Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 1 / 18 ILPED201468EU-201626
Information leaflet on coming up changes in the European
Pressure Equipment Directive (PED), version 201626
Pressure equipment for the European market
This information leaflet is a common publication of the DNV GL Conformity Assessment Bodies (CAB)
for PED:
- Conformity Assessment Body nr. 0097 UK
- Conformity Assessment Body nr. 2388 The Netherlands
- Conformity Assessment Body nr. 0496 Italy
- Conformity Assessment Body nr. 0575 Norway
- Conformity Assessment Body nr. 2099 Denmark
1 Introduction on new PED 2014/68/EU
The Pressure Equipment Directive (PED 97/23/EC) has been in place since the 29th May 2002. It will be
replaced by PED 2014/68/EU as per 19 July 2016.
Two main factors have enforced the new PED
The basis for the determination of fluid group (1 or 2) in PED Article 9 (i.e. Directive
67/548/EEC) has been replaced by a new Classification, Labelling and Packaging Regulation as
per 1st June 2015.
The “New Legal Framework:” This is a larger initiative by the European Union to bring nine EC
“New Approach” directives into alignment with the “New Legal Framework,” (NLF) which was
adopted in 2008.
The essentials of the current PED will not change
The scope of the PED
The essential safety requirements (annex I)
The categorisation tables (annex II)
The introduction of the new PED will not act in retrospect on certificates issued under the existing PED.
Article 48 states, “Certificates and decisions issued by conformity assessment bodies under Directive
97/23/EC shall be valid under this Directive.”
Not only the PED changes, but also a number of other EU directives has been changed or will change,
due to the new NLF, like:
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 2 / 18 ILPED201468EU-201626
Directive Products Revision
PED 97/23/EC Pressure Equipment New PED (2014/68/EU) in
force 19 July 2016
LD 95/16/EC Lifts New LD (2014/68/EU) in force
20 April 2016
R&TTE 99/5/EC Radio Equipment Replaced by new Radio
Equipment Directive
2014/53/EC in force 13 June
2016
EMC 2004/108/EC Electromagnetic Compatibility New EMC (2014/30/EU) in
force 20 April 2016
LVD 2006/95/EC Low Voltage New LVD (2014/35/EU) in
force 20 April 2016
ATEX 94/9/EC Devices in Explosive Atmosphere New ATEX (2014/34/EU) in
force 20 April 2016
RCD 94/25/EC Recreational Crafts New RCD (2013/53/EU) in
force 18 January 2016
MID 96/98/EU Measurements Instruments New MID (2014/32/EU) in
force 30 October 2016
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 3 / 18 ILPED201468EU-201626
2 New PED Transfer process
The dates below show the two timeline steps for the introduction of the new PED.
1 June 2015 Art.13 of the new PED applies (i.e.CLP)
19 July 2016 Full application of the new PED
All EU member states are required to transpose the new PED 2014/68/EU in their national legislation
before these dates.
3 Changes in brief
3.1 Economic operators The new PED defines the term “economic operators” defining roles and responsibilities as below
Manufacturer – unchanged
Authorized representative – unchanged
Importer - The importer is the economic operator established in the Union who places a product
from a third country on the Union market. The importer must ensure that the manufacturer has
correctly fulfilled his obligations. The importer is not a simple re-seller of products, but has a
key role to play in guaranteeing the compliance of imported products. He is obliged to contact
the manufacturer if the compliance with the PED requirements are doubted. He must mark the
product with his name and address. He must ensure that, while a product is under his
responsibility, storage or transport conditions do not jeopardise its compliance. He must keep a
copy of the EU Declaration of Conformity for 10 years after the product has been placed on the
market and ensure that the technical documentation can be made available to the competent
national authority upon request.
