It’s So Easy to Make a Stained Glass Masterpiece!

1 2 3

INSTRUCTIONS

Stained Glass Made Easy - Owl #9296

© Melissa & Doug, LLC, P.O. Box 590, Westport, CT 06881

Melissa & Doug products meet or exceed all U.S. toy testingstandards and pass our high quality requirements.

1 800 284 3948www.MelissaAndDoug.com

We care about your comments. Please call us!

Ensure proper placement by lining up the sticker sheet over the frame before beginning. Repeat as often as necessary during the process.

Peel off the stickers one by one and press them into the matching indentations on the frame. Be sure to press firmly into all corners to ensure stickers are completely adhered to frame. Tip: It’s easy to get the correct stickers in the correct spots by working in sections (tail, leaves, frame) or from one side to the other (right to left or top to bottom).

When all the pieces are in the frame, double-knot one end of the cord, thread it through one of the holes at the top (from back to front), then thread it through the opposite hole (from front to back). Pull it to the desired length, tie a double knot, and cut off any excess cord. Hang it from the suction cup and admire the beautiful stained glass creation!

HELPFUL HINTS• To peel up stickers easily, fold back the plastic sticker

sheet first.• Though some of the stickers look alike, they may not be identical.

Before peeling and pressing, make sure to line them up with the frame and select the correct one.

• Stickers and frame are built to last, but if a sticker becomes dislodged, add a drop of craft glue to stick it down again; craft glue will dry clear.

• To ensure the strongest hold, wipe down the suction cup with a damp cloth before use and make certain that the display surface is clean.