Info FenOffice A4 40 Seiten - ProLogic › sites › default › files › Infomaterial › FenOffice_inf… · ProService (software support) 6 FenOfﬁ ce ProLogic Computer GmbH

ProAdmin

ProDesign

ProView

ProRepair

ProService

info

FenOffi ce

Step into the world of ProLogic

software for window construction

Software solutions integrated to fi t

The right choice for:window manufacturers and dealers, carpentry companies, carpenters and offi ce organisation.

2 FenOffi ce ProLogic Computer GmbH • Rinderfelder Straße 17 • D-97270 Kist • Germany

32bitSoftware for

window construction

Software

solutions

integrated

to fi t

Copyright © by ProLogic Computer GmbH

Rinderfelder Straße 17

D-97270 Kist

Germany

Nearly all hardware and software identifi ed in this brochure are registered

trademarks or are to be considered as such.

3FenOffi ceFon: +49 9306 9096-0 • Fax: +49 9306 9096-36 • e-mail: [email protected] • www.prologic-kist.de

32bitSoftware for

window construction

We see ourselves as an integrally-oriented contact partner for window-producing companies.

We are small enough to provide you with indi-vidualised and market-driven assistance and con-sulting.

We are large enough to support you in the entire palette of window production.

We are experienced enough to assist you in stra-tegic production planning in nearly all product areas.

We are creative, although one can never be creative enough, when it comes to developing independent production concepts that don’t just incorporate lists or online use.

We realise that good is not good enough. That’s why we are always looking for new ways for the market- and target group-oriented positioning of your product.

We listen to you!

ProLogic Computer GmbH

Our company is located in Kist, near Würzburg in southern Germany, nestled between Spessart and Rhon in Franconia.

Here – in inspiring surroundings – originate the ideas for our software pro-grams, from which we develop sophisticated and high quality programs using the latest technology.

Based on your knowledge of the requirements of your company, we develop all-encompassing and individual solutions. From market-oriented considerations, to integral planning and implementation – we can integrate our products, through knowledge of you, your company and your production, most effectively in your operating situation.

For us, full service means – We’re there for you!


32bitP

roLo

gic

FenOffi ce

Software for

window construction

Flexibility and speed will be the future prerequisites for

successful market positioning.

We should not underestimate the central signifi cance

of reliable business decisions, based on an optimal and

rapid overview of the company and the accurate distri-

bution of business information.

Electronic data processing and the use of new technol-

ogy are increasingly becoming the focus of success-ori-

ented corporate strategies.

It is necessary to face and master these challenges in or-

der to be prepared fort he competitive climate ahead.

Managing

communication

visualising

designs

in next

to no time


32bit

Pro

Logi

cSoftware for

window construction

ProAdmin – the universal instrument for your offi ce management.

At the centre is an effi cient address and article management.

Projects, contacts, dates and appointments as well as data from ex-

ternal documents can be linked together in the simplest ways.

An optimal solution for your business.

ProDesign – the new, logical advancement of the established Pro-

Logic window construction program. Wood, plastic or wood-alu-

minum windows are able to be constructed in all forms. The real-

istic representation of the windows gives the client/building owner

the assurance that his future windows will be delivered exactly as

he ordered them. Speed is no witchcraft.

ProRepair – the program for calculating the costs of repair glazing

for reporting them completely and exactly with the insurance com-

panies. Invoices are created according to the system used by the

Allianz-Versicherung (insurance company).

Finally, light in the thicket of charts and tables.

ProView – the program for digital altering of house and building

facades. You can insert and scale new objects (windows, doors,

winter gardens, etc.) into a background picture. Naturally, all the

other picture elements can also be altered. This is how a picture of

a future house is created.

Faithful to the motto: a picture says more than a thousand words.

Take precautions and avoid confl icts – the fundamental idea of our

software assistance. Differing from the classic “emergency offers”,

care is consistently taken and will be taken in the support structure

to approach all problem areas integrally and to parallelly fulfi l the

most individual demands.