Distributor- juridical/physical person in the EU in the supply chain between any of the above
defined (both Third Country and inside the EU) and the User. Retailers, wholesalers and other
distributors in the supply chain are not required to have a direct agreement with the
manufacturer like the authorised representative. A distributor acquires products for further
distribution either from a manufacturer, from an importer, or from another distributor. However
they have an obligation to be aware of the PED requirements and their responsibility. They
must keep a copy of the manufacturer’s operation manual and the DoC.
The revision of the PED also makes clear that if an importer or distributor places pressure equipment or
assemblies on the market under their own name or trademark, or modifies the equipment in a certain
way, they will be considered manufacturer and will therefore have to take legal responsibility for the
product’s compliance including conformity assessment.
In the Netherlands the Ministry of Social Affairs has decided that a user who assembles pressure
equipment into an assembly is in effect a manufacturer. The ministry has deleted the option for
“samenbouw onder verantwoording van de gebruiker” and the user/manufacturer shall now assemble
his pressure equipment according to the new PED 2014/68/EU, have an Notified Body involved
according to a suitable conformity assessment module and CE mark the assembly.
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 4 / 18 ILPED201468EU-201626
3.2 Conformity assessment modules The designation of some conformity assessment modules have changed ;
The old 97/23/EC The new 2014/68/EU
A1 A2
B1 B (design type)
B B (production type)
C1 C2
For each category, the following modules are available; (modules for a higher category may be used for
lower category equipment)
Category I = Module A
Category II = Modules A2, D1, E1
Category III = Modules B (design type) + D, B (design type) + F, B (production type) + E, B
(production type) + C2, H
Category IV = Modules B (production type) + D, B (production type) + F, G, H1
3.3 Fluid Classification Change The new fluid classification is effected on 1st of June 2015: Chapter 3, Article 13, “Classification of
pressure equipment.” An impact assessment by the European Commission showed that very few
substances would actually change groups in the PED because of this change. The only significant
change concerns the definition of flammable fluids, where the CLP has considered the PED definition.
The below figure from the EC study illustrates the new classification.
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 5 / 18 ILPED201468EU-201626
3.4 Impact on Manufacturers Beside the changes in the Conformity Assessment Modules and fluid classification as described above,
the harmonized standards will increase in importance as solutions to meet the ESR must be stated by
the manufacturer if non-harmonized standards are used. This is expressed in the risk analysis
requirements, which can now be found in Annex III for each module.
As indicated under para 3.1 the user assembling pressure equipment into an integrated whole (pressure
system) will be seen as ‘manufacturer’.
The content of a Declaration of Conformity in Annex IV is also expressed more in detail.
3.5 Impact on Conformity Assessment Bodies The new PED lists Notified Bodies, Recognised Third Party Organisations and User Inspectorates as
‘Conformity Assessment Bodies’ (CAB).
The horizontal requirements on Conformity Assessment Bodies will be implemented in the new PED.
This includes stricter connection to accreditation and more focus on personnel competences at the
Conformity Assessment.
4 Changes in detail
For those interested in a more detailed analysis of the consequences of the introduction of the new PED,
a transfer list in the new PED provides guidance on how the PED 97/23/EC is transferred to the new
PED 2014/68/EU.
In appendix I of this leaflet a table is included showing which new PED articles were covered by the PED
97/23/EC, including a specification of the changes.
Practical changes to the PED are covered in this chapter.
4.1 Changes in fluid categorisation (art 13) as per 1st June 2015 Fluid groups 1 and 2 of PED 97/23/EC will remain. However the base for Group classification will be
changed as the old Dangerous Substances directive – 67/548/EEC - is being replaced by the new CLP
legislation. In practice these changes only concerns some toxic fluids and flammable liquids with a flash
point between 21 and 23 centigrade.
Working Group Pressure Guideline WPG B-01 is providing some guidance as well.
4.2 Module A1 into new PED Module A2 Monitoring of final assessment is to be performed at random intervals.
4.3 Module C1 into new PED Module C2 Same change as for Module A1 into A2.
4.4 Module B into new Module B (production type) Same approach as under the old PED. Requirements to CAB have some modifications.
