InfoPLC Top Ten S7 Tips and Tricks

8/9/2019 InfoPLC Top Ten S7 Tips and Tricks

1/56


2/56

Navigating the world of automationCopyright © Siemens Industry, Inc. 2011. All rights reserved.

Page 2

2011 Automation Summit

Title: Top Ten S7 Tips and Tricks

Track: NAPR

Topic: S7 PLCs

Presenter: Nick Shea

Company: DMC


3/56


Page 3

DMC Company Profile

Established in 1996, based in Chicago, IL Service Companies Nationally & Globally Siemens Solution Partner

Global Reach: CanadaChinaGeorgiaCzech Rep.RussiaPhilippinesMexicoIndia


4/56


Page 4

Bio

Nick Shea

Senior Project Engineer at DMC

Engineering Physics(University of Kansas)

With DMC since 2006


5/56


Top Ten S7 Tips and Tricks

You already know the fundamentals of S7 PLCprogramming…

And the mistakes to avoid (thanks, Tim)

Now, how do you develop, commission and

troubleshoot most efficiently?

Page 5


6/56


Page 6


If you are an…

External Developer :

How do you work most efficiently to provide the highestvalue for your customer while increasing project profitability?


7/56


Page 7


If you are an…

Internal Programmer :

How do you reduce start-up time for new equipment anddecrease production downtime while making modificationsor troubleshooting controls problems?


8/56


Page 8


Now… take your development to the next Level!


9/56


Page 9


Tips and Tricks for:

1. Rapid Diagnostics / Troubleshooting

2. Rapid Development

3. Advanced Tools


10/56

Navigating the world of automation

Modular, Object-OrientedArchitecture with FBs and UDTs

#1


11/56


Modular, Object-Oriented Architecture with FBsand UDTs

Best Practices for Controls Design – Generally Accepted

• Consistent Design and Documentation• Mechanical Design• Electrical Schematics• P&IDs• Software


12/56



Best Practices for Controls Design… also includes:

• PLC and HMI Projects• Naming conventions• Hardware architecture

• Modular Software Architecture• Function Blocks• UDTs


13/56



Line 1

Mixer 1

AgitatorVFD

DischargeValve

Mixer 2

AgitatorVFD

DischargeValve

Mixer 3

AgitatorVFD

DischargeValve

Ventilation

Damper

BlowerMotor

Conveying

PumpMotor

DistributionValve

System Architecture


14/56


15/56



Example of High-Level Function Block:fbMixer_1

fbVFD fbValve


16/56



Example of Device Level Function Block utilizing UDTs:


17/56



Variables encapsulated by udtHMI_VFD_Control


18/56



Variables encapsulated by udtErrors_VFD


19/56



Page 19

Motor CommandFunction Block

Start

Stop

Speed SP

Engage Brake

Reset Error

Acceleration

Motor I/OFunction Block

Start

Stop

Speed SP

Engage Brake

Reset Error

Acceleration

Outputs Inputs

One variable is usedto pass multiple

pieces of information

StartStopSpeed SPEngage BrakeReset Error

Acceleration

Motor CommandFunction Block

CommandMotor I/OFunction

Block

Command


20/56


Monitoring Instances of FunctionBlocks

#2


21/56


Monitoring Instances of Function Blocks

There are two PLC modes and they are toggled in the CPU Properties on the“Protection” tab: Process Mode and Test Mode.

Page 21

Default is Process mode.

Switch to Test Mode.

Download the hardware configuration.


22/56



This option is also shown in the Debug -> Operation dropdown menu from theLadder Editor

Page 22


23/56



Right- click on the block and select “Monitor with Call -Up Path”

Process Mode Test Mode

Page 23


24/56



Note!

As you probably expect, this does slow down the CPU cycle time so this shouldonly be used when necessary and always leave the final system with “ProcessMode” checked.

Page 24


25/56


Report System Error

#3


26/56


Report System Error

Siemens Support Website

FAQ: How can you report S7 system errors in WinCC?

FAQ: How can you have system error messages from a SIMATIC S7-300 / 400

displayed in WinCC flexible?

Page 26

https://support.automation.siemens.com/WW/llisapi.dll/22727527?func=ll&objId=24796673&objAction=csView&nodeid0=10805587&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontenthttps://support.automation.siemens.com/WW/llisapi.dll/22727527?func=ll&objId=24796673&objAction=csView&nodeid0=10805587&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontenthttps://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/adsearch/resultset.aspx?region=WW&lang=en&netmode=internet&ui=NDAwMDAxNwAA&term=How+can+you+have+system+error+messages+from+a+SIMATIC+S7-300+%2f+400+displayed+in+WinCC+flexible%3f&ID=22319131&ehbid=22319131https://support.automation.siemens.com/WW/llisapi.dll/22727527?func=ll&objId=24796673&objAction=csView&nodeid0=10805587&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontenthttps://support.automation.siemens.com/WW/llisapi.dll/22727527?func=ll&objId=24796673&objAction=csView&nodeid0=10805587&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontenthttps://support.automation.siemens.com/WW/llisapi.dll/22727527?func=ll&objId=24796673&objAction=csView&nodeid0=10805587&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=WW&load=treecontent


27/56


Report System Error

End Result:

No (0) programming required!

