8/17

Product Parts

1 - Rope2 - Blower (2 stakes included)3 - Heavy Duty Stakes (x8)4 - Inflatable Arch5 - Graphics (x3) Full Kit

Inflatable Arch Kit

Display Set-Up

Step 1 Lay out the Inflatable Arch (4) in your desired location. Locate the long inflate channel and connect it to the Blower (2) by wrapping and tying the attached straps to the neck of the Blower (2). Use two blower stakes to keep Blower (2) in vertical positon. Connect power and switch to the on position to inflate.

Step 2 Place leg or header Graphic (5) in desired location, turn Blower (2) off and while its deflating connect the hook and loop together of Graphic (5) and adjust as needed. Repeat the process of inflating and deflating to attach the remaining Graphics (5).

1

2

4

5

Step 3 Attach Rope (1) to all D-rings already attached to inflatable. Secure two opposite ends loosely with Heavy Duty Stakes (3). Stand display upright. Fully secure display with remaining Ropes (1) and Heavy Duty Stakes (3).

3

In�ate Channel

Care

Clean hardware with damp cloth and wipe dry. Clean graphics with damp cloth and wipe dry.