4.5 Module B1 into new Module B (design type) Most remarkable is that B1 is integrated with module B and the new module B is split up in
B (production type) and B (design type). For the B (design type) certificate, no prototype testing is
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 6 / 18 ILPED201468EU-201626
required, the validity is ten years and the technical file is to be stored another 10 years. Modules B and
B1 are both Type Examinations.
4.6 Other Product modules and Quality System Modules The content of the product modules F and G and the quality modules D, D1, E, E1, H and H1 do not
contain noticeable changes.
4.7 EU Declaration of Conformity The minimum content of the EU Declaration of Conformity (DoC) is described in more detail in Annex IV
of the PED. It is expected that a number of manufacturers should review the content of their DoC and
update accordingly, in order to comply with PED 2014/68/EU requirements. This can be combined with
the introduction of the new PED Directive number on the DoC.
4.8 Nameplate with CE marking The text of the new PED requires the full postal address of the manufacturer to be available on the
nameplate. Please note that our Notified body number has changed to 2388 (see chapter 8) this
number should follow the CE marking.
5 Consequences of the new PED on new and running projects
5.1 New projects New PED art 13 has been in effect as per 1st of June 2015.
5.1.1 Quality System Modules
Applications will be assessed according PED 97/23/EC until July 18th 2016 and, when not finished on
July 19th 2016, will be continued and certified according PED 2014/68/EU. All reporting and
assessments performed under PED 97/23/EC remain valid under PED 2014/68/EU. Issuing a
Declaration of Conformity or Certificate of Conformity according 2014/68/EU before 19 July 2016 is not
allowed.
Issued Certificates according PED 97/23/EC before 19 July 2016 remain valid after this date for PED
2014/68/EU.
5.1.2 Product Modules
Applications will be assessed according PED 97/23/EC until 18 July 2016 and, when not finished on 19
July 2016, will be continued and certified according PED 2014/68/EU. All reporting and assessments
performed under PED 97/23/EC remains valid under PED 2014/68/EU. Issuing Declaration of
Conformity (manufacturer) and Certificate of Conformity (by CAB) according 2014/68/EU before 19 July
2016 is not allowed.
Issued Certificates according PED 97/23/EC (before 19 July 2016) remain valid after this date. Meaning
old and New PED modules can be combined after 19 July 2016, i.e. Module B (97/23/EC) with module D
(2014/68/EU).
5.1.3 Particular Material Appraisals
PMA’s issued before 19 July 2016, based on PED 97/23/EC remain valid under the new PED.
5.1.4 Welding approvals
An approval on WPQR’s and WPQ’s issued before 19 July 2016, based on PED 97/23/EC remain valid
under the new PED.
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 7 / 18 ILPED201468EU-201626
5.2 Ongoing projects on 1 June 2015 and on 19 July 2016
5.2.1 Quality System Modules
Applications will be assessed according PED 97/23/EC until 18 July 2016 and will be continued and
certified according PED 2014/68/EU. All reporting and assessments performed under PED 97/23/EC
remain valid under PED 2014/68/EU. Issuing Declaration of Conformity (manufacturer) and Certificate
of Conformity (by CAB) according 2014/68/EU before 19 July 2016 is not allowed.
Issued Certificates according PED 97/23/EC before 19 July 2016 remain valid after this date.
5.2.2 Product Modules
Applications will be assessed according PED 97/23/EC until 18 July 2016 and will be continued and
certified according PED 2014/68/EU. All reporting and assessments performed under PED 97/23/EC
remains valid under PED 2014/68/EU. Issuing Declaration of Conformity (manufacturer) and Certificate
of Conformity (by CAB) according 2014/68/EU before 19 July 2016 is not allowed.
Issued Certificates according PED 97/23/EC before 19 July 2016 remain valid after this date.