Page 27


28/56


Report System Error

10 easy steps: (website has screenshots and full instructions)

1. Create S7 and HMI stations .2. Add languages . Set “English” as default

3. Open the "Report System Error..." dialog in hardware configuration.4. Activate the entries . Choose the OB blocks that will generate messages5. Transfer blocks to the CPU. Download the generated blocks to the CPU. 6. Add a connection to the CPU from the WinCC flexible project (if needed)7. Configure alarm settings. Activate Simatic SFM in the alarm procedure.

8. Configure alarm viewer to include “S7 Alarms” 9. Activate the check boxes in CPU Messages from Simatic Manager10.Start WinCC flexible and enjoy your diagnostic messages!

Page 28


29/56


RAM Disk

#4


30/56


Copyright © Siemens Industry, Inc. 2011. All rights reserved.

RAM Disk

• When compiling an S7 project, many small files are read and written.• RAM Disk is RAM that is used as a disk drive – via 3 rd party software.• RAM Disk is orders of magnitude faster than other forms of storage media.• We’ve reduced >10 min compile times to


31/56


Auto-Generate Symbol Table

#5


32/56




Page 32

The S7 PLC symbol table allows copy/paste directly from a spreadsheet such asMS Excel.

• If possible, develop your IO list in a compatible format• Alternatively, build a tool to convert it to a compatible format

• For example, thousands of IO can be added into the symbol list in a fewminutes.


33/56




Page 33


34/56


Using Local Memory to ParseData

#6


35/56



Using Local Memory to Parse Data

Split data types into smaller pieces without using ST or SCL.

1. Assign a variable to TEMP memory.

2. Move data into the TEMP memory variable.

Page 35


36/56



Using Local Memory to Parse Data

Split data types into smaller pieces without using ST or SCL.

3. Access the TEMP or Local memory using the “L” prefix.

Page 36


37/56


Network Node Activating,Deactivating, and Monitoring

#7


38/56



Network Node Activating, Deactivating, andMonitoring

Dynamically activate and DeactivateProfibus and Profinet Nodes

Using “D_ACT_DP” SFC12

Examples:• Modular Machines• Alternate Machine Configurations

Page 38


39/56



Network Node Activating, Deactivating, andMonitoring

Monitoring Ethernet Nodes using “RDSYSST” SFC51

Page 39


40/56


Safety Programming

#8


41/56



Safety Programming

• Leverage Siemens safety blocks

Page 41


42/56



Safety Programming

• Safety program can be really simple or really complicated depending on theapplication.

• Example of implementing simple E-Stop safety functionality:

Page 42


43/56



Safety Programming

• Always ON and OFF variables available inside “F_GLOBDB” datablock.

Page 43


44/56


Backup DB Data by GeneratingSource

#9


45/56



Backup DB Data by Generating Source

A simple yet common problem when programming a Siemens Simatic S7-300PLC is losing the data already stored in the PLC after downloading an updateddata block.

Page 45


46/56




In the normal case:

If you are simply adding items to the end of a flat data block (not adding items toa user-defined type (udt) within the data block, for example) then to retain thevalues of the data block follow these quick steps.

1. Go online with all of the blocks in Simatic Manager.2. Copy the online version of the data block whose values you would like to

retain into your offline project.3. Add the items to end of the data block.4. Download - your values will be retained.

Page 46


47/56




A more complicated change to the data block such as adding items to a udtused with the data block requires extra steps. Even if you have first saved a copyof your online values prior to making the change, the values will be lost after yousave the change. Therefore, follow these extra steps.

1. Follow steps 1 and 2 above.2. Open the datablock and Generate Source for the data block.

File -> Generate Source. This will save a version of your data block;and the values in a file in the Sources folder.

Page 47


48/56




3. Make all changes that you need to the data block (not source code)then Save and Close the data block.

4. Open the Source file you created and compile it. This will set all values in thedata block equal to the values you see in the Source file.

5. Download - your values have been retained.

Page 48


49/56


Keyboard Shortcuts

#10


50/56



Keyboard Shortcuts

Navigating / Searching

Cross Reference: Ctrl-Alt-Q

Find: Ctrl-F

Find Variables within a FC or FB: Ctrl-Shift-F (search forward)or

Ctrl-Shift-B (search backward)

Jump to Network: Ctrl-E

Reference Data Interface: Ctrl-R

Open an FC or FB: Ctrl-Alt-O

Page 50


51/56



Keyboard Shortcuts

Development Shortcuts

New Empty Rung / Network: Ctrl-R

Normally open contact: F2Normally closed contact: F3Coil: F7

Empty Box: Alt-F9

Page 51


52/56



Keyboard Shortcuts

Monitoring / Diagnostics / Other Shortcuts

Monitor: Ctrl-F7

Module Information: Ctrl-D

Page 52


53/56



Keyboard Shortcuts

Monitoring / Diagnostics / Other Shortcuts

Operating Mode: Ctrl-I

Download: Ctrl-L

Page 53


54/56


Summary


55/56


Copyright © Siemens Industry, Inc. 2011. All rights reserved.Page 55

Summary – Top Ten S7 Tips and Tricks

1. Modular, Object-Oriented Architecture with FBs and UDTs

2. Monitoring Instances of Function Blocks

3. Report System Error

4. RAM Disk

5. Auto-Generate Symbol Table

6. Network Node Activating, Deactivating, and Monitoring

7. Safety Programming Basics

8. Using Local Memory to Parse Data

9. Backup DB Data by Generating Source

10. Keyboard Shortcuts


56/56


Thank You

Nick Shea

[email protected]

www.dmcinfo.com
http://www.dmcinfo.com/http://www.dmcinfo.com/

Documents

InfoPLC Top Ten S7 Tips and Tricks