 1500 5700 50000

Charge Time 2 Hours 2 Hours 1 Hour -

Max Cycle Rate 2 Shots/second 2 Shots/second 2 Shots/second 2 Shots/second -

Tool Weight 4 3,9 3.6kg - 3.8kg

Dimensions 458x139x460 458x138x340 383x295x100 mm - 432x394x133 mm

Warranty 2 Year Limited 2 Year Limited - - 2 Year


NAIL COMPARISON

19

Overview Senco concrete pins as an alternative for Paslode:

SENCO PINS PASLODE PINS

- C6

Regular Pins SC6

Premium Pins HC6


APPLICATIONS

20

Metal(stud) on steel


APPLICATIONS

21

Metal on steel


APPLICATIONS

22

Wood on concrete

In concrete minimum distance from the edge is > 76,2 mm.

Minimum distance betweennails > 102 mm.


APPLICATIONS

23

Metal(stud) on concrete


APPLICATIONS

24

Metal on stone


WASHER HOLDER

For fastening single shot attachementsPins can fix several attachements like:

Washers Metal clips Plastic clips Perfo band

25


APPLICATIONS

26

Metal on brick. When using the attachment and a washer, the metal profile is still adjustable to make it vertical aligned. After that, fix the profile in the corners.


APPLICATIONS

27


APPLICATIONS

28

Plastic on concrete.


AIRCONDITIONING APPLICATION

29


APPLICATIONS

30

For all these you can of course also use aPneumatic version.


WHAT CAN HAPPEN?

31

Nail not deep enough- Nail too long- DOD setting not correct (SGP40S/L)- Increase pressure (SAP40)

Nail too deep- Nail too short- DOD setting not correct (SGP40S/L)- Reduce pressure (SAP40)


WHAT CAN HAPPEN?

32

Nail bends- Hard concrete / big pebble stones- Steel reinforcement direct under surface- Hard surface (steel)

Nail not deep enough in steel- Steel too hard


WHAT CAN HAPPEN?

33

Nail won’t stay in material- Base material not thick enough

(> 5mm)

Nail breaks- Base material too hard- Nail too long


FAQ’s

34

Q Fit the Senco pins in other toolsA Yes, they fit (except for Hilti or unknown brands)

Q Fit Senco gas in other toolsA Yes, it fits (PC1254 is universal), gas fuel is lubricant and gives no negative result

(even more shots are possible)

Q Which nail to be used for which applicationA Use the table (advice, always test on site)

Q What service needs to be done on the tools?A Tool needs to be proper managed, and needs

cleaning (interval depending on use)

Documents

[email protected] Product Information Presentation