Our experience is your competitive advantage.

ProAdmin (offi ce organisation)

ProDesign (window construction)

ProRepair (repair glazing)

ProView (facade design)

ProService (software support)


32bit

ProAdmin

Software for

window constructionof

fi ce

orga

nisa

tion

Effi cient customer care is at the centre of business in-

terests.

ProAdmin is a comprehensive and, above all, user-

friendly administration program fort he processing of

addresses, orders and articles. The various modules are

designed to ensure simple management of your business

information.

The existing database can be modifi ed whenever neces-

sary – new customers recorded, addresses and articles

changed or obsolete data removed.

Microsoft Offi ce compatibility and easy handling of ap-

pointments, order processing, invoicing and reminders,

warehouse management and much more, with unlimited

data transfer provided by the relational database.

Administration

means

sorting and

organising


32bitSoftware for

window construction

offi c

e or

gani

sati

on

Addresses

Desired selections can be carried out in the existing address base

through types of addresses, simplifying everyday work.

Complete details of the component will be clearly arranged and

presented in the article template.

Included data:

• basic data

• web and email addresses

• communication connections

• banking connections and data

• contacts

• external documents

• correspondence

• calculation parameters

• contact persons

• delivery and invoice addresses

Included data:

• basic data

• pricing per piece

• pricing per quantity unit

• pricing per packaging unit

• discount apiece or on quantity

unit

• sales volume summary

• connection to suppliers

• external documents

• NC parameter

• supplier allocation/assignment

• inventory data

• country-specifi c article texts

Articles


32bitSoftware for


fi ce

orga

nisa

tion

Procedures Pricing:

• fi xed price

• purchase price plus additional

fees

• price tables/charts

• price matrix

• history

• position

• discounts

• additional fees

• calculation

• payment procedures

• payments

• country-specifi c choice of

language

Procedures are, for example, offers, delivery notes and invoices.

Several procedures (e.g. offers) can also be clearly arranged and

administrated in one project.

ProjectsProcedures:

• offer

• order confi rmation

• production order

• delivery note

• invoice

• invoice for partial delivery

• adjusted invoice

• settled account invoice

• cumulative invoice for partial

delivery

• cancellation invoice

• reminder

• credit memo

• series administration

All projects are collected after one address. A project subdivides

itself into different procedures.


32bitSoftware for

window construction

offi c

e or

gani

sati

on

Microsoft WordMicrosoft Offi ce:

• edit procedures in MS Word

• export and import of price

lists

• order summaries

• article lists

• address lists

Procedures can simply be transferred into Microsoft Word.

The form of the document is positioned and controlled through a

confi gurable export manager.

Positions• windows

• dealer articles

• free positions

• repair work

• title design

• inserted texts

• subtotals

The included positions are shown in clearly arranged list rep-

resentations with relevant information. Further data regarding

detail information can be accepted and changed.

Position summary:


32bitSoftware for


fi ce

orga

nisa

tion

Arrangement of materials

• individual order

• centralised buying

• purchase order proposals

• suppliers

• dates and appointments

• confi rmation

• partial delivery

• delivery reminder

• material certifi cate

• stock movement

Never miss an appointment or forget a date again. Who is de-

livering what and when? The arrangement of materials provides

information regarding orders and deliveries.

Ordering:

ContactsCommunication:

Contact like telephone calls, discussions, customer letters, etc.,

are administrated centrally at the appropriate addresses. All ap-

pointments are available through the contact list. Planning in

advance is possible at any time!

• telephone calls

• conversations

• appointments

• Microsoft Outlook


32bitSoftware for

window construction

offi c

e or

gani

sati

on

Books of account

Payment transactions

• overall summary

• outstanding invoices only

• annual statement

• monthly lists

• weekly reports

• bank transfers

• cheques

• summary lists

The books of account enable the representation of all incoming

and outgoing invoices for a selectable timeframe.

