7/29/2019 Informe Bus de Facultad Ing

1/3

TECHNICAL SPECIFICATIONS UMSA BUS NISSAN CONDOR

Bus Specification

Brand Nissan

Model Condor

Frame Iron chassis structure

Steering column Left

Seats 28 + 1

Origin Japanese

Manufacturing Year 2004

Bus Dimensions m

Lenght 10.20 m.

Height 2.86 m.

Width 2,025 m.

Axle distance 3,350 m

Engine Specifications

Engine Model FE6T (220HP)

Air draw in Turbo chraged

Engine size 6890 cm

Power Hp / Rpm 220 HP @ 2800 RPM

Torque Kgm/ Rpm 65 Kgm /1400 RPM

Fuel Injection Direct Fuel Injection

7/29/2019 Informe Bus de Facultad Ing

2/3

Diesel Fuel pump type Lineal Zexel

Compression Ratio Type 1 18:1

Compressiion Pressure 427 PSI @ 200 RPM

Minimum CompressiionPressure 284 PSI- mximum discrepancy 57 PSI

Piston Size Tipo 1 107.825-107.855Intake valve angle 30-3030' (Valve 2930'-30)

Scape intake valve angle 45-4530' (Valve 4430' TO 45)

Ignition Order 1-4-2-6-3-5

Lubrication system Gear pump driving

Oil capacity 16 liters included filter

Alternator 24V 50 A

Starting motor 24V / 4.5 Kw

Weight and tare Kg

Whole weight 7000 kg

Cabin and chassis weight 2395 Kg

Load weight 4605 Kg

Rear axle capacity 5215 Kg

Performance

Maximum Speed140 Km/hr @ 6,500 rpm.(Catalog)

Maximum Slope 31% agle = 17.22

Brakes and Suspension

Front Suspension Spring leafs and shock absorbers

Rear SuspensionSpring leafs, shock absorbers andstabilizer bar

Front Brakes Pads calippers hydropneumatic

Rear brakes Drums hydropneumatic

Parking Brake Mechanical applied on main shaft

Engine Brake Electropneumatic

Transmission Ratio

1st 6.718

2nd 4.031

3rd 2.303

4th 1.443

5th 1.00

6th 0.740

7/29/2019 Informe Bus de Facultad Ing

3/3

Rear 6.121

NISAN CONDOR STATISTICS

Based on information gathered from R.U.A.T. (Bolivian Automor Registration

Center) in Bolvia, there are around 10000 Nissan Condor between trucks and

buses. In La Paz, there are 2600, in Santa Cruz 3000 and 2000 in Cochabamba,

the other 2400 are placed in other major cities.

UNIVERSIDAD MAYOR DE SAN ANDRESMECHANICAL ENGINEERING BACKGROUND

The goal of Mechanical and Electromechanical Engineering is to study, researchand developing, design, install, operate, fabricate, maintain and repair mechanicalequipments and structural systems, mechanical and electromechanicalinstallations, as Power Plants, including steam turbines, gas turbines, waterturbines, wind generators and boilers, among others; machining centers,machinery intended for the formation in cold or hot plastic material or metal parts,robots and automated production lines, industry in general. To participate in thechange of the energy matrix from petrol and diesel to Vehicle Natural Gas as well

as in renewable energy.

http://mecanica.umsa.edu.bo/Index.html

http://mecanica.umsa.edu.bo/Index.htmlhttp://mecanica.umsa.edu.bo/Index.htmlhttp://mecanica.umsa.edu.bo/Index.html