A Manufacturer issuing a Declaration of Conformity after the transfer should make a reference to Art.48
resp. Art.41 if the DoC is based on Certificates issued before the transfer.
6 Appendix on changes New/Old PED
Appendix 1 to this leaflet provides cross references between the new and the old PED.
7 Disclaimer
This leaflet is assembled by DNV GL to provide guidance to clients on the introduction of the
new PED 2014/68/EU. Interpretation of the Directive itself is not the responsibility of DNV GL.
DNV GL does not accept any liability or responsibility for loss or damages resulting from any
use of this document. DNV GL holds all rights to this information leaflet, including copyright.
8 Transition of Conformity Assessment Body number (2388)
By transition of the Notification for PED from Det Norske Veritas B.V. – PCNL to DNV GL
Business Assurance B.V. and the introduction of the new PED 2014/68/EU the Conformity
Assessment Body number will change from 0427 into 2388 as per 19 July 2016.
9 Your contact in DNV GL
For further information please contact the respective DNV GL PED Conformity Assessment
Bodies (CAB) in UK (CAB 0097), Netherlands (CAB 2388), Italy (CAB 0496), Norway (CAB
0575) and Denmark (CAB 2099).
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 8 / 18 ILPED201468EU-201626
For any question or comment or if you do not want to receive information by DNV GL please revert to:
DNV GL Business Assurance B.V.
Conformity Body for Pressure Equipment Directive no. 2388
Zwolseweg 1
NL - 2994 LB Barendrecht
E-mail: [email protected]
Contact person: Chris van den Berg – Technical Manager
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 9 / 18 ILPED201468EU-201626
Appendix I
Pressure Equipment Directive PED 2014/68/EU versus 97/23/EC
2014/68/EU of 15 May 2014 97/23/EC of 29 May 1997 Modification
Art Lid Text Art Lid Text
Preamble THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof, Having regard to the proposal from the European Commission, After transmission of the draft legislative act to the national parliaments, Having regard to the opinion of the European Economic and Social Committee ( 1 ), Acting in accordance with the ordinary legislative procedure ( 2 ), etc, etc
Preamble THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION, Having regard to the Treaty establishing the European Community, and in particular Article 100a thereof, Having regard to the proposals from the Commission (1), Having regard to the Opinion of the Economic and Social Committee (2), Acting in accordance with the procedure laid down in Article 189b of the Treaty (3), in the light of the joint text approved by the Conciliation Committee on 4 February 1997, etc, etc
A number of preambule items are modified. Take notice of them.
CHAPTER 1 - GENERAL PROVISIONS
1 1 Scope 1 1 Scope and definitions Equal
1 2 This Directive shall not apply to: Etc, etc
1 3 The following are excluded from the scope of this Directive: Etc, etc
Text modified. Equal consequences
2 1-14 Definitions 1 2 For the purposes of this Directive: [definitions] Nearly equal
15-32 Definitions New
3 Making available on the market and putting into service 2 Market surveillance Text modified. Equal consequences
4 Technical requirements 3 Technical requirements Text modified. Equal consequences
5 1 Free movement 4 1 Free movement Text modified. Equal consequences
5 2 Free movement 14 2 Free movement User inspectorate specified here as well. Equal consequences
5 3 Free movement 4 2 Free movement Text modified. Equal consequences
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 10 / 18 ILPED201468EU-201626
CHAPTER 2 - OBLIGATIONS OF ECONOMIC OPERATORS
6 Obligations of manufacturers New
7 Authorised representatives New
8 Obligations of importers New
9 Obligations of distributors New
10 Cases in which obligations of manufacturers apply to importers and distributors
New
11 Identification of economic operators New
5 Presumption of conformity Removed
6 Committee on technical standards and regulations Removed
8 Safeguard clause Removed
CHAPTER 3 - CONFORMITY AND CLASSIFICATION OF PRESSURE EQUIPMENT AND ASSEMBLIES
12 1 Presumption of conformity New, noted.