Discount amounts are automatically accounted for upon the gen-

eration of bank transfers.

Invoices:

Creditors:

Debtors:

• payment administration

• instalment payments

• additional fees

• summary lists

• building deductions

• credit memos

DTAUS:

• direct debit

• bank transfers


32bitSoftware for


fi ce

orga

nisa

tion

Quantity analysis

Material statistics

Itemisation of all materials from manufacturing or production

orders grouped in the form of lists according to type of material.

Graphic comparison line-up of manufacturing-relevant informa-

tion covering a period of time.

• wood

• fi ttings

• glass

• profi les

• etc.

• wood

• PVC

• aluminum profi les

• glass

• fi ttings

• colours

Materials:

Positions:


32bitSoftware for

window construction

offi c

e or

gani

sati

on

Production load• procedure / project

• customer

• sales price value

• production time

• lots

Sales planning • sales representatives

• nominal / actual value com-

parison

• surplus

Sales input, invoice and order amounts are analysed and graphi-

cally represented for each sales representative.

Monthly summaries of the projects to be completed daily with

completion date.

Planning:

Resource / Capacities:


32bit

ProDesign

Software for

window constructionw

indo

w c

onst

ruct

ion

Regardless of whether you choose PVC or wooden win-

dows, independence is a key factor when it comes to the

construction and presentation of window systems.

ProDesign creates even the most complex window sys-

tems accurately to scale, providing both an interior and

exterior view, in next to no time at all. A key benefi t is

the automatic generation of numerous different scale di-

agrams. Special application options for calculation and

production fulfi l the time and cost-saving requirements

of modern businesses.

Construction

means

design

and

creation


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

Window systems

Window shapes

Window made of:

Frame shapes:

• wood

• PVC

• wood-aluminum

• metal

• rectangular

• rounded arch

• segmental arch

• pointed arch

• compound arch

• circular

• champfered

ProDesign is a modern construction program based on 32-bit plat-

forms. It is integrated into a comprehensive offi ce organisation.

The construction cycle is constantly shown in full scale on the

screen. The details are in outline mode or are visible with shaded

areas. Sources of error are checked in the preliminary stage and

reported with respective notifi cation.


32bit

►

Software for


indo

w c

onst

ruct

ion

Construction

Standard types

Construction:

• mullion

• transom

• extensions

• sash

• bars

• panels

The construction elements can be inserted directly into the win-

dow frames using “drag and drop” with the mouse. You also have

the possibility of changing the window via the keyboard.

Types:

• windows

• front doors

• catalogues

Every freely-constructed window can be saved as a standard type.

These types can be independently utilised or inserted into com-

plex constructions.


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

Profi lesProfi les for:

• frame parts

• mullion

• transom

• sash parts

• bars

• extensions

• panels

Parts for wooden windows are milled with different profi le tools.

FenOffi ce must know and correctly apply the different length and

end profi les.

• handle position

• gears

• corner bearing

• Scherenlager

• striker

• case

• striking plate

During the construction, the fi tting treatments can be presented

and checked, for example, for CNC machines.

Fittings:

Fittings treatment


32bitSoftware for


indo

w c

onst

ruct

ion

Interior arch

Front doors• ogee arch

• curved bars

• champfered bars

• side-frame with panels

• curved bars

• bars between the panes

• interior arch

Front door:

double-sash window:


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

Ogee arch

Y-shaped bars

• ogee arch

• curved bars

• panels

• cross bars

• circular window

• curved bars

• Y-shaped

double-sash window:

double-sash window:


32bitSoftware for


indo

w c

onst

ruct

ion

Champfered windows

Profi les• length profi le

• end profi le

• tool data

• adjustment values

champfered windows:

• wall measurement

• input of angles

• cutters

• mitres

Profi le data:

The joints between window and wall can be automatically mea-

sured through the wall measurements input.

The inspection and altering of length and end profi les are possible

with no problems at all.


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

AlignmentBars / Elements

Bars

• corners

• edges

• angles

• offset

• glass dividing

• attached

• Viennese bars

• between the panes

• bridges

• combinations

Bars, mullions and transoms can be aligned and set by a guide.

FenOffi ce administrates different types of user defi nable bars.

bar types:

Alignment:


32bitSoftware for


indo

w c

onst

ruct

ion

Wood-aluminum windows

Arch partitioning

• interior view

• exterior view

• multicoloured

• arch partitioning

• part widths

• frames

• sashes

Wood-aluminum windows:

Segments:

The windows are presented with the desired surface.

The determined arch partitioning can be easily modifi ed.


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

Corner jointsCorners:

• slot and tenon

• mitre

• backup profi les

• dowels

Arch elementArch shapes:

• rounded arch

• segmental arch

• compound arch

• circular

• pointed arch

The corner joint can be infl uenced for wood frames and alumi-

num frames, as well as for plastic windows.

Arch parts with different radii can be combined with and among

each other as desired.


32bitSoftware for


indo

w c

onst

ruct

ion

Front doors

Front doors

• wood

• wood-aluminum

• PVC

Profi le systems:

• notch construction

• side parts

• panels

Free construction:

• type catalogue

• price list

Standard types:


32bitSoftware for

window construction

win

dow

con

stru

ctio

n

Elements

Elements

• champfered windows

• standard windows with inte-

rior arches

6-part element:

• PSK standard type

• rounded arches

2-part element:


32bit

ProRepair

Software for

window constructionre

pair

gla

zing

Time as a cost factor in operational work cycles is what

makes the automation of a comprehensive and timely

repair calculation necessary in the fi rst place. Dealing

with insurance forms, charts and calculation advice is

time-consuming, even for those who are well-practised

in such matters. Offering a software solution which

meets the demands of modern communication is not

only the way to reach the goal of simplifying time-steal-

ing routine work, but also an integral part of the FenOf-

fi ce family from ProLogic.

Time is

using

seconds,

minutes,

hours


32bitSoftware for

window construction

repa

ir g

lazi

ng

Claims reporting Calculation according to:

• Frankfurter (Allianz)

insurance

With ProRepair, the costs of repair glazing with different insur-

ance companies can be administrated in a clear way and then

settled completely.

InvoicesInvoices:

• generation of the invoice

numbers

• terms of payment

• on screen preview


32bit

ProView

Software for

window constructionfa

cade

des

ign

Principle of advertising – make yourself over sevenfold,

sevenfold for the one you want to woo. Modern cus-

tomer service contains more than just a good technical

consultation. Because of the proliferation of the com-

puter medium, the complexity of applicable software

programs combined with a maximum of fl exibility are

increasing the chances of attaining customer loyalty. To

present colours, shapes, materials and components in

their entirety and to aim for a three-dimensional effect

of it is the task of the presentation program ProView.

Easing the customer’s decision-making – the decision

for you.

Present yourself and your company as an effi cient, com-

petent and innovative partner in matters of window and

door construction.

Make colours,

materials

and formats

visible.


32bitSoftware for

window construction

faca

de d

esig

n

Facade design Show the

future!

Be

creative!

Image editing

The windows are chosen from a catalogue and put into their posi-

tion. Shape and colour can be determined by the customer. You

show him the future facade immediately.

The program for image editing was developed specially for fa-

cade design. With it, facades and objects can be reworked later if

required. Not only the colours, but also the panels and the trans-

parency of the objects can be co-ordinated for the house front.


32bitSoftware for

window constructionfa

cade

des

ign

FacadesModels for

presentation.

Facades can be chosen from a sample catalogue or read in from

photos. They are the foundation for photo montages. The objects

are positioned upon them.

ObjectsModels for

photo montage.

Everything that can be positioned on facades for the presenta-

tion is taken up in the object catalogue. That means windows and

doors mainly; but also animals, plants, etc., are useful for facade

decoration. The objects can be created with the help of a scanner

or a digital camera. The facade design supports most common

image formats.