12 2 Presumption of conformity 11 4 European approval for materials Rewritten
13 1 Classification of pressure equipment 9 1 Classification of pressure equipment Revised.
9 2 Classification of pressure equipment Removed
13 1a Classification of pressure equipment New. I.c.w. Regulation 1272/2008.
13 1b Classification of pressure equipment 9 2 Classification of pressure equipment Revised.
13 2 Classification of pressure equipment 9 3 Classification of pressure equipment Nearly equal
14 Conformity assessment procedures 10 Conformity assessment Modified. Several Modules have new name and are modified:A2, B, C2. See Annex III for the modification of the Modules itself.
15 1 European approval for materials 11 1 European approval for materials Text modified. Equal consequences
15 2 European approval for materials 11 2 European approval for materials Text modified. Equal consequences
15 3 European approval for materials 11 3 European approval for materials Text modified. Equal consequences
15 4 European approval for materials New
15 5 European approval for materials 11 5 European approval for materials Text modified. Equal consequences
15 6 European approval for materials New
12 Notified bodies Removed
13 Recognized third-party organizations Removed
16 1 User inspectorates 14 1 User inspectorates Text modified. Equal consequences
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 11 / 18 ILPED201468EU-201626
16 2-7 User inspectorates 14 3-8 User inspectorates Text modified. Equal consequences
14 9-10 User inspectorates Removed
17 EU Declaration of conformity New
18 General principles of the CE marking New
CHAPTER 4 - NOTIFICATION OF CONFORMITY ASSESSMENT BODIES
15 1 CE marking Removed
19 1 Rules and conditions for affixing the CE marking 15 2 CE marking Text modified. Equal consequences
19 2 Rules and conditions for affixing the CE marking 15 3 CE marking Text modified. Equal consequences
15 4-5 CE marking Removed
19 3-6 Rules and conditions for affixing the CE marking New
20 Notification New
21 Notifying authorities New
22 Requirements relating to notifying authorities New
23 Information obligation on notifying authorities New
24 Requirements relating to notified bodies and recognised third-party organisations
New. Requirements to Notified Bodies are made more explicit.
25 Requirements relating to user inspectorates New
26 Presumption of conformity of conformity assessment bodies New. Definition of Presumption of Conformity.
27 Subsidiaries of and subcontracting by conformity assessment bodies
New. Requirements to subcontract at Notified Bodies are made more explicit.
28 Application for notification New. Application requirements(Renewal application!). Accrediation or evidence compliance with accreditation standard is a pre-requisite.
29 Notification procedure New. Procedure.
30 Identification numbers and lists of notified bodies New, noted.
31 Lists of recognised third-party organisations and user inspectorates
New, noted.
32 Changes to notifications New, noted.
33 Challenge of the competence of notified bodies, recognised third party organisations and user inspectorates
New, noted.
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 12 / 18 ILPED201468EU-201626
34 Operational obligations of notified bodies, user inspectorates and recognised third party organisations
New. Requirements to obligation at Notified Bodies are made more explicit.
35 Appeal against decisions of notified bodies, recognised third party organisations and user inspectorates
New. Requirements on Appeal at Notified Bodies are made more explicit.
36 Information obligation on notified bodies, recognised third party organisations and user inspectorates
New. Some additional info to be provided to Notifying authorities.