32bitSoftware for

window construction

faca

de d

esig

n

Entrance

Entrance

The digital

sample room.

The virtual

sample show.

A new house door is in order! But which? Wood or aluminum?

Modern or rustic, blue or yellow? You know the situation. What

to do? Manufacture and present all variations? But how will the

chosen element harmonise within the house facade of the future

owner?

Simply assemble the considered components in a digital house

facade of the customer. Show him the effect of colours and shapes

created by the different doors and windows on the house front.

For those who are completely undecided, you can print out the

photo montages that they can take home. Decisions require time!


32bit

ProService

Software for

window constructionso

ftw

are

supp

ort

Look ahead and prevent confl icts. It is no longer enough

to run a modern business with the purchase of high-

performance software alone. The rapid development

of operating systems and their specifi c system compo-

nents make the continuous modifi cation and updating

of applications just as necessary as their adjustment to

the increasing and changing requirements within your

company.

Malfunctions, competitive disadvantages, production

downtimes, delivery delays and reductions in profi t…

Are all good enough reasons for paying special attention

to “maintenance and service” when planning suitable

EDP concepts and the day-to-day use of software.

Service

means

functioning

smoothly


32bitSoftware for

window construction

soft

war

e su

ppor

t

Hotline

Remote maintenance

Speak

with us.

Stay

productive.

Call our hotline whenever you have questions about our program.

Speak with us preliminarily in the planning of new technologies.

Your telephone contact partners tend to your questions imme-

diately. No computer freaks, but rather experts who know their

craft. They will give you tips and make your work easier. They

will immediately help you and can also judge whether the „little

problems“ at issue are really problems. Many tasks can be quickly

solved in direct dialogue and then rectifi ed.

What happens to your business if the computer refuses to work?

The network doesn’t function anymore? Or the window post isn’t

the right length?

A servicer is often not immediately available or the access route

is too long. This wouldn’t happen if you decided on a software

maintenance agreement with remote maintenance. Then, it’s as if

you always have on hand at your business a “servicer”, who can

be helpful with disruptions. With no long downtime and travel

expenses.


32bitSoftware for

window constructionso

ftw

are

supp

ort

On site serviceWork

with our

experts.

Reduce

downtimes.

Machine operation

The ProLogic service personnel and sales partners from ProLogic

tend to all your questions regarding operations scheduling. We

will also advise you with respect to sorting and selecting the data

for the operated production machines. The settling of a new form

for offers is jointly designed. Malfunctions of hardware and soft-

ware can be localised and countermeasures can be immediately

introduced. In direct, personal conversation, no questions remain

open.

Production machines have a central function in companies, espe-

cially if data is transferred from a central computer and transmit-

ted „online“ to the machines. A breakdown almost always has a

serious effect on the entire production. Keeping these downtimes

as minimal as possible should be an essential point in the planning

of production concepts via data transfer. Speak with us. Together,

we will come up with an emergency plan to deal with disruptions

of this kind in the quickest time.


32bitSoftware for

window construction

soft

war

e su

ppor

t

Assurance

Success

Keep

up to date.

Plan

your success.

In order to keep software market-driven and effi cient, it must be

maintained at regular intervals and updated. Many users have

therefore decided on a software maintenance and update agree-

ment with ProLogic. The advantages are clear to see.

Through the increasing number of long-term satisfi ed users, the

effi ciency of ProLogic also increases. Because of this, your EDP

can be constantly advanced and improved. You have the assur-

ance that ProLogic steps in for you.

ProLogic tends to your EDP needs while you concentrate on your

business. With ProLogic you can plan for the long term. The

software maintenance conforms to your needs, which, over the

course of years, are ever changing. Functions which will make

your work easier tomorrow are being developed by us today, with

the most modern technologies and knowledge of the industry. In-

vest in your future and in your success.


32bitSoftware for

window constructionco

mm

unic

atio

n

ProAdmin is not an isolated solution

Quite the opposite – the data stored in ProAdmin can be transferred to nearly every Windows program. For this, there is a set of realized data exchange formats; how-ever individual data format transfers are possible, too. Following is a list of transfer possibilities which we’ve compiled as examples.

Microsoft Offi ceWord serial letters Word process export (DOC, RTF, PDF, HTML)Word individual documentsExcel materialsExcel fi ttingsOutlook contactsOutlook addresses

Financial accounting DATEV - accountingIBM-FiBu - accountingApertum accounting

Dealer and sales representativeinterfaceMaster data exportProject import / exportProcess import / exportAddress import / export

Material importComNorm importEuroAscii glassEuroAscii fi ttings

Links to ERPOPO - open invoice managementFiBu - fi nancial accountingMaWi - material accounting

Time managementOperational dataPost calculation

Payment transactionsRemittance slipCheque forms Online per DTAUS

drawingsVector - drawing export (WMF, EMF, DXF)Bitmap - drawing export (BMP, JPG, PNG)

Microsoft Offi ce is a universal program package for presenting individual data. Word, Excel and Outlook are probably the most well-known tools of this pack-age. These programs process different data types: texts, spreadsheets and ap-pointments.

Data import and data export are the comprehensive terms for dynamic in-formation exchange with other user programs. This contains mainly the data areas of the addresses, the articles and the projects.

Dealers need – on the one hand, mas-ter data from the production plants in order to construct with exact respect to details, and on the other, price lists for determining exact prices. Dealers keep in constant data exchange with the win-dow production plant.

By ERP we mean complete integrated software solutions for manufacturing, fi nances, logistics, staff (human re-sources), projects and selling, among other things. They offer functionality for all areas of a company. In addition, they consist of a number of modular and the simplest possible implementing components. ERP is the abbreviation for Enterprise Resource Planning.

Designs (sketches, drawings) are need-ed for different applications. Architects and certain end customers require the exterior view. For production, the inte-rior view of the windows is available.


32bitSoftware for

window construction

com

mun

icat

ion

Cross cut saw

Double mitre saw

Moulder

Profi ling machine

Tenoning machine

Stormproofi ng machine

Frame clamping machine

Cup hinge boring machine

Round arch milling machine

Backup milling machine

Cross bar milling machine

Doweling machine

Mortising machine

Produktion lines

CNC-machining centres

PVC-machining centres

Welding machine

Corner cleaning machine

Sash assembly centre

Inkjet printer

ProDesign not only prepares data for manufacturing lists; much of the construction data is needed for manufacturing or assembly machines. Thus, it is likely that these calculated values be transferred to automated production machines in electronic form.

saws

arbitrary bar-material

optimized / not optimized

Profi le coding, colour code

Angle / Schifter cuttings

glass border cuttings

solid wood processing

longitudinal profi les

end profi les

tool splitting

pegs (along and face)

drillings (along and face)

shaping

edge roundness (closed parapet wall)

shape and profi le changing

variable external bank profi les

variable interior bank profl ies

fi tting assembly

olive drillings

strikers

hinges

lock case milling

PVC windows

cut of the profi les and reinforcing

treatment of fi ttings

reinforcement

water slot routers

screw connection drillings

welding

corner cleaning


32bitSoftware for

window constructiondi

stri

buti

on

Roland Gerling

Mr Gerling

Lengfurter Str. 48

D-97892 Kreuzwertheim

tel. +49 9342 9297-0

fax +49 9342 9297-20

email: [email protected]

www.roland-gerling.de

m.p.network GmbH

Mr Lochmann

Wyssmattstraße 7a

CH-6010 Kriens

tel. +41 41 312 10 30

fax +41 41 312 10 32


www.mpnetwork.ch

ProLogic Handelsges.mbH

Mr Fahrafellner

Hohenegger Straße 9B

A-3386 Hafnerbach

tel. +43 2749 5376

fax +43 2749 5376-13


www.fenoffi ce.at

Greenteam Kft.