37 Exchange of experience New. For member states
38 Coordination of notified bodies, recognised third-party organisations and user inspectorates
New. For Commission and Member states
16 Unduly affixed CE marking Removed
17 Member States Removed
18 Decisions entailing refusal or restriction Removed
CHAPTER 5 - UNION MARKET SURVEILLANCE, CONTROL OF PRESSURE EQUIPMENT AND ASSEMBLIES ENTERING THE UNION MARKET, AND UNION SAFEGUARD PROCEDURE
39 Union market surveillance and control of pressure equipment and assemblies entering the Union market
New. For Commission and Member states
40 Procedure for dealing with pressure equipment or assemblies presenting a risk at national level
New. For Member states
41 Union safeguard procedure New. For Commission and Member states
42 Compliant pressure equipment or assemblies which present a risk
New. For Commission and Member states
43 Formal non-compliance New. For Commission and Member states
CHAPTER 6 - COMMITTEE PROCEDURE AND DELEGATED ACTS
44 1 Committee procedure 7 2 Committee on Pressure Equipment Text modified. Equal consequences
44 2-5 Committee procedure New. For Commission
44 5,1stp Committee procedure New. For Commission
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 13 / 18 ILPED201468EU-201626
44 5,2ndp Committee procedure 7 4 Committee on Pressure Equipment Text modified. Equal consequences
45 Delegated power 7 1 Committee on Pressure Equipment Text modified. Equal consequences
7 3 Committee on Pressure Equipment Removed
46 Exercise of the delegation New. For Commission
CHAPTER 7 - TRANSITIONAL AND FINAL PROVISIONS
47 Penalties New
19 Repeal Removed
20 1-2 Transposition and transitional provisions Removed
48 1 Transitional provisions 20 3 Transposition and transitional provisions Revised, noted.
48 2-3 Transitional provisions New, noted
49 Transposition New. - Article 13 to be implemented 28 February 2015 in National Legislation by Member states, entrance date 1 June 2015. - New PED 2014/68/EU to be implemented July 18th 2016 in National Legislation by Member States, entrance date July 19th 2016 .
50 Repeal New. Confirmation of repeals old PED parts.
51 Entry into force and application New. Entrance date new PED Directive (17 July 2014). Noted
52 Addressees 21 Addressees of the Directive Addressed to member states as PED to be implemented in National Legislations.
ANNEX I - ESSENTIAL SAFETY REQUIREMENTS
ANNEX I - ESSENTIAL SAFETY REQUIREMENTS
0 PRELIMINARY OBSERVATIONS No relevant changes
1 GENERAL No relevant changes
2 DESIGN
2.1 General No relevant changes
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 14 / 18 ILPED201468EU-201626
2.2 Design for adequate strength No relevant changes
2.3 Provisions to ensure safe handling and operation No relevant changes
2.4 Means of examination No relevant changes
2.5 Means of draining and venting No relevant changes
2.6 Corrosion or other chemical attack No relevant changes
2.7 Wear No relevant changes
2.8 Assemblies No relevant changes
2.9 Provisions for filling and discharge No relevant changes
2.10 Protection against exceeding the allowable limits of pressure equipment
No relevant changes
2.11 Safety accessories No relevant changes
2.12 External fire No relevant changes
3 MANUFACTURING
3.1 Manufacturing procedures No relevant changes
3.2 Final assessment No relevant changes
3.3 Marking and labelling No relevant changes
3.4 Operating instructions No relevant changes
4 MATERIALS
4.1 Materials for pressurised parts No relevant changes
4.2 The pressure equipment manufacturer No relevant changes
4.3 Materials used No relevant changes
SPECIFIC PRESSURE EQUIPMENT REQUIREMENTS
5 FIRED OR OTHERWISE HEATED PRESSURE EQUIPMENT WITH A RISK OF OVERHEATING AS REFERRED TO IN ARTICLE 4(1)
No relevant changes
6 PIPING AS REFERRED TO IN ARTICLE 4(1)© No relevant changes
7 SPECIFIC QUANTITATIVE REQUIREMENTS FOR CERTAIN PRESSURE EQUIPMENT