Mr Alpár

Varasd u. 16.

H-9700 Szombathely

tel. +36 94 510 830

fax +36 94 315 215


Jan Megier

Maschinen & Anlagen e.K.

Mr Megier

Hansestraße 74

D-38112 Braunschweig

tel. +49 531 2508664

fax +49 531 2508696


www.megier.biz

Rudolf Deye GmbH & Co.KG

Mr Allersmeier

Kurzekampstr. 17A

D-38104 Braunschweig

tel. +49 531 46688

fax +49 531 46693


www.deye-maschinen.com



D-97270 Kist

tel. +49 9306 9096-0

fax +49 9306 9096-36


www.prologic-kist.de

Contact person for Germany:

Mr Reuter

International contact person:

Mr Bullmann

ProLogic Europa


32bitSoftware for

window construction

mod

ules

features and modules of FenOffi ce Standard Professional Enterprise

S P EProAdminaddress administration ● ● ●extended address administration - ● ●list-printings over report generator - ● ●material administration ● ● ●supplier administration - ● ●extended fi ctitious articles - ● ●discount management - ● ●selling price calculation (special prices) - ● ●administration of auxiliary documents - ● ●target-times print - ● ●lists with report generator - ● ●project management ● ● ●project characteristics - ● ●completion of standard procedures ● ● ●extended procedure completion - ● ●process export to Microsoft Word ● ● ●process printing over report-generator - ● ●direct part-list printing ● ● ●sum positions ● ● ●user administration - ○ ●ability to clientele processing - - ●salesman - referred project fi lters - - ●server dongle - ○ ●data base on Microsoft SQL server - - ○application over terminal server - ○ ●ERP / PPS link-up - - ○ProDesignsingle materials type, including free-parts lists ● - -further materials types including free-parts lists ○ - -all materials - ○ ○free-parts lists - ○ ○free label-design ○ ○ ○administration of target-times - ● ●administration of fi tting sets ○ ● ●machine controlling - ○ ○optional auxiliary modules ○ ○ ○

contained licences 1 1 5licence packages /-steps 1 1 5

ProAdmin - Offi ce managementaddresses, materials, projects, business processesorder and stock controlprinter plug-in (HTML, PDF, RTF)debtors, lenders, dunningcontact managementmaterial statisticsuser managementduplicate address checkdealer interfacemanufacturer interfacerepair glazingtime managementpost calculation

ProDesign - window constructionelement combiningU-Wert calculationpre calculationwindow price listswindow cataloguebasic production listsproduction lists for wood, PVC, wood-aluminumstormproofi ng programcut optimization for rodsinch- / foot-capability

ProService - software supportservice contractupdate contracthotline serviceremote maintenanceon site servicein-house trainingfurther developmentindividual development

ProView - facade designproject previewwindow cataloguedoor catalogueaccessories catalogue

online data transferWeinig Nexus UC6, UC10, UT10, Univar, UC-MaticWeinig seriell UC10, UT10, UC-MaticSCM Method K, SuperSCM Windor 50, 20, 60SCM System 10Gubisch ESTH, CW3, CW6Stegherr FDE, DDKoch BL-51 NCKoch WindorKoch Windor / UCIMA CNCHomag BOFHarbsHaffner FLSHaffner sawsFerranti sawsSchüco sawsElumatec sawsRapid sawsRoob OptiCut

● available ○ optional - not available



D-97270 Kist

Germany

fon: +49 9306 9096 0

fax: +49 9306 9096 36

mail: [email protected]

internet: www.ProLogic-Kist.de

softwarefor

windowconstruction

Documents

Info FenOffice A4 40 Seiten - ProLogic › sites › default › files › Infomaterial › FenOffice_inf… · ProService (software support) 6 FenOfﬁ ce ProLogic Computer GmbH