7.1 Allowable stresses No relevant changes
7.2 Joint coefficients No relevant changes
7.3 Pressure limiting devices, particularly for pressure vessels No relevant changes
7.4 Hydrostatic test pressure No relevant changes
7.5 Material characteristics No relevant changes
ANNEX II - CONFORMITY ASSESSMENT TABLES
ANNEX II - CONFORMITY ASSESSMENT TABLES
1 Modules No relevant changes
2 Safety Accessories No relevant changes
3 Pressure Accessories No relevant changes
4 Tables (9x) No relevant changes
ANNEX III - CONFORMITY ASSESSMENT PROCEDURES
ANNEX III - CONFORMITY ASSESSMENT PROCEDURES
Introductory wording Introductory wording No relevant changes
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 15 / 18 ILPED201468EU-201626
1 MODULE A: (INTERNAL PRODUCTION CONTROL) MODULE A: (INTERNAL PRODUCTION CONTROL)
1 Procedure No relevant changes
2 Technical documentation No relevant changes
3 Manufacturing No relevant changes
4 CE marking and EU declaration of conformity No relevant changes
5 Authorised representative No relevant changes
2 MODULE A2: INTERNAL PRODUCTION CONTROL PLUS SUPERVISED PRESSURE EQUIPMENT CHECKS AT RANDOM INTERVALS
MODULE A1: internal manufacturing checks with monitoring of the final assessment)
1 Procedure Revised
2 Technical documentation Revised
3 Manufacturing Revised
4 Final assessment and pressure equipment checks Revised
5 CE marking and EU declaration of conformity Revised
6 Authorised representative Revised
3 MODULE B: EU-TYPE EXAMINATION
3.1 EU-Type examination – Production Type MODULE B: EU-TYPE EXAMINATION
1 Explanation Revised
2 Procedure Revised
3 Manufacturer Revised
4 Notified Body Revised
5 Notified Body Evaluation Report Revised
6 EU Type-Examination Certificate Revised
7 Remain Type-Examination valid Revised
8 Inform Notifying Authority Revised
9 Archiving Application and Certification documents by Notified Body
Revised
10 Authorised representative Revised
3.2 EU-Type examination – Design Type MODULE B1: EC design-examination
1 Explanation Revised
2 Procedure Revised
3 Manufacturer Revised
4 Notified Body Revised
5 Notified Body Evaluation Report Revised
6 EU Type-Examination Certificate - 10 years Revised
7 Remain Type-Examination valid Revised
8 Inform Notifying Authority Revised
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 16 / 18 ILPED201468EU-201626
9 Archiving Application and Certification documents by Notified Body
Revised
10 Authorised representative Revised
4 MODULE C2: CONFORMITY TO TYPE BASED ON INTERNAL PRODUCTION CONTROL PLUS SUPERVISED PRESSURE EQUIPMENT CHECKS AT RANDOM INTERVALS
MODULE C1: conformity to type)
1 Procedure Revised
2 Manufacturing Revised
3 Final assessment and pressure equipment checks Revised
4 CE marking and EU declaration of conformity Revised
5 Authorised representative Revised
5 MODULE D: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS
MODULE D: production quality assurance
1 Procedure No relevant changes
2 Manufacturing No relevant changes
3 Quality system No relevant changes
4 Surveillance under the responsibility of the notified body No relevant changes
5 CE marking and EU declaration of conformity No relevant changes
6 Archiving by manufacturer No relevant changes
7 Inform Notifying Authority Revised
8 Authorised representative No relevant changes
6 MODULE D1: QUALITY ASSURANCE OF THE PRODUCTION PROCESS
MODULE D1: production quality assurance
1 Procedure No relevant changes
2 Technical documentation No relevant changes
3 Archiving by manufacturer No relevant changes
4 Manufacturing No relevant changes
5 Quality system No relevant changes
6 Surveillance under the responsibility of the notified body No relevant changes
7 CE marking and EU declaration of conformity No relevant changes
8 Archiving by manufacturer No relevant changes
9 Inform Notifying Authority Revised
10 Authorised representative No relevant changes
7 MODULE E: CONFORMITY TO TYPE BASED ON PRESSURE EQUIPMENT QUALITY ASSURANCE
MODULE E: product quality assurance
1 Procedure No relevant changes
2 Manufacturing No relevant changes
3 Quality system No relevant changes
4 Surveillance under the responsibility of the notified body No relevant changes
5 CE marking and EU declaration of conformity No relevant changes
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 17 / 18 ILPED201468EU-201626
6 Archiving by manufacturer No relevant changes
7 Inform Notifying Authority Revised
8 Authorised representative No relevant changes
8 MODULE E1: QUALITY ASSURANCE OF FINAL PRESSURE EQUIPMENT INSPECTION AND TESTING
MODULE E1: product quality assurance
1 Procedure No relevant changes
2 Technical documentation No relevant changes
3 Archiving by manufacturer No relevant changes
4 Manufacturing No relevant changes
5 Quality system No relevant changes
6 Surveillance under the responsibility of the notified body No relevant changes
7 CE marking and EU declaration of conformity No relevant changes
8 Archiving by manufacturer No relevant changes
9 Inform Notifying Authority Revised
10 Authorised representative No relevant changes
9 MODULE F: CONFORMITY TO TYPE BASED ON PRESSURE EQUIPMENT VERIFICATION
MODULE F: product verification
1 Procedure No relevant changes
2 Manufacturing No relevant changes
3 Verification No relevant changes
4 Verification of conformity by examination and testing of every item of pressure equipment
No relevant changes
5 CE marking and EU declaration of conformity No relevant changes
6 Affix Notified Body number during manufacturing No relevant changes
7 Authorised representative No relevant changes
10 MODULE G: CONFORMITY BASED ON UNIT VERIFICATION MODULE G: EC unit verification
1 Procedure No relevant changes
2 Technical documentation No relevant changes
3 Manufacturing No relevant changes
4 Verification No relevant changes
5 CE marking and EU declaration of conformity No relevant changes
6 Authorised representative No relevant changes
11 MODULE H: CONFORMITY BASED ON FULL QUALITY ASSURANCE
MODULE H: full quality assurance
1 Procedure No relevant changes
2 Manufacturing No relevant changes
3 Quality system No relevant changes
4 Surveillance under the responsibility of the notified body No relevant changes
5 CE marking and EU declaration of conformity No relevant changes
6 Archiving by manufacturer No relevant changes
DNV GL Headquarters, Veritasveien 1, P.O.Box 300, 1322 Høvik, Norway. Tel: +47 67 57 99 00. www.dnvgl.com
©2016/26 – DNV GL P. 18 / 18 ILPED201468EU-201626
7 Inform Notifying Authority Revised
8 Authorised representative No relevant changes
12 MODULE H1: CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION
MODULE H1: full quality assurance with design examination and special surveillance of the final assessment
1 Procedure No relevant changes
2 Manufacturing No relevant changes
3 Quality system No relevant changes
4 Design examination No relevant changes
5 Surveillance under the responsibility of the notified body No relevant changes
6 CE marking and EU declaration of conformity No relevant changes
7 Inform Notifying Authority Revised
8 Authorised representative No relevant changes
ANNEX IV - MINIMUM CRITERIA TO BE MET WHEN DESIGNATING THE NOTIFIED BODIES REFERRED TO IN ARTICLE 12 AND THE RECOGNIZED THIRD-PARTY ORGANIZATIONS REFERRED TO IN ARTICLE 13
Removed
ANNEX V - CRITERIA TO BE MET WHEN AUTHORIZING USER INSPECTORATES REFERRED TO IN ARTICLE 14
Removed
ANNEX VI - CE MARKING Removed
ANNEX IV - EU DECLARATION OF CONFORMITY (No XXXX) ( 1 )
ANNEX VII - DECLARATION OF CONFORMITY
1 - 8 Content requirement DoC example adjusted
ANNEX V PART A - Repealed Directive with list of the successive amendments thereto
New. Noted
PART B - Time-limit for transposition into national law and date of application
New. Noted
ANNEX VI - CORRELATION TABLE
97/23/EC and 2014/68/EU New. Noted